Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 Introduction M/A-Com Technology Solutions supplies integrated circuits, diodes, and related surface mount components in tape wound on standard 7-inch, 8-inch, 10-inch, and 13-inch diameter reels. This application note documents the reel and tape dimensions and the orientation of the components within the tape cavities for over 75 of our most popular package styles. Packages Covered in This Application Note: Package Type Comments Package Type Comments 08-mm BGA 15-mm BGA BD-1, BD-2, BD-3 Bumped Die CR-5 LCC1 LSM1 LSM2 LSM3 LSM6 MSOP-8 Also MSOP-8EP MSOP-10 ODS-4 Axial Lead ODS-54 Axial Lead ODS-120 Ceramic ODS-139 Axial Lead ODS-146 Axial Lead ODS-186 Ceramic ODS-401 Axial Lead ODS-402 Axial Lead ODS-1056 Ceramic ODS-1072 MELF ODS-1079 MELF ODS-1091 MELF ODS-1294 Surmount ODS-1295 Surmount ODS-1306 Surmount PDFN-6, 1.2 x 1.5 mm (0.5 mm pitch) PDFN-6, 1.5 x 1.2 mm (0.4 mm pitch) PDFN-8, 2mm (MO-229,VCCD-3) PQFN-12, 3mm (MO-220, VEED-1) PQFN-16, 3mm (MO-220, VEED-4, VEED-6) PQFN-16, 4mm (MO-220, VGGC) PQFN-20, 4mm (MO-220, VGGD-1) PQFN-24, 4mm (MO-220, VGGD-8) PQFN-20, 5mm (MO-220, VHHC) PQFN-28, 5mm (MO-220, VHHD-1) PQFN-32, 5mm (MO-220, VHHD-4, VHHD-5) PQFN-32, 6x4mm PQFN-32, 6x5mm PQFN-36, 7x4mm PQFN-37, 7x6mm QSOP-16 Also QSOP-16EP QSOP-24 QSOP-28 R-1, R-4, R-5, R-15 SC-70, SOT-323, SOT-353, SOT-363 SC-79 SM-1 SM-2 SM-3 SM-4 SM-7-1 SM-20 SM-22 SM-23 SM-24 SM-26 SM-28 SM-41 SM-44 SM-46 SM-52 SM-55 SM-68 Same as SM-44 SM-69 Same as SM-1 SM-74 Same as SM-2 SM-87 Same as SM-1 SM-89 Same as SM-1 SM-106 Same as SM-2 SM-108 Same as SM-2 SM-134 Same as SM-1 SOD-323 SOIC-8 SOIC-14 SOIC-16 SOIC-24, SO-24 SOT-23 (3L) SOT-25 (5L) Same as SOT-23 (5L) SOT-26 (6L) Same as SOT-23 (6L) SOT-89 SOT-143 (4L) SOW-16 Also SOIC-16 Wide Body SSOP-8 SSOP-20 SSOP-24 SSOP-28 STDFN-8, 2mm STQFN-12, 2mm STQFN-14, 2 x 2.5mm TSSOP-16 Also TSSOP-16EP X1DFN-6, 1mm M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. 1 Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 Reel Dimensions 8-mm BGA Reel Size: 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 7.000 ± 0.079 178.0 ± 2.0 Thickness W2 0.874 Max. 22.2 Max. 0.882 Max. 22.4 Max. Space Between Flanges W1 0.661 ±0.059, -0.0 16.8 ±1.5, -0.0 0.65 ± 0.059, -0.0 16.4 ±1.5, -0.0 Outer Diameter N 4.016 Min. 102.0 Min. 2.36 Min. 60.0 Min. Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.059 Min. 1.5 Min. 0.079 Min. 2.0 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. 0.795 Min. 20.2 Min. Flange Hub 15-mm BGA Reel Size: Flange 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 7.000 ± 0.079 178.0 ± 2.0 Thickness W2 1.189 30.2 1.197 30.4 Max. Space Between Flanges W1 0.976 ±.024, -.016 24.8 ±0.6, -0.4 0.961 ± 0.079, -0.0 24.4 ± 2.0, -0.0 Outer Diameter N 4.016 102 2.36 ± 0.039 60 ± 1.0 Spindle Hole Diameter C 0.512 ±, -0.008 13 ±0.5, -0.2 0.512 ± 0.079 13 ± 2.0 Key Slit Width B 0.079 ± 0.020 2 ± 0.5 0.08 Min. 2 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. 0.795 Min. 20.2 Min. Hub 2 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 BD-1, BD-2, BD-3 Reel Size: Flange 7-inch Reel Item Symbol Size (inch) Size (mm) Diameter A 7.000 ± 0.079 178.0 ± 2.0 Thickness W2 0.567 Max. 14.4 Max. Space Between Flanges W1 0.331 ± 0.059, -0.0 8.4 ± 1.5, -0.0 Outer Diameter N 2.16 ± 0.02 55.0 ± 0.5 Spindle Hole Diameter C 0.512 ± .020/-.008 13.0 ± 0.5/-0.2 Key Slit Width B 0.059 Min. 1.5 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. Hub CR-5 Reel Size: Flange 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 7.000 ± 0.079 178.0 ± 2.0 Thickness W2 10.189 Max. 30.2 Max. 1.197 Max. 30.4 Max. Space Between Flanges W1 0.976 ± 0.059, -0.0 24.8 ± 1.5, -0.0 0.961 ± 0.059, -0.0 24.4 ± 1.5, -0.0 Outer Diameter N 4.02 Min. 102.0 Min. 2.36 Min. 60.0 Min Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.079 Min. 2 Min. 0.079 Min. 2 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. 0.795 Min. 20.2 Min. Hub LCC1 Reel Size: Flange 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 7.002 ± 0.079 178.0 ± 2.0 Thickness W2 1.189 30.2 1.197 Max. 30.4 Max. Space Between Flanges W1 0.976 ±.024, -.016 24.8 ±0.6, -0.4 0.961 ±0.078, -0.0 22.4 ±2.0, -0.0 Outer Diameter N 4.02 Min. 102.0 Min. 2.36 Min. 60.0 Min. Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.079 Min. 2 Min. 0.079 Min. 2 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. 0.795 Min. 20.2 Min. Hub 3 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 LSM1, LSM2, LSM3, LSM6 Reel Size: 13-inch Reel Item Symbol Size (inch) Size (mm) Diameter A 13.0 ± 0.079 330.0 ± 2.0 Thickness W2 1.197 Max. 30.4 Max. Space Between Flanges W1 0.961 ± 0.079, -0.0 24.4 ± 2.0, -0.0 Outer Diameter N 4.0 Min. 101.6 Min. Spindle Hole Diameter C 0.512 ± 0.020 13.0 ± 0.5 Key Slit Width B 0.059 Min. 1.5 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. Flange Hub MSOP-8, MSOP-8EP, MSOP-10, SOIC-8 (SO-8) 13-inch Reel Reel Size: Flange 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 7.002 ± 0.079 178.0 ± 2.0 Thickness W2 0.717 Max. 18.2 Max 0.724 Max. 18.4 Max. Space Between Flanges W1 0.504±0.080, -0.0 12.8 ±2.0, -0.0 0.488 ±0.080, -0.0 12.4 ±2.0, -0.0 Outer Diameter N 2.48 Min. 102.0 Min. 21 Min. 60.0 Min. Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.079 Min. 2 Min. 0.079 Min. 2 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. 