BP0862A1008AT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 2.5 X 2.0 X 0.8 mm, RoHS compliant. 2. Provide low insertion loss and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N BP0862A1008AT Specification Symbol Dimension (mm) 2.0 max L 2.50 ± 0.20 Impedance 50 Ω W 2.00 ± 0.20 30dB@ 90 - 108 MHz T 0.80 ± 0.10 Attenuation (min.) 10dB@ 245 MHz 30dB@ 1710 - 2170 MHz A, E 0.20 ± 0.20 Operating temperature range -40°C to +85°C B 0.55 ± 0.20 C 0.50 ± 0.20 D 0.20 ± 0.20 Frequency range 465 - 862 MHz Insertion Loss (max) 1.2 dB max VSWR TERMINAL CONFIGURATION PIN Definition P1 Input P2 GND P3 Output P4 GND PCB DESIGN/LAYOUT CONSIDERATION Note: - Unit in mm - Design trace width to be 50Ω impedance. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP0862A1008AT BAND PASS FILTER SPECIFICATION Rev. A Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989