BP2500A1008GT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 2.5 X 2.0 X 1.0 mm, RoHS compliant. 2. Provide low insertion loss and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N BP2500A1008GT Specification Symbol Dimension (mm) 2.0 max L 2.50 ± 0.20 50 Ω W 2.00 ± 0.20 40dB @ 900MHz T 1.00 ± 0.10 A, E 0.20 ± 0.20 B 0.55 ± 0.20 40dB @ 4800 MHz C 0.50 ± 0.20 25dB @ 7200 MHz (reference) D 0.25 ± 0.20 Frequency range 2400 - 2500 MHz Insertion Loss (max) 2.0 dB at +25°C VSWR Impedance 30dB @ 1990 MHz Attenuation (min.) Operating temperature range 20dB @ 2100 MHz 35dB @ 3200 MHz -40°C to +85°C TERMINAL CONFIGURATION PIN Definition P1 Input/Output P2 GND P3 Output/Input P4 GND PCB DESIGN/LAYOUT CONSIDERATION Note: - Design trace width to be 50Ω impedance. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP2500A1008GT BAND PASS FILTER SPECIFICATION Rev. A Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989