0.795 Min. 20.2 Min. Hub ODS-4, ODS-54, ODS-139, ODS-146 Reel Size: Flange 10-inch Reel 8-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 10.00 ± 0.062 254.00 ± 1.57 8.00 ± 0.062 203.20 ± 1.57 Thickness W2 3.25 Max. 82.55 Max. 3.25 Max. 82.55 Max. Space Between Flanges W1 2.75 ± 0.062 69.85 ± 1.57 2.75 ± 0.062 69.85 ± 1.57 Outer Diameter N 3.25 ± 0.062 82.55 ± 1.57 3.25 ± 0.062 82.55 ± 1.57 Spindle Hole Diameter C 0.625 ± 0.062 15.88 ± 1.57 0.625 ± 0.062 15.88 ± 1.57 Key Slit Width B N/A N/A N/A N/A Key Slit Diameter D 0.312 ± 0.062 7.92 ± 1.57 0.312 ± 0.062 7.92 ± 1.57 Hub 4 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 ODS-120 Reel Size: Flange Hub 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.00 ± 0.079 330.0 ± 2.0 7.01 ± 0.079 178 ± 2.0 Thickness W2 0.57 Max. 14.4 Max. 0.57 Max. 14.4 Max. Space Between Flanges W1 0.33 ± .059,-0.0 8.4 ± 1.5, -0.0 0.33 ±.059,-0.0 8.4 ± 1.5, -0.0 Outer Diameter N 2.48 Min. 63 Min. 2.17 ± 0.020 55.0 ± 0.50 Spindle Hole Diameter C 0.512 ± 0.008 13.00 ± 0.20 0.512 ± 0.008 13.00 ± 0.20 Key Slit Width B 0.079 ± 0.020 2.0 ± 0.5 0.079 ± 0.020 2.0 ± 0.5 Key Slit Diameter D 0.795 ± 0.5, -0.0 20.2 ± 0.5, -0.0 0.795 ± .020, -0.0 20.2 ± 0.5, -0.0 ODS-186 Reel Size: Flange Hub 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 7.000 ± 0.079 178.0 ± 2.0 Thickness W2 0.87 Max. 22.2 Max. 0.882 Max. 22.4 Max. Space Between Flanges W1 0.66 ± 0.080, -0.0 16.8 ± 2.0, -0.0 0.65 ± 0.080, -0.0 16.4 ± 2.0, -0.0 Outer Diameter N 4.02 Min. 102.0 Min. 2.36 Min. 60.0 Min. Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.079 Min. 2 Min. 0.079 Min. 2 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. 0.795 Min. 20.2 Min. ODS-401, ODS-402 Reel Size: Flange Hub 10-inch Reel 8-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 10.00 ± 0.062 254.00 ± 1.57 8.00 ± 0.062 203.20 ± 1.57 Thickness W2 3.25 Max. 82.55 Max. 3.25 Max. 82.55 Max. Space Between Flanges W1 2.75 ± 0.062 69.85 ± 1.57 2.75 ± 0.062 69.85 ± 1.57 Outer Diameter N 3.25 ± 0.062 82.55 ± 1.57 3.25 ± 0.062 82.55 ± 1.57 Spindle Hole Diameter C 0.625 ± 0.062 15.88 ± 1.57 0.625 ± 0.062 15.88 ± 1.57 Key Slit Width B N/A N/A N/A N/A Key Slit Diameter D 0.312 ± 0.062 7.92 ± 1.57 0.312 ± 0.062 7.92 ± 1.57 5 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 ODS-1056 Reel Size: Flange Hub 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 7.000 ± 0.079 178.0 ± 2.0 Thickness W2 0.567 Max. 14.4 Max. 0.567 Max. 14.4 Max. Space Between Flanges W1 0.331 ± 0.059, -0.0 8.4 ± 1.5, -0.0 0.331 ± 0.059, -0.0 8.4 ± 1.5, -0.0 Outer Diameter N 2.48 min. 63.0 min. 2.17 ± 0.02, -0.0 55.0 ± 0.50, -0.0 Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.059 Min. 1.5 Min. 0.059 Min. 1.5 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. 0.795 Min. 20.2 Min. ODS-1072, ODS-1079, ODS-1091 Reel Size: Flange Hub 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.0 ± 0.02 330.2 ± 0.5 7.0 ± 0.02 177.8 ± 0.5 Thickness W2 0.724 Max. 18.4 Max. 0.724 Max. 18.4 Max. Space Between Flanges W1 0.472 ± .08, -0.0 12.0 ± 2.0, -0.0 0.472 ± .08, -0.0 12.4 ± 2.0, -0.0 Outer Diameter N 3.9 ± 0.008 100.0 ± 0.2 3.9 ± 0.008 55.0 ± 0.50 Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.079 ± 0.02 2.0 ± 0.5 0.079 ± 0.02 2.0 ± 0.5 Key Slit Diameter D 0.795 ± 0.02,-0.0 20.2 ± 0.5,-0.0 0.795 ± 0.02,-0.0 20.2 ± 0.5 ,-0.0 ODS-1294, ODS-1295, ODS-1306 Reel Size: Flange Hub 7-inch Reel Item Symbol Size (inch) Size (mm) Diameter A 7.0 ± 0.02 178 ± 0.5 Thickness W2 0.57 Max. 14.4 Max. Space Between Flanges W1 0.33 ±.059, -0.0 8.4 ± 1.5, -0.0 Outer Diameter N 2.17 ± 0.020 55.0 ± 0.50 Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.059 min. 1.5 min. Key Slit Diameter D 0.795 min. 20.2 min. 6 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 PDFN-6, 1.2 x 1.5 mm (0.5 mm Lead Pitch) & 1.5 x 1.2 mm (0.4 mm Lead Pitch) Reel Size: Flange 7-inch Reel Item Symbol Size (inch) Size (mm) Diameter A 7.000 ± 0.079 178.0 ± 2.0 Thickness W2 0.567 Max. 14.4 Max. Space Between Flanges W1 0.331 ± 0.059, -0.0 8.4 ± 1.5, -0.0 Outer Diameter N 2.16 ± 0.02 55.0 ± 0.5 Spindle Hole Diameter C 0.512 ± .020/-.008 13.0 ± 0.5/-0.2 Key Slit Width B 0.059 Min. 1.5 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. Hub PDFN-8, 2 mm (MO-229, VCCD-3) Reel Size: Flange 13-inch Reel Item Symbol Size (inch) Size (mm) Diameter A 13 +.012/-.157 330 +0.3/-4.0 Thickness W2 0.724 Max 18.4 Max. Space Between Flanges W1 0.488 +0.079/-0.0 12.4 +2.0/-0.0 Outer Diameter N 3.858 Min. 98 Min. Spindle Hole Diameter C 0.512 ± .008 13.0 ± 0.2 Key Slit Width B 0.087 ± .008 2.2 ± 0.2 Key Slit Diameter D 0.835 ± .008 21.2 ± 0.2 Hub PQFN-12, 3 mm (MO-220, VEED-1), PQFN-16, 3 mm (MO-220, VEED-4,VEED-6), PQFN-16, 4 mm (MO-220, VGGC), PQFN-20, 4 mm, PQFN-24, 4 MM (MO-220, VGGD-1), PQFN-20, 5 mm (MO-220, VHHC), PQFN-28, 5 mm (MO-220, VHHD-1), PQFN-32, 5mm (MO-220, VHHD-4,VHHD-5) Reel Size: Flange 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 7.000 ± 0.079 178.0 ± 2.0 Thickness W2 0.717 Max. 18.2 Max. 0.724 Max. 18.4 Max. Space Between Flanges W1 0.504 ± 0.059, -0.0 12.8 ± 1.5, -0.0 0.472 ± 0.059, -0.0 12.4 ± 1.5, -0.0 Outer Diameter N 4.016 Min. 102.0 Min. 2.36 Min. 60.0 Min. Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.079 Min. 2 Min. 0.079 Min. 2 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. 0.795 Min. 20.2 Min. Hub 7 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 QSOP-16, QSOP-16EP, QSOP-24, QSOP-28 Reel Size: Flange Hub 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 7.000 ± 0.079 178.0 ± 2.0 Thickness W2 0.560 Max. 14.2 Max. 0.567 Max. 14.4 Max. Space Between Flanges W1 0.346 ± 0.059, -0.0 8.8 ± 1.5, -0.0 0.331 ± 0.059, -0.0 8.4 ± 1.5, -0.0 Outer Diameter N 2.48 Min. 63.0 Min. 2.16 Min. 55.0 Min. Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.059 Min. 1.5 Min. 0.059 Min. 1.5 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. 