TOSHIBA TTC012

TTC012
Bipolar Transistors
Silicon NPN Triple-Diffused Type
TTC012
1. Applications
•
High-Speed High-Voltage Switching
•
Switching Voltage Regulators
•
High-Speed DC-DC Converters
2. Features
(1)
High speed switching : tf = 0.15 µs (typ.) (IC = 0.5 A)
(2)
High collector breakdown voltage: VCES = 800 V , VCEO = 375 V
3. Packaging and Internal Circuit
1. Base
2. Collector
3. Emitter
New PW-Mold2
)
25
4. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25
Characteristics
Symbol
Rating
Unit
VCBO
800
V
Collector-emitter voltage
VCES
800
Collector-emitter voltage
VCEO
375
Emitter-base voltage
VEBO
8
Collector-base voltage
Collector current (DC)
(Note 1)
IC
2.0
Collector current (pulsed)
(Note 1)
ICP
3.0
Base current
A
IB
1.0
PC
1.1
W
Junction temperature
Tj
150

Storage temperature
Tstg
-55 to 150
Collector power dissipation
(Ta = 25)
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Ensure that the junction temperature does not exceed 150.
1
2012-08-27
Rev.1.0
TTC012
5. Electrical Characteristics
)
5.1. Static Characteristics (Unless otherwise specified, Ta = 25
25
Characteristics
Collector cut-off current
Emitter cut-off current
Symbol
Test Condition
ICBO
VCB = 800 V, IE = 0 A
Min
Typ.
Max
Unit


10
µA
IEBO
VEB = 8 V, IC = 0 A


100
nA
Collector-base breakdown voltage
V(BR)CBO
IC = 1 mA, IE = 0 A
800


V
Collector-emitter breakdown voltage
V(BR)CEO
IC = 10 mA, IB = 0 A
375


hFE(1)
VCE = 5 V, IC = 1 mA
80

250
hFE(2)
VCE = 5 V, IC = 0.3 A
DC current gain
DC current gain

100

200
Collector-emitter saturation voltage
VCE(sat)
IC = 0.5 A, IB = 62.5 mA


0.5
Base-emitter saturation voltage
VBE(sat)
IC = 0.5 A, IB = 62.5 mA


1.3
Min
Typ.
Max
Unit

0.1

µs

4.4


0.15

V
)
5.2. Dynamic Characteristics (Unless otherwise specified, Ta = 25
25
Characteristics
Switching time (rise time)
Switching time (storage time)
Switching time (fall time)
Symbol
tr
tstg
tf
Test Condition
See Figure 5.2.1.
VCC ≈ 200 V, RL = 400 Ω,
IB1 = 62.5 mA, IB2 = 125 mA,
Duty cycle ≤ 1%
Fig. 5.2.1 Switching Time Test Circuit
6. Marking (Note)
Fig. 6.1 Marking
Note:
A line under a Lot No. identifies the indication of product Labels.
Not underlined: [[Pb]]/INCLUDES > MCV
Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product.
The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on
the restriction of the use of certain hazardous substances in electrical and electronic equipment.
2
2012-08-27
Rev.1.0
TTC012
7. Characteristics Curves (Note)
Fig. 7.1 IC - VCE
Fig. 7.2 IC - VCE
Fig. 7.3 hFE - IC
Fig. 7.4 VCE(sat) - IC
Fig. 7.5 VBE(sat) - IC
Fig. 7.6 IC - VBE
3
2012-08-27
Rev.1.0
TTC012
Fig. 7.7 rth(j-a) - tw
(Guaranteed Maximum)
Fig. 7.8 Safe Operating Area
(Guaranteed Maximum)
Note:
The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
4
2012-08-27
Rev.1.0
TTC012
Package Dimensions
Unit: mm
Weight: 0.36 g (typ.)
Package Name(s)
TOSHIBA: 2-7J2S
Nickname: New PW-Mold2
5
2012-08-27
Rev.1.0
TTC012
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible
for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which
minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage
to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate
the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA
information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the
precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application
with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,
including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating
and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample
application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation,
equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles,
trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices,
elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales
representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products
(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and
regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration
Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all
applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
6
2012-08-27
Rev.1.0