MA-COM MASW-000834_13560T

MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Features
Functional Diagram (TOP VIEW)
•
•
•
•
•
•
•
•
Exceptional Broadband Performance, 0.05 - 6.0 GHz
Low Loss: TX = 0.33 dB @ 2010 MHz, 5V / 20mA
Low Loss: TX = 0.38 dB @ 3.5 GHz, 5V / 20mA
High Isolation: Rx = 44dB @ 2010 MHz, 20mA / 5V
High Isolation: Rx = 36dB @ 3.5 GHz, 20mA / 5V
High TX RF Input Power = 50 W C.W. @ 2010MHz
High Tx RF Input Peak Power > 1000 W
Suitable for Very High Power TD-SCDMA & WiMAX
Applications
• Surface Mount 4mm PQFN Package, RoHS* Compliant
Description and Applications
The MASW-000834-13560T is a SPDT Broadband, high
linearity, common anode, PIN diode T/R switch for 0.05 6.0 GHz applications, including WiMAX & WiFi. The
device is provided in industry standard 4mm PQFN plastic
packaging. This device incorporates a PIN diode die
fabricated with M/A-COM Technology Solutions patented
Silicon-Glass HMICTM process. This chip features two
silicon pedestals embedded in a low loss, low dispersion
glass. The diodes are formed on the top of each pedestal.
The topside is fully encapsulated with silicon nitride and
has an additional polymer passivation layer. These
polymer protective coatings prevent damage and
contamination during handling and assembly.
This compact 4mm PQFN package, SPDT switch offers
wideband 0.05 - 6.0 GHz performance with excellent
isolation to loss ratio for both TX and RX states. The PIN
diode provides 50 W typical C.W. power handling and 65
dBm IIP3 at 2010 MHz
for
maximum
switch
performance.
Absolute Maximum Ratings 1,2
@ TA = +25 °C (unless otherwise specified)
Parameter
Absolute Maximum
Forward Current
| 100 mA |
Reverse Voltage ( RF & D.C. )
| -200 V |
Operating Temperature
-40 °C to +85 °C
Storage Temperature
-55 °C to +150 °C
Junction Temperature
+175 °C
TX Incident C.W. Power
TX Peak Incident Power
50W (47 dBm)
@ 2010MHz
(Pin 16)
N/C
GND
TX
GND
(Pin 1)
GND
N/C
ANT
N/C
GND
N/C
N/C
DC2
N/C
GND
RX
GND
Pin Configuration:
(Center Metal Area is RF, D.C., and Thermal Ground)
Pin
Function
Pin
Function
1
GND
9
DC2
2
ANT
10
N/C
3
GND
11
N/C
4
N/C
12
N/C
5
N/C
13
GND
6
GND
14
TX
7
RX
15
GND
8
GND
16
N/C
Ordering Information
Part Number
Package
MASW-000834-13560T
Tape and Reel
MASW-000834-001SMB
Sample Board
MADR-008851-0001TB
Sample Board with recommended
external Driver & MASW-00083413560T Switch
3
>300 W, 5us, 1% duty
1. Exceeding these limits may cause permanent damage.
2. M/A-COM Technology Solutions does not recommend sustained operation near
these survivability limits.
3. Baseplate Temperature must be controlled to a constant +25°C. See page 7 for
derating curve.
1
Rev. V8
Static Sensitivity
These devices are rated Class 1B Human Body.
Proper ESD control techniques should be used
when handling these devices.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Electrical Specifications at +25°C, Characteristic Impedance, 20mA / 5V, Z0 = 50 Ω
Parameter
Symbol
20mA / 5V Conditions
Units
Min.
Typ.
Max.
Insertion Loss, RX
RX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
0.34
0.56
Insertion Loss, TX
TX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
0.26
0.445
Isolation, ANT To RX
RX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
45.8
52.1
—
Isolation, ANT To TX
TX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
21.7
27.1
—
Insertion Loss, RX
RX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
0.40
0.72
Insertion Loss, TX
Tx
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
0.32
0.49
Isolation, ANT To RX
Rx
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
43.7
48.9
—
Isolation, ANT To TX
TX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
18.4
21.4
Insertion Loss, RX
RX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
0.42
0.75
Insertion Loss, TX
TX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
0.33
0.5
Isolation, ANT To RX
RX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
43.2
44.6
—
Isolation, ANT To TX
TX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
17.7
19.9
—
Input Return Loss, TX
TX
RL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
32.1
—
Input Return Loss, RX
RX
RL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
24.2
—
F = 900 MHz
F = 1800 MHz
F = 2010 MHz
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Electrical Specifications at +25°C, Characteristic Impedance, 20mA / 5V, Z0 = 50 Ω
Parameter
Symbol
20mA / 5V Conditions
Units
Min.
