MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT Product Facts ■ Excellent signal isolation, stable insertion loss and low VSWR. ■ Provide repeatable RF performance at frequencies up to the 3 GHz. level (MW3/MW3HP), 4 GHz. level (MW4/MW4HP) & 6 GHz. level (MW6/MW6HP). ■ Standard versions for applications ranging from wireless communications to precision high-speed test equipment. ■ High performance (HP) versions for use under more demanding environmental conditions. ■ Standard or sensitive (S) coils are offered in a range of DC input voltages. ■ 2 Form C (DPDT) contacts rated low-level to 1 amp. ■ Extended mechanical life expectancy of 10 million opertions. ■ Robust, hermetically sealed enclosure. These CII relays provide microwave frequency switching in a hermetically sealed, subminiature package. Both standard and high performance models are offered in 3 GHz., 4 GHz. and 6 GHz. types. Standard models (MW3, MW4 and MW6) perform in temperature ranges from -55°C to +85°C and withstand 10G vibration and 30G shock. High performance models (MW3HP, MW4HP and MW6HP) offer extended temperature ratings of -65°C to +125°C while providing 30G’s vibration and 100G’s shock (75G’s for MW3) environmental ratings. Signal isolation is 18dB at 6 GHz. (MW6/MW6HP), 18dB at 4 GHz. (MW4/MW4HP), and 22dB at 3 GHz. (MW3/MW3HP). All are available with either standard or sensitive DC coils. Nominal coil power is 367-500mW (model dependent) for standard coils and 169-250mW for sensitive coils. VSWR is a low 1.30:1 @ 6GHz. for MW6/MW6HP, 1.36:1 @ 4GHz. for MW4/MW4HP, and 1.24:1 @ 3GHz. for MW3/MW3HP. Insertion loss is 0.38dB for MW6/MW6HP, 0.27dB for MW4/MW4HP, and 0.36dB for MW3/MW3HP. © 2003 by Tyco Electronics Corporation. All Rights Reserved. CII and TYCO are trademarks. 1 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT (Continued) MW3 & MW3HP Models 3 GHz. Switching Electrical Characteristics Contact Ratings Contact Arrangement: 2 Form C (DPDT) Contact Load Type 1.0A @ 28VDC Resistive 100,000 200mA @ 28VDC (300mH)* Inductive 100,000 30µA @ 50mVDC Low Level 10,000,000 Contact Resistance: Before life: 100 milliohms, max (measured @ 10mA @ 6VDC.) After life: 200 milliohms, max (measured @ 1A @ 28VDC.) Operations (min.) * The inductive rating is only applicable to high performance models (MW3HP and MW3HPS). Mechanical Life Expectancy: 10 million operations Coil Voltages: 5, 12, 18 & 26.5VDC (MW3) 5, 6, 9, 12, 18 & 26.5VDC (MW3HP) Coil Power (mw max @25°C): MW3 MW3S MW3HP MW3HPS 675 565 673 563 Duty Cycle: Continuous Coil Data MW3 Models Nominal Coil Voltage (VDC) Coil Resistance In Ohms ±20% @ 25°C Pickup Voltage VDC (Max.) @ 25°C Nominal Coil Power (mw) @ 25°C Maximum Coil Voltage Coil Designator 5.0 50 3.6 500 5.8 5 12.0 390 8.4 369 16.0 12 18.0 880 13.0 368 24.0 18 26.5 1,560 17.0 450 32.0 26 Standard Coil Pick-up Voltage: MW3: Approx 70% of nominal. MW3HP: Approx 50% of nominal. Pick-up Sensitivity (mw max @25°C): MW3 MW3S MW3HP MW3HPS 180 90 146 68 Sensitive Coil 5.0 100 3.5 250 7.5 5 12.0 850 9.0 169 20.0 12 