BP2500D0805FT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 2.0 X 1.2 X 0.4 mm, RoHS compliant. 2. Provide low insertion loss, high rejection rate, and low profile. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N BP2500D0805FT Specification Frequency range 2400 - 2500 MHz Insertion Loss (max) 2.5 dB max VSWR 2.0 max Impedance 50 Ω 25@ 746-764MHz 30@ 824-849MHz 26@ 869-960MHz Symbol Dimension (mm) L 2.00 ± 0.15 W 1.25 ± 0.10 30@ 2110-2170MHz T 0.45 ± 0.10 15@ 3300-3800MHz A 0.95 ± 0.10 35@ 4800-5000MHz B 0.275 ± 0.10 20@ 7200-7450.5MHz -40°C to +85°C C 0.25 ± 0.10 D 0.60 ± 0.10 E 0.175 ± 0.10 F 0.15 ± 0.10 28@ 1570-1580MHz 28@ 1710-1785MHz Attenuation (min.) 30@ 1850-1910MHz 30@ 1930-1990MHz Operating temperature range TERMINAL CONFIGURATION P2 P3 PIN Definition P1 INPUT P2 GND P3 OUTPUT P1 Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP2500D0805FT BAND PASS FILTER SPECIFICATION Rev. A PCB DESIGN/LAYOUT CONSIDERATION Note: - Unit in mm - Design trace width to be 50Ω impedance. Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989