SeriesOne DR Series • Rating 3 Amps • Load voltage ratings of 24-280VAC, 48-600VAC, 1-60VDC and 1-100VDC • Fits standard 35mm DIN Rail • LED input status indicator • AC or DC control • Zero-crossing (resistive loads) or random turn-on (inductive loads) output • UL and cUL Listed, HP Rated, CE & RoHS Compliant • UL 508 Endurance Rating for Enhanced Reliability PRODUCT SELECTION Description 4-32 VDC Control 90-140 VAC Control 200-265 VAC Control 18-36 VAC Control 280V, 3A 600V, 3A 60V, 3A 100V, 3A DR24D03 DR24B03 DR24A03 DR24E03 DR48D03 DR06D03 DR10D03 DR24x03 DR48x03 DR06D03 DR10D03 24-280 Vrms 600 3 Arms 0.15 0.1 500 1.3 285/300 410/375 1/4 (0.18) 1/2 (.37) 1/2 (.37) 0.5 22/14 AWG 22/14 AWG 1.76 oz. (50g) 48-600 Vrms 1200 3 Arms 0.15 Arms 0.1 500 1.3 285/300 410/375 1/4 (0.18) 1/3 (.25) 1/2 (.37) 0.5 22/14 AWG 22/14 AWG 1.76 oz. (50g) 1-60 VDC NA 3 2.5 mA 0.1 NA 0.6 60 NA NA NA NA NA 22/14 AWG 22/14 AWG 1.76 oz. (50g) 1-100 VDC NA 3 2.5 mA 0.1 NA 0.6 60 NA NA NA NA NA 22/14 AWG 22/14 AWG 1.76 oz. (50g) AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (2) Transient Overvoltage [Vpk] Maximum Load Current, resistive (2A) Minimum Load Current Maximum Off-State Leakage Current @ Rated Voltage [mA] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum Surge Current (50/60 Hz, 1 cycle) [Apk] Maximum I²t for Fusing (50/60 HZ, 1/2 cycle) [A² sec] HP Rating UL 508/IEC60947[HP (KW)] @ 240V HP Rating UL 508/IEC60947[HP (KW)] @ 380V HP Rating UL 508/IEC60947[HP (KW)] @ 480V Minimum Power Factor (with Maximum Load) Min/Max stranded wire Min/Max solid wire Weight (typical) INPUT SPECIFICATIONS (1) Description DRxxDxx DRxxBxx DRxxAxx DRxxExx Control Voltage Range (4) Minimum Turn-On Voltage Minimum Turn-Off Voltage Minimum Input Current [mA] (5) Maximum Input Current [mA] (5) Maximum Turn-On Time (6) (7) Maximum Turn-Off Time (8) Min/Max stranded/solid wire 4.0-32 VDC 4.0 VDC 1.0 VDC 9 11 1/2 Cycle 1/2 Cycle 22/16 AWG 90-140 Vrms 90 Vrms 10 Vrms 3 5 20 msec 30 msec 22/16 AWG 200-265 Vrms 200 Vrms 90 Vrms 2.5 3.3 20 msec 30 msec 22/16 AWG 18-36 Vrms 18 Vrms 4 Vrms 3.5 8 20 msec 30 msec 22/16 AWG GENERAL SPECIFICATIONS (1) Description Dielectric Strength, Input to Output (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Recommended Terminal Screw Torque Range: Parameters 4000Vrms (9) 109 Ohms 10 pF -30ºC to 80ºC -30ºC to 100ºC 4.4-7.0 in lb (0.5-0.8 Nm) GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) See Derating Curves 2A) For AC output frequency is 47-63Hz 3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 4) DC control includes reverse polarity protection. 5) Input circuitry incorporates active current limiter. 6) Turn-on time for DC control random turn-on versions is 0.1 msec 7) Turn-on time for DC output 600µsec 8) Turn-off time for DC output 300µsec 9) 2500 Vrms for DC output Standards of Compliance IEC 62314 LC A, Resistive or Slightly Inductive Load Ratings: 3A @ 40°C ambient for DR24x03, 3A @ 40°C ambient for DR48x03 LC B, Motor Loads Ratings: 0.18KW @ 240VAC for DR24x03 and 0.375KW @ 480VAC DR48x03 Shock and Vibration (Applies to all part numbers) Vibration Resistance according to IEC 60068-2-6: 0.35mm and 0.75mm Amplitude over 10-55 Hz Shock Resistance according to IEC 60068-2-27: 15g/11ms EMC (Applies to all part numbers) IEC 61000-4-2 : Electrostatic Discharge – Level 3 IEC 61000-4-4 : Electrically Fast Transients – Level 3 IEC 61000-4-5 : Electrical Surges – Level 3 MECHANICAL SPECIFICATIONS WIRING DIAGRAM THERMAL DERATE INFORMATION AGENCY APPROVALS E116949 Rev 030813 ACCESSORIES