Microwave Amplifier 2000 to 8000 MHz Model BXHF1056 FEATURES • Output Power @ 1dB Comp.: +20 dBm • Reverse Bias Protection • Input Voltage Regulator • Laser Sealed Housing • Input RF Surge Protection The Model BXHF1056 is standard high frequency amplifier covering 2000 MHz to 8000 MHz. This single stage design, utilizes an input voltage regulator to protect against fluctuations in supply voltage, reverse bias protection circuitry, and a laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version as a model SXHF1056. All specification ratings are based on measurements in a 50 ohm system with a DC supply voltage tolerance of +/- 2%. Parameter Typical Min. / Max. Frequency Range Gain Pout @ 1 dB Compression 2000 to 8000 MHz 7.5 dB +20 dBm 2000 to 8000 MHz 6.5 dB +19 dBm Input VSWR Output VSWR 1.5:1 1.5:1 2.0:1 Max. 2.0:1 Max. 3rd Order Output Intercept Point 2nd Order Output Intercept Point +30 dBm +40 dBm - Noise Figure 5.0 dB 6.0 dB Supply Voltage Supply Current +12 to 15 volts 110 mA +12 to +15 volts 125 mA Max. Revision: 12/4/2013 Housing Size RF Connectors Operating Case Temp. (Min./Max. Values) Typical values are measured at 25°C but not guaranteed. 1.060" L x 0.870" W x 0.360" H Gold Plated Pins or SMA Female -20°C to +70°C Maximum (No Damage) Ratings Storage Temperature Operating Temperature (Case) DC Voltage @ 25°C Input Drive @ 25°C (CW) -65°C to +125°C -40°C to +85°C +17 VDC +20 dBm Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com Microwave Amplifier 2000 to 8000 MHz Model BXHF1056 Outline Drawing (HF1 Package) Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com