BP2500B0603ET BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 1.6 X 0.8 X 0.6 mm, RoHS compliant. 2. Provide low insertion loss and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N BP2500B0603ET Specification Symbol Dimension (mm) 2.0 max L 1.60 ± 0.15 Impedance 50 Ω W 0.80 ± 0.15 T 0.60 ± 0.10 Attenuation (min.) 25 dB @ 695 - 800 MHz 20 dB @ 1910 MHz 35 dB @ 3200 MHz 20 dB @ 4800 - 5000 MHz 20 dB @ 7200 - 7500 MHz A 0.45 ± 0.15 B 0.70 ± 0.15 C, D 0.20 ± 0.10 E 0.25 ± 0.15 F 0.30 ± 0.15 Frequency range 2400 - 2500 MHz Insertion Loss (max) 3.0 dB max VSWR Operating temperature range -40°C to +85°C TERMINAL CONFIGURATION P1 P2 P3 P4 PIN Definition P1 Input P2 GND P3 Output P4 GND PCB DESIGN/LAYOUT CONSIDERATION Note: - Unit in mm - Design trace width to be 50Ω impedance. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP2500B0603ET BAND PASS FILTER SPECIFICATION Rev. A Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989