TI SN65C1168PWRE4

SN65C1167
SN75C1167, SN65C1168, SN75C1168
www.ti.com
SLLS159F – MARCH 1993 – REVISED NOVEMBER 2009
DUAL DIFFERENTIAL DRIVERS AND RECEIVERS
Check for Samples: SN65C1167 SN75C1167 SN65C1168 SN75C1168
FEATURES
1
•
•
•
•
•
•
•
•
•
•
•
Meet or Exceed Standards TIA/EIA-422-B and
ITU Recommendation V.11
BiCMOS Process Technology
Low Supply-Current Requirements: 9 mA Max
Low Pulse Skew
Receiver Input Impedance . . . 17 kΩ Typ
Receiver Input Sensitivity . . . ±200 mV
Receiver Common-Mode Input Voltage Range
of −7 V to 7 V
Operate From Single 5-V Power Supply
Glitch-Free Power-Up/Power-Down Protection
Receiver 3-State Outputs Active-Low Enable
for SN65C1167 and SN75C1167 Only
Improved Replacements for the MC34050 and
MC34051
SN65C1167 . . . DB OR NS PACKAGE
SN75C1167 . . . DB, N, OR NS PACKAGE
(TOP VIEW)
1B
1A
1R
RE
2R
2A
2B
GND
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
1D
1Y
1Z
DE
2Z
2Y
2D
SN65C1168 . . . N, NS, OR PW PACKAGE
SN75C1168 . . . DB, N, NS, OR PW PACKAGE
(TOP VIEW)
1B
1A
1R
1DE
2R
2A
2B
GND
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
1D
1Y
1Z
2DE
2Z
2Y
2D
DESCRIPTION
The SN65C1167, SN75C1167, SN65C1168, and SN75C1168 dual drivers and receivers are integrated circuits
designed for balanced transmission lines. The devices meet TIA/EIA-422-B and ITU recommendation V.11.
The SN65C1167 and SN75C1167 combine dual 3-state differential line drivers and 3-state differential line
receivers, both of which operate from a single 5-V power supply. The driver and receiver have active-high and
active-low enables, respectively, which can be connected together externally to function as direction control. The
SN65C1168 and SN75C1168 drivers have individual active-high enables.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1993–2009, Texas Instruments Incorporated
SN65C1167
SN75C1167, SN65C1168, SN75C1168
SLLS159F – MARCH 1993 – REVISED NOVEMBER 2009
www.ti.com
ORDERING INFORMATION
PACKAGE (1)
TA
PDIP – N
SOP – NS
(2)
Tube
Tape and reel
0°C to 70°C
SSOP – DB
TSSOP – PW
PDIP – N
–40°C to 85°C
2
TOP-SIDE MARKING
SN75C1167N
SN75C1167N
SN75C1168N
SN75C1168N
SN75C1167NSR
75C1167
SN75C1168NSR
75C1168
SN75C1167DBR
CA1167
SN75C1168DBR
CA1168
Tube
SN75C1168PW
Tape and reel
SN75C1168PWR
Tube
SN65C1168N
SN65C1168N
SN65C1167NSR
65C1167
CA1168
SOP – NS
Tape and reel
SN65C1168NSR
65C1168
SSOP – DB
Tape and reel
SN65C1167DBR
CB1167
Tube
SN65C1168PW
Tape and reel
SN65C1168PWR
TSSOP – PW
(1)
(2)
Tape and reel
ORDERABLE PART NUMBER
CB1168
Package drawings, thermal data, and symbolization are available at www.ti.com/sc/packaging.
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
Submit Documentation Feedback
Copyright © 1993–2009, Texas Instruments Incorporated
Product Folder Link(s): SN65C1167 SN75C1167 SN65C1168 SN75C1168
SN65C1167
SN75C1167, SN65C1168, SN75C1168
www.ti.com
SLLS159F – MARCH 1993 – REVISED NOVEMBER 2009
FUNCTION TABLES
ABC
Each Driver (1)
INPUT ENABLE
D
DE
OUTPUTS
Y
Z
H
H
H
L
L
H
L
H
X
L
Z
Z
(1)
H = high level, L = low level, X =
irrelevant, Z = high impedance
Each Receiver (1)
(1)
DIFFERENTIAL INPUTS
A−B
ENABLE
RE
OUTPUT
R
VID ≥ 0.2 V
L
H
−0.2 V < VID < 0.2 V
L
?