0.795 Min. 20.2 Min. R-1, R-4, R-5, R-15, SM-1, SM-2, SM-3, SM-4, SM-7-1, SM-20, SM-22, SM-23, SM-24, SM-26, SM-28, SM-41, SM-44, SM-46, SM-52, SM-55, SM-68, SM-69, SM-74, SM-87, SM-89, SM-106, SM-108, SM-134 Reel Size: Item Symbol Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 Outer Diameter N 2.36 Min. 60.0 Min Spindle Hole Diameter C 0.512 ± 0.020 13.0 ± 0.2 Key Slit Width B 0.059 Min. 1.5 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. Flange Hub 13-inch Reel SC-70, SOT-323 (3-lead), SOT-353 (5-lead), and SOT-363 (6-lead) Reel Size: Flange Hub 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 7.000 ± 0.079 178.0 ± 2.0 Thickness W2 0.56 Max. 14.2 Max. 0.57 Max. 14.4 Max. Space Between Flanges W1 0.35 ± 0.02 8.8 ± 0.6, - 0.4 0.33 ± 0.07, - 0.00 8.4 ± 1.5, - 0.0 Outer Diameter N 4.02 Min. 102.0 Min. 2.36 Min. 60.0 Min. Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.079 ± 0.02 2.0 ± 0.5 0.079 ± 0.02. 2.0 ± 0.5. Key Slit Diameter D 0.795 Min. 20.2 Min. 0.795 Min. 20.2 Min. 8 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 SC-79, SOD-323 Reel Size: Flange Hub 7-inch Reel Item Symbol Size (inch) Size (mm) Diameter A 7.000 ± 0.079 178.0 ± 2.0 Thickness W2 0.567 Max. 14.4 Max. Space Between Flanges W1 0.374 ± .039 9.5 ± 1.00 Outer Diameter N 2.36 Min. 60.0 Min. Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.079 Min. 2 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. SOT-23, SOT-25, SOT-26, SOT-89, SOT-143 Reel Size: Flange 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 7.002 ± 0.079 178.0 ± 2.0 Thickness W2 0.560 Max. 14.2 Max. 0.567 Max. 14.4 Max. Space Between Flanges W1 0.346 ± 0.059, -0.0 8.8 ± 1.5, -0.0 0.331 ± 0.059, -0.0 8.4 ± 1.5, -0.0 Outer Diameter N 4.016 Min. 102.0 Min. 2.36 Min. 60.0 Min. Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.079 Min. 2 Min. 0.079 Min. 2 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. 0.795 Min. 20.2 Min. Hub SOIC-14 (SO-14), SOIC-16 (SO-16 & SOW-16), SSOP-8, SSOP-20, SSOP-24, SSOP-28, TSSOP-16, TSSOP-16EP Reel Size: Flange 13-inch Reel 7-inch Reel Item Symbol Size (inch) Size (mm) Size (inch) Size (mm) Diameter A 13.000 ± 0.079 330.0 ± 2.0 7.002 ± 0.079 178.0 ± 2.0 Thickness W2 0.874 Max. 22.2 Max 0.882 Max. 22.4 Max. Space Between Flanges W1 0.661 ± 0.080, -0.0 16.8 ± 2.0, -0.0 0.646 ± 0.080, -0.0 16.4 ± 2.0, -0.0 Outer Diameter N 4.016 Min. 102.0 Min. 2.36 Min. 60.0 Min. Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.079 Min. 2 Min. 0.079 Min. 2 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. 0.795 Min. 20.2 Min. Hub 9 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 SOIC-24 (SO-24, SOW-24) Reel Size: Flange 13-inch Reel Item Symbol Size (inch) Size (mm) Diameter A 14.173 Max. 360.0 Max. Thickness W2 1.189 Max. 30.2 Max. Space Between Flanges W1 0.976 ±0.078, -0.0 22.8 ±2.0, -0.0 Outer Diameter N 4.016 Min. 102.0 Min. Spindle Hole Diameter C 0.512 ± 0.008 13.0 ± 0.2 Key Slit Width B 0.079 Min. 2 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. Hub STDFN-8, 2 mm, STQFN-12, 2 mm, STQFN-14, 2x2.5 mm, X1DFN-6, 1 mm Reel Size: Flange 7-inch Reel Item Symbol Size (inch) Size (mm) Diameter A 7 +0.098/-0.079 178 +2.5/-2.0 Thickness W2 0.567 Max. 14.4 Max. Space Between Flanges W1 0.331 +0.059/-0.0 8.4 +1.5/-0.0 Outer Diameter N 2.126 Min. 54 Min. Spindle Hole Diameter C .512 +0.020/-0.0079 13.0 +0.5/-0.2 Key Slit Width B 0.059 Min. 1.5 Min. Key Slit Diameter D 0.795 Min. 20.2 Min. Hub 10 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 Tape Dimensions 8, 12, 16, and 24 mm Tape Only See Note 1 R 0.3 MAX P0 D0 T Top cover tape P2 E1 A0 F W K0 B0 c P1 T1 D1 R 0.5 TYP Notes User Direction of Feed 1. 10 sprocket hole cumulative tolerance + 0.2 2. Dimensions in millimeters (mm). 3. Not to exact scale. 4. Camber not to exceed 1 mm in 100 mm. 5. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. 6. Metric dimensions will govern. Fixed Dimensions Tape Dimensions Description Symbol Size (inches) Size (mm) Diameter D0 0.059 ± 0.004, -0.000 1.5 ± 0.1 Pitch P0 1.57 ± 0.004 4.0 ± 0.1 Position E1 0.069 ± 0.004 1.75 ± 0.10 Thickness T 0.010 ± 0.004 0.25 ± 0.10 Thickness T1 0.0024 ± 0.0008 0.06 ± 0.02 Perforation Cover Tape 11 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 8-mm BGA Tape Dimensions Cavity Distance Between Centerlines Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) A0 B0 K0 P1 0.327 ± 0.004 0.327 ± 0.004 0.106 ± 0.004 0.472 ± 0.004 8.3 ± 0.10 8.3 ± 0.10 2.7 ± 0.10 12 ± 0.10 P2 0.079 ± 0.004 2 ± 0.10 F 0.295 ± 0.004 7.5 ± 0.10 Cover Tape Width C 0.523 ± 0.004 13.3 ± 0.10 Carrier Tape Width W 0.630 ± .012 16 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width A0 B0 K0 P1 0.602 ± 0.004 0.602 ± 0.004 0.569 ± 0.004 0.787 ± 0.004 15.3 ± 0.10 15.3 ± 0.10 3.8 ± 0.10 20 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.453 ± 0.004 11.5 ± 0.10 C 0.827 ± 0.004 21 ± 0.10 Width W 0.945 ± 0.012 24 ± 0.30 Description Symbol Size (inches) Size (mm) Length A0 0.032 ± 0.002 0.82 ± 0.05 15-mm BGA Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape BD-1 Tape Dimensions Width B0 0.032 ± 0.002 0.82 ± 0.05 Cavity Depth K0 0.016 ± 0.002 0.395 ± 0.05 Pitch P1 0.157 ± 0.004 4.0 ± 0.10 D1 0.014 ± 0.002 0.35 ± 0.05 Distance Between Centerlines Pocket Hole Diameter Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width P2 0.079 ± 0.002 2.0 ± 0.05 F 0.138 ± 0.002 3.5 ± 0.05 C 0.209 ± 0.004 5.3 ± 0.10 Width W 0.315 ± 0.004 8.0 ± 0.10 Description Symbol Size (inches) Size (mm) Length A0 0.043 ± 0.002 1.1 ± 0.05 Width B0 0.049 ± 0.002 1.25 ± 0.05 Depth K0 0.012 ± 0.001 0.298 ± 0.028 Pitch P1 0.157 ± 0.004 4.0 ± 0.10 Pocket Hole Diameter Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width D1 0.020 ± 0.002 0.5 ± 0.05 P2 0.079 ± 0.002 2.0 ± 0.05 F 0.138 ± 0.002 3.5 ± 0.05 C 0.209 ± 0.004 5.3 ± 0.10 Width W 0.315 +.012/-0.004 8.0 + 0.30/-0.10 Cover Tape Carrier Tape BD-2 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape 12 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 BD-3 Tape Dimensions Description Symbol Size (inches) Size (mm) Length A0 0.023 ± 0.002 0.58 ± 0.05 Width B0 0.028 ± 0.002 0.7 ± 0.05 Depth K0 0.014 ± 0.002 0.36 ± 0.05 Pitch P1 0.157 ± 0.004 4.0 ± 0.10 Pocket Hole Diameter Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width D1 N/A N/A P2 0.079 ± 0.002 2.0 ± 0.05 F 0.138 ± 0.002 3.5 ± 0.05 C 0.209 ± 0.004 5.3 ± 0.10 Width W 0.315 ± 0.004 8.0 ± 0.10 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width Width A0 B0 K0 P1 0.355 ± 0.004 0.390 ± 0.004 0.080 ± 0.004 0.472 ± 0.004 9.02 ± 0.10 9.91 ± 0.10 2.03 ± 0.10 12.