BPF-3219 Ultra Slim, 19” Fanless Panel PC, VIA V4 Eden 1GHz CPU, Heavy Duty Touch Screen, 60W Adapter Copyright Disclaimers The accuracy of contents in this manual has passed through checking and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for any infringements of patents or other rights resulting from its use. The manufacturer will not be responsible for any direct, indirect, special, incidental or consequential damages arising from the use of this product or documentation, even if advised of the possibility of such damage(s). This manual is copyrighted and BOSER Technology Co., Ltd. reserves all documentation rights. Unauthorized reproduction, transmission, translation, and storage of any form and means (i.e., electronic, mechanical, photocopying, recording) of this document, in whole or partly, is prohibited, unless granted permission by BOSER Technology Co., Ltd. BOSER Technology Co., Ltd. reserves the right to change or modify the contents of this document without any notice. BOSER Technology Co., Ltd. assumes no responsibility for any errors or omissions that may appear in this manual, nor does it make any commitment to update the information contained herein. TTrraaddeem maarrkkss BOSER is a registered trademark of BOSER Technology Co., Ltd. ISB is a registered trademark of BOSER Technology Co., Ltd. Intel is a registered trademark of Intel Corporation. Award is a registered trademark of Award Software, Inc. AMI is a registered trademark of AMI Software, Inc. All other trademarks, products and or product names mentioned herein are mentioned for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies or owners. © Copyright 2008 BOSER Technology Co., Ltd. All Rights Reserved. Edition 1.0, June 20, 2008 Table of Contents Chapter 1 1.1 1.2 1.3 1.4 General Descripton ...................................1 Major Features ....................................................................... 2 Specifications ........................................................................ 2 Panel Specifications ............................................................. 3 Dimensions ............................................................................ 4 Chapter 2 Unpacking ..................................................5 2.1 Opening the Delivery Package............................................. 5 2.2 Inspection............................................................................... 5 Chapter 3 3.1 3.2 3.3 3.4 3.5 Hardware Installation ..............................7 Open the Cover...................................................................... 7 HDD/CD-ROM Installation..................................................... 8 SBC Installation ................................................................... 11 WLAN Module Installation .................................................. 12 Wallmount Installation ........................................................ 13 Chapter 4 Touch Screen Driver Installation ..........15 4.1 Resistive Type Touch Screen Driver Installation............. 15 4.2 SAW Type Touch Screen Driver Installation .................... 22 Safety Instructions The safety recommendations outlined in this section are to be read, understood and followed before operating the product. Keep this information in a safe place for future reference. Fail to comply with any of the following safety procedures could result in serious damage. Do not operate product for any purposes other than its intended use This product is intended for indoor use only Do not operate product if power cord is damaged in anyway Do not insert objects into openings Do not immerse product in water or permit liquids to spill inside Turn off power when unattended or not in use. Unplug product before moving it or when it is not in use for an extended period of time. The socket-outlet shall be installed near the equipment and shall be easily accessible Do not alter or extend electric plug. Plug is configured for appropriate electrical supply Do not overload electrical outlets beyond their capacity as this can result in a fire NOTE: DO NOT TOUCH THE PRODUCT OR ANY OTHER SENSITIVE COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC PROTECTIONS. Life Expectancy of Constituent Parts This section describes the life expectancy of constituent parts (backlight, power supply, internal cooling fan and touch screen) which make up to BPF-3219. TFT Display Backlight Display brightness decreases over time with use. The expected operating lifetime of the backlight time to reach 50% initial brightness) is 30,000 hours (assuming continuous lit state at 25 degrees C). Actual lifetime before replacement is about 30,000 hours, although this depends on operating