CTR Series • Ratings 25A per phase @ 600 VAC • DIN-RAIL or Panel Mount 90mm (width) package • UL 508 Endurance Rating for Enhanced Reliability • SCR output for heavy industrial loads • Overvoltage Protection Built In (Internal TVS) • LED input status indicator • AC or DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output • UL Recognized, CE, RoHS and EMC Compliant PRODUCT SELECTION Description 4-32 VDC Control 90-140 VAC Control 180-280 VAC Control 25 A CTRD6025 CTRB6025 CTRC6025 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [VRMS] Transient Overvoltage [Vpk] Maximum Load Current (2) [Arms] Minimum Load Current [Arms] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum Surge Current (50/60 Hz, 1 cycle) [Apk] Maximum I²t for Fusing (50/60 HZ, 1/2 cycle) [A² sec] UL/IEC 60947 Motor Control Rating @ 240V [HP/KW] (4) UL/IEC 60947 Motor Control Rating @ 380V [HP/KW] (4) UL/IEC 60947 Motor Control Rating @ 480V [HP/KW] (4) Minimum Power Factor (with Maximum Load) Min/Max stranded wire Min/Max solid wire CTRD6025 CTRB6025 CTRC6025 48-600 1100 25 0.1 0.25 500 1.35 286/300 410/374 1/0.74 2/1.48 3/2.22 0.5 16/8 AWG 16/10 AWG 48-600 1100 25 0.1 0.25 500 1.35 286/300 410/374 1/0.74 2/1.48 3/2.22 0.5 16/8 AWG 16/10 AWG 48-600 1100 25 0.1 0.25 500 1.35 286/300 410/374 1/0.74 2/1.48 3/2.22 0.5 16/8 AWG 16/10 AWG INPUT SPECIFICATIONS (1) Description CTRD6025 CTRB6025 CTRC6025 4.0-32 VDC 4.0 VDC 1.0 VDC 22 mA 28 mA 1/2 Cycle 1/2 Cycle 24/16 AWG 90-140 Vrms 90 Vrms 10 Vrms 15 mA 19 mA 20 30 24/16 AWG 180-280 Vrms 180 Vrms 10 Vrms 19 mA 24 mA 20 30 24/16 AWG CTRD6025 CTRB6025 CTRC6025 4000Vrms 4000Vrms 4000Vrms 109 Ohms 109 Ohms 109 Ohms 8 pF -20ºC to 80ºC -40ºC to 100ºC Green LED 21.2 oz. (600g) Box Clamp Type 5.0-6.0 in lb (0.6-0.7 Nm) 0.8 inch (20mm) 8 pF -20ºC to 80ºC -40ºC to 100ºC Green LED 21.2 oz. (600g) Box Clamp Type 5.0-6.0 in lb (0.6-0.7 Nm) 0.8 inch (20mm) 8 pF -20ºC to 60ºC -40ºC to 100ºC Green LED 21.2 oz. (600g) Box Clamp Type 5.0-6.0 in lb (0.6-0.7 Nm) 0.8 inch (20mm) Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Minimum Input Current (5) Maximum Input Current (5) Maximum Turn-On Time [msec] (6) Maximum Turn-Off Time [msec] Min/Max stranded/solid wire GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range (7) Ambient Storage Temperature Range Status Indicator Display Weight (typical) Terminals Recommended Terminal Screw Torque Range: Min. Side by Side Spacing GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) See Derating Curves 3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 4) At 40°C Ambient temperature. 5) Turn-on time for DC control random turn-on versions is 0.02 msec 6) Input circuitry incorporates active current limiter. 7) For 180-280 VAC Control. Maximum Ambient operating temperature is 60°C MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E79183 Rev. 082712 EMC Compatibility IEC 62314 IEC 60068-2-6 35mm/10-55Hz IEC 60068-2-27 15G / 11ms IEC 61000-4-2 Level 3 Electrostatic Discharge IEC 61000-4-3 Level 3 Radiated Electromagnetic Noise IEC 61000-4-4 Level 3 Immunity to Electrically Fast Transients IEC 61000-4-5 Level 3 Immunity to Electrical Surges IEC 61000-4-6 Level 3 Conducted Electromagnetic Noise CISPR 11 Class A Conducted and Radiated Noise for Industrial Environments Pollution Degree 2 Overvoltage Category III ANNEX - ENVIROMENTAL INFORMATION