UFTC Tip Cartridges for Metcal UltraFineTM Hand-piece
NEW
UFTC-7CN01
UFTC-7CH08
UFTC-7CN02
UltraFine Tip Cartridge, Conical
0.2mm x 5mm (0.01" x 0.2")
UFTC-7CH12
UltraFine™ Tip Cartridge, Chisel
1.2mm x 5mm (0.05" x 0.2")
UltraFine Tip Cartridge, Conical
0.4mm x 5mm (0.02" x 0.2")
UltraFine™ Tip Cartridge, Chisel, Long
0.6mm x 9mm (0.024" x 0.35")
UltraFine Tip Cartridge, Conical
0.13mm x 5.1mm (0.005" x 0.2")
UltraFine™ Tip Cartridge, Chisel
0.8mm x 5.1mm (0.03" x 0.2")
™
™
UFTC-7CN04
UFTC-7CHL06
™
UFTC-7CNL04
UltraFine™ Tip Cartridge, Conical,
Long 0.4mm x 9mm (0.02" x 0.31")
9
UFTC-7CNB02
UltraFine™ Tip Cartridge, Conical, Bent
0.2mm x 5.5mm (0.01" x 0.22")
UFTC-7CNB04
UltraFine™ Tip Cartridge, Conical, Bent
0.4mm x 5.5mm (0.02" x 0.22")
UFTC-7CHL08
UltraFine™ Tip Cartridge, Chisel, Long
0.8mm x 9mm (0.03" x 0.35")
UFTC-7DRH408
UltraFine™ Tip Cartridge, Hoof, Micro
0.8mm x 5.1mm (0.03" x 0.2")
UFTC-7DRH412
UltraFine™ Tip Cartridge, Hoof, Micro
1.2mm x 5.1mm (0.048" x 0.2")
UFTC-7CH06
UltraFine™ Tip Cartridge, Chisel
0.6mm x 5.1mm (0.024" x 0.2")
7 = 700 Series for most standard applications. UFTC Tip Cartridges are only available in 700 Series
STDC Desolder Cartridges for Desoldering Hand-piece
The Metcal MX-DS1 Desoldering Hand-piece provides exceptional ability for safely desoldering through-hole components.
The high-mass STDC cartridges store a high volume of heat while maintaining a non-damaging constant temperature.
Coupled with the MX-5000 power supply, heat is rapidly replenished, dynamically responding to the load conditions.
ø A mm (")
STDC-102
Cartridge, Desolder
0.64mm (0.025")
STDC-104
Cartridge, Desolder
1.02mm (0.04")
STDC-103
STDC-105
STDC-106
STDC-107
STDC-703L
STDC-704L
STDC-705L
Cartridge, Desolder
Cartridge, Desolder
Cartridge, Desolder
Cartridge, Desolder
Cartridge, Desolder Long Reach
Cartridge, Desolder Long Reach
Cartridge, Desolder Long Reach
ø B mm (")
1.40mm (.055")
0.76mm (0.076")
1.68mm (.066")
1.27mm (0.05")
2.03mm (.080")
1.52mm (0.06")
1.78mm (.070")
2.29mm (.090")
2.41mm (0.095")
3.18mm (.125")
1.02mm (0.04")
1.79mm (.070")
0.76mm (0.03")
1.27mm (0.05")
Standard
Long Reach
0.400"
1.68mm (.066")
2.03mm (.080")
1 = 700 Series for most standard applications. 8 = 800 Series for ceramic and high thermal demand applications. 0 = 600 Series also available for temperature sensitive
applications. To order these series, replace 1 with 8 or 0.
7 = 700 Series for most standard applications. 8 = 800 Series for ceramic and high thermal demand applications. To order this series, replace 7 with 8.
Download the Surface Mount Removal Techniques using MX-5000 Soldering and Rework System technical note from
www.metcal.com
10