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.453 ± 0.004 11.5 ± 0.10 C W 0.827 ± 0.004 0.945 ± 0.012 21.0 ± 0.10 24.0 ± 0.30 Tape Dimensions Description Symbol Size (inches) Size (mm) Cavity Length Width Depth Pitch A0 B0 K0 P1 0.412 0.439 0.133 0.630 10.47 11.15 3.38 16.00 Cavity to Perforation (length direction) P2 0.079 ± 0.004 2.00 ± 0.10 Cavity to Perforation (width direction) F 0.453 11.50 Width W 0.945 24.00 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width A0 B0 K0 P1 0.512 0.512 0.185 0.630 13.00 13.00 4.70 16.00 P2 0.079 ± 0.004 2.00 ± 0.10 F 0.453 11.50 W 0.945 24.00 Cavity Distance Between Centerlines Cover Tape Carrier Tape CR-5 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape LCC1 Distance Between Centerlines Carrier Tape LSM1 Tape Dimensions Cavity Distance Between Centerlines Carrier Tape 13 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 LSM2 Tape Dimensions Cavity Distance Between Centerlines Carrier Tape Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width A0 B0 K0 P1 0.397 0.602 0.155 0.630 10.08 15.29 3.94 16.00 P2 0.079 ± 0.004 2.00 ± 0.10 F 0.453 11.50 W 0.945 24.00 Description Symbol Size (inches) Size (mm) Length A0 0.432 10.97 Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width B0 K0 P1 0.497 0.187 0.630 12.62 4.75 16.00 P2 0.079 ± 0.004 2.00 ± 0.10 F 0.453 11.50 W 0.945 24.00 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width A0 B0 K0 P1 0.807 0.59 0.16 0.944 20.50 15.00 4.1 24.00 P2 0.079 ± 0.004 2.00 ± 0.10 F 0.453 11.50 W 0.945 24.00 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) A0 B0 K0 P1 0.209 ± 0.004 0.134 ± 0.004 0.055 ± 0.004 0.315 ± 0.004 5.3 ± 0.10 3.4 ± 0.10 1.4 ± 0.10 8.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.217 ± 0.004 5.5 ± 0.10 LSM3 Tape Dimensions Cavity Distance Between Centerlines Carrier Tape LSM6 Tape Dimensions Cavity Distance Between Centerlines Carrier Tape MSOP-8, MSOP-8EP, MSOP-10 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Width C 0.362 ± 0.004 9.2 ± 0.10 Carrier Tape Width W 0.472 ± .012 12 ± 0.30 14 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 ODS-4 Description Symbol Size (inches) Size (mm) Inside Tape Spacing B0 2.062 ± .059 52.4 ± 1.5 Component Pitch P1 0.200 ± 0.020 5.0 ± 0.5 Width W 0.250 ± .020 6.35 ± 0.5 Description Symbol Size (inches) Size (mm) Inside Tape Spacing B0 2.062 ± .059 52.4 ± 1.5 Component Pitch P1 0.200 ± 0.020 5.0 ± 0.5 Width W 0.250 ± .020 6.35 ± 0.5 Tape Dimensions Description Symbol Size (inches) Size (mm) Cavity Length Width Depth Pitch A0 B0 K0 P1 0.056 - 0.070 0.051 - 0.060 0.056 - 0.070 0.157 ± 0.004 1.42 - 1.79 1.29 - 1.52 1.42 - 0.070 4.0 ± 0.1 Cavity to Perforation (length direction) P2 0.079 ± 0.002 2.0 ± 0.05 Cavity to Perforation (width direction) F 0.138 ± 0.002 3.50 ± 0.05 Tape Dimensions Cavity Carrier Tape ODS-54 Tape Dimensions Cavity Carrier Tape ODS-120 Distance Between Centerlines Cover Tape Carrier Tape Width C 0.213 ± 0.004 5.4 ± 0.1 Width W 0.315 ± .012, -0.00 8.0 ± 0.3, -0.0 Description Symbol Size (inches) Size (mm) Inside Tape Spacing B0 2.062 ± 0.059 52.4 ± 1.5 Component Pitch P1 0.200 ± 0.020 5.0 ± 0.5 Width W 0.250 ± 0.020 6.35 ± 0.5 Description Symbol Size (inches) Size (mm) Inside Tape Spacing B0 2.062 ± 0.059 52.4 ± 1.5 Component Pitch P1 0.200 ± 0.020 5.0 ± 0.5 Width W 0.250 ± 0.020 6.35 ± 0.5 ODS-139 Tape Dimensions Cavity Carrier Tape ODS-146 Tape Dimensions Cavity Carrier Tape 15 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 ODS-186 Tape Dimensions Description Symbol Size (inches) Size (mm) Cavity Length Width Depth Pitch A0 B0 K0 P1 0.367 ± 0.004 0.106 ± 0.004 0.054 ± 0.004 0.472 ± 0.004 9.32 ± 0.1 2.7 ± 0.1 1.37 ± 0.1 12.0 ± 0.1 Cavity to Perforation (length direction) P2 0.079 ± 0.004 2.0 ± 0.1 Cavity to Perforation (width direction) F 0.295 ± 0.004 7.50 ± 0.1 Width C 0.523 ± 0.004 13.3 ± 0.1 Width W 0.630 ± 0.012 16.0 ± 0.1 Distance Between Centerlines Cover Tape Carrier Tape ODS-401 Tape Dimensions Cavity Carrier Tape Description Symbol Size (inches) Size (mm) Inside Tape Spacing B0 2.062 ± 0.059 52.4 ± 1.5 Component Pitch P1 0.200 ± 0.020 5.0 ± 0.5 Width W 0.250 ± 0.020 6.35 ± 0.5 Description Symbol Size (inches) Size (mm) Inside Tape Spacing B0 2.062 ± 0.059 52.4 ± 1.5 Component Pitch P1 0.200 ± 0.020 5.0 ± 0.5 Width W 0.250 ± 0.020 6.35 ± 0.5 Description Symbol Size (inches) Size (mm) Length A0 0.082 ± 0.004 2.0 ± 0.1 ODS-402 Tape Dimensions Cavity Carrier Tape ODS-1056 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape Width B0 0.081 ± 0.004 2.0 ± 0.1 Depth K0 0.047 ± 0.004 1.19 ± 0.1 Pitch P1 0.1575 ± 0.004 4.0 ± 0.1 Cavity to Perforation (length direction) P2 0.079 ± 0.002 2.0 ± 0.05 Cavity to Perforation (width direction) F 0.1378 ± 0.002 3.5 ± 0.05 Width C 0.212 ± 0.004 5.4 ± 0.1 Width W 0.315 ± 0.012, -0.004 8.0 ± 0.3, -0.1 16 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 ODS-1072 Tape Dimensions Cavity Description Symbol Size (inches) Size (mm) Length A0 0.100 ± 0.004 2.54 ± 0.1 Width B0 0.140 ± 0.004 3.56 ± 0.1 Depth K0 0.100 ± 0.004 2.54 ± 0.1 Pitch P1 0.157 ± 0.004 4.0 ± 0.1 Cavity to Perforation (length direction) P2 