MA-COM MADR-008888

MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Features
Rev. V4
Functional Diagram (TOP VIEW)








Exceptional Broadband Performance, 0.05 - 6.0 GHz
Low Loss: Tx = 0.24 dB Avg @ 2025 MHz, 35mA
Tx = 0.38 dB Avg @ 3500 MHz, 35mA
High Isolation: Rx = 31.0 dB Avg @ 2025 MHz
Rx = 27 dB Avg @ 3500 MHz
High RF C.W. Input Power: 20 W C.W. (Tx-Ant Port)
Higher IIP3: > 64 dBm (Tx-Ant Port )
Suitable for High Power TD-SCDMA & WiMAX
Applications
 Surface Mount 3mm PQFN Package
 RoHS* Compliant and 260°C Re-flow Compatible
PIN14
PIN10
PIN 3
Description and Applications
The MASW-000825-12770T is a compact SP2T PIN diode
switch in a lead-free 3mm MLP plastic package that offers
extraordinary performance with excellent isolation to
loss ratio for both TX and RX states. The SP2T provides
outstanding 20 W C.W. power handling coupled with 64
dBm IIP3 for maximum switch performance.
Circuit Side View
The MASW-000825-12770T is a 0.05 - 6.0GHz SP2T High
Peak and Average Power PIN diode switch used for T/R or
LNA Protect Switch applications such as WiMAX and TDSCDMA.
This device incorporates a PIN diode die fabricated with
M/A-COM Technology Solutions patented Silicon-Glass
HMICTM process. This chip features two silicon pedestals
embedded in a low loss, low dispersion glass. The diodes
are formed on the top of each pedestal. The topside is fully
encapsulated with silicon nitride and has an additional
polymer passivation layer. These polymer protective
coatings prevent damage and contamination during handling and assembly.
PIN1
Pin Configuration:
(Center Metal Area is RF, D.C., and Thermal Ground)
PIN
Function
PIN
Function
1
N/C
9
GND
2
GND
10
Rx
3
TX
11
GND
4
GND
12
N/C
5
N/C
13
GND
6
N/C
14
Ant
7
N/C
15
GND
8
N/C
16
N/C
Ordering Information
Part Number
Package
MASW-000825-12770T
1000 piece reel
MASW-000825-001SMB
Sample Board
MADR-008888-0002TB
Sample Board with recommended
external Driver & MASW-00082512770T Switch
PIN 16
PIN
IDENTIFIER
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
Electrical Specifications at +25°C, Characteristic Impedance Z0 = 50 Ω, 35mA/28V
Parameter
Symbol
35mA / 28V Conditions
Units
Insertion Loss, Rx
Rx, IL
Bias: See Table Below, Pinc= 0 dBm
Insertion Loss, Tx
Tx, IL
Isolation, Tx To Rx
Min.
Typ.
Max.
dB
0.42
0.55
Bias: See Table Below, Pinc= 0 dBm
dB
0.29
0.38
Rx, ISO
Bias: See Table Below, Pinc= 0 dBm
dB
24.5
28.6
Isolation, Rx To Tx
Tx, ISO
Bias: See Table Below, Pinc= 0 dBm
dB
21.3
24.2
Tx Input Return Loss
Tx, RL
Bias: See Table Below, Pinc= 0 dBm
dB
- 28
Rx Input Return Loss
Rx, RL
Bias: See Table Below, Pinc= 0 dBm
dB
- 28
Insertion Loss, Rx
Rx,IL
Bias: See Table Below, Pinc= 0 dBm
dB
0.56
0.71
Insertion Loss, Tx
Tx, IL
Bias: See Table Below, Pinc= 0 dBm
dB
0.38
0.48
Isolation, Tx To Rx
Rx, ISO
Bias: See Table Below, Pinc= 0 dBm
dB
22
26
Isolation, Rx To Tx
Tx, ISO
Bias: See Table Below, Pinc= 0 dBm
dB
19.7
21.6
Tx Input Return Loss
Tx, RL
Bias: See Table Below, Pinc= 0 dBm
dB
- 28
Rx Input Return Loss
Rx, RL
Bias: See Table Below, Pinc= 0 dBm
dB
-28
Insertion Loss, Rx
Rx, IL
Bias: See Table Below, Pinc= 0 dBm
dB
0.95
1.10
Insertion Loss, Tx
Tx, IL
Bias: See Table Below, Pinc= 0 dBm
dB
0.59
0.71
Isolation, Tx To Rx
Rx, ISO
Bias: See Table Below, Pinc= 0 dBm
