2DA1774QLP 40V PNP SMALL SIGNAL TRANSISTOR IN DFN1006 Features Mechanical Data BVCEO > -40V IC = -100mA High Collector Current PD = 1000mW Power Dissipation Case: X1-DFN1006-3 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 0.60mm2 Package Footprint, 13 times Smaller than SOT23 0.5mm Height Package Minimizing Off-Board Profile Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish NiPdAu Complementary NPN Type 2DC4617QLP Solderable per MIL-STD-202, Method 208 e4 Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Weight: 0.0008 grams (Approximate) Halogen and Antimony Free, "Green" Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability C X1-DFN1006-3 B B C E E Bottom View Device Symbol Top View Device Schematic Ordering Information (Note 4) Product 2DA1774QLP-7 2DA1774QLP-7B Notes: Marking 8A 8A Reel size (inches) 7 7 Tape width (mm) 8 8 Quantity per reel 3,000 10,000 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http”//www.diodes.com/products/packages.html. Marking Information From date code 1527 (YYWW), this changes to: 2DA1774QLP Document number: DS31438 Rev. 5 - 2 8A 8A = Product Type Marking Code 8A 8A Top View Bar Denotes Base and Emitter Side 8A 8A F 8A 8A 2DA1774QLP-7B Top View Bar Denotes Base and Emitter Side 8A Top View Dot Denotes Collector Side 8A 2DA1774QLP-7 1 of 5 www.diodes.com May 2015 © Diodes Incorporated 2DA1774QLP Absolute Maximum Ratings (@TA = +25°C unless otherwise specified.) Characteristic Symbol VCBO VCEO VEBO IC ICM Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Peak Collector Current Value -50 -40 -5.0 -100 -200 Unit V V V mA mA Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Power Dissipation Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Symbol (Note 5) (Note 6) (Note 5) (Note 6) Value PD RJA (Note 7) Operating and Storage and Temperature Range Unit 400 1,000 310 120 mW °C/W RJL 120 °C/W TJ, TSTG -55 to +150 °C ESD Ratings (Note 8) Characteristic Electrostatic Discharge - Human Body Model Electrostatic Discharge - Machine Model Electrical Characteristics Characteristic OFF CHARACTERISTICS (Note 9) Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Symbol ESD HBM ESD MM Value 4,000 200 Unit V V JEDEC Class 3A B (@TA = +25°C unless otherwise specified.) Symbol Min Max Unit BVCBO BVCEO BVEBO -50 -40 -5.0 Collector Cutoff Current ICBO Emitter Cutoff Current ON CHARACTERISTICS (Note 9) DC Current Gain Collector-Emitter Saturation Voltage SMALL SIGNAL CHARACTERISTICS Output Capacitance IEBO -100 -5 -100 V V V nA A nA IC = -50µA, IE = 0 IC = -1mA, IB = 0 IE = -50 µA, IC = 0 VCB = -30V VCB = -30V, TA = +150°C VEB = -4.0V hFE VCE(SAT) 120 270 -0.2 V VCE = -6.0V, IC = -1.0mA IC = -50mA, IB = -5.0mA Cobo 5.0 pF fT 100 MHz VCB = -12V, f = 1.0MHz, IE = 0 VCE = -12V, IC = -2.0mA, f = 100MHz Current Gain-Bandwidth Product Notes: Test Condition 5. For the device mounted on minimum recommended pad layout 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in steady state condition. The entire exposed collector pad is attached to the heatsink. 6. Same as Note 5, except the exposed collector pad is mounted on 25mm x 25mm 2oz copper. 7. Thermal resistance from junction to solder-point (on the exposed collector pad). 8. Refer to JEDEC specification JESD22-A114 and JESD22-A115. 9. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2%. 2DA1774QLP Document number: DS31438 Rev. 5 - 2 2 of 5 www.diodes.com May 2015 © Diodes Incorporated 2DA1774QLP Typical Electrical Characteristics 2DA1774QLP Document number: DS31438 Rev. 5 - 2 (@TA = +25°C, unless otherwise specified) 3 of 5 www.diodes.com May 2015 © Diodes Incorporated 2DA1774QLP Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A A1 X1-DFN1006-3 Dim Min Max Typ A 0.47 0.53 0.50 A1 0.00 0.05 0.03 b 0.10 0.20 0.15 b2 0.45 0.55 0.50 D 0.95 1.075 1.00 E 0.55 0.675 0.60 e 0.35 L1 0.20 0.30 0.25 L2 0.20 0.30 0.25 L3 0.40 z 0.02 0.08 0.05 All Dimensions in mm Seating Plane D b Pin #1 ID e E b2 z L3 L2 L1 Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. C Y Dimensions C G1 G2 X X1 Y Y1 Y1 G2 X G1 Value (in mm) 0.70 0.30 0.20 0.40 1.10 0.25 0.70 X1 2DA1774QLP Document number: DS31438 Rev. 5 - 2 4 of 5 www.diodes.com May 2015 © Diodes Incorporated 2DA1774QLP IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com 2DA1774QLP Document number: DS31438 Rev. 5 - 2 5 of 5 www.diodes.com May 2015 © Diodes Incorporated