BPC-6671 17” Industrial Panel PC with MainBoard, Touch Screen, 180W ATX P/S Copyright Disclaimers The accuracy of contents in this manual has passed thorough checking and review before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for any infringements of patents or other rights resulting from its use. The manufacturer will not be responsible for any direct, indirect, special, incidental or consequential damages arising from the use of this product or documentation, even if advised of the possibility of such damage(s). This manual is copyrighted and BOSER Technology Co., Ltd. reserves all documentation rights. Unauthorized reproduction, transmission, translation, and storage of any form and means (i.e., electronic, mechanical, photocopying, recording) of this document, in whole or partly, is prohibited, unless granted permission by BOSER Technology Co., Ltd. BOSER Technology Co., Ltd. reserves the right to change or improve the contents of this document without due notice. BOSER Technology Co., Ltd. assumes no responsibility for any errors or omissions that may appear in this manual, nor does it make any commitment to update the information contained herein. TTrraaddeem maarrkkss BOSER is a registered trademark of BOSER Technology Co., Ltd. ISB is a registered trademark of BOSER Technology Co., Ltd. Intel is a registered trademark of Intel Corporation. Award is a registered trademark of Award Software, Inc. AMI is a registered trademark of AMI Software, Inc. All other trademarks, products and or product names mentioned herein are mentioned for identification purposes only, and may be trademarks and/or registered trademarks of their respective companies or owners. © Copyright 2007 BOSER Technology Co., Ltd. All Rights Reserved. Edition 1.2, May 15, 2009 Table of Contents Chapter 1 1.1 1.2 1.3 1.4 1.5 1.6 General Description ..................................1 Major Features ....................................................................... 2 Specifications ........................................................................ 2 Panel Specifications ............................................................. 3 Power Supply Specifications ............................................... 3 Control Keys .......................................................................... 3 Dimensions ............................................................................ 4 Chapter 2 Unpacking ..................................................5 2.1 Opening the Delivery Package............................................. 5 2.2 Inspection............................................................................... 5 Chapter 3 Hardware Installation ..............................7 3.1 Install Hard Disk Drive .......................................................... 7 Chapter 4 Touch Screen Driver Installation ............9 4.1 Touch Screen Driver Installation ......................................... 9 4.1.1 Installing Touch Screen Driver in WIN95/98...................................9 4.1.2 Installing Touch Screen Driver in WIN2000 ................................... 11 4.2 Driver Functions .................................................................. 14 4.2.1 PenMount Control Panel............................................................................14 4.2.2 PenMount Monitor........................................................................................15 Declaration of Conformity -- CE Mark BOSER Technology hereby acknowledges that compliance testing in accordance with applicable standards of the EU’s EMC Directive, 89/336/EEC, was successfully completed on a sample of the equipment identified below: Equipment Class: Product Model Series: This Product Complies With: Information Technology Equipment BPC-6671 EN55022: Class A for Radiated emissions EN50082-2: Heavy Industrial EMC Immunity We, the undersigned, hereby declare that the equipment specified above conforms to the above directives and standards. Manufacturer: BOSER TECHNOLOGY CO., LTD. Safety Instructions The safety recommendations outlined in this section are to be read, understood and followed before operating the product. Keep this information in a safe place for future reference. Failure to comply with any of the following safety procedures could result in serious hazard. Do not operate product for any purposes other than its intended use This product is intended for indoor use