Optoway SPM-4100RWG 1 ********************************************************************************************************************************************************************* SPM-4100RWG / SPM-4100BRWG / SPM-4100ARWG (RoHS Compliant) 6.144 Gbps / 850 nm Digital Diagnostic Multi-Rate CPRI MM SFP+ ******************************************************************************************************************************************************************** FEATURES DESCRIPTION l l l l The SPM-4100RWG series is a 1 to 6.25 Gb/s multi-mode transceiver module for serial optical communication applications for a radio base station system. It is with the SFP+ 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm. The transmitter section uses a Vertical Cavity Surface Emitted Laser (VCSEL) and is a Class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated GaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. CPRI / OBSAI Compatible Optical Interface 1 G to 6.25 G Multi-rate Specification Compliant to SFP+ MSA Link Distance -- 300 m links with OM3 MMF Cables -- 82 m links with OM2 MMF Cables -- 33 m links with OM1 MMF Cables l SFF-8472 Digital Diagnostic Function l AC/AC Coupling according to MSA l Single +3.3 V Power Supply l RoHS 6/6 Compliant l 0 to 70oC Operating: SPM-4100RWG l -10 to 85oC Operating: SPM-4100BRWG l -40 to 85oC Operating: SPM-4100ARWG l Class 1 Laser International Safety Standard IEC 60825 Compliant LASER SAFETY This multi-mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l Radio Base Station l OBSAI rates 6.144 Gb/s, 3.072 Gb/s, and 1.563 Gb/s l CPRI rates 4.9152 Gb/s, 2.4576 Gb/s, and 1.2288 Gb/s ORDER INFORMATION P/No. SPM-4100RWG SPM-4100BRWG SPM-4100ARWG Bit Rate (Gb/s) Distance (m) Wavelength (nm) Package Temp. (oC) RoHS Compliant 1 to 6.25 300 / 82 / 33* 850 VCSEL SFP+ with DMI 0 to 70 Yes 1 to 6.25 300 / 82 / 33* 850 VCSEL SFP+ with DMI -10 to 85 Yes 1 to 6.25 300 / 82 / 33* 850 VCSEL SFP+ with DMI -40 to 85 Yes *: 300m for OM3 MMF, 82m for OM2 MMF, and 33 m for OM1 MMF. Absolute Maximum Ratings Parameter Storage Temperature Operating Case Temperature Symbol Tstg Topr Operating Relative Humidity Power Supply Voltage RH Vcc Min -40 0 -10 -40 5 0 Max 85 70 85 85 95 4 Units o C o C Min 3.14 0 -10 -40 Typ 3.3 Max 3.46 70 85 85 180 6.25 % V Notes SPM-4100RWG SPM-4100BRWG SPM-4100ARWG Non condensing Recommended Operating Conditions Parameter Power Supply Voltage Operating Case Temperature Power Supply Current Data Rate Symbol Vcc Topr ICC (TX+RX) 135 1 Units / Notes V o C / SPM-4100RWG o C / SPM-4100BRWG o C / SPM-4100ARWG mA Gb/s ********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2010/9/1 V2.0 Optoway SPM-4100RWG 2 *********************************************************************************************************************************************************************** Transmitter Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Average Launch Power Optical Modulation Amplitude Extinction Ratio Output Center Wavelength Output Spectrum Width Average Launch Power of TX Off Relative Intensity Noise Symbol Po, Avg Po, OMA ER λc σλ Min -8.2 -5.2 3.0 840 Typ Max -1 860 0.65 -30 -128 RIN Units dBm dBm dB nm nm dBm dB/Hz Notes 1 RMS (σ) 1. Output power is power coupled into a 50/125 µm multi-mode fiber. Receiver Optical Specifications (0 oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Sensitivity Receiver Overload LOS -- Deasserted LOS -- Asserted Wavelength of Operation Optical Return Loss Symbol Sens P MAX LOSD LOSA λc ORL Min Typ -1.0 ---25 840 ------- Max -12 -14 --860 -12 Units dBm dBm dBm dBm nm dB Max Units 6.25 