Microwave Amplifier 2 GHz to 10 GHz Model BXHF1064 FEATURES • Output Power @ 1dB Comp.: +20 dBm • Reverse Bias Protection • Input RF Surge Protection • Input Voltage Regulator • Laser Sealed Housing The Model BXHF1064 is standard high frequency amplifier covering 2 GHz to 10 GHz. This two stage design, utilizes input RF surge protection to protect against power fluctuations on incoming signal, reverse bias protection circuitry, and a laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MILSTD-883 version as a model SXHF1064. All specification ratings are based on measurements in a 50 ohm system with a DC supply voltage tolerance of +/- 2%. Parameter Typical Min. / Max. Frequency Range Gain Pout @ 1 dB Compression 2 GHz to 10 GHz 15 dB +20 dBm 2 GHz to 10 GHz 14 dB +19 dBm Input VSWR Output VSWR 1.5:1 1.5:1 2.0:1 Max. 2.0:1 Max. 3rd Order Output Intercept Point 2nd Order Output Intercept Point +30 dBm +40 dBm - Noise Figure Supply Voltage Supply Current 4.0 dB +12 to +15 volts 200 mA 5.0 dB +12 to +15 volts 215 mA Max. Revision: 12/16/2013 Housing Size RF Connectors Operating Case Temp. (Min./Max. Values) Typical values are measured at 25°C but not guaranteed. 1.060” L x 0.870” W x 0.300” H Gold Plated Pins or SMA Female -20°C to +70°C Maximum (No Damage) Ratings Storage Temperature Operating Temperature (Case) DC Voltage @ 25°C Input Drive @ 25°C (CW) -65°C to +125°C -40°C to +85°C +17 VDC +20 dBm Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com Microwave Amplifier 2 GHz to 10 GHz Model BXHF1064 Outline Drawing (HF1 Package) Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com