BP2500A1008AT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 2.5 X 2.0 X 0.7 mm, RoHS compliant. 2. Provide low insertion loss and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N BP2500A1008AT Specification Symbol Dimension (mm) 2.2dB at -40°C and +85°C L 2.50 ± 0.20 VSWR 2.0 max W 2.00 ± 0.20 Impedance 50 Ω T 0.70 ± 0.10 A, E 0.20 ± 0.20 B 0.55 ± 0.20 45dB @ 1570 - 1580MHz C 0.50 ± 0.20 45dB @ 1710 - 1785MHz D 0.20 ± 0.20 Frequency range Insertion Loss (max) 2400 - 2500 MHz 2.0 dB at 25°C 45dB @ 824 - 849MHz 45dB @ 869 - 880MHz 45dB @ 925 - 960MHz 40dB @ 1805 - 1850MHz Attenuation (min.) 35dB @ 1850 - 1910MHz 35dB @ 1920 - 1990MHz 25dB @ 2110 - 2170MHz 5 dB @ 2750 - 3000MHz 15 dB @ 3000 - 4800 MHz 30 dB @ 4800 - 5000 MHz 30 dB @ 5150 - 5850MHz 20 dB @7200 - 7500 MHz Operating temperature range -40°C to +85°C TERMINAL CONFIGURATION Frontier Electronics Corp.® http://www.frontierusa.com PIN Definition P1 Input P2 GND P3 Output P4 GND Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP2500A1008AT BAND PASS FILTER SPECIFICATION Rev. A PCB DESIGN/LAYOUT CONSIDERATION Note: - Unit in mm - Design trace width to be 50Ω impedance. Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989