0.079 ± .002 2.0 ± 0.05 Cavity to Perforation (width direction) F 0.217 ± .002 5.5 ± 0.05 Width C 0.366 ± 0.004 9.3 ± 0.1 Width W 0.472 ± .012 12.0 ± 0.3 Description Symbol Size (inches) Size (mm) Length A0 0.126 ± 0.004 3.2 ± 0.1 Width B0 0.215 ± 0.004 5.46 ± 0.1 Depth Pitch K0 P1 0.123 ± 0.004 0.315 ± 0.004 2.54 ± 0.1 8.0 ± 0.1 Cavity to Perforation (length direction) P2 0.079 ± 0.002 2.0 ± 0.05 Cavity to Perforation (width direction) F 0.217 ± 0.002 5.5 ± 0.05 Cover Tape Width C 0.366 ± 0.004 9.3 ± 0.1 Carrier Tape Width W 0.472 ± 0.012 12.0 ± 0.3 Description Symbol Size (inches) Size (mm) Length A0 0.165 ± 0.004 4.19 ± 0.1 Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) B0 K0 P1 0.212 ± 0.004 0.160 ± 0.004 0.315 ± 0.004 5.38 ± 0.1 4.06 ± 0.1 8.0 ± 0.1 P2 0.079 ± 0.002 2.0 ± 0.05 F 0.217 ± 0.002 5.5 ± 0.05 Width Width C W 0.366 ± 0.004 0.472 ± 0.012 9.3 ± 0.1 12.0 ± 0.3 Distance Between Centerlines Cover Tape Carrier Tape ODS-1079 Tape Dimensions Cavity Distance Between Centerlines ODS-1091 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape 17 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 ODS-1294,1295,1306 Description Symbol Size (inches) Size (mm) Length Width A0 B0 0.025 ± 0.002 0.044 ± 0.002 0.63 ± 0.05 1.12 ± 0.05 Cavity Depth K0 0.010 ± 0.002 0.26 ± 0.06 D1 P1 0.020 ± 0.004 0.157 ± 0.004 0.5 ± 0.10 4.0 ± 0.10 Distance Between Centerlines Pocket Hole Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width Width P2 0.079 ± 0.002 2.0 ± 0.05 F 0.138 ± 0.002 3.5 ± 0.05 C W 0.213 ± 0.004 0.315 ± 0.012,-0.00 5.4 ± 0.10 8.0 ± 0.3,-0.00 Tape Dimensions Cover Tape Carrier Tape PDFN-6, 1.2 x 1.5 mm (0.5 mm Lead Pitch) & PDFN-6, 1.5 x 1.2 mm (0.4mm Lead Pitch) Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape Description Symbol Size (inches) Size (mm) Length Width A0 B0 0.069 ± 0.004 0.053 ± 0.004 1.75 ± 0.10 1.35 ± 0.10 Depth K0 0.040 ± 0.004 1.02 ± 0.10 Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width Width P1 0.157 ± 0.004 4.0 ± 0.10 P2 0.079 ± 0.002 2.0 ± 0.05 F 0.138 ± 0.002 3.5 ± 0.05 C W 0.213 ± 0.004 0.315 + 0.012/-0.004 5.4 ± 0.10 8.0 + 0.3/-0.10 Description Symbol Size (inches) Size (mm) Length Width A0 B0 0.095 ± 0.004 0.095 ± 0.004 2.42 ± 0.10 2.42 ± 0.10 Depth K0 0.043 ± 0.004 1.1 ± 0.10 Pitch P1 0.157 ± 0.004 4.0 ± 0.10 Diameter D1 0.039 ± 0.004 1.0 ± 0.10 P2 0.079 ± 0.002 2.0 ± 0.05 F 0.217 ± 0.004 5.5 ± 0.10 C W 0.362 ± 0.004 0.472 ± 0.012 9.2 ± 0.10 12.0 ± 0.30 PDFN-8, 2 mm (MO-229, VCCD-3) Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width Width 18 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 PQFN-12, 3 mm (MO-220, VEED-1), PQFN-16, 3 mm (MO-220,VEED-4, VEED-6) Tape Dimensions Cavity Distance Between Centerlines Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation A0 B0 K0 P1 0.130 ± 0.004 0.130 ± 0.004 0.043 ± 0.004 0.315 ± 0.004 3.3 ± 0.10 3.3 ± 0.10 1.1 ± 0.10 8.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.217 ± 0.004 5.5 ± 0.10 Width C 0.362 ± 0.004 9.2 ± 0.10 Width W 0.472 ± 0.012 12 ± 0.30 (length direction) Cavity to Perforation (width direction) Cover Tape Carrier Tape PQFN-16, 4 mm (MO-220, VGGC), PQFN-20, 4 mm (MO-220, VGGD-1), PQFN-24, 4 mm (MO-220, VGGD-8) Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width A0 B0 K0 P1 0.171 ± 0.004 0.171 ± 0.004 0.043 ± 0.004 0.315 ± 0.004 4.35 ± 0.10 4.35 ± 0.10 1.1 ± 0.10 8.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.217 ± 0.004 5.5 ± 0.10 C 0.362 ± 0.004 9.2 ± 0.10 Width W 0.472 ± 0.012 12 ± 0.30 PQFN-20, 5 mm (MO-220, VHHC), PQFN-28, 5 mm (MO-220, VHHD-1), PQFN-32, 5 mm (MO-220, VHHD-4, VHHD-5) Tape Dimensions Cavity Distance Between Centerlines Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation A0 B0 K0 P1 0.207 ± 0.004 0.207 ± 0.004 0.043 ± 0.004 0.315 ± 0.004 5.25 ± 0.10 5.25 ± 0.10 1.1 ± 0.10 8.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.217 ± 0.004 5.5 ± 0.10 (length direction) Cavity to Perforation (width direction) Cover Tape Width C 0.362 ± 0.004 9.2 ± 0.10 Carrier Tape Width W 0.472 ± 0.012 12 ± 0.30 19 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 PQFN-32, 6x4 mm Tape Dimensions Cavity Carrier Tape Description Symbol Size (inches) Size (mm) Length A0 0.165 ± 0.004 4.2 ± 0.10 Width Depth Pitch Width B0 K0 P1 W 0.244 ± 0.004 0.047 ± 0.004 0.315 ± 0.004 0.472 ± 0.012 6.2 ± 0.10 1.2 ± 0.10 8.0 ± 0.10 12 ± 0.30 Description Symbol Size (inches) Size (mm) Length A0 0.209± 0.004 5.3 ± 0.10 PQFN-32, 6x5 mm Tape Dimensions Cavity Carrier Tape Width B0 0.248 ± 0.004 6.3 ± 0.10 Depth K0 0.047 ± 0.004 1.2 ± 0.10 Pitch P1 0.315 ± 0.004 8.0 ± 0.10 Width W 0.630 ± 0.012 16 ± 0.30 Description Symbol Size (inches) Size (mm) Length A0 0.165 ± 0.004 4.2 ± 0.10 Width B0 0.283 ± 0.004 7.2 ± 0.10 Depth K0 0.047 ± 0.004 1.2 ± 0.10 Pitch P1 0.315 ± 0.004 8.0 ± 0.10 Width W 0.472 ± 0.012 12 ± 0.30 Description Symbol Size (inches) Size (mm) Length A0 0.252 ± 0.004 6.4 ± 0.10 Width B0 0.291 ± 0.004 7.4 ± 0.10 Depth K0 0.047 ± 0.004 1.2 ± 0.10 Pitch P1 0.472 ± 0.004 12.0 ± 0.10 Width W 0.630 ± 0.012 16 ± 0.30 PQFN-36, 7x4 mm Tape Dimensions Cavity Carrier Tape PQFN-37, 7x6 mm Tape Dimensions Cavity Carrier Tape 20 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 QSOP-16, QSOP-16EP Description Symbol Size (inches) Size (mm) Length A0 0.268 ± 0.004 6.8 ± 0.10 Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width Width B0 K0 P1 0.213 ± 0.004 0.063 ± 0.004 0.315 ± 0.004 5.4 ± 0.10 1.6 ± 0.10 8.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.295 ± 0.004 7.5 ± 0.10 C W 0.524 ± 0.004 0.630 ± 0.012 13.3 ± 0.10 16 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) A0 B0 K0 P1 0.256 ± 0.004 0.354 ± 0.004 0.083 ± 0.004 0.315 ± 0.004 6.5 ± 0.10 9.0 ± 0.10 2.1 ± 0.10 8.