MGA MGAD MGADD MGAT .1 00 GRID HIGH-PERFORMANCE RELAYS ■ ■ ■ MGA MGAD MGADD MGAT STANDARD .100 GRID HIGH-PERFORMANCE RELAY STANDARD .100 GRID DIODE SUPPRESSED HIGH-PERFORMANCE RELAY STANDARD .100 GRID DIODE SUPPRESSED/PROTECTED HIGH-PERFORMANCE RELAY STANDARD .100 GRID DIODE SUPPRESSED/MOSFET DRIVEN HIGH-PERFORMANCE RELAY QUALIFIED TO MIL-R-39016/17 QUALIFIED TO MIL-R-39016/18 QUALIFIED TO MIL-R-39016/19 QUALIFIED TO MIL-R-28776/6 X1 A2 B2 A2 A1 B1 A3 B3 X2 TERMINAL VIEW Hermetically sealed High shock & vibration ratings ■ Mounting pads ■ Excellent RF switching X2 _ X2 G X1 A1 B1 A1 B1 A2 B2 A3 B3 A3 B3 A1 B1 + X1 B2 + X1 FEATURES FEATURES FEATURES ■ Suppression & protection diodes ■ Hermetically sealed ■ High shock & vibration ratings ■ Mounting pads ■ Excellent RF switching ELECTRICAL CHARACTERISTICS + A3 B3 TERMINAL VIEW TERMINAL VIEW Suppression diode Hermetically sealed High shock & vibration ratings ■ Mounting pads ■ Excellent RF switching ■ MOSFET driver, zener & suppression diodes ■ Hermetically sealed ■ High shock & vibration ratings ■ Mounting pads ■ Excellent RF switching CONTACT RATINGS CONTACT ARRANGEMENT CONTACT LOAD 2 Form C (DPDT) Stationary: Gold/platinum/palladium/silver (gold plated) Moveable: Gold/platinum/palladium/silver (gold plated) X2 A2 ■ ■ ■ CONTACT MATERIAL – B2 TERMINAL VIEW FEATURES ■ ■ – TYPE 1.0 A @ 28 Vdc 250 mA @ 115 Vac, 60 Hz & 400 Hz 100 mA @ 115 Vac, 60 Hz & 400 Hz 0.2 A @ 28 Vdc 0.1 A @ 28 Vdc 30 µA @ 50 mVdc 0.1 A @ 28 Vdc CONTACT RESISTANCE OPERATIONS MIN. Resistive 100,000 Resistive (case not grounded) 100,000 Resistive 100,000 Inductive (0.32 Henry) 100,000 Lamp 100,000 Low Level 1,000,000 Intermediate Current 50,000 .335 (8.51) SQ MAX Before Life: 100 milliohms max. (measured @ 10 mA @ 6 Vdc) After Life: 200 milliohms max. (measured @ 1 A @ 28 Vdc) .335 (8.51) MAX .280 (7.11) MAX .435 (11.05) MAX .280 (7.11) MAX TERMINALS C .500 MIN (12.7) P .187±.010 (4.75 ±.25) (Length excludes mounting pad) MECHANICAL LIFE EXPECTANCY 1 million operations .017 +.002 (0.43) DIA -.001 8 PINS .370 (9.40) SQ MAX COIL VOLTAGE 5 to 26.5 Vdc .370 (9.40) MAX MGA/MGAD/MGADD ENCLOSURE .017 +.002 (0.43) DIA -.001 9 PINS MGAT ENCLOSURE COIL POWER 660 mW max. @ 25°C .375 (9.40) MAX DUTY CYCLE Continuous PICK-UP VOLTAGE Approximately 50% of nominal coil voltage .031± .003 (0.79) .375 (9.40) SQ MAX .031± .003 (0.79) .035 (0.98) MGA .100 (2.54) .035 (0.98) .100 (2.54) .475 (11.94) MAX PICK-UP SENSITIVITY 130 mW max. @ 25°C 16 MGAT GROUND PIN (OPTIONAL) .100 (2.54) MGA/MGAD/MGADD HEADER GROUND PIN (OPTIONAL) .100 (2.54) MGAT HEADER Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation OPERATING CHARACTERISTICS ENVIRONMENTAL CHARACTERISTICS SEMICONDUCTOR CHARACTERISTICS TEMPERATURE RANGE DIODE