Onscreen Display Controller for ASSP Screen Display Control

New Products
MB90050
Onscreen Display Controller for
ASSP Screen Display Control
MB90050
An onscreen display controller mounted with analog circuit for video signal
generation conforming to NTSC/PAL methods. Supports multi-character
display/multicolor display with high-resolution fonts. Capable of displaying
a wide variety of characters/figures on TV screens at high resolution with
few external parts attached.
Product Overview
FUJITSU has just developed MB90050, an onscreen display
controller (OSDC) with a built-in NTSC/PAL video signal
generation circuit.
Conventional OSDCs are used to display information from
AV amplifiers, stationary VCRs, etc. on TV screens. With the
recent diversification of information to be displayed, there is
now a demand for OSDCs capable of more diversified
expression and higher quality. To address this demand,
FUJITSU mounted an OSDC with a palette register especially
intended for analog display. With this feature, the OSDC
offers an optional 16-color display instead of the fixed 8-color
display (basically 2 monoclonal levels 6 colors) normally
offered by conventional products (products with built-in
video signal generation circuits).
The display area in the transverse direction has also been
modified, expanding the maximum display capability up
from the conventional 32 characters to 35. This enables support
for multi-character displays such as captions.
MB90050 has newly incorporated a built-in font RAM for
8 characters-a marked improvement over the basic configuration with only mask ROM (font ROM) in conventional
products. This changes makes it possible to display another
set of rewritable characters besides mask ROM simply by
transferring data from an external memory to the font RAM
of the OSDC.
In addition to enabling the display of record-programming
screens and graphically displayed menu screens, these features
give MB90050 the ability to construct/display easy-tounderstand information screens.
Photo 1 External View
2002
No.4
FIND Vol.20
31
New Products
MB90050
Product Features
Table 1 shows the main specifications, Fig. 1 shows the block
diagram, and Fig. 2 shows the pin assignments.
■ Analog Circuit for Video Signal Generation
A synchronized signal generator and NTSC/PAL-compliant
Table 1 Main Specifications
32
FIND Vol.20
No.4
2002
video signal generation circuit are built in. The circuit supports
video signal input/output, and the product displays OSDC
characters superimposed on TV signals or generated/
displayed video signals.
Composite video input/output: VIN, VOUT terminal
Y/C video input/output: YIN, YOUT terminal CIN, COUT
terminal
New Products
■ Analog/Digital Color Palette Function
Sixteen optional colors can be set in video output (analog)
with the color palette mounted.
Video output: 16 optional colors can be set (built-in palette
circuit for analog only)
Digital output: 16 colors can be selected from 64 colors
(built-in palette circuit)
■ Built-in Font ROM Font RAM
A total of 512 character types can be used with the font ROM
and font RAM configurations.
Font ROM: 512 character types (user setup possible for all
fields)
Font RAM: 8 character types (user command setup possible
MB90050
for all fields)
Specific 8-character field within the font ROM field can
be set to replace the font RAM.
■ Display field consists of up to 35 characters with highquality character display
Displays a maximum of 35 characters 16 lines (max. 560
characters). 24-dot 32-dot per one character (high-quality
character display).
Normal character: 24-dot 32-dot
Graphic character: 12-dot 16-dot (coloring possible at 1 dot)
1 dot per graphic character is equivalent to 2 2 dots per
normal character.
Figure 1 Block Diagram
2002
No.4
FIND Vol.20
33
New Products
MB90050
■ External interface: 16-bit serial input (3-signal input)
Chip select signal
Serial clock signal
Serial data signal
■ Operation Frequency
Crystal oscillation: 14.31818MHz (NTSC), 17.734475MHz
(PAL)
Figure 2 Pin Assignments
34
FIND Vol.20
No.4
2002
LC oscillation: to 20MHz
■ Power supply voltage: Vcc 4.5V to 5.5V
■ Package: FPT-48P-M15
(0.8mm pitch 12mm 12mm: QFP-48)
✱