A Product Line of Diodes Incorporated Green FCX619 50V NPN LOW SATURATION POWER TRANSISTOR IN SOT89 Features Mechanical Data BVCEO > 50V IC = 3A High Continuous Collector Current ICM up to 6A Peak Pulse Current 2W Power Dissipation Low Saturation Voltage VCE(sat) < 220mV @ 1A RCE(sat) = 87mΩ @ 2.75A for a Low Equivalent On-Resistance hFE Characterized up to 6A for High Current Gain Hold-Up Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP Capable (Note 4) Case: SOT89 Case Material: Molded Plastic, “Green” Molding Compound UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.052 grams (Approximate) Applications Load Management Functions Motor Control DC-DC / DC-AC Converters C SOT89 E B C C B E Top View Device Symbol Top View Pin-Out Ordering Information (Note 4 and 5) Product FCX619TA FCX619-13R FCX619QTA Notes: Compliance AEC-Q101 AEC-Q101 Automotive Marking 619 619 619 Reel size (inches) 7 13 7 Tape width (mm) 12 12 12 Quantity per reel 1,000 4,000 1,000 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/. 5. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information 619 FCX619 Datasheet Number: DS33067 Rev. 8 - 2 619 = Product Type Marking Code 1 of 7 www.diodes.com December 2014 © Diodes Incorporated A Product Line of Diodes Incorporated FCX619 Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Continuous Base Current Symbol VCBO VCEO VEBO IC ICM IB Value 50 50 7 3 6 500 Unit V V V A A mA Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Power Dissipation Thermal Resistance, Junction to Ambient Air Thermal Resistance, Junction to Lead Operating and Storage Temperature Range Symbol (Note 6) (Note 7) (Note 8) (Note 9) (Note 6) (Note 7) (Note 8) (Note 9) Value 0.7 1.0 1.5 2.0 178 125 83 62.5 PD RJA (Note 10) RJL 6 TJ, TSTG -55 to +150 Unit W °C/W °C ESD Ratings (Note 10) Characteristic Electrostatic Discharge - Human Body Model Electrostatic Discharge - Machine Model Notes: Symbol ESD HBM ESD MM Value 4,000 400 Unit V V JEDEC Class 3A C 6. For a device mounted with the exposed collector pad on minimum recommended pad layout (MRP) 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in a steady-state. 7. Same as Note 5, except the device is mounted with the exposed collector pad on 15mm x 15mm 1oz copper. 8. Same as Note 5, except the device is mounted with the exposed collector pad on 25mm x 25mm 1oz copper. 9. Same as Note 5, except the device is mounted with the exposed collector pad on 40mm x 40mm 1oz copper. 10. Thermal resistance from junction to solder-point (on the exposed collector pad). 11. Refer to JEDEC specification JESD22-A114 and JESD22-A115. FCX619 Datasheet Number: DS33067 Rev. 8 - 2 2 of 7 www.diodes.com December 2014 © Diodes Incorporated A Product Line of Diodes Incorporated FCX619 140.0 3 Maximum Power (W) Thermal Resistance (°C/W) Thermal Characteristics and Derating Information 120.0 100.0 80.0 1oz copper 60.0 2oz copper 40.0 0 500 1000 T A=25°C 2 1oz copper 1 0 1500 2000 2500 0 500 1.0 0.8 0.6 0.4 0.2 0 25 50 75 100 125 1000 1500 2000 2500 Copper Area (sqmm) Thermal Resistance (°C/W) Max Power Dissipation (W) Copper Area (sqmm) 0.0 2oz copper 150 Temperature (°C) 120 100 80 D=0.5 60 40 Single Pulse D=0.2 D=0.05 20 0 100µ D=0.1 1m 10m 100m 1 10 100 1k Pulse Width (s) Transient Thermal Impedance Derating Curve Max Power Dissipation (W) 100 Single Pulse. T amb=25°C 10 1 100µ 1m 10m 100m 1 10 100 1k Pulse Width (s) Pulse Power Dissipation FCX619 Datasheet Number: DS33067 Rev. 8 - 2 3 of 7 www.diodes.com December 2014 © Diodes Incorporated A Product Line of Diodes Incorporated FCX619 Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 9) Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current Emitter Cutoff Current Symbol BVCBO BVCEO BVEBO ICBO IEBO ICES Min 50 50 7 — — — Typ. 190 65 8.3 — — — Max — — — 100 100 100 Unit V V V nA nA nA hFE 200 300 200 100 — 400 450 400 200 30 — — Collector-Emitter Saturation Voltage (Note 9) VCE(sat) — 13 150 190 240 25 220 260 320 V Base-Emitter Saturation Voltage (Note 9) Base-Emitter Turn-On Voltage (Note 9) VBE(sat) VBE(on) — — 0.97 0.89 1.1 1.0 V V fT 100 165 — MHz Cobo t(on) t(off) — — — 12 170 750 20 — — pF ns ns DC Current Transfer Static Ratio (Note 9) Transitional Frequency Output Capacitance Turn-On Time Turn-Off Time Note: Test Condition IC = 100µA IC = 10mA IE = 100µA VCB = 40V VEB = 5.6V VCES = 40V IC = 10mA, VCE = 2V IC = 200mA, VCE = 2V IC = 1A, VCE = 2V IC = 2A, VCE = 2V IC = 6A, VCE = 2V IC = 100mA, IB = 10mA IC = 1A, IB = 10mA IC = 2A, IB = 50mA IC = 2.75A, IB = 100mA IC = 2.75A, IB = 100mA IC = 2.75A, VCE = 2V IC = 50mA, VCE = 10V f = 100MHz VCB = 10V, f = 1MHz, VCC =10V, IC =1A IB1 = -IB2 = 10mA 9. Measured under pulsed conditions. Pulse width ≤ 300μs. Duty cycle ≤ 2%. FCX619 Datasheet Number: DS33067 Rev. 8 - 2 4 of 7 www.diodes.com December 2014 © Diodes Incorporated A Product Line of Diodes Incorporated FCX619 Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.) FCX619 Datasheet Number: DS33067 Rev. 8 - 2 5 of 7 www.diodes.com December 2014 © Diodes Incorporated A Product Line of Diodes Incorporated FCX619 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. D1 0 .20 R0 c SOT89 Dim Min Max Typ A 1.40 1.60 1.50 B 0.50 0.62 0.56 B1 0.42 0.54 0.48 c 0.35 0.43 0.38 D 4.40 4.60 4.50 D1 1.62 1.83 1.733 D2 1.61 1.81 1.71 E 2.40 2.60 2.50 E2 2.05 2.35 2.20 e 1.50 H 3.95 4.25 4.10 H1 2.63 2.93 2.78 L 0.90 1.20 1.05 L1 0.327 0.527 0.427 z 0.20 0.40 0.30 All Dimensions in mm H E B1 L B e D2 8° (4X ) H1 E2 A L1 D z Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X2 Dimensions Y1 Y4 X Y C G X X1 X2 Y Y1 Y2 Y3 Y4 Y3 G Y2 Value (in mm) 1.500 0.244 0.580 0.760 1.933 1.730 3.030 1.500 0.770 4.530 X1 C FCX619 Datasheet Number: DS33067 Rev. 8 - 2 6 of 7 www.diodes.com December 2014 © Diodes Incorporated A Product Line of Diodes Incorporated FCX619 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2014, Diodes Incorporated www.diodes.com FCX619 Datasheet Number: DS33067 Rev. 8 - 2 7 of 7 www.diodes.com December 2014 © Diodes Incorporated