dB
19.5
22.4
Isolation, Rx To Tx
Tx, ISO
Bias: See Table Below, Pinc= 0 dBm
dB
16.5
18.5
Tx Input Return Loss
Tx, RL
Bias: See Table Below, Pinc= 0 dBm
dB
- 25
Rx Input Return Loss
Rx, RL
Bias: See Table Below, Pinc= 0 dBm
dB
- 24
F = 2.0-2.7 GHz
F = 3.3-3.8 GHz
F = 4.9-5.9 GHz
Port
Tx
Rx
ANT
Pin
Pin 3
Pin 10
Pin 14
Tx-ANT Isolation
+28V @ 0 ma
0V
+ 5V @ 35 mA
Tx-ANT Insertion Loss
0V
+28V @ 0 ma
+ 5V @ 35 mA
Rx-ANT Isolation
0V
+28V @ 0 ma
+ 5V @ 35 mA
Rx-ANT Insertion Loss
+28V @ 0 ma
0V
+ 5V @ 35 mA
2
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
Electrical Specifications at +25°C, Characteristic Impedance, Z0 = 50 Ω
Parameter
Symbol
Conditions
Units
Tx 2nd Harmonic
Tx
2Fo
Fo=2.010 GHz, Tx = +5.0 V@ +35mA,
Rx =+28V @ 0mA
Pin = + 30 dBm, Tx To Antenna
dBc
70
Tx 3rd Harmonic
Tx
3Fo
Fo= 2.010 GHz, Tx = +5.0 V@ +35mA,
Rx =+28V @ 0mA
Pin = + 30 dBm, Tx To Antenna
dBc
86
Tx Input Third Order Intercept Point
Tx
IIP3
Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA
Pi= +20 dBm,
F1 = 2.010 GHz, F2 = 2.020 GHz,
Tx To Antenna
dBm
64
2
Tx C.W. Input Power
Tx
CW Pinc
Tx = +5.0 V@ +35mA,
Rx =+28V @ 0mA
F = 2.010, 3.500 GHz, Tx To Antenna
dBm
W
43
20
Tx Peak Input Power
Tx
Pk Pinc
Tx = +5.0 V@ +35mA,
Rx =+28V @ 0mA
F = 2.010 GHz, Tx To Antenna
( 5 μS RF Pulse Width, 1% Duty 1.10:1 Ant
VSWR )
dBm
W
53
200
Rx C.W. Input Power
Rx
CW Pinc
Rx = +5.0 V@ +35mA, Tx =+28V @ 0mA
F = 2.010 GHz, Antenna to Rx
dBm
W
39
8
Tx Input P1dB
Tx
P1dB
Tx = +5.0 V@ +35mA,
Rx =+28V @ 0mA
F = 2.010, GHz, Tx To Antenna
Tx RF Switching Speed
RF
( 10% - 90% RF Voltage)
Tx = +5.0 V@ +35mA, Rx =+28V @ 0mA
F = 2.010 GHz, Tx To Antenna
1MHz Rep Rate in Modulating Mode
dBm
ns
Min
Typ
Max
>43
200
Absolute Maximum Ratings 1
Handling Procedures
@ TA = +25 °C (unless otherwise specified)
Please observe the following precautions to avoid
damage:
Parameter
Absolute Maximum
Forward Current
100 mA
Reverse Voltage ( RF & D.C. )
-140 V
Operating Temperature
-40 °C to +85 °C
Storage Temperature
-55 °C to +150 °C
Junction Temperature
+175 °C
2
Tx Incident C.W. Power
20 W C.W.
Tx Peak Incident Power
With 3.0:1 Maximum Ant VSWR
150 W, 5 uS P.W., 1% Duty
Static Sensitivity
These devices are rated Class 1B Human Body.
Proper ESD control techniques should be used
when handling these devices.
1. Exceeding these limits may cause permanent damage.
2. Refer to page 7 of the datasheet for power handling curves.
3
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
D.C. Bias to RF Truth Table
RF State
TTL & D.C. Bias Conditions
Voltage at Common Anode
Low Loss Tx-Ant &
Isolation Tx-Rx
Low Loss Ant-Rx &
Isolation Rx-Tx
TTL = 1
+ 5V @ 35 mA ( Tx ), + 28V @ 0 mA ( Rx )
TTL = 0
+ 5V @ 35 mA ( Rx ), + 28V @ 0 mA ( Tx )
+ 0.9 V
+ 0.9 V
Driver and SP2T Schematic with Positive Voltage
Ant
DC Block
LBias
R5
+5 V
Bypass 180 Ω
DC Block
TX
DC Block
LBias
SP2T
Bypass
RX
LBias
Bypass
MADR-008888-000100
Logic Input
Driver
Ground
Notes:
1. Data is taken on M/A-COM evaluation board 1000029181-0000001 @ 25C by removing peripheral
board losses ( connectors, transmission line, and bias elements ).
2. Typical PIN Diode Forward Voltage = + 0.9 V @ + 35 mA for Insertion Loss.
Typical PIN Diode Reverse Voltage = 28 V – 1.0 V = 27 V for Isolation.
