Microwave Amplifier 4000 to 8000 MHz Model BXHF 1060 FEATURES • Output Power @ 1dB Comp.: +20 dBm • Reverse Bias Protection • Input Voltage Regulator • Laser Sealed Housing • Input RF Surge Protection The Model BXHF1060 is standard high frequency amplifier covering 4000 MHz to 8000 MHz. This three stage design, utilizes an input voltage regulator to protect against fluctuations in supply voltage, reverse bias protection circuitry, and a laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version as a model SXHF1060. All specification ratings are based on measurements in a 50 ohm system with a DC supply voltage tolerance of +/- 2%. Parameter Typical Min. / Max. Frequency Range Gain Pout @ 1 dB Compression 4000 to 8000 MHz 40 dB +20 dBm 4000 to 8000 MHz 39 dB +19 dBm Input VSWR Output VSWR 1.5:1 1.5:1 2.0:1 Max. 2.0:1 Max. 3rd Order Output Intercept Point 2nd Order Output Intercept Point +25 dBm +35 dBm - Noise Figure Supply Voltage Supply Current 1.8 dB +12 to +15 volts 220 mA 2.5 dB +12 to +15 volts 235 mA Max. Revision: 12/14/2012 Housing Size RF Connectors Operating Case Temp. (Min./Max. Values) Typical values are measured at 25°C but not guaranteed. 1.360" L x 0.660" W x 0.360" H Gold Plated Pins or SMA Female -20°C to +70°C Maximum (No Damage) Ratings Storage Temperature Operating Temperature (Case) DC Voltage @ 25°C Input Drive @ 25°C (CW) -65°C to +125°C -40°C to +85°C +17 VDC +20 dBm Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com Microwave Amplifier 4000 to 8000 MHz Model BXHF1060 Outline Drawing (QBA-2 Package) Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com