VID ≤ −0.2 V
L
L
X
H
Z
Open
L
H
H = high level, L = low level, ? = indeterminate, X = irrelevant,
Z = high impedance (off), Open = input disconnected or connected
driver off
LOGIC DIAGRAM (POSITIVE LOGIC)
SN65C1167/SN75C1167
SN65C1168, SN75C1168
12
4
DE
1DE
14
15
4
13
1D
RE
14
15
1D
13
2
3
1
1R
10
9
11
2D
6
5
7
2R
Copyright © 1993–2009, Texas Instruments Incorporated
2
1Y
1Z
1A
3
1
1R
12
2DE
10
9
11
2D
1B
2Y
6
5
7
2R
2Z
1Y
1Z
1A
1B
2Y
2Z
2A
2B
2A
2B
Submit Documentation Feedback
Product Folder Link(s): SN65C1167 SN75C1167 SN65C1168 SN75C1168
3
SN65C1167
SN75C1167, SN65C1168, SN75C1168
SLLS159F – MARCH 1993 – REVISED NOVEMBER 2009
www.ti.com
SCHEMATIC OF INPUTS
EQUIVALENT OF DRIVER ENABLE INPUT
EQUIVALENT OF A OR B INPUT
VCC
VCC
17 kΩ
NOM
Input
1.7 kΩ
NOM
Input
288 kΩ
NOM
1.7 kΩ
NOM
VCC (A)
or
GND (B)
GND
GND
SCHEMATIC OF OUTPUTS
TYPICAL OF EACH DRIVER OUTPUT
TYPICAL OF EACH RECEIVER OUTPUT
VCC
VCC
Output
Output
GND
GND
4
Submit Documentation Feedback
Copyright © 1993–2009, Texas Instruments Incorporated
Product Folder Link(s): SN65C1167 SN75C1167 SN65C1168 SN75C1168
SN65C1167
SN75C1167, SN65C1168, SN75C1168
www.ti.com
SLLS159F – MARCH 1993 – REVISED NOVEMBER 2009
ABSOLUTE MAXIMUM RATINGS (1)
over operating free-air temperature range (unless otherwise noted)
MIN
MAX
–0.5
7
Driver
–0.5
VCC + 0.5
A or B, Receiver
–11
14
Receiver
–14
14
V
Driver
–0.5
7
V
VCC
Supply voltage range (2)
VI
Input voltage range
VID
Differential input voltage range (3)
VO
Output voltage range
IIK or IOK
Clamp current range
Driver
±20
Driver
±150
IO
Output current range
ICC
Supply current
Receiver
±25
GND current
TJ
θJA
Tstg
(1)
(2)
(3)
(4)
(5)
Operating virtual junction temperature
Package thermal impedance (4)
(5)
V
mA
mA
200
mA
mA
150
°C
82
N package
67
NS package
64
PW package
108
–65
V
−200
DB package
Storage temperature range
UNIT
150
°C/W
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltages values except differential input voltage are with respect to the network GND.
Differential input voltage is measured at the noninverting terminal with respect to the inverting terminal.
Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS
VCC
Supply voltage
(1)
MIN
NOM
MAX
4.5
5
5.5
UNIT
V
VIC
Common-mode input voltage
Receiver
±7
V
VID
Differential input voltage
Receiver
±7
V
VIH
High-level input voltage
Except A, B
VIL
Low-level input voltage
Except A, B
IOH
High-level output current
IOL
Low-level output current
TA
Operating free-air temperature
(1)
2
V
0.8
−6
Receiver
−20
Driver
Receiver
6
Driver
20
SN75C1167, SN75C1168
0
70
SN65C1167, SN65C1168
–40
85
V
mA
mA
°C
Refer to TIA/EIA-422-B for exact conditions.