only Do not operate product if power cord is damaged in anyway Do not insert objects into openings Do not immerse product in water or permit liquids to spill inside Turn off power when unattended or not in use. Unplug product before moving it or when it is not in use for an extended period of time. The socket-outlet shall be installed near the equipment and shall be easily accessible Do not alter or extend electric plug. Plug is configured for appropriate electrical supply Do not overload electrical outlets beyond their capacity as this can result in a fire NOTE: DO NOT TOUCH THE PRODUCT OR ANY OTHER SENSITIVE COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC PROTECTIONS. Life Expectancy of Constituent Parts This section describes the life expectancy of constituent parts (backlight, power supply, internal cooling fan and touch screen) which make up to BPC-6671. TFT Display Backlight Display brightness decreases over time with use. The expected operating lifetime of the backlight time to reach 50% initial brightness) is 30,000 hours (assuming continuous lit state at 25 degrees C). Actual lifetime before replacement is about 30,000 hours, although this depends on operating conditions. Touch Screen The operating lifetime of the touch screen is approximately 1 million operations (as tested by mechanical manipulation under 100g of force at a rate of two presses per second) Chapter 1 General Description The BPC-6671 is a 17” industrial grade Panel PC which comes with a TFT color panel display. The rear design of the BPC-6671 enhances the disassembly process when required. It also supports various mounting solutions like wallmount, or desktop for different application. The BPC-6671 has a 17” display and touch screen that operate under all types of working environments. It offers OSD (On Screen Display) on the left side for user’s operation. The BPC-6671 is IBM PC/AT compatible and can draw from a large body of hardware and software resources worldwide. The BPC-6671 features an all-in-one flat display. Keyboard less operations are possible through the use of a touch screen. In addition to a watchdog timer indispensable in FA applications. You can select from a broad range of variations to arrive at the optimum configuration for your application and budget. 1 1.1 Major Features The BPC-6671 series comes with the following features: Aluminum chassis 17” TFT color panel display Built-in touch screen, OSD key, mainboard, wireless LAN module, 180W ATX P/S Provides Intel® Core™ 2 Duo/Pentium® D/Pentium® 4/Celeron® D/Celeron® processor Onboard graphics, Ethernet, audio controller Parallel, COM, 6 USB 2.5” SATA HDD space x 2, slim CD-ROM space x 1 6cm ball bearing cooling fan x 2 1.2 Specifications CPU: Intel® Core™ 2 Duo/Pentium® D/Pentium® 4/Celeron® D/Celeron® processor Memory: Two DDRII sockets supports up to 2GB OSD: Provides OSD function Touch Screen: 17” touch screen Display: Onboard graphics controller Ethernet: Onboard 10/100 Based LAN controller Wireless LAN: Provides wireless LAN module Audio: Onboard 8CH High Definition Audio controller Storage: 2.5” SATA HDD space x 2 Slim CD-ROM space x 1 Parallel: Standard parallel port x 1 Serial Port: 1 port USB: USB port x 6 Keyboard: PS/2 6-pin Mini DIN Mouse: PS/2 6-pin Mini DIN BIOS: Award PnP Flash BIOS Power In: 180W ATX power supply Thermal System: 6cm ball bearing cooling fan x 2 EMC: CE, FCC Front Panel Protection: IP65 Temperature: 0~45°C (operating); -20~+70°C (storage) Dimensions: 47.0(L) x 37.1(H) x 9.68(W) cm 2 1.3 Panel Specifications Screen Size: 17 inches Display Format: 1280 x 1024 pixels Pixel Pitch: 0.264(H) x 0.264(V) m/m Color: 16.2M color (RGB 6-bit + FRC data) Brightness: 300 cd/m2 Contrast Ratio: 500:1 Response Timer: 8ms 1.4 Power Supply Specifications Input Voltage: 100~240VAC full range Input Frequency: 47~63Hz Input Current: 4A max. 115vrms at 60Hz; 2A max. 230Vrms at 50Hz Inrush Current: 50A cold, 80A ware at 132VAC Hold Up Time: 17ms min. at full load & nominal input voltage Output Power: +3.3V and +5V total output should not exceed 61W Power Good Signal: Turn on delay 100~500ms Thermal System: 4cm ball bearing cooling fan x 1 1.5 Control Keys OSD Control Keys Define Menu: Menu/Item select Down: Cursor down control Up: Cursor up control Return: Return to menu 3 1.6 4 Dimensions Chapter 2 Unpacking 2.1 Opening the Delivery Package The BPC-6671 is packed in an anti-static bag. The board has components that are easily damaged by static electricity. Do not remove the anti-static wrapping until proper precautions have been taken. Safety instructions in front of this manual describe anti-static precautions and procedures. 