OperateTime: 2.0 ms max. -65°C to +125°C 100 Vdc peak inverse voltage (PIV) 1.0 Vdc max. transient voltage ReleaseTime: MGA: 1.5 ms max. MGAD/MGADD: 4.0 ms max. (suppression diode, protection/suppression diodes) MGAT: 4.0 ms max. (suppression/zener diodes) 0.09 oz. (2.55 gms) 0.129 oz. (3.45 gms) w/ mounting pad attached ZENER DIODE VIBRATION RESISTANCE MOSFET 30 G’s, 10 to 3,000 Hz 0.5 Vdc min. gate turn-off voltage 4.3 Vdc max. gate turn-on voltage CONTACT BOUNCE 75 G’s, 6 ±1 ms max. 1.5 ms max. QPL APPROVAL WEIGHT SHOCK RESISTANCE 20 Vdc ±3 Vdc over temperature range MIL-R-39016/17 (JMGA) MIL-R-39016/18 (JMGAD) MIL-R-39016/19 (JMGADD) MIL-R-28776/6 (JMGAT) DIELECTRIC WITHSTANDING VOLTAGE Between Open Contacts: 500 Vrms 60 Hz Between Adjacent Contacts: 500 Vrms 60 Hz .014 (0.36) Between Contacts & Coil: 500 Vrms 60 Hz .014 ±.003 (0.36) INSULATION RESISTANCE .094 (2.39) DIA FULL R 2 PLS 0.47 (1.19) DIA 10,000 megohms min. @ 500 Vdc 1,000 megohms @ 500 Vdc (coil to case @ +125°C) .256 (6.50) .140– .175 DIA (3.56–4.45) W W .140– .170 (3.56–4.32) MGA/MGAD/MGADD MOUNTING PAD MGAT MOUNTING PAD COIL DATA NOM. COIL VOLTAGE (Vdc) COIL RESISTANCE IN OHMS ±10% @ 25°C (Note) COIL CIRCUIT CURRENT mA (MAX.) COIL CIRCUIT CURRENT mA (MIN.) PICKUP VOLTAGE Vdc (MAX.) @ 25°C PICKUP VOLTAGE Vdc (MAX.) @ 125°C (Note) (Note) MGA/MGAD 5.0 50 6.0 98 9.0 220 12.0 390 18.0 880 26.5 1,560 n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 2.7 3.5 5.3 7.0 10.5 14.2 3.5 4.5 6.8 9.0 13.5 18.0 MGADD 5.0 6.0 9.0 12.0 18.0 26.5 39 78 220 390 880 1,560 128.2 78.3 42.9 32.8 22.1 18.5 93.2 58.3 33.0 25.6 17.5 14.8 3.2 4.0 6.3 8.0 11.5 15.2 MGAT 5.0 6.0 9.0 12.0 18.0 26.5 39 78 220 390 880 1,560 132.3 83.9 47.1 36.1 24.1 19.9 96.5 60.3 33.1 24.9 16.1 12.9 2.9 3.5 5.3 7.1 10.6 14.2 DROP-OUT VOLTAGE Vdc (MIN.) @ 25°C DROP-OUT VOLTAGE Vdc (MIN.) @ -65°C NOM. COIL POWER (mW) @ 25°C MAX. COIL VOLTAGE COIL DESIG. 0.22 0.28 0.54 0.63 0.91 1.37 0.14 0.18 0.35 0.41 0.59 0.89 500 367 368 369 368 450 5.8 8.0 12.0 16.0 24.0 32.0 5 6 9 12 18 26 4.0 5.0 7.8 10.0 14.5 19.0 0.6 0.7 0.9 1.1 1.4 1.8 0.6 0.7 0.8 0.9 1.1 1.4 641 462 368 369 368 450 5.8 8.0 12.0 16.0 24.0 32.0 5 6 9 12 18 26 3.5 4.5 6.8 9.0 13.5 18.0 0.23 0.32 0.48 0.65 0.97 1.30 0.13 0.18 0.27 0.36 0.54 0.72 641 462 368 369 368 450 5.8 8.0 12.0 16.0 24.0 32.0 5 6 9 12 18 26 .1 00 GRID HIGH-PERFORMANCE RELAYS TIMING Note: Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25°C for 5 seconds max. SPECIFYING A PART NUMBER EXAMPLE: TYPE TERMINALS DIODES TRANSISTOR GROUND PINS COILS MOUNTING PADS MGA C D G -26 W Tyco Electronics Corporation www.tycoelectronics.com 800-522-6752 (U.S.A.) or 717-564-0100 Specifications subject to change. CII and TYCO are trademarks. ©2003 by Tyco Electronics Corporation 17