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.295 ± 0.004 7.5 ± 0.10 Width Width C W 0.524 ± 0.004 0.630 ± 0.012 13.3 ± 0.10 16 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) A0 B0 K0 P1 0.256 ± 0.004 0.406 ± 0.004 0.083 ± 0.004 0.315 ± 0.004 6.5 ± 0.10 10.3 ± 0.10 2.1 ± 0.10 8.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 Cavity to Perforation (width direction) F 0.295 ± 0.004 7.5 ± 0.10 Cover Tape Width C 0.524 ± 0.004 13.3 ± 0.10 Carrier Tape Width W 0.630 ± 0.012 16 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Width A0 B0 K0 P1 W 0.492 ± 0.004 0.508 ± 0.004 0.244 ± 0.004 0.630 ± 0.004 0.945 ± 0.012 12.50 ± 0.10 12.90 ± 0.10 6.10 ± 0.10 16.0 ± 0.10 24.0 ± 0.30 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape QSOP-24 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape QSOP-28 Tape Dimensions Cavity Distance Between Centerlines R-1, R-4, R-5, R-15 Tape Dimensions Cavity Carrier Tape 21 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 SC-70, SOT-323 (3-lead), SOT-353 (5-lead), and SOT-363 (6-lead) Tape Dimensions Cavity Distance Between Centerlines Description Symbol Size (inches) Size (mm) Length A0 0.089 ± 0.004 2.25 ± 0.10 Width B0 0.094 ± 0.004 2.40 ± 0.10 Depth K0 0.047 ± 0.004 1.20 ± 0.10 Pitch P1 0.157 ± 0.004 4.00 ± 0.10 Cavity to Perforation (length direction) P2 0.079 ± 0.004 2.00 ± 0.10 Cavity to Perforation (width direction) F 0.138 ± 0.004 3.50 ± 0.10 Cover Tape Width C 0.213 ± 0.004 5.40 ± 0.10 Carrier Tape Width W 0.315 ± 0.012 8.00 ± 0.30 Tape Dimensions Description Symbol Size (inches) Size (mm) Cavity Length Width Depth Pitch A0 B0 K0 P1 0.035 ± 0.002 0.076 ± 0.002 0.029 ± 0.002 0.157 ± 0.002 0.90 ± 0.05 1.94 ± 0.05 0.73 ± 0.05 4.00 ± 0.05 Cavity to Perforation (length direction) P2 0.079 ± 0.002 2.00 ± 0.05 Cavity to Perforation (width direction) F 0.138 ± 0.002 3.50 ± 0.05 SC-79 Distance Between Centerlines Cover Tape Carrier Tape Width C 0.213 ± 0.004 5.40 ± 0.10 Width W 0.315 +0.012/-0.004 8.00 +0.30/-0.10 SM-1, SM-23, SM-69, SM-87, SM-89, SM-134 Tape Dimensions Cavity Carrier Tape Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Width A0 B0 K0 P1 W 0.275 ± 0.004 0.335 ± 0.004 0.209 ± 0.004 0.472 ± 0.004 0.630 ± 0.012 7.00 ± 0.10 8.50 ± 0.10 5.30 ± 0.10 12.0 ± 0.10 16.0 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Width A0 B0 K0 P1 W 0.401 ± 0.004 0.530 ± 0.004 0.240 ± 0.004 0.472 ± 0.004 0.945 ± 0.012 10.26 ± 0.10 13.46 ± 0.10 6.10 ± 0.10 12.0 ± 0.10 24.0 ± 0.30 SM-2, SM-4, SM-74, SM-108 Tape Dimensions Cavity Carrier Tape 22 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 SM-3 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Width A0 B0 K0 P1 W 0.807 ± 0.004 0.807 ± 0.004 0.209 ± 0.004 0.945 ± 0.004 1.260 ± 0.012 20.50 ± 0.10 20.50 ± 0.10 5.30 ± 0.10 24.0 ± 0.10 32.00 ± 0.30 Description Symbol Size (inches) Size (mm) Length A0 0.642 ± 0.004 16.30 ± 0.10 Cavity Width Depth Pitch B0 K0 P1 0.843 ± 0.004 0.220 ± 0.004 0.945 ± 0.004 21.40 ± 0.10 5.60 ± 0.10 24.00 ± 0.10 Carrier Tape Width W 1.260 ± 0.012 32.00 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Width A0 B0 K0 P1 W 0.319 ± 0.004 0.606 ± 0.004 0.280 ± 0.004 0.472 ± 0.004 0.945 ± 0.012 8.10 ± 0.10 15.40 ± 0.10 7.10 ± 0.10 12.0 ± 0.10 24.0 ± 0.30 Tape Dimensions Description Symbol Size (inches) Size (mm) Cavity Length Width Depth Pitch A0 B0 K0 P1 0.169 ± 0.004 0.197 ± 0.004 0.110 ± 0.004 0.315 ± 0.004 4.30 ± 0.10 5.00 ± 0.10 2.80 ± 0.10 8.00 ± 0.10 Carrier Tape Width W 0.472 ± 0.012 12.00 ± 0.30 Tape Dimensions Description Symbol Size (inches) Size (mm) Cavity Length Width Depth Pitch A0 B0 K0 P1 0.413 ± 0.004 0.323 ± 0.004 0.220 ± 0.004 0.630 ± 0.004 10.50 ± 0.10 8.28 ± 0.10 5.50 ± 0.10 16.0 ± 0.10 Carrier Tape Width W 0.945 ± 0.012 24.0 ± 0.30 Tape Dimensions Cavity Carrier Tape SM-7-1 Tape Dimensions SM-20 Tape Dimensions Cavity Carrier Tape SM-22 SM-24 23 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 SM-26 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Width A0 B0 K0 P1 W 0.476 ± 0.004 0.780 ± 0.004 0.217 ± 0.004 0.630 ± 0.004 1.260 ± 0.012 12.10 ± 0.10 19.80 ± 0.10 5.50 ± 0.10 16.0 ± 0.10 32.00 ± 0.30 Tape Dimensions Description Symbol Size (inches) Size (mm) Cavity Length Width Depth Pitch A0 B0 K0 P1 0.476 ± 0.004 0.831 ± 0.004 0.256 ± 0.004 0.945 ± 0.004 12.10 ± 0.10 21.10 ± 0.10 6.50 ± 0.10 24.00 ± 0.10 Carrier Tape Width W 1.260 ± 0.012 32.00 ± 0.30 Description Symbol Size (inches) Size (mm) Length A0 0.272 ± 0.004 6.90 ± 0.10 Width Depth Pitch B0 K0 P1 0.331 ± 0.004 0.291 ± 0.004 0.472 ± 0.004 8.40 ± 0.10 7.40 ± 0.10 12.0 ± 0.10 Width W 0.945 ± 0.012 24.0 ± 0.30 Tape Dimensions Description Symbol Size (inches) Size (mm) Cavity Length Width Depth Pitch A0 B0 K0 P1 0.295 ± 0.004 0.331 ± 0.004 0.217 ± 0.004 0.472 ± 0.004 7.50 ± 0.10 8.40 ± 0.10 5.50 ± 0.10 12.0 ± 0.10 Carrier Tape Width W 0.630 ± 0.012 16.0 ± 0.30 Tape Dimensions Description Symbol Size (inches) Size (mm) Cavity Length Width Depth Pitch A0 B0 K0 P1 0.823 ± 0.004 0.449 ± 0.004 0.268 ± 0.004 0.945 ± 0.004 20.90 ± 0.10 11.40 ± 0.10 6.80 ± 0.10 24.00 ± 0.10 Carrier Tape Width W 1.260 ± 0.012 32.00 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Width A0 B0 K0 P1 W 0.220 ± 0.004 0.220 ± 0.004 0.118 ± 0.004 0.315 ± 0.004 0.472 ± 0.012 5.60 ± 0.10 5.60 ± 0.10 3.00 ± 0.10 8.00 ± 0.10 12.00 ± 0.30 Tape Dimensions Cavity Carrier Tape SM-28 SM-41 Tape Dimensions Cavity Carrier Tape SM-44, SM-68 SM-46 SM-52 Tape Dimensions Cavity Carrier Tape 24 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 SM-55 Tape Dimensions Cavity Carrier Tape Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Width A0 B0 K0 P1 W 0.268 ± 0.004 0.299 ± 0.004 0.138 ± 0.004 0.472 ± 0.004 0.630 ± 0.012 6.80 ± 0.10 7.60 ± 0.10 3.50 ± 0.10 12.00 ± 0.10 16.00 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Width A0 B0 K0 P1 W 0.421 ± 0.004 0.818 ± 0.004 0.236 ± 0.004 0.944 ± 0.004 1.260 ± 0.012 10.70 ± 0.10 20.80 ± 0.10 6.00 ± 0.10 24.00 ± 0.10 32.00 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) A0 B0 K0 P1 0.057 ± 0.004 0.114 ± 0.002 0.049 ± 0.002 0.157 ± 0.004 1.46 ± 0.10 2.90 ± 0.05 1.25 ± 0.05 4.0 ± 0.10 P2 0.079 ± 0.002 2.0 ± 0.05 F 0.138 ± 0.002 3.5 ± 0.05 Width C 0.213 ± 0.004 5.40 ± 0.10 Width W 0.315 +0.012/-0.004 8.0 +0.30/-0.10 Description Symbol Size (inches) Size (mm) Length A0 0.126 ± 0.004 3.2 ± 0.10 Width Depth Pitch Cavity to Perforation (length direction) B0 K0 P1 0.126 ± 0.004 0.055 ± 0.004 0.157 ± 0.004 3.2 ± 0.10 1.4 ± 0.10 4.