CN-A24 Series 50 & 100W 14.4 to 36VDC Input DC-DC Converters Features 14.4 - 36VDC Input IEC 61373 Shock and Vibration Base-plate Cooled Full Power at 100°C base plate Small Size Quarter Brick Footprint Wide input range Key Market Segments & Applications Specifications Model Nominal Output Voltage Input Voltage Range Input Current Output Voltage Adjustment Ripple & Noise (max) pk-pk Line Regulation (max) Load Regulation (max) Overcurrent Protection Overvoltage Protection Remote Sense Remote On/Off Operating Temperature Storage Temperature Temperature Coefficient Humidity (non condensing) Cooling Withstand Voltage Isolation Resistance Vibration (1) Shock (1) Safety Agency Certifications Weight (Typ) Size (WxHxD) Warranty VDC VDC A VDC mV mV mV % % °C °C %/°C %RH VAC - 5V 12V 24V 14.4 - 36VDC (40V transient for 3 seconds) 2.48 - 4.91A (model dependant) 4.5 - 6 10.8 - 13.2 21.6 - 26.4 100 150 240 20 48 96 40 96 192 105 - 140% 125 - 145% (Cycle input or remote on/off to reset) Yes Yes; Low = ON, Open = OFF -40°C to +100°C Baseplate -40°C to +100°C 0.02%/°C 5 - 95% RH Operating and Non Operating Conduction (See Installation Manual for heatsink selection) Input to Base-plate: 2kVAC; Input to Output 3.0kVAC for I min.; Output to Base-plate: 500VAC for 1 min >100M at 25C and 70%RH, Output to Base plate 500VDC Non Operating, 10-55Hz (sweep for 1 min.) Amplitude 0.825mm constant (Max 49 m/s2) X,Y,Z 1 hour each IEC61373 - Category 1, Grade B 196.1m/s2, IEC61373 - Category 1, Grade B UL60950-1, CSA60950-1, EN60950-1 g 70g in(mm) 1.45 x 0.5 x 2.28” (36.8 x 12.7 x 57.9) yrs 5 Years Note: See Installation Manual for full details, test methods of parameters and application notes (1) Compliant to EN50155 & IEC60571 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 192 Disclaimer: us.tdk-lambda.com/lp/legal.htm CN-A24 Series Model Selector Model CN50A24-5 CN100A24-5 CN50A24-12 CN100A24-12 CN50A24-24 CN100A24-24 Voltage (V) 5 5 12 12 24 24 Output Current (A) 10 20 4.2 8.4 2.1 4.2 Outline Drawing Maximum Power (W) 50 100 50.4 100.8 50.4 100.8 Input Current (A) 2.48 4.91 2.47 4.83 2.47 4.83 Efficiency (%) (100% load, 24VDC In) 85 86 86 88 86 88 Option Suffix Description /CO Pcb coating for EN50155 & IEC60571 compliance Example CN50A24-5/CO For Additional Information, please visit us.tdk-lambda.com/lp/products/cn-series.htm 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 193 Revision A6: Sept 2013