2.2 Inspection After unpacking the Panel PC, place it on a raised surface and carefully inspect the board for any damage that might have occurred during shipment. Ground the board and exercise extreme care to prevent damage to the board from static electricity. Integrated circuits will sometimes come out of their sockets during shipment. Examine all integrated circuits, particularly the BIOS, processor, memory modules, ROM-Disk, and keyboard controller chip to ensure that they are firmly seated. The BPC-6671 delivery package contains the following items: BPC-6671 x 1 Power Cable x 1 Drive CD Disk x 1 System Board User’s Manual x 1 BPC-6671 User’s Manual x 1 Touch Screen Drive Diskette x 1 It is recommended that you keep all the parts of the delivery package intact and store them in a safe/dry place for any unforeseen event requiring the return shipment of the product. In case you discover any missing and/or damaged items from the list of items, please contact your dealer immediately. 5 This page intentionally left blank. 6 Chapter 3 Hardware Installation This chapter tells how to install components into the Panel PC system. External interface please refers to system board’s manual. 3.1 Install Hard Disk Drive 1. Please loose screws and detach the HDD module from main chassis. 2. Remove the HDD form rear cover. 7 8 3. Please attach the HDD to rear cover and fasten screws. 4. Install the HDD module onto main chassis. Chapter 4 Touch Screen Driver Installation This chapter contains the detailed information of touch screen driver installation procedures. The utility disk that came with the delivery package contains an auto-run program that invokes the installation programs for the touch screen driver. The following sections describe the installation procedures of driver based on WIN2000 operating systems. It is recommended that you install the drivers matching the sections listed in this chapter. 4.1 Touch Screen Driver Installation 4.1.1 Installing Touch Screen Driver in WIN95/98 1. Insert Utility CD disk to your CD-ROM drive. The main menu will pop up as shown below. 2. The screen displays copying “Installation Wizard” and “PenMount Utilities Installation” screen plus “welcome” message appear, click on Next>. 9 3. The next screen is “Software License Agreement”, select “I accept” and click on Next>. 4. The next screen is Ready to Install the Program, click on Install. 10 5. Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard. 4.1.2 Installing Touch Screen Driver in WIN2000 1. Insert Utility CD Disk to your CD-ROM drive. The main menu will pop up as shown below. 2. The screen displays copying Installation Wizard and PenMount Utilities Installation screen plus welcome message appear, click on Next>. 11 3. The next screen is Software License Agreement, select I accept and click on Next>. 4. The next screen is Ready to Install the Program, click on Install. 12 5. Once the Install Shield Wizard finishes updating your system, it will prompt you to restart the computer. Click on Finish to exit the wizard. 13 4.2 Driver Functions 4.2.1 PenMount Control Panel Calibrate To adjust the display with touch screen, click on Calibration and follow the calibrate point to do calibration, there are five points on screen for calibration. Draw Test or demonstrate PenMount touch screen operation, also the touch location is shown on the display, touch DRAW to start. 14 About It shows information about PenMount controller and this driver. 4.2.2 PenMount Monitor The PenMount monitor icon is shown in the menu bar of WIN2000 system when turn on PenMount monitor from PenMount Utilities. There are several functions on PenMount monitor: Right Click Button When select this function, there is a mouse icon shown in the right-button place of screen. It shows Left Button being as default for normal use, touch this mouse icon to change the next touch to be Right Button function. After one touch, the mouse icon will change to Left Button automatically. If user needs to use right button again, user has to touch the mouse icon again for changing the button function. Beep Turn on or off beep sound. Exit Close the PenMount Monitor function. 15 This page intentionally left blank. 16