Typ.
Max.
Insertion Loss, RX
RX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
0.46
0.84
Insertion Loss, TX
TX
IL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
0.35
0.525
RX
ISO
TX
ISO
TX
RL
RX
RL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
40.2
41.2
—
dB
16.2
18.6
—
dB
—
30.5
—
dB
—
22.9
—
RX
IL
TX
IL
RX
ISO
TX
ISO
TX
RL
RX
RL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
0.56
1.0
dB
—
0.38
0.575
dB
33.7
35.9
—
dB
13.6
16.1
—
dB
—
27.4
—
dB
—
21.9
—
RX
IL
TX
IL
RX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
0.78
—
dB
—
0.52
—
dB
—
26.4
—
Isolation, ANT To TX
TX
ISO
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
11.8
—
Input Return Loss, TX
TX
RL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
20.3
Input Return Loss, RX
RX
RL
See Bias Table 1, pg. 10,
Pinc= 0 dBm
dB
—
24.2
F = 2.3-2.7 GHz
Isolation, ANT To RX
Isolation, ANT To TX
Input Return Loss, TX
Input Return Loss, RX
F = 3.3-3.8 GHz
Insertion Loss, RX
Insertion Loss, TX
Isolation, ANT To RX
Isolation, ANT To TX
Input Return Loss, TX
Input Return Loss, RX
F = 4.9-5.9 GHz
Insertion Loss, RX
Insertion Loss, TX
Isolation, ANT To RX
—
—
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω
Parameter
Symbol
50mA / 25V Conditions
RX
IL
TX
IL
RX
ISO
TX
ISO
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
RX
IL
TX
IL
RX
ISO
TX
ISO
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
RX
IL
TX
IL
RX
ISO
TX
ISO
TX
RL
RX
RL
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
Units
Min.
Typ.
Max.
dB
—
0.27
—
dB
—
0.22
—
dB
—
53.3
—
dB
—
27.4
—
dB
—
0.32
—
dB
—
0.27
—
dB
—
50.2
—
dB
—
21.6
—
dB
—
0.34
—
dB
—
0.28
—
dB
—
45.5
—
dB
—
20.1
—
dB
—
33.1
—
dB
—
24.1
—
F = 900 MHz
Insertion Loss, RX
Insertion Loss, TX
Isolation, ANT To RX
Isolation, ANT To TX
F = 1800 MHz
Insertion Loss, RX
Insertion Loss, TX
Isolation, ANT To RX
Isolation, ANT To TX
F = 2010 MHz
Insertion Loss, RX
Insertion Loss, TX
Isolation, ANT To RX
Isolation, ANT To TX
Input Return Loss, TX
Input Return Loss, RX
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω
Parameter
Symbol
50mA / 25V Conditions
RX
IL
TX
IL
RX
ISO
TX
ISO
TX
RL
RX
RL
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
RX
IL
TX
IL
RX
ISO
TX
ISO
TX
RL
RX
RL
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
RX
IL
TX
IL
RX
ISO
TX
ISO
TX
RL
RX
RL
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
See Bias Table 2, pg. 10,
Pinc= 0 dBm
Units
Min.
Typ.
Max.
dB
—
0.38
—
dB
—
0.30
—
dB
—
41.8
—
dB
—
18.7
—
dB
—
31.3
—
dB
—
22.8
—
dB
—
0.47
—
dB
—
0.33
—
dB
—
36.2
—
dB
—
16.2
—
dB
—
28.0
—
dB
—
21.8
—
dB
—
0.72
—
dB
—
0.48
—
dB
—
26.6
—
dB
—
11.8
—
dB
—
20.5
—
dB
—
24.2
—
F = 2.3-2.7 GHz
Insertion Loss, RX
Insertion Loss, TX
Isolation, ANT To RX
Isolation, ANT To TX
Input Return Loss, TX
Input Return Loss, RX
F = 3.3-3.8 GHz
Insertion Loss, RX
Insertion Loss, TX
Isolation, ANT To RX
Isolation, ANT To TX
Input Return Loss, TX
Input Return Loss, RX
F = 4.9-5.9 GHz
Insertion Loss, RX
Insertion Loss, TX
Isolation, ANT To RX
Isolation, ANT To TX
Input Return Loss, TX
Input Return Loss, RX
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω
Parameter
Symbol
TX Input P1dB 3
TX
P1dB
TX
2Fo
TX
3Fo
TX
IIP3
TX
Pinc
TX 2nd Harmonic
TX 3rd Harmonic
TX Input Third Order
Intercept Point
TX C.W. Input Power
3
50mA / 25V Conditions
Units
Min.