Copyright © 1993–2009, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): SN65C1167 SN75C1167 SN65C1168 SN75C1168
5
SN65C1167
SN75C1167, SN65C1168, SN75C1168
SLLS159F – MARCH 1993 – REVISED NOVEMBER 2009
www.ti.com
DRIVER SECTION
Electrical Characteristics (1)
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
VIK
TEST CONDITIONS
MIN
TYP (2)
II = −18 mA
Input clamp voltage
VOH
High-level output voltage
VIH = 2 V,
VIL = 0.8
V,
VOL
Low-level output voltage
VIH = 2 V,
VIL = 0.8
V,
|VOD1|
Differential output voltage
IOH = −20 mA
IOL = 20 mA
IO = 0 mA
Differential output voltage
∆|VOD|
Change in magnitude of differential
output voltage
UNIT
−1.5
V
3.4
V
0.2
2
(1)
|VOD2|
2.4
MAX
2
0.4
V
6
V
3.1
V
±0.4
V
±3
V
±0.4
V
RL = 100 Ω, See Figure 1
VOC
Common-mode output voltage
∆|VOC|
Change in magnitude of common-mode
output voltage
IO(OFF)
Output current with power off
IOZ
High-impedance-state output current
IIH
High-level input current
VI = VCC or VIH
1
IIL
Low-level input current
VI = GND or VIL
−1
µA
IOS
Short-circuit output current (3)
VO = VCC or GND,
−150
mA
ICC
Supply current (total package) (4)
No load,
Enabled
Ci
Input capacitance
(1)
(2)
(3)
(4)
VCC = 0 V
VO = 6 V
100
VO = −0.25 V
µA
−100
VO = 2.5 V
20
µA
−20
VO = 5 V
−30
VI = VCC or GND
4
6
VI = 2.4 or 0.5 V
5
3
µA
mA
6
pF
Refer to TIA/EIA-422-B for exact conditions.
All typical values are at VCC = 5 V, and TA = 25°C.
Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second.
This parameter is measured per input, while the other inputs are at VCC or GND.
Switching Characteristics
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
tPHL
Propagation delay time, high- to low-level
output
tPLH
Propagation delay time, low- to high-level
output
tsk(p)
Pulse skew
tr
Rise time
tf
Fall time
tPZH
Output enable time to high level
tPZL
Output enable time to low level
tPHZ
Output disable time from low level
tPLZ
Output disable time from high level
(1)
6
TEST CONDITIONS
R1 = R2 = 50 Ω,
C1 = C2 = C3 = 40 pF,
See Figure 2
R3 = 500 Ω,
S1 is open,
MIN
TYP (1)
MAX
7
12
ns
7
12
ns
0.5
4
ns
UNIT
R1 = R2 = 50 Ω,
C1 = C2 = C3 = 40 pF,
SeeFigure 3
R3 = 500 Ω,
S1 is open,
5
10
ns
5
10
ns
R1 = R2 = 50 Ω,
C1 = C2 = C3 = 40 pF,
See Figure 4
R3 = 500 Ω,
S1 is closed,
10
19
ns
10
19
ns
R1 = R2 = 50 Ω,
C1 = C2 = C3 = 40 pF,
See Figure 4
R3 = 500 Ω,
S1 is closed,
7
16
ns
7
16
ns
All typical values are at VCC = 5 V, and TA = 25°C.
