BP2500D0805DT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 2.0 X 1.2 X 0.8 mm, RoHS compliant. 2. Provide low insertion loss and high rejection rate. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N BP2500D0805DT Specification 2400 - 2500 MHz Frequency range 1.8 dB max at +25°C Insertion Loss (max) 2.0 dB max at -40°C to +85°C VSWR 2.0 max Impedance 50 Ω 30 dB @ 824-915MHz 30 dB @ 1545-1605MHz Symbol Dimension (mm) L 2.00 ± 0.15 25 dB @ 5150- 6000MHz W 1.25 ± 0.10 20 dB @ 7200-7450.5MHz -40°C to +85°C T 0.80 ± 0.10 A 0.95 ± 0.10 B 0.275 ± 0.10 C 0.25 ± 0.10 D 0.60 ± 0.10 E 0.175 ± 0.10 F 0.15 ± 0.10 35 dB @ 1710-1990MHz Attenuation (min.) 30 dB @ 2170MHz 30 dB @ 4800-4967MHz Operating temperature range TERMINAL CONFIGURATION P2 P3 PIN Definition P1 INPUT P2 GND P3 OUTPUT P1 Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP2500D0805DT BAND PASS FILTER SPECIFICATION Rev. A PCB DESIGN/LAYOUT CONSIDERATION Note: - Unit in mm - Design trace width to be 50Ω impedance. Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989