Typ.
Max.
2010 MHz, TX to Antenna
dBm
—
>45.5
—
2010 MHz, Pin = + 30 dBm
dBc
—
80
—
2010 MHz, Pin = + 30 dBm
dBc
—
95
—
Pi= +10dBm, F1 = 2010 MHz, F2 = 2020 MHz
dBm
—
>64
—
F = 2010 MHz
dBm
W
—
47
50
—
RX C.W. Input Power
RX
Pinc
F = 2010 MHz
dBm
W
—
41.5
14
—
TX RF Switching
Speed
tRF
F = 2010 MHz ( 10-90% RF Voltage)
1MHz Rep Rate in Modulating Mode
ns
—
200
—
Parameter
Symbol
50mA / 25V Conditions
Units
Min.
Typ.
Max.
3.5 GHz, TX to Antenna
dBm
—
>45
—
3.5 GHz, Pin = + 30 dBm
dBc
—
88
—
3.5 GHz, Pin = + 30 dBm
dBc
—
105
—
Pi= +10dBm, F1 = 3.500 GHz, F2 = 3.510 GHz
dBm
—
>64
—
TX Input P1dB
TX 2nd Harmonic
TX 3rd Harmonic
TX Input Third Order
Intercept Point
TX
P1dB
TX
2Fo
TX
3Fo
TX
IIP3
RX C.W. Input Power
RX
Pinc
F = 3.5 GHz
dBm
W
—
40.5
11
—
TX RF Switching
Speed
tRF
F = 3.5 GHz ( 10-90% RF Voltage)
1MHz Rep Rate in Modulating Mode
ns
—
200
—
6
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Electrical Specifications at +25°C, Characteristic Impedance, 50mA / 25V, Z0 = 50 Ω
Power Derating Curve, Tx Maximum C.W. Input Power
(50mA Forward Bias, 2010 MHz)
Maximum C.W. Input Power (Watts )
55
50
45
40
35
30
25
45
65
85
Baseplate Temperature (Degrees C)
Note that this part must be held to a constant baseplate temperature to achieve the power handling results
specified above. Adding a heatsink to the baseplate will improve performance to values greater than shown
here. The increase in maximum input power from using a heatsink depends on the specific heatsink design.
With a sample board mounted onto a heatsink of dimensions and fins shown below, this switch can handle up
to 35 Watts C.W. of incident power.
7
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
TX Performance Curves at +25°C, Characteristic Impedance, Z0 = 50 Ω
8
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
RX Performance Curves at +25°C, Characteristic Impedance, Z0 = 50 Ω
9
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
Bias Diagrams & Tables
TX-ANT Insertion Loss
RX-ANT Isolation
RX-ANT Insertion Loss
TX-ANT Isolation
(Pin 16)
(Pin 16)
N/C
GND
TX
N/C
GND
GND
GND
20mA / 50mA
GND
N/C
GND
+
(Pin 1)
(Pin 1)
TX
N/C
5V / 25V
-
ANT
5V / 25V
GND
+
N/C
ANT
N/C
GND
N/C
DC2
GND
Bias Table 1
TX-ANT Insertion Loss
RX-ANT Isolation
RX-ANT Insertion Loss
TX-ANT Isolation
Bias Table 2
TX-ANT Insertion Loss
RX-ANT Isolation
RX-ANT Insertion Loss
TX-ANT Isolation
RX
N/C
20mA / 50mA
20mA / 50mA
N/C
N/C
N/C
N/C
GND
GND
-
RX
5V / 25V
+
DC2
GND
TX
RX
DC2
ANT
Pin 14
Pin 7
Pin 9
Pin 2
-20 mA
+5V, 0 mA
-20 mA
0V
+5V, 0 mA
-20 mA
+5V, 0 mA
0V
TX
RX
DC2
ANT
Pin 14
Pin 7
Pin 9
Pin 2
-50 mA
+25V, 0 mA
-50 mA
0V
+25V, 0 mA
-50 mA
+25V, 0 mA
0V
*Note - Diode Based Products require different minimum reverse bias voltages depending on the
frequency and incident power levels. More details can be found on page 11 of this datasheet.