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.138 ± 0.004 3.5 ± 0.10 Width C 0.213 ± 0.004 5.4 ± 0.10 Width W 0.315 ± 0.012 8.0 ± 0.30 SM-106 Tape Dimensions Cavity Carrier Tape SOD-323 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape SOT-25, SOT-26 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape Cavity to Perforation (width direction) 25 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 SOIC-8 (SO-8) Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width Width A0 B0 K0 P1 0.252 ± 0.004 0.205 ± 0.004 0.083 ± 0.004 0.315 ± 0.004 6.4 ± 0.10 5.2 ± 0.10 2.1 ± 0.10 8.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.217 ± 0.004 5.5 ± 0.10 C W 0.366 ± 0.004 0.472 ± 0.012 9.2 ± 0.10 12.0 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width Width A0 B0 K0 P1 0.256 ± 0.004 0.354 ± 0.004 0.083 ± 0.004 0.315 ± 0.004 6.5 ± 0.10 9.0 ± 0.10 2.1 ± 0.10 8.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 SOIC-14 (SO-14), SSOP-24 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape F 0.295 ± 0.004 7.5 ± 0.10 C W 0.524 ± 0.004 0.630 ± 0.012 13.3 ± 0.10 16.0 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width Width A0 B0 K0 P1 0.256 ± 0.004 0.406 ± 0.004 0.083 ± 0.004 0.315 ± 0.004 6.5 ± 0.10 10.3 ± 0.10 2.1 ± 0.10 8.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.295 ± 0.004 7.5 ± 0.10 C W 0.524 ± 0.004 0.630 ± 0.012 13.3 ± 0.10 16.0 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width A0 B0 K0 P1 0.429 ± 0.004 0.421 ± 0.004 0.118 ± 0.004 0.472 ± 0.004 10.9 ± 0.10 10.7 ± 0.10 3.0 ± 0.10 12.0 ± 0.10 P2 0.079 ± 0.004 2. 0 ± 0.10 F 0.295 ± 0.004 7.5 ± 0.10 C 0.524 ± 0.004 13.3 ± 0.10 Width W 0.630 ± 0.012 16.0 ± 0.30 SOIC-16 (SO-16), SSOP-28 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape SOIC-16 Wide Body (SOW-16) Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape 26 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 SOIC-24 (SO-24) Tape Dimensions Cavity Distance Between Centerlines Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) A0 B0 K0 P1 0.421 ± 0.008 0.622 ± 0.008 0.118 ± 0.004 0.472 ± 0.004 10.7 ± 0.2 15.8 ± 0.2 3.0 ± 0.10 12.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.453 ± 0.004 11.5 ± 0.10 Cavity to Perforation (width direction) Cover Tape Carrier Tape Width C 0.79 Nom. 20.0 Nom. Width W 0.945 ± 0.012 24.0 ± 0.30 Tape Dimensions Description Symbol Size (inches) Size (mm) Cavity Length Width Depth Pitch A0 B0 K0 P1 0.123 ± 0.005 0.112 ± 0.006 0.048 ± 0.004 0.157 ± 0.004 3.125 ± 0.125 2.835 ± 0.165 1.23 ± 0.11 4.0 ± 0.10 Cavity to Perforation (length direction) P2 0.079 ± 0.004 2.0 ± 0.10 Cavity to Perforation (width direction) F 0.138 ± 0.004 3.5 ± 0.10 Width C 0.212 ± 0.004 5.4 ± 0.10 Width W 0.315 ± 0.012 8.0 ± 0.30 Tape Dimensions Description Symbol Size (inches) Size (mm) Cavity Length Width Depth Pitch A0 B0 K0 P1 0.122 ± 0.004 0.106 ± 0.004 0.051 ± 0.004 0.157 ± 0.004 3.1 ± 0.10 2.69 ± 0.10 1.30 ± 0.10 4.0 ± 0.10 Cavity to Perforation (length direction) P2 0.079 ± 0.004 2.0 ± 0.10 Cavity to Perforation (width direction) F 0.138 ± 0.004 3.5 ± 0.10 Width C 0.212 ± 0.004 5.4 ± 0.10 Width W 0.315 ± 0.012 8.0 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width Depth Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width A0 B0 K0 P1 0.181 ± 0.004 0.188 ± 0.004 0.075 ± 0.004 0.315 ± 0.004 4.6 ± 0.10 4.78 ± 0.10 1.9 ± 0.10 8.0 ± 0.10 P2 0.079 ± 0.004 2.0 ± 0.10 F 0.217 ± 0.020 5.5 ± 0.5 C 0.366 ± 0.004 9.3 ± 0.10 Width W 0.472 ± 0.008 12.0 ± 0.20 SOT-23 Distance Between Centerlines Cover Tape Carrier Tape SOT-143 Distance Between Centerlines Cover Tape Carrier Tape SOT-89 Tape Dimensions Cavity Distance Between Centerlines 27 Cover Tape Carrier Tape M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 SSOP-8 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape Description Symbol Size (inches) Size (mm) Length A0 0.134 ± 0.004 3.4 ± 0.10 Width B0 0.327 ± 0.004 8.3 ± 0.10 Depth K0 0.100 ± 0.004 2.54 ± 0.10 Pitch Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width P1 0.315 Nom. 8.0 Nom. P2 0.079 ± 0.004 2.0 ± 0.10 F 0.295 ± 0.004 7.5 ± 0.10 C 0.524 ± 0.004 13.3 ± 0.10 Width W 0.630 ± 0.012 16.0 ± 0.30 Description Symbol Size (inches) Size (mm) Length A0 0.322 ± 0.004 8.2 ± 0.10 Width Depth Pitch B0 K0 P1 0.295 ± 0.004 0.099 ± 0.004 0.472 ± 0.004 7.5 ± 0.10 2.5 ± 0.10 12.0 ± 0.10 Cavity to Perforation (length direction) P2 0.079 ± 0.004 2.0 ± 0.10 Cavity to Perforation (width direction) F 0.295 ± 0.004 7.5 ± 0.10 SSOP-20 Tape Dimensions Cavity Distance Between Centerlines Cover Tape Width C 0.524 ± 0.004 13.3 ± 0.10 Carrier Tape Width W 0.630 ± 0.012 16.0 ± 0.30 Description Symbol Size (inches) Size (mm) Length Width A0 B0 0.090 ± 0.004 0.090 ± 0.004 2.3 ± 0.10 2.3 ± 0.10 Depth K0 0.030 ± 0.004 0.75 ± 0.10 Pitch P1 0.157 ± 0.004 4.0 ± 0.10 Diameter D1 0.039 ± 0.010 1.0 ± 0.25 P2 0.079 ± 0.002 2.0 ± 0.05 F 0.138 ± 0.002 3.5 ± 0.05 C W 0.216 ± 0.004 0.315 ± 0.012 5.5 ± 0.10 8.0 ± 0.30 STDFN-8, 2 mm, STQFN-12, 2 