Soldering Tips and Cartridges Soldering Tips .39" 10.0mm .02" 0.5mm .59" 15.0mm .04" 1.0mm PHT-752035 Conical Fine 0.5mm (.02̎) PHT-752057 Conical Fine 1.0mm (.04̎) for PS-800 System with PS-CA1 Coil 3.0mm PHT-754487F 45˚ 17.0mm .67" .12" 4.0mm PHT-754497F 45˚ 0.4mm .63" 16.0mm 0.5mm .02" 10.0mm .394" Conical Fine/Bent 0.4mm (.016̎) 15.0mm .59" PHT-752337 0.5mm .02" 15.0mm .59" .12" 3.0mm Conical Fine/Bent 30° 0.5mm (.02̎) PHT-755437 Knife Sharp 45° 3.0mm (.12̎) 45º PHT-752335 Conical Fine 30° 0.5mm (.02̎) Hoof 45° 4.0mm (.16̎) 17.0mm .67" .16" PHT-752327 .016" Hoof 45° Face Only 3.0mm (.12̎) 15.0mm .59" 4.5mm .18" 45º 5.0mm .20" PHT-755477 2.0mm .08" 0.5mm .02" PHT-755457 Knife Sharp 45° 4.5mm (.18̎) Knife Bevel 45° 5.0mm (.20̎) 1.0mm .04" 45º 15.0mm .59" 75 = 750 Series for most standard applications. 65 = 650 Series also available for temperature sensitive applications. To order this series, replace 75 with 65. Soldering & Rework Cartridges SOLDERING CARTRIDGES Optimised geometries for Lead Free 0.25" 6.5mm 0.04" 1.0mm 0.04" 0.24" 6.0mm 1.0mm 0.24" 0.10" 6.0mm 2.5mm 0.24" 6.0mm 0.055" 1.4mm STTC-101P 0.24" 6.0mm Conical Sharp 1mm (.04̎) 0.07" 1.8mm STTC-125P Chisel 30º 1mm (.04̎) 0.4mm STTC-136P Chisel 30º 2.5mm (.10̎) STTC-138P Chisel 35º 1.4mm (.06̎) 0.34" 8.5mm 0.016" 0.25" 6.4mm 0.07" 1.78mm for Metcal MX-500 Series STTC-137P Chisel 30º 1.8mm (.07̎) STTC-145P Conical 0.4mm (.016̎) STTC-147P Bevel 60º 1.78mm (.07̎) STTC-1173P 45° 0.20" 5.0mm 0.52" 13.2mm Knife 5.0mm (.22̎) 1 = 700 Series for most standard applications. Only 700 Series available. STANDARD SOLDERING CARTRIDGES Frequently used geometries .10" .39" 9.9mm 2.5mm .07" .39" 9.9mm 1.78mm .06" 1.5mm 21 .39" 9.9mm STTC-136* Chisel 30° 2.5mm (.10̎) STTC-137* Chisel 30° 1.78mm (.07̎) STTC-138* Chisel 30° 1.5mm (.06̎) .12" .19" 4.8mm 3.0mm .39" 9.9mm .10" 2.5mm .07" .43" 10.9mm 1.78mm STTC-113* Chisel 90° 3.0mm (.12̎) STTC-133 Chisel 90° 2.5mm (.10̎) STTC-104 Chisel 90° 1.78mm (.07̎) for Metcal MX-500 Series STANDARD SOLDERING CARTRIDGES Frequently used geometries STTC-125* .36" 9.1mm .04" Chisel 30° 1.0mm (.04̎) 1.0mm Chisel 90° 3.0mm (.12̎) STTC-141* .05" Chisel 30° 1.3mm (.05̎) 1.3mm .86" 21.8mm STTC-198 Chisel Bent 30° 1.78mm (.07̎) .39" 9.9mm .07" 1.78mm STTC-199 .47" 11.9mm 1.5mm STTC-165 .45" 11.4mm Large Chisel 5.0mm (.20̎) .20" 5.0mm STTC-117* .30" 7.6mm Extra Large Chisel 5.0mm (.20̎) .20" 5.0mm STTC-112 .17" .08" 4.3mm Conical 2.3mm (.08̎) 2.03mm .02" 0.5mm .19" .02" 4.8mm 0.5mm .04" .66" 16.7mm 1.0mm .016" 0.4mm .33" 8.4mm .18" 4.6mm STTC-116* Conical 0.5mm (.02̎) STTC-143* .60" 15.2mm .02" Conical Sharp 0.5mm (.02̎) 0.5mm STTC-183 .08" 2.0mm Conical Grooved 2.0mm (.08̎) .70" 17.8mm STTC-140* .016" Sharp Bent 30° 0.4mm (.016̎) 0.4mm .63" 16.0mm STTC-144* .02" Sharp Bent 30° 0.5mm (.02̎) 0.5mm .57" 14.5mm STTC-145 .58" 14.7mm Conical 0.4mm (.016̎) .016" 0.4mm STTC-147 60° Bevel 60° 1.78mm (.07̎) .07" 1.78mm .56" 14.2mm 1.78mm STTC-105 .46" 11.7mm .07" Bevel 30° 1.78mm (.07̎) 30° .17" 4.3mm .05" Conical Sharp 1.0mm (.04̎) Conical Sharp 0.4mm (.16̎) Conical Sharp 1.0mm (.04̎) 1.0mm STTC-107 STTC-122 STTC-131 .39" 9.9mm .04" STTC-111 Conical 0.5mm (.02̎) STTC-101 Conical Sharp 1.0mm (.04̎) 1.0mm