CRYDOM B53TP25C_12

53TP Series IP20
• Three-phase solid-state relay; Ratings 25A , 50A per phase @ 48-530 VAC
• 2 package styles IP20 or IP00 (See IP00 spec sheet for more information)
• SCR output for heavy industrial loads
• AC or DC control
• Zero-crossing (resistive loads) or random-fire (inductive loads) output
• LED input status indicator
• Transient protection built in
PRODUCT SELECTION
Control Voltage
90-140 VAC
180-280 VAC
4-32 VDC
18-36 VAC
25A
50A
B53TP25C
C53TP25C
D53TP25C
E53TP25C
B53TP50C
C53TP50C
D53TP50C
E53TP50C
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms]
Transient Overvoltage [Vpk]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2)
Maximum Load Current per phase [Arms] (3)
Minimum Load Current per phase [Arms]
Maximum 1 Cycle Surge Current (50/60Hz) [Apk]
Maximum 1 Second Surge Current 50/60 Hz [Apk]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Thermal Resistance Junction to Case (Rjc) [°C/W]
Maximum 1/2 Cycle I²t for Fusing (50/60 Hz) [A² sec]
Minimum Power Factor (with Maximum Load)
UL/IEC 60947 Motor Control Ratings at 120V [HP/KW] (4)
UL/IEC 60947 Motor Control Ratings at 240V [HP/KW] (4)
UL/IEC 60947 Motor Control Ratings at 380V [HP/KW] (4)
UL/IEC 60947 Motor Control Ratings at 480V [HP/KW] (4)
25 A
50 A
48-530
1200
3
500
25
0.1
275-300
85
1.35
0.24
380-370
0.5
0.75/0.56
1/0.74
2/1.48
3/2.22
48-530
1200
3
500
50
0.1
710-750
150
1.35
0.12
2520-2320
0.5
1.5/1.11
3/2.22
5/3.7
7.5/5.55
INPUT SPECIFICATIONS (1)
Description
Control Voltage Range
Minimum Turn-On Voltage
Minimum Turn-Off Voltage
Minimum Input Current (for on-state)
Maximum Input Current
Nominal Input Impedance
Maximum Turn-On Time [msec] (5)
Maximum Turn-Off Time [msec]
D53
B53
C53
E53
4-32 VDC
4.0 VDC
1.0 VDC
24 mA
35 mA
Current Regulated
8.33
8.33
90-140 VAC
90
10
7.0 mA
16 mA
Current Regulated
20
30
180-280 VAC (6)
180
10
7.0 mA
20 mA
Current Regulated
20
30
18-36 VAC
18
2
15 mA
20 mA
Current Regulated
20
30
GENERAL SPECIFICATIONS
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Encapsulation
Terminals
Input Terminal Screw Torque Range:[in lbs/Nm]
Output Terminal Screw Torque Range:[in lbs/Nm]
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Heat sinking required, see page 3 for derating curves.
4) At 40°C Ambient temperature.
5) Turn-on time for Random turn-on versions is 0.02 msec (DC Control Models)
6) For Operating temperatures above +60°C maximum control voltage is 260 VAC.
MECHANICAL SPECIFICATIONS
Parameters
4000 Vrms
109 Ohm
8 pF
-40 to 80°C
-40 to 125 °C
12.7 oz (360g)
NA
Hardware Furnished, mounted
8-10 / 0.9-1.1
15-20 / 1.7-2.2
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
EN60950 : Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7:
IEC 62314
IEC 60068-2-6 35mm / 10-55Hz
IEC 60068-2-27 15G / 11ms
IEC 1000-4-2 : Electrostatic Discharge – Level 3
IEC 1000-4-3 : Radiated Electromagnetic Noise – Level 3
IEC 1000-4-4 : Electrically Fast Transients – Level 3
IEC 1000-4-5 : Electrical Surges – Level 3
IEC 1000-4-6 : Conducted Electromagnetic Noise – Level 3
E79183
Rev 101112
ANNEX - ENVIROMENTAL INFORMATION