conditions. Touch Screen The operating lifetime of the touch screen is approximately 1 million operations (as tested by mechanical manipulation under 100g of force at a rate of two presses per second) This page intentionally left blank. Chapter 1 General Description The BPF-3219 is the newest Industrial Fanless Panel PC, Panel PC features anti-vibration design and is the most cost-effective alternation for users. This precise streamline platform can be applied to Kiosk, DSA, transaction terminal, POS, home security system, ATM system and voting machine parking field and more. it has a built-in VIA V4 Eden 1GHz CPU is response to demands of cost-effective panel system. All of BPF series Panel PC Support resistive/SAW touch screens, highly expandable, it is an ideal for space-limited environments, and furthermore it supports an optional rotational WLAN antenna for wireless network connection. Anti-vibration With an unique anti-vibration design, All of BPF series Panel PC has been approved for vibration tests at VIA V4 Eden 1GHz CPU in operation mode with Hard Disk 1 Ultra slim design: 55~61 mm thickness With streamlined mechanical layout, the BPF series panel PC has an ultra slim design for space-limited environment. It is not only lower maintenance time but also space saving considerably. Cost-effective Fanless Embedded System The BPF series Panel PC, the most slim, compact size, fanless embedded computer, is powered by an ultra-low powerful processor, VIA V4 Eden 1GHz CPU onboard, The total power consumption of the system is under 62W merely. It generates the best value for both power usage and cost saving. Without hard disk space and extra add-on cards, All of BPF series panel PC present an ultra slim design and provide a cost-effective alternation for users. I/O port feature contains VGA, COM, dual LAN, USB 2.0, and PS/2 connectors. Moreover, it reserved a CompactFlash socket for storage device. 1.1 Major Features The BPF-3219 series come with the following features: Ultra slim, fanless, aluminum front panel design 19” TFT color panel display Built-in HS-2613/VIA V4 Eden 1GHz CPU, 60W adapter Provides heavy duty touch screen, dimmer controller, WLAN module (optional) Onboard graphics, dual ethernet, audio controller CF, COM x 4, USB2.0 x 3 2.5” HDD space x 1, slim CD-ROM space x 1 1.2 Specifications CPU: VIA V4 Eden 1GHz CPU Memory: One SO-DIMM(DDRII) socket supports up to 1GB Chipset: VIA CX700(M) Touch Screen: 19” resistive (3.1mm) or SAW (6mm) touch screen (optional) Dimmer Controller: Dimmer controller on front panel (optional) Display: Onboard graphics controller; provides TV-Out function Ethernet: Onboard dual 10/100 Based controller 2 Wireless LAN: Option 1: By using USB port for wireless LAN module (dielectric antenna). Dimensions: 100 x 38 x 133mm Option 2: By using USB port for wireless LAN module with antenna Audio: Onboard HDAC codec Storage: Type I/II CF adapter x 1 3.5” HDD space x 1 Slim CD-ROM space x 1 Serial Port: 4 ports USB: USB2.0 port x 3 Keyboard/Mouse: PS/2 6-pin Mini DIN BIOS: AMI PnP Flash BIOS Watchdog Timer: Software programmable time-out intervals from 1~255 sec. Power In: 60W adapter Temperature: 0~+45°C (operating); -20~+70°C (storage) Dimensions: 49.0(L) x 38.0(H) x 6.1 (W) cm 1.3 Panel Specifications Screen Size: 19 inches Display Format: 1280 x 1024 pixels Pixel Pitch: 0.294 x 0.294 mm Color: 16.7M colors Brightness: 300 cd/m2 @ 7.5mA Contrast Ratio: 1300:1 (Typ) 3 1.4 4 Dimensions Chapter 2 Unpacking 2.1 Opening the Delivery Package The BPF-3219 is packed with an anti-static bag. The board contains sensitive electrical components that are easily damaged by static (electricity). Do not remove the anti-static wrapping until proper grounding have been taken. Safety instruction has been described the anti-static precautions and procedures in the previous. 2.2 Inspection After unpacking the Panel PC, places it on a raised surface and carefully inspect the board for any damage that might have occurred during shipment. Grounding the board and exercise extremely careful to prevent any damages to the board from static. Integrated circuits will sometimes come out from socket during shipment. Examine all integrated circuits, particularly the BIOS, processor, memory modules, ROM-Disk, and keyboard controller chip to ensure that they are firmly seated. The BPF-3219 delivery package contains the following items: BPF-3219 x 1 Power Cable x 1 System Board Drive CD x 1 System Board User’s Manual x 1 BPF-3219 User’s Manual x 1 Touch Screen Drive CD x 1 It is recommended that user keeps all the parts of the delivery package intactness and store them in a safe/dry place for any reasons that require for returning the product. In case you find any missing and/or damaged items from the list, please contacts your dealer or sale representatives immediately. 