Submit Documentation Feedback
Copyright © 1993–2009, Texas Instruments Incorporated
Product Folder Link(s): SN65C1167 SN75C1167 SN65C1168 SN75C1168
SN65C1167
SN75C1167, SN65C1168, SN75C1168
www.ti.com
SLLS159F – MARCH 1993 – REVISED NOVEMBER 2009
RECEIVER SECTION
Electrical Characteristics
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
VIT+
Positive-going input threshold voltage, differential
input
VIT–
Negative-going input threshold voltage, differential
input
Vhys
Input hysteresis (VIT+ – VIT–)
VIK
Input clamp voltage, RE
VOH
High-level output voltage
VID = 200 mV,
IOH = −6 mA
VOL
Low-level output voltage
VID = −200 mV,
IOL = 6 mA
IOZ
High-impedance-state output
current
II
Line input current
II
Enable input current, RE
ri
Input resistance
ICC
(1)
(2)
(3)
MIN
TYP (1)
MAX UNIT
0.2
−0.2 (2)
V
60
SN75C1167
SN75C1167
II = −18 mA
Other input at 0 V
SN75C1167
3.8
4.2
V
0.3
V
±0.5
±5
µA
VI = 10 V
1.5
VI = −10 V
−2.5
No load, Enabled
±1
Other input at 0 V
V
0.1
VI = VCC or GND
VIC = −7 V to 7 V,
Supply current (total package)
mV
−1.5
VO = VCC or GND
V
4
17
mA
µA
kΩ
VI = VCC or GND
4
6
VIH = 2.4 V or 0.5 V (3)
5
9
mA
All typical values are at VCC = 5 V and TA = 25°C.
The algebraic convention, where the less positive (more negative) limit is designated as minimum, is used in this data sheet for
common-mode input voltage and threshold voltage levels only.
Refer to TIA/EIA-422-B for exact conditions.
Switching Characteristics
over operating free-air temperature range (unless otherwise noted)
PARAMETER
(1)
TEST CONDITIONS
MIN
TYP (2)
MAX
9
17
27
ns
9
17
27
ns
4
9
ns
UNIT
tPLH
Propagation delay time, low- to high-level output
tPHL
Propagation delay time, high- to low-level output
tTLH
Transition time, low- to high-level output
tTHL
Transition time, high- to low-level output
4
9
ns
tPZH
Output enable time to high level
13
22
ns
tPZL
Output enable time to low level
13
22
ns
tPHZ
Output disable time from high level
13
22
ns
tPLZ
Output disable time from low level
13
22
ns
(1)
(2)
See Figure 5
VIC = 0 V, See Figure 5
RL = 1 kW, See Figure 6
Measured per input while the other inputs are at VCC or GND
All typical values are at VCC = 5 V and TA = 25°C.
Copyright © 1993–2009, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): SN65C1167 SN75C1167 SN65C1168 SN75C1168
7
SN65C1167
SN75C1167, SN65C1168, SN75C1168
SLLS159F – MARCH 1993 – REVISED NOVEMBER 2009
www.ti.com
PARAMETER MEASUREMENT INFORMATION
RL
2
VOD2
RL
2
VOC
Figure 1. Driver Test Circuit, VOD and VOC
A.
C1, C2, and C3 include probe and jig capacitance.
B.
The input pulse is supplied by a generator having the following characteristics: PRR = 1 MHz, 50% duty cycle, tr = tf
≤ 6 ns.
3V
Input
(see Note B)
t PLH
Y
C2
Input
1.3 V
1.3 V
t PHL
VOH
R1
R3
50%
1.3 V
Y
1.5 V
C1
S1
C3
0V
t sk(p)
R2
50%
1.3 V
VOL
t sk(p)
VOH
Z
50%
1.3 V
Z
See Note A
t PHL
50%
1.3 V
VOL
t PLH
TEST CIRCUIT
VOLTAGE WAVEFORMS
Figure 2. Driver Test Circuit and Voltage Waveforms
C.
C1, C2, and C3 include probe and jig capacitance.
D.
The input pulse is supplied by a generator having the following characteristics: PRR = 1 MHz, 50% duty cycle, tr = tf
≤ 6 ns.
C2
Input
C1
R1
0V
R3
VOD
1.5 V
S1
C3
3V
Input
(see Note B)
R2
Differential
Output
90%
90%
10%
10%
tr
See Note A
TEST CIRCUIT
tf
VOLTAGE WAVEFORMS
Figure 3. Driver Test Circuit and Voltage Waveforms
8
E.
C1, C2, and C3 include probe and jig capacitance.
F.
