7/16 DIN Male Right Angle Connector Crimp/ Solder Attachment For PE-C600, 0.600 inch TECHNICAL DATA SHEET PE44543 7/16 DIN Male Right Angle Connector Crimp/Solder Attachment For PE-C600, 0.600 inch Configuration Connector Connector Interface Type Cable Attachment Method (Shield/Contact) Body Style 7/16 DIN Male PE-C600,0.600 inch Crimp/Solder Right Angle Electrical Specifications Frequency Range, GHz Impedance, Ohms Maximum VSWR Maximum Insertion Loss, dB Dielectric Withstanding Voltage, Vrms DC to 3 50 1.15:1 0.05 4,000 Mechanical Specifications Temperature Operating Range, deg C -40 to +85 Size Length, in [mm] Width/Dia., in [mm] Height, in [mm] 1.94 [49.28] 1.25 [31.75] 1.58 [40.13] Weight, lbs [g] 0.11 [49.9] Connector Type Contact Material and Plating Contact Plating Specification Outer Conductor Material and Plating Outer Conductor Plating Specification Coupling Nut Material and Plating Coupling Nut Plating Specification Hex Size, in. Torque, ft-lbs [Nm] Body Material and Plating Body Plating Specification Dielectric Type 7/16 DIN Male Brass, Silver 200µ in. minimum Brass, Tri-Metal 80µ in. minimum Brass, Tri-Metal 80µ in. minimum 1 1/4 18.417 [24.97] Brass, Tri-Metal 80µ in. minimum PTFE . Compliance Certifications (visit www.Pasternack.com for current document) RoHS Compliant Yes Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 7/16 DIN Male Right Angle Connector Crimp/Solder Attachment For PE-C600, 0.600 inch PE44543 PE44543 REV 01 1 7/16 DIN Male Right Angle Connector Crimp/ Solder Attachment For PE-C600, 0.600 inch TECHNICAL DATA SHEET PE44543 Plotted and Other Data Notes: Values at 25 °C, sea level 7/16 DIN Male Right Angle Connector Crimp/Solder Attachment For PE-C600, 0.600 inch from Pasternack Enterprises has same day shipment for domestic and International orders. Our RF, microwave and fiber optic products maintain a 99% availability and are part of the broadest selection in the industry. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 7/16 DIN Male Right Angle Connector Crimp/Solder Attachment For PE-C600, 0.600 inch PE44543 URL: http://www.pasternack.com/7-16-male-standard-pe-c600-0.600-connector-pe44543-p.aspx PE44543 REV 01 2 © 2013 Pasternack Enterprises All Rights Reserved PE44543 REV 01 CONTACT: SOLDER FERRULE: .610" HEX CRIMP TOOL CRIMP SIZE REQUIRED 3. CRIMP FERRULE & PRESS CAP DOWN. 2. INSTALL CABLE INTO BODY OF CONNECTOR AND SOFT SOLDER CENTER CONDUCTOR IN PLACE. 1. STRIP CABLE AS SHOWN. SLIDE FERRULE OVER CABLE. ASSEMBLY PROCEDURES FSCM NO. 53919 PE44543 DWG TITLE CAD FILE 032813-D SCALE N/A SIZE A 2233 NOTES: 1. UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE NOMINAL. 2. ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE AT ANY TIME. 3. DIMENSIONS ARE IN INCHES [mm]. 4. FITS MIL-C-17 AND EQUIVALENT CABLES. 7/16 DIN Male Right Angle Connector Crimp/Solder Attachment For PE-C600, 0.600 inch PE44543 CAD Drawing 3