MGS MGSD MGSDD MGST .1 00 GRID HIGH-PERFORMANCE RELAYS ■ ■ ■ MGS MGSD MGSDD MGST SENSITIVE .100 GRID HIGH-PERFORMANCE RELAY SENSITIVE .100 GRID DIODE SUPPRESSED HIGH-PERFORMANCE RELAY SENSITIVE .100 GRID DIODE SUPPRESSED/PROTECTED HIGH-PERFORMANCE RELAY SENSITIVE .100 GRID DIODE SUPPRESSED/MOSFET DRIVEN HIGH-PERFORMANCE RELAY QUALIFIED TO MIL-R-39016/41 QUALIFIED TO MIL-R-39016/42 QUALIFIED TO MIL-R-39016/43 QUALIFIED TO MIL-R-28776/7 X1 A2 B2 A2 A1 B1 A1 B3 A3 A3 X2 TERMINAL VIEW Hermetically sealed High shock & vibration ratings ■ Mounting pads ■ Excellent RF switching X2 + X1 B2 A2 B1 A1 B3 A3 TERMINAL VIEW Suppression diode Hermetically sealed High shock & vibration ratings ■ Mounting pads ■ Excellent RF switching + X1 X1 + B1 A2 B2 B3 A1 B1 A3 B3 TERMINAL VIEW FEATURES Suppression & protection diodes ■ Hermetically sealed ■ High shock & vibration ratings ■ Mounting pads ■ Excellent RF switching CONTACT LOAD 2 Form C (DPDT) ■ MOSFET driver, zener & suppression diodes ■ Hermetically sealed ■ High shock & vibration ratings ■ Mounting pads ■ Excellent RF switching TYPE 1.0 A @ 28 Vdc 250 mA @ 115 Vac, 60 Hz & 400 Hz 100 mA @ 115 Vac, 60 Hz & 400 Hz 0.2 A @ 28 Vdc 0.1 A @ 28 Vdc 30 µA @ 50 mVdc 0.1 A @ 28 Vdc CONTACT RESISTANCE OPERATIONS MIN. Resistive 100,000 Resistive (case not grounded) 100,000 Resistive 100,000 Inductive (0.32 Henry) 100,000 Lamp 100,000 Low Level 1,000,000 Intermediate Current 50,000 .335 (8.51) SQ MAX Before Life: 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life: 200 milliohms max. (measured @ 1 A @ 28 Vdc) .435 (11.05) MAX .335 (8.51) MAX .375 (9.53) MAX .375 (9.53) MAX MECHANICAL LIFE EXPECTANCY TERMINALS C .500 MIN (12.7) P .187±.010 (4.75 ±.25) (Length excludes mounting pad) 1 million operations COIL VOLTAGE 5 to 48 Vdc 565 mW max. @ 25°C G CONTACT RATINGS CONTACT ARRANGEMENT COIL POWER _ X2 B2 ■ ELECTRICAL CHARACTERISTICS Stationary: Gold/platinum/palladium/silver (gold plated) Moveable: Gold/platinum/palladium/silver (gold plated) X2 FEATURES ■ ■ ■ CONTACT MATERIAL – TERMINAL VIEW FEATURES FEATURES ■ ■ – .370 (9.40) SQ MAX .017 +.002 (0.43) DIA -.001 8 PINS .370 (9.40) MAX MGS/MGSD/MGSDD ENCLOSURE .017 +.002 (0.43) DIA -.001 9 PINS MGST ENCLOSURE MGS .375 (9.40) MAX DUTY CYCLE .031± .003 (0.79) .375 (9.40) SQ MAX .031± .003 (0.79) Continuous .035 (0.98) PICK-UP VOLTAGE .100 (2.54) Approximately 50% of nominal coil voltage .035 (0.98) .100 (2.54) .475 (11.94) MAX PICK-UP SENSITIVITY 60 mW max. @ 25°C 18 MGST GROUND PIN (OPTIONAL) .100 (2.54) MGS/MGSD/MGSDD HEADER GROUND PIN (OPTIONAL) .100 (2.54) MGST HEADER Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation OPERATING CHARACTERISTICS ENVIRONMENTAL CHARACTERISTICS SEMICONDUCTOR CHARACTERISTICS TEMPERATURE RANGE DIODE OperateTime: 4.0 ms max. Release Time: MGS: 2.0 ms max. MGSD/MGSDD: 7.5 ms max. (suppression diode, protection/suppression diodes) MGST: 7.5 ms max. (suppression/zener diodes) -65°C to +125°C 100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage CONTACT BOUNCE 75 G’s, 6 ±1 ms max. 1.5 ms max. QPL APPROVAL DIELECTRIC WITHSTANDING VOLTAGE MIL-R-39016/41 (JMGS) MIL-R-39016/42 (JMGSD) MIL-R-39016/43 (JMGSDD) MIL-R-28776/7 (JMGST) WEIGHT 0.09 oz. (2.55 gms) 0.129 oz. (3.45 gms) w/ mounting pad attached ZENER DIODE VIBRATION RESISTANCE MOSFET 30 G’s, 10 to 3,000 Hz 0.5 Vdc min. gate turn off voltage 4.3 Vdc max. gate turn on voltage SHOCK RESISTANCE Between Open Contacts: 500 Vrms 60 Hz Between Adjacent Contacts: 500 Vrms 60 Hz 20 Vdc ±3 Vdc over temperature range .014 (0.36) .014 ±.003 (0.36) Between Contacts & Coil: 500 Vrms 60 Hz .094 (2.39) DIA FULL R 2 PLS 0.47 (1.19) DIA INSULATION RESISTANCE 10,000 megohms min. @ 500 Vdc 1,000 megohms @ 500 Vdc (coil to case @ +125°C) .256 (6.50) .140– .175 DIA (3.56–4.45) W W .140– .170 (3.56–4.32) MGS/MGSD/MGSDD MOUNTING PAD MGST MOUNTING PAD COIL DATA NOM. COIL VOLTAGE (Vdc) COIL RESISTANCE IN OHMS ±10% @ 25°C (Note) COIL CIRCUIT CURRENT mA (MAX.) COIL CIRCUIT CURRENT mA (MIN.) (Note) (Note) PICKUP VOLTAGE Vdc (MAX.) @ 25°C PICKUP VOLTAGE Vdc (MAX.) @ 125°C DROP-OUT VOLTAGE Vdc (MIN.) @ 25°C DROP-OUT VOLTAGE Vdc (MIN.) @ -65°C NOM. COIL POWER (mW) @ 25°C MAX. COIL VOLTAGE COIL DESIG. MGS/MGSD 5.0 100 6.0 200 9.0 400 12.0 800 18.0 1,600 26.5 3,200 36.0 6,500 48.0 11,000 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 2.6 3.4 4.85 7.0 9.8 14.0 20.0 25.8 3.5 4.5 6.8 9.0 13.5 18.0 27.0 36.0 0.23 0.28 0.55 0.64 0.92 1.4 1.8 2.4 0.12 0.18 0.35 0.41 0.59 0.89 1.25 1.60 250 180 203 180 203 219 199 209 7.5 10.0 15.0 20.0 30.0 40.0 57.0 75.0 5 6 9 12 18 26 36 48 MGSDD 5.0 6.0 9.0 12.0 18.0 26.5 36.0 48.0 64 125 400 800 1,600 3,200 6,500 11,000 78.1 48.9 23.6 16.0 12.2 9.0 6.1 4.8 56.8 36.3 18.1 12.5 9.6 7.2 4.9 3.9 2.9 4.0 6.1 7.8 11.3 15.2 21.7 27.8 3.7 4.8 8.0 11.0 14.5 19.0 27.2 34.8 0.8 0.9 1.1 1.3 1.5 1.7 2.3 2.8 0.7 0.8 0.9 1.0 1.1 1.3 1.7 2.0 391 288 203 180 203 219 199 209 7.5 10.0 15.0 20.0 30.0 40.0 57.0 75.0 5 6 9 12 18 26 36 48 100 200 400 800 1,600 3,200 56.0 33.0 26.4 17.7 13.8 10.2 43.0 27.0 17.8 11.3 8.4 5.8 2.9 3.5 5.3 7.1 10.6 14.2 4.0 4.9 7.3 9.8 14.6 19.5 0.23 0.32 0.48 0.65 0.97 1.30 0.13 0.18 0.27 0.36 0.54 0.72 250 180 203 180 203 219 5.6 8.0 12.0 16.0 24.0 32.0 5 6 9 12 18 26 MGST 5.0 6.0 9.0 12.0 18.0 26.5 .1 00 GRID HIGH-PERFORMANCE RELAYS TIMING Note: Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25°C for 5 seconds max. SPECIFYING A PART NUMBER EXAMPLE: TYPE TERMINALS DIODES TRANSISTOR GROUND PINS COILS MOUNTING PADS MGS C D G -26 W Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation 19