Operating Characteristics 18.0 1,600 13.5 203 30.0 18 Timing: Operate Time (ms max.) MW3 MW3S MW3HP MW3HPS 4.0 6.0 2.0 4.0 Release Time (ms max.) MW3 MW3S MW3HP MW3HPS 3.0 3.0 1.5 2.0 Bounce Time (ms max.) MW3 MW3S MW3HP MW3HPS – – 1.5 1.5 26.5 3,300 18.0 213 40.0 26 Dielectric Withstanding Voltage: Between Open Contacts, Between Adjacent Contacts and Between Contacts and Coil: MW3 types: 350Vrms, 60 Hz. MW3HP types: 500Vrms, 60 Hz. Insulation Resistance: 1,000 megohms @ 500VDC. Environmental Characteristics Temperature Range: MW3 types: -55°C to +85°C. MW3HP types: -65°C to +125°C. MW3HP (High Performance) Models Nominal Coil Res. Pickup V Coil Voltage in Ohms VDC (Max.) (VDC) ±10% @ 25°C @25°C Release V VDC (Max.) @25°C Release V VDC (Min.) @25°C Nominal Coil Power (mw) @25°C Maximum Coil Voltage Coil Designator Standard Coil 5.0 50 2.7 1.4 0.22 500 5.8 5 6.0 98 3.5 2.0 0.28 367 8.0 6 9.0 220 5.3 3.0 0.54 368 12.0 9 12.0 390 7.0 4.0 0.63 369 16.0 12 18.0 880 10.5 6.0 0.91 368 24.0 18 26.5 1,560 14.2 8.0 1.37 450 32.0 26 5.0 100 2.6 1.4 0.23 250 7.5 5 6.0 200 3.4 2.0 0.28 180 10.0 6 9.0 400 4.85 3.0 0.55 203 15.0 9 12.0 850 7.0 4.0 0.64 169 20.0 12 18.0 1,600 9.8 6.0 0.92 203 30.0 18 26.5 3,300 14.0 8.0 1.4 213 40.0 26 Sensitive Coil Weight: MW3, MW3HP: 0.09 oz. (2.55 g) MW3S, MW3HPS: 0.12 oz. (3.40 g). Vibration Resistance: MW3 types:10 G’s, 10-500 Hz. MW3HP types: 30 G’s, 10-3,000 Hz Shock Resistance: MW3 types:30 G’s, 6 ± 1 ms. MW3HP types: 75 G’s, 6 ± 1 ms. 2 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT (Continued) MW3 & MW3HP Models 3 GHz. Switching Insertion Loss & VSWR: NC Contacts Insertion Loss & VSWR: NO Contacts (dB) VSWR (dB) Isolation VSWR 0.0 2.0 0.0 2.0 0.1 1.9 0.1 1.9 INSERTION LOSS INSERTION LOSS 1.8 0.2 0.3 1.7 0.3 1.7 0.4 1.6 0.4 1.6 0.5 1.5 0.5 1.5 0.6 1.4 0.6 1.4 0.7 1.3 0.7 1.3 0.8 1.2 0.8 1.1 0.9 1.0 1.0 0.2 VSWR 0.9 1.0 0 0.5 1.0 1.5 2.0 2.5 3.0 1.8 1.2 VSWR 0 0.5 FREQUENCY (GHz) 1.0 1.5 (dB) 0 -10 -20 ISOLATION -30 -40 1.1 2.0 2.5 1.0 3.0 -50 0 0.5 FREQUENCY (GHz) 1.0 1.5 2.0 2.5 3.0 FREQUENCY (GHz) Test Conditions Test Board: 0.031” double sided copper clad, PTFE based laminate. Connections: Relay header is soldered to ground place. Relay terminals are soldered to through holes. SMA connectors are soldered to circuit traces. Temperature: Room ambient. Signal Strength: 0 dBm. Notes: 1. Unused terminals were terminated with 50 ohm impedance load. 2. All readings are typical. Header Enclosures .370 (9.40) DIA MAX .031 ± .003 (0.79) .335 (8.51) DIA MAX .335 (8.51) DIA MAX .035 ± .010 (0.89) .370 (9.40) DIA MAX .031 ± .003 GROUND PIN (0.79) (OPTIONAL) .035 ± .010 (0.89) .385 (9.78) MAX .275 (6.99) MAX 36°+ 3° TERMINAL A = .750 MIN (19.05) P = .187±.010 (4.75±.25) +.002 -.001 (0.43) DIA .370 (9.40) DIA MAX .370 (9.40) DIA MAX MW3 / MW3HP MW3S / MW3HPS Part Numbering System .200 DIA (5.08) 36°+ 3° Ground Pin Position “G” .017 .017 +.002 -.001 (0.43) DIA .200 DIA (5.08) GROUND PIN (OPTIONAL) Ground Pin Position “E” For other ground pin configurations consult factory. Header