The input pulse is supplied by a generator having the following characteristics: PRR = 1 MHz, 50% duty cycle, tr = tf
≤ 6 ns.
Submit Documentation Feedback
Copyright © 1993–2009, Texas Instruments Incorporated
Product Folder Link(s): SN65C1167 SN75C1167 SN65C1168 SN75C1168
SN65C1167
SN75C1167, SN65C1168, SN75C1168
www.ti.com
SLLS159F – MARCH 1993 – REVISED NOVEMBER 2009
PARAMETER MEASUREMENT INFORMATION (continued)
3V
Input DE
1.3 V
C2
0V
or
3V
R1
R3
C1
S1
Pulse
Generator
DE
See Note B
50 Ω
0V
t PZL
1.5 V
Output
1.5 V
VOL + 0.3 V
R2
C3
1.5 V
t PLZ
0.8 V
VOL
t PHZ
t PZH
VOH
See Note A
VOL − 0.3 V
Output
2V
1.5 V
VOLTAGE WAVEFORMS
TEST CIRCUIT
Figure 4. Driver Test Circuit and Voltage Waveforms
G.
CL includes probe and jig capacitance.
H.
The input pulse is supplied by a generator having the following characteristics: PRR = 1 MHz, 50% duty cycle, tr = tf
≤ 6 ns.
CC
S1
t TLH
Output
(see Note B)
A Input
RL
Device
Under
Test
B Input
t THL
10%
90%
50%
50%
90%
10%
t PLH
CL = 50 pF
(see Note A)
VOH
VOL
t PHL
2.5 V
0V
−2.5 V
B Input
A Input = 0 V
TEST CIRCUIT
VOLTAGE WAVEFORMS
Figure 5. Receiver Test Circuit and Voltage Waveforms
I.
CL includes probe and jig capacitance.
J.
The input pulse is supplied by a generator having the following characteristics: PRR = 1 MHz, 50% duty cycle, tr = tf
≤ 6 ns.
RE Input
VCC
1.3 V
1.3 V
0V
S1
t PLZ
0.5 V
t PZL
VCC
Output
RE Input
VID = −2.5 V
or 2.5 V
Device
Under
Test
50%
VOL
RL
t PHZ
t PZH
VOH
CL = 50 pF
(see Note A)
50%
Output
GND
0.5 V
t PZL , t PLZ Measurement: S1 to VCC
t PZH, t PHZ Measurement: S1 to GND
TEST CIRCUIT
VOLTAGE WAVEFORMS
Figure 6. Receiver Test Circuit and Voltage Waveforms
Copyright © 1993–2009, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): SN65C1167 SN75C1167 SN65C1168 SN75C1168
9
PACKAGE OPTION ADDENDUM
www.ti.com
24-Jan-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package Qty
Drawing
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
SN65C1167NSLE
OBSOLETE
SO
NS
16
TBD
Call TI
Call TI
SN65C1167NSR
ACTIVE
SO
NS
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
65C1167
SN65C1167NSRE4
ACTIVE
SO
NS
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
65C1167
SN65C1167NSRG4
ACTIVE
SO
NS
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
65C1167
SN65C1168N
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-40 to 85
SN65C1168N
SN65C1168NE4
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
-40 to 85
SN65C1168N
SN65C1168NSR
ACTIVE
SO
NS
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
65C1168
SN65C1168NSRG4
ACTIVE
SO
NS
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
65C1168
SN65C1168PW
ACTIVE
TSSOP
PW
16
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
CB1168
SN65C1168PWE4
ACTIVE
TSSOP
PW
16
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
CB1168
SN65C1168PWG4
ACTIVE
TSSOP
PW
16
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
CB1168
SN65C1168PWR
ACTIVE
TSSOP
PW
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
CB1168
SN65C1168PWRE4
ACTIVE
TSSOP
PW
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
CB1168
SN65C1168PWRG4
ACTIVE
TSSOP
PW
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
CB1168
SN75C1167DBR
ACTIVE
SSOP
DB
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
CA1167
SN75C1167DBRE4
ACTIVE
SSOP
DB
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
CA1167
SN75C1167DBRG4
ACTIVE
SSOP
DB
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
CA1167
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
24-Jan-2013
Orderable Device
Status
(1)
Package Type Package Pins Package Qty
Drawing