mm Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width Width 28 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 STQFN-14, 2 x 2.5 mm Tape Dimensions Description Symbol Size (inches) Size (mm) Length Width A0 B0 0.087 ± 0.004 0.106 ± 0.004 2.2 ± 0.10 2.7 ± 0.10 Depth K0 0.028 ± 0.002 0.7 ± 0.05 Pitch P1 0.157 ± 0.004 4.0 ± 0.10 Diameter D1 0.028 ± 0.004 0.7 ± 0.10 P2 0.079 ± 0.002 2.0 ± 0.05 F 0.138 ± 0.004 3.5 ± 0.10 C W 0.217 ± 0.004 0.315 ± 0.012 5.5 ± 0.10 8.0 ± 0.30 Description Symbol Size (inches) Size (mm) Length A0 0.274 ± 0.004 6.95 ± 0.10 Width Depth Pitch B0 K0 P1 0.220 ± 0.004 0.063 ± 0.004 0.315 ± 0.004 5.6 ± 0.10 1.6 ± 0.10 8.0 ± 0.10 Cavity to Perforation (length direction) P2 0.079 ± 0.004 2.0 ± 0.10 Cavity to Perforation (width direction) F 0.295 ± 0.004 7.5 ± 0.10 Width C 0.524 ± 0.004 13.3 ± 0.10 Width W 0.630 ± 0.012 16 ± 0.30 Description Symbol Size (inches) Size (mm) Length A0 0.047 + 0.00/-0.002 1.2 + 0.00/-0.05 Width Depth Pitch B0 K0 P1 0.047 + 0.00/-0.002 0.022 ± 0.002 0.157 ± 0.004 1.2 + 0.00/-0.05 0.55 ± 0.05 4.0 ± 0.10 Cavity to Perforation (length direction) P2 0.079 ± 0.002 2.0 ± 0.05 Cavity to Perforation (width direction) F 0.138 ± 0.004 3.5 ± 0.10 Width C 0.217 ± 0.004 5.5 ± 0.10 Width W 0.315 ± 0.012 8.0 ± 0.30 Cavity Distance Between Centerlines Cover Tape Carrier Tape Cavity to Perforation (length direction) Cavity to Perforation (width direction) Width Width TSSOP-16, TSSOP-16EP Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape X1DFN-6, 1 mm Tape Dimensions Cavity Distance Between Centerlines Cover Tape Carrier Tape 29 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 Component Orientation for Tape and Reel 8mm BGA BD-3, Bumped Die, 0.485 x 0.605 mm (bumps facing down) User Direction of Feed 15mm BGA BD-1, Bumped Die, 0.705 mm Sq. (bumps facing down) User Direction of Feed BD-2, Bumped Die, 0.925 x 1.095 mm (bumps facing down) User Direction of Feed 30 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 Component Orientation for Tape and Reel LSM1, LSM6 RT3 LSM1, LSM6 TRS LSM2 TR3 ODS-1294,1295 & 1306 USER DIRECTION OF FEED 31 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 Component Orientation for Tape and Reel PDFN-6, 1.2 X1.5 mm (0.5 mm Lead Pitch) PQFN-16, 4 mm (MO-220, VGGC), PQFN-20, 4 mm (MO-220, VGGD-1), PQFN-24, 4 mm (MO-220, VGGD-8) PDFN-6, 1.5 X1.2 mm (0.4 mm Lead Pitch) PQFN-20, 5 mm (MO-220,VHHC), PQFN-28, 5 mm (MO-220, VHHD-1), PQFN-32, 5 mm (MO220,VHHD-4, VHHD-6) Q PDFN-8, 2 mm (MO-229, VCCD-3), SDTFN-8, 2 mm, STQFN-12, 2 mm PQFN-12, 3 mm (MO-220, VEED-1), PQFN-16, 3 mm (MO-220, VEED-4, VEED-5) , Q PQFN-32, 6X4 mm PQFN-32, 6X5 mm 32 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 Component Orientation for Tape and Reel PQFN-36, 7X4MM QSOP-28, SOIC-16 (ANDANTEK CARRIER TAPE SOIC-AC90.0P2 PQFN-37, 7X6MM QSOP-16, QSOP-16EP, TSSOP-16 QSOP-24, SOIC-14 R-1, R-4, R-15 SC-70, SOT-323, SOT-353, SOT-363 SC-79, SOD-323 SC-79, SOD-323 33 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 Component Orientation for Tape and Reel SM-1, SM-23, SM-41, SM-69, SM-87, SM-89, SM-134 SM-2, SM-4, SM-44, SM-68, SM-74, SM-108 SM-22 SM-3, SM-26 SM-46 34 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 Component Orientation for Tape and Reel SM-52 SM-106 35 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 Component Orientation for Tape and Reel SSOP-28 STQFN-14, 2 x 2.5 mm SSOP-24 X1DFN-6, 1 mm 36 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 Reel Information1,2 Package Type Max. Devices per Reel Reel Diameter (inches) 8-mm BGA, 15-mm BGA 1,000 13 BD-1, BD-2, BD-3 3000 7 CR-5 2,500 13 LSM1, LSM2, LSM3, LCC1 500 13 1,000 7 3,000 13 ODS-4, ODS-54, ODS-139, ODS-146, ODS-401 3,000 10 ODS-120 2,000 7 MSOP8, MSOP-8EP, MSOP-10 ODS-186 750 7 ODS-402 2,000 10 ODS-1056 2,500 7 ODS-1072 5,000 13 ODS-1079 750 7 ODS-1091 500 7 ODS-1295,1295,1306 3000 7 PDFN-6, 1.2 x 1.5 mm (0.5 mm pitch), PDFN-6, 1.5 x 1.2 mm (0.4 mm pitch) 3000 7 PDFN-8, 2 mm (MO-229, VCCD-3) 3000 13 STDFN-8, 2 mm, STQFN-12, 2 mm STQFN-14, 2 x 2.5 mm X1DFN-6, 1 mm 3000 7 1,000 7 3,000 13 1,000 7 1,000 7 3,000 13 1,000 7 1,000 7 PQFN-12, 3 mm (MO-220, VEED-1), PQFN-16, 3 mm (MO-220, VEED-4, VEED-6), PQFN-16, 4 mm (MO-220, VGGC), PQFN-20, 4 mm (MO-220, VGGD-1), PQFN-24, 4 mm (MO-220, VGGD-8) PQFN-20, 5 mm (MO-220, VHHC), PQFN-28, 5 mm (MO-220, VHHD-1), PQFN-32, 5 mm (MO-220, VHHD-4, VHHD-5) PQFN-36, 6 x 5 mm PQFN-32, 6 x 4 mm, PQFN-36, 7 x 4 mm PQFN-37, 7 x 6 mm 3,000 13 QSOP-16, QSOP-16EP, QSOP-24, QSOP-28 1,000 7 R-1, R-4, R-5, R-15 500 13 SC-70, SC-79, SOT-23, SOT-25, SOT-26, SOT-89, S0T-143, SOT353, SOT-363, S0T-323, SOD-323 3,000 7 37 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information. Application Note M513 Tape and Reel Packaging for Surface Mount Components Rev. V16 Reel Information (continued) 1,2 Package Type Max. Devices per Reel Reel Diameter (inches) SM-1, SM-55, SM-69 900 13 SM-2, SM-4, SM-7-1, SM-20, SM-23, SM-24, SM-41, SM-44 500 13 SM-3, SM-26, SM-28, SM-46, LSM6 300 13 SM-22 2,000 13 SM-52 2,500 13 SM-68, SM-74, SM-106, SM-108 500 13 SM-87, SM-89, SM-134 900 13 1,000 7 3,000 13 2,000 (E-Series) 13 1,000 7 3,000 13 1,000 13 900 7 3,000 13 1,000 13 1,000 7 2,500 13 SOIC-8 (SO-8) SOIC 14 (SO-14), SOIC 16 (SO-16) SOIC-16 Wide Body (SOW-16), SOIC-24 (SO-24), SOW-24 SSOP-8 SSOP-20. SS0P-24, SSOP 28 TSSOP-16, TSSOP-16EP 1. See individual data sheets for part number ordering information. 2. Most device in tape and reel must be ordered in multiples of 100 pieces, with a minimum order quantity of either 200 or 500 pieces per part number. Consult factory for individual package types. 38 M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 Visit www.macomtech.com for additional data sheets and product information.