and Terminal Finish: Nickel plated on MW3 & MW3S. Tin-lead plated on MW3HP & MW3HPS. Wiring Diagram Typical Part Number MW3 S – 5 A Series: MW3 = 3 GHz. switching relay MW3HP = High performance 3 GHz. switching relay Coil Sensitivity: Leave Blank = Standard Coil S = Sensitive Coil Coil Designator: 5 = 5VDC 6 = 6VDC† 9 = 9VDC† 12 = 12VDC 18 = 18VDC 26 = 26.5VDC † 6 and 9 volt coil only available on high performance models. Terminal Length: A = 0.750 in (19.05 mm) P = 0.187 ± 0.010 in (4.75 ± 0.25 mm) Ground Pin Position (see header drawings above): G = Opposite locating tab E = Near locating tab. Consult factory for other ground pin configurations. G Terminal View 3 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT (Continued) MW4 & MW4HP Models 4 GHz. Switching Electrical Characteristics Contact Ratings Contact Arrangement: 2 Form C (DPDT) Contact Load Type 1.0A @ 28VDC Resistive 100,000 200mA @ 28VDC (300mH)* Inductive 100,000 30µA @ 50mVDC Low Level 10,000,000 Contact Resistance: Before life: 100 milliohms, max (measured @ 10mA @ 6VDC.) After life: 200 milliohms, max (measured @ 1A @ 28VDC.) Operations (min.) * The inductive rating is only applicable to high performance models (MW4HP and MW4HPS). Mechanical Life Expectancy: 10 million operations Coil Voltages: 5, 12, 18 & 26.5VDC (MW4) 5, 6, 9, 12, 18 & 26.5VDC (MW4HP) Coil Power (mw max @25°C): MW4 MW4S MW4HP MW4HPS 675 565 673 563 Duty Cycle: Continuous Coil Data MW4 Models Nominal Coil Voltage (VDC) Coil Resistance In Ohms ±20% @ 25°C Pickup Voltage VDC (Max.) @ 25°C Nominal Coil Power (mw) @ 25°C Maximum Coil Voltage Coil Designator Standard Coil Pick-up Voltage: MW4: Approx 70% of nominal. MW4HP: Approx 50% of nominal. Pick-up Sensitivity (mw max @25°C): MW4 MW4S MW4HP MW4HPS 180 90 123 68 5.0 50 3.6 500 5.8 5 12.0 390 8.4 369 16.0 12 18.0 880 13.0 368 24.0 18 26.5 1,560 17.0 450 32.0 26 Sensitive Coil 5.0 100 3.5 250 7.5 5 12.0 850 9.0 169 20.0 12 Operating Characteristics 18.0 1,600 13.5 203 30.0 18 Timing: Operate Time (ms max.) MW4 MW4S MW4HP MW4HPS 4.0 6.0 2.0 4.0 Release Time (ms max.) MW4 MW4S MW4HP MW4HPS 3.0 3.0 1.5 2.0 Bounce Time (ms max.) MW4 MW4S MW4HP MW4HPS – – 1.5 1.5 26.5 3,300 18.0 213 40.0 26 Dielectric Withstanding Voltage: Between Open Contacts, Between Adjacent Contacts and Between Contacts and Coil: MW4 types: 350Vrms, 60 Hz. MW4HP types: 500Vrms, 60 Hz. Insulation Resistance: 1,000 megohms @ 500VDC. Environmental Characteristics Temperature Range: MW4 types: -55°C to +85°C. MW4HP types: -65°C to +125°C. MW4HP (High Performance) Models Nominal Coil Res. Pickup V Coil Voltage in Ohms VDC (Max.) (VDC) ±10% @ 25°C @25°C Release V VDC (Max.) @25°C Release V VDC (Min.) @25°C Nominal Coil Power (mw) @25°C Maximum Coil Voltage Coil Designator Standard Coil 5.0 50 2.7 1.4 0.22 500 5.8 5 6.0 98 3.5 2.0 0.28 367 8.0 6 9.0 220 5.3 3.0 0.54 368 12.0 9 12.0 390 7.0 4.0 0.63 369 16.0 12 18.0 880 10.5 6.0 0.91 368 24.0 18 26.5 1,560 14.2 8.0 1.37 450 32.0 26 5.0 100 2.6 1.4 0.23 250 7.5 5 6.0 200 3.4 2.0 0.28 180 10.0 6 9.0 400 