3. Switch is Asymmetrical, + 43 dBm RF C.W. Input Power Applies to Tx Port Only.
4. Center Ground Area of MLP 3mm Package must be Attached to Thermal Ground for Optimum RF
Power Performance.
5. M/A-Com Recommends the usage of the MADR-008888-000100 driver with this switch.
Assembly Note:
A typical soldering process profile and handling instructions are provided in Application Notes, S2083
“Surface Mount Instructions for QFN / DFN Packages” on the M/A-Com website at www.macomtech.com
4
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
Typical Small Signal Performance at +25°C, Characteristic Impedance, Z0 = 50 Ω
MASW-000825-1277OT, TX/RX Insertion Loss
Bias:+5V @ 35mA
MASW-000825-1277OT, TX/RX Isolation
Bias:+28V @ 0mA
0.0
-15.0
-0.1
RX
-0.2
-25.0
-0.3
Isolation (dB)
Insertion Loss (dB)
-20.0
TX
-0.4
-0.5
-30.0
-40.0
-45.0
-0.7
-50.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
RX
-35.0
-0.6
-0.8
0.0
TX
-55.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
MASW-000825-1277OT, TX/RX Return Loss
Bias:+5V @ 35mA
0.0
-5.0
Return Loss (dB)
-10.0
-15.0
TX
RX
-20.0
-25.0
-30.0
-35.0
-40.0
0.0
1.0
2.0
3.0
4.0
5.0
6.0
Frequency (GHz)
5
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
Typical Small Signal Performance over Temperature Characteristic Impedance,
Z0 = 50 Ω
MASW-000825-1277OT, TX to Antenna
TX Diode Tj Vs. Bias Current
Bias: TX= +5V @ 20mA and 30mA, RX = +25V @ 0mA, Fo = 2010 MHz
PCB Temperature is +25ºC
200.0
MASW-000825-1277OT, TX to Antenna
Maximum Pin Vs. PCB/Heatsink Temperature Vs. Bias Current
Bias: +5V @ 20mA and 30mA, RX = +25V @ 0mA, Fo = 2010 MHz
44.0
175.0
43.5
150.0
Pin (dBm)
100.0
75.0
42.0
41.5
41.0
25.0
40.5
32.0
34.0
36.0
38.0
40.0
42.0
40.0
25.0
44.0
35.0
45.0
55.0
65.0
75.0
85.0
Pin (dBm)
PCB/Heatsink Temperature (ºC)
MASW-000825-1277OT, TX Insertion Loss Vs. Temperature
Bias:+5V @ 35mA
MASW-000825-1277OT, RX Insertion Loss Vs. Temperature
Bias:+5V @ 35mA
0.0
0.0
-0.1
-0.1
-0.2
-0.2
Insertion Loss (dB)
Insertion Loss (dB)
42.5
50.0
0.0
30.0
20mA
35mA
35mA
125.0
Tj (ºC)
43.0
20mA
-0.3
-0.4
-0.5
+25ºC
-40ºC
+85ºC
-0.6
-0.4
-0.5
+25ºC
-40ºC
+85ºC
-0.6
-0.7
-0.8
0.0
-0.3
-0.7
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
3.0
3.5
4.0
-0.8
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
6
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
Typical Small Signal Performance over temperature Characteristic Impedance,
Z0 = 50 Ω
MASW-000825-1277OT, RX Isolation Vs. Temperature
Bias:+28V @ 0mA
0.0
-15.0
-0.1
-20.0
-0.2
-25.0
Isolation (dB)
Insertion Loss (dB)
MASW-000825-1277OT, TX Insertion Loss Vs. Temperature
Bias:+5V @ 35mA
-0.3
-0.4
-0.5
+25ºC
-40ºC
+85ºC
-0.6
-35.0
-40.0
+25ºC
-40ºC
+85ºC
-45.0
-50.0
-0.7
-0.8
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
-55.0
0.0
4.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
Frequency (GHz)
MASW-000825-1277OT, TX Return Loss Vs. Temperature
Bias:+5V @ 35mA
MASW-000825-1277OT, RX Return Loss Vs. Temperature
Bias:+5V @ 35mA
-20.0
-20.0
-25.0
-25.0
Return Loss (dB)
Return Loss (dB)
-30.0
-30.0
+25ºC
-40ºC
+85ºC
-35.0
-40.0
0.0
0.5
1.0
1.5
-30.0
+25ºC
-40ºC
+85ºC
-35.0
2.0
2.5
Frequency (GHz)
3.0
3.5
4.0
-40.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Frequency (GHz)
7
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000825-12770T
HMICTM PIN Diode SP2T 20 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V4
MASW-000825-12770T Outline† – Lead Free 3mm PQFP-N 16 Lead Saw Singulated
ANT Port
PIN 14
TX Port
TX Port
PIN
3
PIN 3
RX Port
PIN 10
ANT Port
PIN 14
† Reference Application Note S2083 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
8
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.