Automotive Relays Plug-in Mini ISO Relays VF4A (Standard, Shrouded and Weatherproof) nPin assignment similar to ISO 7588 part 1 terminals nCustomized versions on request – Integrated components (e.g. resistor, diode) – Customized marking – Special covers (e.g. brackets, shrouded) nPlug-in Typical applications Cross carline up to 40A for example: ABS control, blower fans, car alarm, cooling fan, Electric Power Steering, energy management, engine control, fuel pump, heated front screen, lamps: front, rear, fog light, main switch/ supply relay, valves, wiper control. FVF4Aco_fcw1_bw Contact Data Contact arrangement 1 form C, 1 CO Rated voltage 12VDC Limiting continuous current, form A/form B NO/NC 23°C 60/45A 85°C 40/30A 125°C 17/12A Limiting making current1), form A/form B120/45A Limiting breaking current, form A/form B60/40A Limiting short-time current overload current, ISO 8820-32) 1.35 x 40A, 1800s 2.00 x 40A, 60s 6.00 x 40A, 1s Jump start test, ISO 16750-1 24VDC for 5min, conducting nominal current at 23°C Contact material silver based Min. recommended contact load3) 1A at 5VDC Initial voltage drop, form A (NO) contact at 40A, typ./max. 60/200mV form B (NC) contact at 30A, typ./max. 60/250mV Frequency of operation at nominal load 6 ops./min (0.1Hz) Operate/release time typ. 7/2ms4) Electrical endurance >1x105 ops. resistive load, form A (NO) contact 40A, 14VDC resistive load, form B (NC) contact 30A, 14VDC Contact Data (continued) Mechanical endurance >1x106 ops. 1) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of maximum 3s for a make/break ratio of 1:10. 2) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current. 3) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/ 4) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher risk of contact tack welding. Coil Data Rated coil voltage 12/24VDC Coil versions, DC coil Coil Rated Operate Release Coil Rated coil codevoltagevoltagevoltage resistance5)power5) VDCVDCVDC Ω±10%W F 12 7.21.290 1.6 H 2414.4 2.4360 1.6 5) Without components in parallel. All figures are given for coil without pre-energization, at ambient temperature +23°C. Coil operating range TEVF4_OVR1 Max. DC load breaking capacity Does not t the tempe the contac E = pre-en Does not take into account the temperature rise due to the contact current E = pre-energization. Load limit curve 1: arc extinguishes during transit time (changeover contact). Load limit curve 2: safe shutdown, no stationary arc (make contact). Load limit curves measured with low inductive resistors verified for 1000 switching events. 03-2012, Rev. 0312 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Automotive Relays Plug-in Mini ISO Relays VF4A (Standard, Shrouded and Weatherproof) (Continued) Insulation Data Initial dielectric strength between open contacts between contact and coil between adjacent contacts Other Data (continued) Terminal type plug-in, QC Cover retention axial force 150N pull force 200N push force 200N Terminal retention pull force 100N push force 100N resistance to bending 10N7) force applied to side 10N7) torque 0.3Nm Weightapprox. 35 to 60g (1.2 to 2.1oz) Packaging unit cover type VF4-1 357 pcs. VF4-4 200 pcs. VF4-5, VF4-6 110 pcs. 500Vrms 500Vrms 500Vrms Other Data EU RoHS/ELV compliance compliant Protection to heat and fire according UL94 UL94-HB or better Ambient temperature -40 to 125°C Category of environmental protection, IEC 61810 RT I (dustproof), RT III (sealed/sealed – shrouded) Degree of protection, IEC 60529 IP54 (dustproof), IP67 (sealed) IP67 (sealed – shrouded), only with special connector Vibration resistance (functional) IEC 60068-2-6 (sine sweep) 10 to 500Hz, min. 5g6) Shock resistance (functional) IEC 60068-2-27 (half sine) 11ms, min. 20g6) Drop test, free fall, IEC 60068-2-32 1m onto concrete 6) No change in the switching state >1ms. Valid for NC contacts, NO contact values significantly higher. 