4.85 3.0 0.55 203 15.0 9 12.0 850 7.0 4.0 0.64 169 20.0 12 18.0 1,600 9.8 6.0 0.92 203 30.0 18 26.5 3,300 14.0 8.0 1.4 213 40.0 26 Sensitive Coil Weight: MW4, MW4HP: 0.09 oz. (2.55 g) MW4S, MW4HPS: 0.12 oz. (3.40 g). Vibration Resistance: MW4 types:10 G’s, 10-500 Hz. MW4HP types: 30 G’s, 10-3,000 Hz Shock Resistance: MW4 types:30 G’s, 6 ± 1 ms. MW4HP types: 100 G’s, 6 ± 1 ms. 4 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT (Continued) MW4 & MW4HP Models 4 GHz. Switching Insertion Loss & VSWR: NC Contacts Insertion Loss & VSWR: NO Contacts (dB) VSWR (dB) Isolation VSWR (dB) 0.0 2.0 0.0 2.0 0.05 1.9 0.05 1.9 0.10 1.8 0.10 0.15 1.7 0.15 1.7 0.20 1.6 0.20 1.6 0.25 1.5 0.25 1.5 0.30 1.4 0.30 1.4 0.35 1.3 0.35 1.3 1.2 0.40 1.1 0.45 1.0 4.0 0.50 INSERTION LOSS VSWR 0.40 0.45 0.50 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 1.8 INSERTION LOSS 1.2 VSWR 0 FREQUENCY (GHz) 0.5 1.0 1.5 2.0 0 -10 ISOLATION -20 -30 -40 1.1 2.5 3.0 3.5 1.0 4.0 -50 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 FREQUENCY (GHz) FREQUENCY (GHz) Test Conditions Test Board: 0.031” double sided copper clad, PTFE based laminate. Connections: Relay header is soldered to ground place. Relay terminals are soldered to through holes. SMA connectors are soldered to circuit traces. Temperature: Room ambient. Signal Strength: 0 dBm. Notes: 1. Unused terminals were terminated with 50 ohm impedance load. 2. All readings are typical. Header Enclosures .335 (8.51) SQ MAX .335 (8.51) SQ MAX .375 (9.53) SQ MAX .031± .003 (0.79) .035± .010 (0.98) .385 (9.78) MAX .280 (7.11) MAX .017 +.002 -.001 (0.43) DIA .370 (9.40) SQ MAX MW4 / MW4HP .200 DIA (5.08) 36°+ 3° TERMINAL P = .187±.010 (4.75±.25) A = .750 MIN (19.05) B = 1.50 MIN (38.10) Header and Terminal Finish: Gold plated .017 +.002 -.001 (0.43) DIA .370 (9.40) SQ MAX MW4S / MW4HPS Part Numbering System Wiring Diagram Typical Part Number MW4 S – 5 P Series: MW4 = 4 GHz. switching relay MW4HP = High performance 4 GHz. switching relay Coil Sensitivity: Leave Blank = Standard Coil S = Sensitive Coil Coil Designator: 5 = 5VDC 6 = 6VDC† 9 = 9VDC† 12 = 12VDC 18 = 18VDC 26 = 26.5VDC † 6 and 9 volt coil only available on high performance models. Terminal Length: A = 0.750 in (19.05 mm) B = 1.50 in (38.105 mm) – only available on high performance models P = 0.187 ± 0.010 in (4.75 ± 0.25 mm) Terminal View 5 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT (Continued) MW6 & MW6HP Models 6 GHz. Switching Electrical Characteristics Contact Ratings Contact Arrangement: 2 Form C (DPDT) Contact Load Type 1.0A @ 28VDC Resistive 100,000 200mA @ 28VDC (300mH)* Inductive 100,000 30µA @ 50mVDC Low Level 10,000,000 Contact Resistance: Before life: 100 milliohms, max (measured @ 10mA @ 6VDC.) After life: 200 milliohms, max (measured @ 1A @ 28VDC.) Operations (min.) * The inductive rating is only applicable to high performance models (MW6HP and MW6HPS). Mechanical Life Expectancy: 10 million operations Coil Voltages: 5, 12, 18 & 26.5VDC (MW6) 5, 6, 9, 12, 18 & 26.5VDC (MW6HP) Coil Power (mw max @25°C): MW6 MW6S MW6HP MW6HPS 675 565 673 563 Duty Cycle: Continuous Coil Data MW6 Models Nominal Coil Voltage (VDC) Coil Resistance In Ohms ±20% @ 25°C Pickup Voltage VDC (Max.) @ 25°C Nominal Coil Power (mw) @ 25°C Maximum Coil Voltage Coil Designator 5.0 50 3.6 500 5.8 5 12.0 390 8.4 369 16.0 12 18.0 880 13.0 368 24.0 18 26.5 1,560 17.0 450 32.0 26 Standard Coil Pick-up Voltage: MW6: Approx 70% of nominal. MW6HP: Approx 50% of nominal. Pick-up Sensitivity (mw max @25°C): MW6 MW6S MW6HP MW6HPS 180 90 123 68 Sensitive Coil 5.0 100 3.5 250 7.5 5 12.0 850 9.0 169 20.0 12 Operating Characteristics 18.0 1,600 13.5 203 30.0 18 Timing: Operate Time (ms max.) MW6 MW6S MW6HP MW6HPS 4.0 6.0 2.0 4.0 Release Time (ms max.) MW6 MW6S MW6HP MW6HPS 3.0 3.0 1.5 2.0 Bounce Time (ms max.) MW6 MW6S MW6HP MW6HPS – – 1.5 1.5 26.5 3,300 18.0 213 40.0 26 Dielectric Withstanding Voltage: Between Open Contacts, Between Adjacent Contacts and Between Contacts and Coil: MW6 types: 350Vrms, 60 Hz. MW6HP types: 500Vrms, 60 Hz. Insulation Resistance: 1,000 megohms @ 500VDC. Environmental Characteristics Temperature Range: MW6 types: -55°C to +85°C. MW6HP types: -65°C to +125°C. MW6HP (High Performance) Models Nominal Coil Res. Pickup V Coil Voltage in Ohms VDC (Max.) (VDC) ±10% @ 25°C @25°C Release V VDC (Max.) @25°C Release V VDC (Min.) @25°C Nominal Coil Power (mw) @25°C Maximum Coil Voltage Coil Designator Standard Coil 5.0 50 2.7 1.4 0.22 500 5.8 5 6.0 98 3.5 2.0 0.28 367 8.0 6 9.0 220 5.3 3.0 0.54 368 12.0 9 12.0 390 7.0 4.0 0.63 369 16.0 12 18.0 880 10.5 6.0 0.91 368 24.0 18 26.5 1,560 14.2 8.0 1.37 450 32.0 26 5.0 100 2.6 1.4 0.23 250 7.5 5 6.0 200 3.4 2.0 0.28 180 10.0 6 9.0 400 4.85 3.0 0.55 203 15.0 9 12.0 850 7.0 4.0 0.64 169 20.0 12 18.0 1,600 9.8 6.0 0.92 203 30.0 18 26.5 3,300 14.0 8.0 1.4 213 40.0 26 Sensitive Coil Weight: MW6, MW6HP: 0.09 oz. (2.55 g) MW6S, MW6HPS: 0.12 oz. (3.40 g). Vibration Resistance: MW6 types:10 G’s, 10-500 Hz. MW6HP types: 30 G’s, 10-3,000 Hz Shock Resistance: MW6 types:30 G’s, 6 ± 1 ms. MW6HP types: 100 G’s, 6 ± 1 ms. 6 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT (Continued) MW6 & MW6HP Models 6 GHz. Switching Insertion Loss & VSWR: NC Contacts Insertion Loss & VSWR: NO Contacts (dB) VSWR (dB) VSWR 0.0 2.0 0.0 2.0 0.1 1.9 0.1 1.9 1.8 0.2 0.3 1.7 0.3 0.4 1.6 0.4 1.6 0.5 1.5 0.5 1.5 0.6 1.4 0.6 1.4 0.7 1.3 0.7 1.3 1.2 0.8 1.1 0.9 INSERTION LOSS 0.2 0.8 VSWR 0.9 1.0 0 1.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 1.0 0 FREQUENCY (GHz) 1.8 INSERTION LOSS 0 -10 1.7 1.2 VSWR Isolation (dB) -20 ISOLATION -30 -40 1.1 1.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 -50 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) FREQUENCY (GHz) Test Conditions Test Board: 0.031” double sided copper clad, PTFE based laminate. Connections: Relay header is soldered to ground place. Relay terminals are soldered to through holes. SMA connectors are soldered to circuit traces. Temperature: Room ambient. Signal Strength: 0 dBm. Notes: 1. Unused terminals were terminated with 50 ohm impedance