5 This page intentionally left blank. 6 Chapter 3 Hardware Installation This chapter illustrates how to install components into the Panel PC system. External interface please refers to system board’s manual. 3.1 Open the Cover 1. Remove screws from the back cover accordingly. 7 3.2 HDD/CD-ROM Installation 1. Unscrew the 4 screws with blue vibration pad first (figrue3.2.1), then remove the holding bracket from chassis (figure3.2.2). Figure 3.2.1 Figure 3.2.2 8 2. Attach and screw the holding bracket w/HDD (figure3.2.3), then install HDD back to chassis (figure3.2.4) Figure 3.2.3 Figure 3.2.4 3. Remove the CD-ROM drive holding bracket from chassis first (figure3.2.5). Figure 3.2.5 9 4. Attach and screw the holding bracket in the side of the CD-ROM, then screw the other side of the drive bay back to chassis (figure 3.2.6 & 3.2.7). Figure 3.2.6 Figure 3.2.7 10 3.3 SBC Installation NOTE: Please check system board user manual for connector installation. 1. Install the SBC with chassis. 2. Use 2 screws install SBC in the front panel next to VGA port. 11 3.4 WLAN Module Installation 1. Option 1: User can install USB type wireless LAN module. 2. Option 2: User can install the Network Card and Network antenna module. 12 3.5 Wallmount Installation There are four wallmount accessories come with package. Please use it as showing below. 13 This page intentionally left blank. 14 Chapter 4 Touch Screen Driver Installation This chapter illustrates the detail information for touch screen driver installation procedures. The utility disk that came with the delivery package contains an auto-run program that invokes the installation programs for the touch screen driver. The following sections describe the installation procedures of driver based on WIN2000 operation system. Other operation system may slightly different. 4.1 Resistive Type Touch Screen Driver Installation 4.1.1 Installing Touch Screen Driver for WIN95/98 1. Insert Utility CD disk to your CD-ROM drive. The main menu will pop up as shown below. 2. The screen displays copying “Installation Wizard” and “PenMount Utilities Installation” screen plus “welcome” message appear, click on Next>. 15 3. The next screen is “Software License Agreement”, select “I accept” and click on Next>. 4. The next screen is Ready to Install the Program, click on Install. 16 5. Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard. 4.1.2 Installing Touch Screen Driver for WIN2000 1. Insert Utility CD Disk to your CD-ROM drive. The main menu will pop up as shown below. 2. The screen displays copying Installation Wizard and PenMount Utilities Installation screen plus welcome message appear, click on Next>. 17 3. The next screen is Software License Agreement, select I accept and click on Next>. 4. The next screen is Ready to Install the Program, click on Install. 18 5. Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard. 4.1.3 PenMount Control Panel Calibrate To adjust the display with touch screen, click on “Calibrate” button and follow the calibrate point to do the calibration, there are five points on screen for calibration. 19 Draw Test or demonstrate PenMount touch screen operation, also the touch location is shown on the display, touch DRAW to start. About It shows information about PenMount controller and driver version. 20 4.1.4 PenMount Monitor The PenMount monitor icon is shown in the menu bar of Windows system when turn on PenMount monitor from PenMount Utilities. There are several functions on PenMount monitor: Control Panel When select this function, there is a mouse icon shown in the right-button place of screen. It shows Left Button being as default for normal use. Change Right/Left button by clicking the mouse icon box. Blue area expresses what button has been selected or active. Right Button Change Right/Left button by clicking the mouse icon box. Blue area expresses what button has been selected or active. Beep Turn on or off beep sound. Exit Close the PenMount Monitor function. 21 4.2 SAW Type Touch Screen Driver Installation 1. Insert Utility CD disk to your CD-ROM drive. The main menu will pop up as shown below. 2. The screen displays copying “Setup” and “TouchKit Setup” screen message appear, click on Next>. 22 3. The next screen is as below, and click on Next>. NOTE: The default is unchecked. 4. The next screen is the choice of setup type that “Do 4 point calibration”, select “None” and click on Next>. NOTE: Check the necessary button for your need. 23 5. 24 Choose the driver install location, and click on Next>. 6. When the TouchKit setup completed, you will see an icon names “TouchKit” on the desktop. 25