Chisel Bent 30° 1.5mm (.06̎) .06" Conical Sharp 1.78mm (.07̎) .53" 13.5mm .04" Long Reach Chisel 60° 1.78mm (.07̎) 1.78mm STTC-102 .48" 12.2mm .07" 1.78mm STTC-142 .63" 16.0mm .07" Conical Sharp 1.78mm (.07̎) 1.78mm Long Reach Chisel 12° 3.8mm (.15̎) .15" 3.8mm STTC-132 .39" 9.9mm .07" STTC-120 .85" 21.6mm Conical Sharp 0.4mm (.16̎) 0.4mm STTC-103* .34" 8.6mm .12" 3.0mm STTC-106 .54" 13.7mm .016" Soldering and Rework Cartridges Soldering & Rework Cartridges 1.3mm 30° .04" 1.0mm 30° .36" 9.1mm STTC-115 Bevel 30° 1.3mm (.05̎) STTC-124 Bevel 30° 1.0mm (.04̎) 1 = 700 Series for most standard applications. 0 = 600 series and 5 = 500 series also available for temperature sensitive applications. 8 = 800 Series for ceramic applications, only available for *. To order these series, replace 1 with either 0, 5 or 8. 22 Soldering and Rework Cartridges Soldering & Rework Cartridges STTC-126* .016" 0.4mm .31" 7.9mm .19" 4.7mm .08" 2.03mm .21" 5.3mm Sharp Bent 30° 0.4mm (.016̎) .19" 4.8mm .02" .56" 14.2mm STTC-135 STTC-170 .02" 0.5mm Bevel 30° 1.78mm (.07̎) .39" 9.9mm 1.78mm Long Reach Bevel 60° 1.0mm (.04̎) 60° .04" .51mm 30° .07" STTC-197 Groved Semi-Rigid Coax STTC-146 1.0mm STTC-114 Bevel 45° 2.3mm (.08̎) .14" 3.6mm for Metcal MX-500 Series Heat Staking 4.8mm (.19̎) .19" 4.8mm 1 = 700 Series for most standard applications. 0 = 600 series and 5 = 500 series also available for temperature sensitive applications. 8 = 800 Series for ceramic applications, only available for *. To order these series, replace 1 with either 0, 5 or 8. MICRO FINE REWORK CARTRIDGES For reworking 0201 and 0402 or microfine components in tight spaces SMTC-1171 .03" .76mm 30° 0.65" 16.51mm 30° .045" 1.14mm .60" 15.24mm Conical Bent 30ºFine 0.51mm (.02̎) Long Reach Micro Hoof 1.14mm (.045̎) .65" 16.51mm SMTC-1175 60° SMTC-1172 .02" .51mm SMTC-1174 60° Conical Bent 30º 0.76mm (.03̎) .035" .89mm Long Reach Micro Hoof 0.89mm (.035̎) .45" 11.43mm STTC-190* .01" .25mm Conical Microfine 0.25mm (.01̎) .52" 13.2mm 1 = 700 Series for most standard applications. 0 = 600 series and 5 = 500 series also available for temperature sensitive applications. 8 = 800 Series for ceramic applications, only available for *. To order these series, replace 1 with either 0, 5 or 8. HOOF AND KNIFE CARTRIDGES For Drag Soldering .70" 17.78mm .13" 3.3mm 60° 60° 30° 60° .65" 16.51mm .12" Hoof 3.3mm (.13̎) SMTC-1167** .06" 1.52mm SMTC-1147* Mini-Hoof 1.52mm (.06̎) 3.05mm SMTC-1170** 60° .60" 15.24mm 45° .19" Long Reach Hoof 3.05mm (.12̎) SMTC-1161* Knife - Tinned Area 2.03mm (.08̎) 4.83mm .08" 2.03mm .65" 1 .08" 60° 2.03mm .60" 15.24mm SMTC-1169** Long Reach Hoof 2.03mm (.08̎) .19" 4.83mm SMTC-1173 45° .23" 5.84mm .65" Knife - Increased Tinned Area 5.84mm (.23̎) Same as above. * = Not available for 800 Series ** = Not available for 500 and 800 Series BLADE CARTRIDGES A .41" 10.4mm 23 Part No. SMTC-1110** SMTC-162 SMTC-161 SMTC-160 SMTC-163** SMTC-164** Description A Dual Heater Quad 39.37mm (1.55̎) Blade Cartridges 15.75mm (0.620̎) Long Blade Cartridges Blade Cartridges Dual Heater Blade Short Blade Same as above. ** = Not available for 500 and 800 Series 22.10mm (0.870̎) Long 10.41mm (0.410̎) Long 45.46mm (1.79̎) Long 5mm (0.20̎)