load. 2. All readings are typical. Header Enclosures .335 (8.51) SQ MAX .335 (8.51) SQ MAX .375 (9.53) SQ MAX .031± .003 (0.79) .035± .010 (0.98) .385 (9.78) MAX .280 (7.11) MAX .017 +.002 -.001 (0.43) DIA .370 (9.40) SQ MAX MW6 / MW6HP .200 DIA (5.08) 36°+ 3° TERMINAL P = .187±.010 (4.75±.25) A = .750 MIN (19.05) B = 1.50 MIN (38.10) .017 +.002 -.001 (0.43) DIA .370 (9.40) SQ MAX Header and Terminal Finish: Gold plated MW6S / MW6HPS Part Numbering System Wiring Diagram Typical Part Number MW6 S – 5 P Series: MW6 = 6 GHz. switching relay MW6HP = High performance 6 GHz. switching relay Coil Sensitivity: Leave Blank = Standard Coil S = Sensitive Coil Coil Designator: 5 = 5VDC 6 = 6VDC† 9 = 9VDC† 12 = 12VDC 18 = 18VDC 26 = 26.5VDC † 6 and 9 volt coil only available on high performance models. Terminal Length: A = 0.750 in (19.05 mm) B = 1.50 in (38.105 mm) – only available on high performance models P = 0.187 ± 0.010 in (4.75 ± 0.25 mm) Terminal View 7 Catalog 1654542 Issued 12-03 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Global Contacts Americas Argentina – Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2250 Brasil – São Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 Canada – Markham Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: (Technical Support) Phone: +905-470-4425 Fax: +905-474-5525 Colombia – Bogota Phone: +57-1-240-9396 Fax: +57-1-660-0206 Mexico – Mexico City Phone: +52-55-5-729-0425 Fax: +52-55-5-398-1430 For Latin/South American Countries not shown Phone: +57-1-240-9396 Fax: +57-1-660-0206 United States – Harrisburg, PA Phone: +717-564-0100 Fax: +717-986-7575 Product Information Center: (Technical Support) Phone: +800-522-6752 Fax: +717-986-7575 Asia/ Pacific Australia – Sydney Phone: +61-2-9840-8200 Fax: +61-2-9899-5649 Product Information Center: (Technical Support) Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 India – Bangalore Phone: +91-80-841-0200 Fax: +91-80-841-0210 Indonesia – Jakarta Phone: +6221-526-7852 Fax: +6221-526-7856 Japan – Kawasaki, Kanagawa Phone: +81-44-844-8079 Fax: +81-44-844-8733 Product Information Center: (Technical Support) Phone: +81-44-844-8013 Fax: +81-44-812-3200 Raychem Products Phone: +81-44-900-5102 Fax: +81-44-5025-5027 Korea – Seoul Phone: +82-2-3274-0535 Fax: +82-2-3274-0524/0531 Malaysia – Selangor Phone: +60-3-7053055 Fax: +60-3-7053066 New Zealand – Auckland Phone: +64-9-634-4580 Fax: +64-9-634-4586 Philippines – Makati City Phone: +632-867-8641 Fax: +632-867-8661 People’s Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Shanghai Phone: Fax: +86-21-6485-0602 +86-21-6485-0728 Shunde Phone: Fax: +86-765-775-1368 +86-765-775-2823 Singapore – Singapore Phone: +65-4820-311 Fax: +65-4821-012 Raychem Products Phone: +65-4866-151 Fax: +65-6545-514 Taiwan – Taipei Phone: +886-2-2664-9977 Fax: +886-2-2664-9900 Thailand – Bangkok Phone: +66-2-955-0500 Fax: +66-2-955-0505 Vietnam – Ho Chi Minh City Phone: +84-8-8232-546/7 Fax: +84-8-8221-443 Europe/ Middle East/Africa Austria – Vienna Phone: +43-190-560-0 Fax: +43-190-560-1333 Belgium – Kessel-Lo Phone: +32-16-352-300 Fax: +32-16-352-352 Germany – Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: (Technical Support) Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Bulgaria – Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Germany – Langen Phone: +49-6103-709-0 Fax: +49-6103-709-1223 Czech Republic – Kurim Phone: +420-5-41-162-111 Fax: +420-5-41-162-223 Germany – Speyer Phone: +49-6232-30-0 Fax: +49-6232-30-2243 Denmark – Viby J Phone: +45-70-15-52-00 Fax: +45-86-29-51-33 Germany HTS Division – Neunkirchen Phone: +49-2247-305-0 Fax: +49-2247-305-122 Egypt – Cairo Phone: +20-2-417-76-47 Fax: +20-2-419-23-34 Estonia – Tallinn Phone: +372-65-05-474 Fax: +372-65-05-470 Finland – Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250 France – Cergy-Pontoise Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: (Technical Support) Phone: +33-1-3420-8943 Fax: +33-1-3420-8623 France Tyco Electronics Export – St Ouen L’Aumone Phone: +33-1-3440-7200 Fax: +33-1-3440-7220 or +33-1-3440-7230 1654542–2.5M–KRG–FP–12-03 Printed in the U.S.A. Great Britain – Stanmore Middlesex Phone: +44-181-954-2356 Fax: +44-181-954-6234 Product Information Center: (Technical Support) Freephone GB: 0800-267-666 Phone: +44-141 810 8967…69 Fax: +44-141 810 8971 Great Britain – Dorcan, Swindon Raychem Products Phone: +44-1793-528171 Fax: +44-1793-572516 Italy – Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031-116 Lithuania – Vilnius Phone: +370-5-21-31-402 Fax: +370-5-21-31-403 Netherlands – ’s-Hertogenbosch Phone: +31-73-6246-246 Fax: +31-73-6212-365 Product Information Center: (Technical Support) Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway – Nesbru Phone: +47-66-77-88-99 Fax: +47-66-77-88-55 Poland – Warsaw Phone: +48-22-45-76-700 Fax: +48-22-45-76-720 Romania – Bucharest Phone: +40-1-311-3479+3596 Fax: +40-1-312-0574 Sweden – Upplands Väsby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 Switzerland – Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Turkey – Istanbul Phone: +90-212-281-8181…3 +90-212-282-5130/5430 Fax: +90-212-281-8184 Ukraine – Kiev Phone: +38-044-238-6908 Fax: +38-044-568-5740 Russia – Moscow Phone: +7-095-926-55-06…09 Fax: +7-095-926-55-05 Russia – St. Petersburg Phone: +7-812-325-30-83 Fax: +7-812-325-32-88 Greece – Athens Phone: +30-1-9370-396/397 Fax: +30-1-9370-655 Scotland – Dundee Madison Cable Products Phone: +44-1382-508080 Fax: +44-1382-505060 Hungary – Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Slovakia – Banská Bystrica Phone: +421-48-415-20-11/12 Fax: +421-48-415-20-13 Ireland – Dublin Phone: +353-1-820-3000 Fax: +353-1-820-9790 Slovenia – Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 Israel – Yokneam Phone: +972-4-959-0508 Fax: +972-4-959-0506 Spain – Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Product Information Center: (Technical Support): Phone: +34-93-291-0330 Fax: +34-93-200-3779 South Africa – Port Elizabeth Phone: +27-41-405-4500 Fax: +27-41-486-1314 Tyco Electronics Corporation www.tycoelectronics.com