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
SN75C1167N
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
0 to 70
SN75C1167N
SN75C1167NE4
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
0 to 70
SN75C1167N
SN75C1167NSLE
OBSOLETE
SO
NS
16
TBD
Call TI
Call TI
0 to 70
SN75C1167NSR
ACTIVE
SO
NS
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
75C1167
SN75C1167NSRG4
ACTIVE
SO
NS
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
75C1167
SN75C1168DBR
ACTIVE
SSOP
DB
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
CA1168
SN75C1168DBRE4
ACTIVE
SSOP
DB
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
CA1168
SN75C1168DBRG4
ACTIVE
SSOP
DB
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
CA1168
SN75C1168N
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
0 to 70
SN75C1168N
SN75C1168NE4
ACTIVE
PDIP
N
16
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
0 to 70
SN75C1168N
SN75C1168NSLE
OBSOLETE
SO
NS
16
TBD
Call TI
Call TI
0 to 70
SN75C1168NSR
ACTIVE
SO
NS
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
75C1168
SN75C1168NSRE4
ACTIVE
SO
NS
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
75C1168
SN75C1168NSRG4
ACTIVE
SO
NS
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
75C1168
SN75C1168PW
ACTIVE
TSSOP
PW
16
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
CA1168
SN75C1168PWE4
ACTIVE
TSSOP
PW
16
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
CA1168
SN75C1168PWG4
ACTIVE
TSSOP
PW
16
90
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
CA1168
SN75C1168PWR
ACTIVE
TSSOP
PW
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
CA1168
SN75C1168PWRE4
ACTIVE
TSSOP
PW
16
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
CA1168
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
24-Jan-2013
Status
(1)
SN75C1168PWRG4
ACTIVE
Package Type Package Pins Package Qty
Drawing
TSSOP
PW
16
2000
Eco Plan
Lead/Ball Finish
(2)
Green (RoHS
& no Sb/Br)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
CU NIPDAU
Level-1-260C-UNLIM
(4)
0 to 70
CA1168
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
Only one of markings shown within the brackets will appear on the physical device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 3
Samples
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
SN65C1167NSR
Package Package Pins
Type Drawing
SO
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
NS
16
2000
330.0
16.4
8.2
10.5
2.5
12.0
16.0
Q1
SN65C1168NSR
SO
NS
16
2000
330.0
16.4
8.2
10.5
2.5
12.0
16.0
Q1
SN65C1168PWR
TSSOP
PW
16
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
SN75C1167DBR
SSOP
DB
16
2000
330.0
16.4
8.2
6.6
2.5
12.0
16.0
Q1
SN75C1168DBR
SSOP
DB
16
2000
330.0
16.4
8.2
6.6
2.5
12.0
16.0
Q1
SN75C1168PWR
TSSOP
PW
16
2000
330.0
12.4
6.9
5.6
1.6
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
8-Apr-2013
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
SN65C1167NSR
SO
NS
16
2000
367.0
367.0
38.0
SN65C1168NSR
SO
NS
16
2000
367.0
367.0
38.0
SN65C1168PWR
TSSOP
PW
16
2000
367.0
367.0
35.0
SN75C1167DBR
SSOP
DB
16
2000
367.0
367.0
38.0
SN75C1168DBR
SSOP
DB
16
2000
367.0
367.0
38.0
SN75C1168PWR
TSSOP
PW
16
2000
367.0
367.0
35.0
Pack Materials-Page 2
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
0,15 M
15
0,25
0,09
8,20
7,40
5,60
5,00
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
2,00 MAX
0,10
0,05 MIN
PINS **
14
16
20
24
28
30
38
A MAX
6,50
6,50
7,50
8,50
10,50
10,50
12,90
A MIN
5,90
5,90
6,90
7,90
9,90
9,90
12,30
DIM
4040065 /E 12/01
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-150
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated