MA-COM TVB200SA_04

Tyco / Electronics
SiBar™
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
Fax: 800-227-4866
PRODUCT: TVB200SA
Thyristor Surge Protectors
DOCUMENT: SCD 24304
PCN: 732781
REV LETTER: E
REV DATE: AUGUST 24, 2004
PAGE NO.: 1 OF 2
Specification Status: RELEASED
PHYSICAL DESCRIPTION
Marking:
RDBB
Date Code
Device Code
Raychem Logo
]
A
B
MIN
MAX
MIN
MAX
mm:
4.06
4.57
3.30
3.81
in*: (0.160) (0.180) (0.130) (0.150)
C
MIN
1.90
(0.075)
D**
H
J
K
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
2.41
1.96
2.11
0.051 0.152
0.15
0.30
0.76
1.27
(0.095) (0.077) (0.083) (0.002) (0.006) (0.006) (0.012) (0.030) (0.050)
P
S
REF
MIN
MAX
mm:
0.51
5.21
5.59
in*: (0.020) (0.205) (0.220)
*Rounded off approximation
** D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P
Other Physical Characteristics
Form Factor:
Lead Material:
Encapsulation Material:
Solderability:
Solder Heat Withstand:
Solvent Resistance:
Mechanical Shock:
Vibration:
SMB (Surface Mount, JEDEC DO-214AA Package)
Tin / lead finish
Epoxy, meets UL94 V-0 requirements
per MIL-STD-750, Method 2026
per MIL-STD-750, Method 2031
per MIL-STD-750, Method 1022
per MIL-STD-750, Method 2016
per MIL-STD-750, Method 2056
Tape and Reel packaging per EIA 481-1
Agency Recognition:
Precedence:
CAUTION:
UL
This specification takes precedence over documents referenced herein.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ELV Compliant
© 2004 Tyco Electronics Corporation. All rights reserved.
Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
Fax: 800-227-4866
SiBar™
PRODUCT: TVB200SA
Thyristor Surge Protectors
DEVICE RATINGS @ 25º C (Both Polarities)
Parameter
Repetitive off-State Voltage, Maximum at ID = 5 µA
Non-Repetitive Peak
Telcordia GR-1089 CORE 10x1000 µs
Impulse Current
TIA-968 lightning Type A Metallic 10/560 µs
Double exponential
TIA-968 lightning Type A Longit. 10/160 µs
Waveform
Telcordia GR-1089 Intrabuilding 2/10 µs
(Notes 1 and 2)
IEC61000-4-5 (Voc 1.2/50us) 8/20 µs
ITU-T K.20/K.21 (Voc 10/700us) 5/310 µs
TIA-968 lightning Type B (Voc 9/720us) 5/320 µs
Critical Rate of Rise of On-State Current
Powered Pulse Amplifier, C=30uF, V=600V
Maximum 2x10 µsec waveform, VOC=750V, ISC=150A peak
Symbol
VDM
IPP1
IPP2
IPP3
IPP4
IPP5
IPP6
IPP7
DEVICE THERMAL RATINGS
Storage Temperature Range
Operating Temperature Range
Blocking or conducting state
Overload Junction Temperature
Maximum; Conducting state only
Maximum Lead Temperature for Soldering Purpose; for 10 seconds
di/dt
di/dt
(VD1=50V)
(VD2=VDM)
(IT=1A)
On-State Voltage
(PW ≤ 300 µsec, Duty Cycle ≤ 2% (Note 2))
Breakover Current
Holding Current (Note 2)
Peak Onstage Surge Current
(Measured @ 60Hz, 1 cycle, 600V)
Critical Rate of Rise of Off-State Voltage
(Linear waveform, VD = 0.8 X Rated VBO, TJ= +25ºC)
Capacitance
(f=1.0 Mhz, 50VDC bias, 1 Vrms)
(f=1.0 Mhz, 2VDCbias, 1 Vrms)
Note 1. Allow cooling before test second polarity
Note 2. Measured under pulse conditions to reduce heating
VOLTAGE-CURRENT CHARACTERISTIC
Value
200
50
70
100
150
150
90
90
500
110
Units
V
A
A
A
A
A
A
A
A/µs
A/µs
TSTG
TA
-55 to 150
-40 to 125
ºC
ºC
TJ
+150
ºC
TL
+260
ºC
ELECTRICAL CHARACTERISTICS Both polarities (TJ @ 25ºC unless otherwise noted)
Characteristics
Symbol
Min
Breakover Voltage
(+25ºC)
VBO
---(dv/dt = 0.4kV/µsec, ISC=900mA, VDC = 500V (both polarities))
Breakover Voltage Temperature Coefficient
Off-State Current
DOCUMENT: SCD 24304
PCN: 732781
REV LETTER: E
REV DATE: AUGUST 24, 2004
PAGE NO.: 2 OF 2
Typ
260
Max
320
Units
V
dVBO/dTJ
ID1
ID2
VT
-------------
0.1
-------------
----2.0
5.0
4.0
%/ºC
µA
µA
V
IBO
IH
ITSM
---150
22
------------
800
-------
mA
mA
A
dv/dt
2000
----
----
V/µs
C1
C2
-------
18
35
----
pF
pF