7) Values apply 2mm from the end of the terminal. When the force is removed, the terminal must not have moved by more than 0.3mm. Accessories For details see datasheet Connectors for Mini, Mini (Shrouded) and Maxi ISO Relays Terminal Assignment CO 1 form C, 1 CO 85 COD 1 form C, 1 CO with diode 87 87a 85 30 86 COR 1 form C, 1 CO with resistor 87 87a 85 30 86 87 87a 30 86 Dimensions VF4A with dust cover VF4-1**** (without bracket) and VF4-4**** (with bracket) View of the terminals (bottom view) 28.0 MAX. 6.0 15.0 Terminal thickness 0.81 + 0.03 5.0 8.0 16.2 28.0 MAX. 3.1 ˉ 5.3 16.8 30 87A 86 25.5 MAX. 87 85 11.5 MAX. 8.4 17.9 6.3 2 03-2012, Rev. 0312 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. 6.3 TE1344-I2 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 6.4 Automotive Relays Plug-in Mini ISO Relays 0.39 MAX. VF4A (Standard, Shrouded and Weatherproof) (Continued) 11.5 MAX. 12.25 Dimensions 4.1 MAX. 4.25 VF4A with shrouded dust cover VF4-2**** (without bracket) and VF4-5**** (with bracket) 18.6 9.0 View of the terminals (bottom view) 6.3 TYP. 4.0 TE1347-82 9.0 22.5 32.0 MAX. 6.4 30 0.39 0.39 MAX. MAX. 16.6 ±0.15 6.6 9.0 12.25 12.25 7.25 87 11.5 11.5 MAX. MAX. 7.25 8.0 4.1 MAX. 4.1 MAX. 4.25 6.3 TYP. 6.3 TYP. 4.5 18.5 ±0.25 32.0 MAX. 32.0 MAX. 4.0 25.0 MAX. 25.0 MAX. 17.9 86 85 87A 8.4 4.25 32.0 MAX. 25.0 MAX. 18.6 22.5 6.4 7.25 45.0 ±0.5 16.8 4.0 4.20 ±0. TE1347-82 TE1347-82 11.5 MAX. 32.0 MAX. 32.0 MAX. 30 30 6.3 19.7 ±0.15 7.5 ±0.45 36.1 MAX. 86 36.1 MAX. 16.6 ±0.15 8.4 87 87 6.6 86 8.4 85 85 VF4A with weatherproof cover 87Abracket) 17.9 17.9(with bracket) VF4-3**** (without 87A and VF4-6**** 9.0 8.0 4.5 8.0 4.5 16.8 16.8 18.5 ±0.25 30 45.0 ±0.5 85 87a 17.9 4.20 ±0.15 8.4 87 86 11.5 MAX. 8.0 6.3 19.7 ±0.15 7.5 ±0.45 12.0 ±0.38 36.1 MAX. 36.1 MAX. 11.50 ±0.15 16.8 7.0 REF. TE1348-91 30 85 87a 17.9 8.4 87 86 8.0 12.0 ±0.38 16.8 03-2012, Rev. 0312 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3 Automotive Relays Plug-in Mini ISO Relays VF4A (Standard, Shrouded and Weatherproof) (Continued) Product code structure Typical product code Type VF4A VF4A Cover type 1 Dust cover standard 2 3 Weatherproof cover standard 4 5 Shrouded dust cover with bracket 6 Contact arrangement 5 1 form C, 1 CO Coil F 12VDC H Contact material 11 Silver based 21 Coil suppression S01 Resistor in parallel (680Ω) S05 S08 Resistor in parallel (2700Ω) Product code Arrangement Cover VF4 -1 5 F 11-S01 Shrouded dust cover standard Dust cover with bracket Weatherproof cover with bracket 24VDC Silver based for capacitive loads Diode in parallel (cathode 86) Coil suppr. Circuit1)Coil Cont. material Terminals Part number VF4A-15F11 1 form C, Standard CO 12VDC Silver based Plug-in, QC VF4A-15F11-S01 1 CO Resistor 680Ω COR Diode (cathode 86)COD VF4A-15F11-S05 VF4A-15F21-S01 Resistor 680Ω COR Silver based2) VF4A-15H11 CO 24VDC Silver based VF4A-15H11-S08 Resistor 2700Ω COR VF4A-45F11 Bracket CO 12VDC VF4A-45F11-S01 Resistor 680Ω COR VF4A-45H11 CO 24VDC VF4A-55F11-S01 Shrouded Resistor 680Ω COR 12VDC VF4A-65F11-S01 Weatherproof VF4A-65H11-S08 Resistor 2700Ω 24VDC 6-1393298-0 6-1393298-4 6-1393298-5 7-1393298-3 8-1393298-1 5-1393305-7 8-1393298-8 1-1393302-0 1-1393302-1 8-1393305-7 9-1393305-5 9-1393305-9 1) See terminal assignment diagrams. 2) Special contact material for capacitive loads. Other types on request. This list represents the most common types and does not show all variants covered by this datasheet. 4 03-2012, Rev. 0312 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.