10
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
MASW-000834 Minimum Required Reverse Bias Voltage
Minimum reverse bias voltage on a PIN diode based product varies with frequency of operation and incident power levels. As a rule of thumb, a designer can always use the magnitude of the peak RF voltage or
empirically locate lower bias values than the peak RF voltage magnitude. However, it has been shown that
lower DC voltages can be used depending on the RF environment in which a diode is placed. In the plot
below, the minimum required reverse voltage vs. frequency is shown for an incident RF power of 50 Watts.
This trend line will shift lower if the incident RF power is decreased. The biasing values have not been
verified through measurement at M/A-COM Technology Solutions. As a result, please use the data below
as a guide only for biasing requirements as this data is based solely on generic PIN diode equations.4
Please be cautious in that lower reverse bias levels can degrade isolation and distortion in a PIN diode
based product.
Reverse Bias Required vs. Frequency (For 50 Watt Power Handling)
80
70
Reverse Bias Voltage (V)
60
50
40
30
20
10
0
0
500
1000
1500
2000
Frequency (MHz)
4.
R. Caverly and G. Hiller, “Establishing the Minimum Reverse Bias for a P-I-N Diode in a High Power Switch,”
IEEE Transactions on Microwave Theory and Techniques, Vol.38, No.12, December 1990
11
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
MASW-000834 and Recommended Driver with +5V & +28V DC Power5,6,7,8,9,10,11,12
ANT
MADR-008851 is the recommended driver for the
MASW-000834 Switch.
C3
27 pF
100V
R1
See Note 9
L1
27 nH
Link to MADR-008851 Datasheet
+5V
C4
1000 pF
TX Voltage
C5
0.022 uF
RX Voltage
TX
RX
C1
27 pF
100V
C2
27 pF
100V
SPDT
L2
27 nH
+28V
L3
27 nH
C8
20 pF
Note 11
+5V
C6
12 pF
C7
12 pF
L4
27 nH
SH Current
TX
RX
Logic
Input
C1
SH2
MADR-008851-000100
Switch Driver
R2
See Note 10
SH1
Ground
Forward Bias Diode Voltage: ΔVf is ~0.9V @ 22 mA; ΔVf is ~1.0V @ 35 mA
R1 is calculated by (Vcc-1.5V)/Iseries, where Iseries is the desired bias current for the series diodes. For 21 mA load current, R1 = 165 Ω @
VCC = 5.0V and 82 Ω @ VCC = 3.3V. For 32 mA load current, R1 = 110 Ω @ VCC = 5.0V and 56 Ω @ VCC= 3.3V.
7. R2 is calculated by (Vdd-1V)/Ishunt, where Ishunt is the desired forward bias current for the shunt diode. The power dissipation is calculated
by Ishunt x 27V. For 20 mA of Ishunt, R2 should use a 2511, 1W, 1.3k ohm resistor.
8. C8 is already built-in for M/A-COM MASW-000834-13560T switch.
9. The voltage at the common anode will be approximately 1.5V.
10. The current in through the back-biased diodes will be the leakage current for the diodes
11. C1-C5, L1-L4, R1, R2, and the switch are discrete components that should be installed on the user’s board. It is recommended that
Coilcraft 0603CS-27NXJLW or equivalent be used for L1-L4 at 2 GHz (values may vary based on the frequency).
12. There are 33 pF bypass capacitors included in the driver for the RX, TX, and SH1 ports. There are cases, especially at higher frequencies, where the optional 12 pF bypass capacitors (C6 and C7) that are shown on the schematic are needed.
5.
6.
12
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASW-000834-13560T
HMICTM PIN Diode SPDT 50 Watt Switch for
0.05 - 6.0 GHz Higher Power Applications
Rev. V8
MASW-000834-13560T Outline – 4mm PQFN 16-Lead Saw Singulated
†
Reference Application Note S2083 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
13
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• China Tel: +86.21.2407.1588
• India Tel: +91.80.43537383
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.