700 Gb/s Ω mVpp Gb/s Ω mVpp Vcc+0.3 0.8 Vcc 0.5 V V V V Notes 2, average power Transition: low to high Transition: high to low 2. A valid 8B/10Bencoded input is required for receiver sensitivity specification. Electrical Characteristics Parameter Symbol High-Speed Signal (CML) Interface Specification Input Data Rate Differential Input Impedance Rin Differential Data Input Amplitude Output Data Rate Differential Output Impedance Rout Differential Data Output Amplitude Low-Speed Signal (LVTTL) Interface Specification Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Min Typ 1 100 150 1 350 2.0 GND 2.4 GND 700 6.25 100 600 Notes Internally AC coupled Internally AC coupled LINK LENGTH Data Rate / Standard 6.144 Gb/s Fiber Type 62.5/125 µm MMF 62.5/125 µm MMF 50 / 125 µm MMF 50 / 125 µm MMF 50 / 125 µm MMF Model Bandwidth @ 850nm (MHz-km) 160 200 400 500 2000 Distance Range (m) 26 (FDDI-Graded) 33 (OM1) 66 82 (OM2) 300 (OM3) ********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2010/9/1 V2.0 Optoway SPM-4100RWG 3 *********************************************************************************************************************************************************************** CONNECTION DIAGRAM PIN Signal Name 1 2 VEET TX_Fault 3 TX_Disable 4 SDA 5 SDL 6 MOD-ABS 7 RS0 8 9 RX_LOS RS1 10 VEER Description PIN Signal Name Transmitter Signal Ground Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation Logic “1” Input (or no connection) = TX off, Logic “0” = TX on. Modulation Definition 2 – Two wires serial ID Interface Modulation Definition 1 – Two wires serial ID Interface Modulation Absent, connected to VEET or VEER in the module. RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Loss of Signal Out (OC). TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance. Receiver Signal Ground Description 11 12 VEER RD- Receiver Signal Ground Inverse Receiver Data Out 13 RD+ Receiver Data Out 14 VEER Receiver Signal Ground 15 VCCR Receiver Power – 3.3V±5% 16 VCCT Transmitter Power – 3.3V±5% 17 VEET Transmitter Signal Ground 18 19 TD+ TD- Transmitter Data In Inverse Transmitter Data In 20 VEET Transmitter Signal Ground MODULE DEFINITION Module Definition 4 PIN 4 SDA PIN 5 SCL PIN 6 MOD-ABS Interpretation by Host Serial module definition protocol Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components. ********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2010/9/1 V2.0 Optoway SPM-4100RWG 4 *********************************************************************************************************************************************************************** RECOMMENDED CIRCUIT SCHEMATIC Vee T Tx_DISABLE Tx_FAULT (1,17,20) 3 Tx_DISABLE 2 Tx_FAULT 10 KΩ LD Driver TD + 18 TD - 19 TD + Z=50Ω 100Ω TD Z=50Ω Vcc T 4 .7 μH 16 Vcc 3.3V 0.1μF 22 μF 0.1μF SerDes IC 0.1μF Vcc R 15 0.1μF RD - 22 μF Protocol IC 4 .7 μH 12 RD Z=50Ω 100Ω POST Amp RD + 13 RD + Z=50Ω de pending on SERDES 10 KΩ LOS Vee R 30KΩ 8 RS1 9 RS0 7 30KΩ MOD_ABS EEPROM SCL SDA LOSS OF SINGAL (10,11,14) TX Rate Select RX Rate Select 6 MODULE DETECT 5 SCL 4 SDA 10 KΩ SFP+ module 10 KΩ 10 KΩ Vcc 3.3V PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice. ********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2010/9/1 V2.0 Optoway SPM-4100RWG 5 *********************************************************************************************************************************************************************** REVISION HISTORY Version 1.0 2.0 Subject Initial datasheet Extend data rate from 1 Gb/s to 6.25Gb/s Release Date 2009/7/1 2010/9/1 ********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 2010/9/1 V2.0