DataSheet - Aplus Integrated Circuits Inc.

Integrated Circuits Inc.
aIVR341N
APLUS MAKE YOUR PRODUCTION A-PLUS
Data Sheet
aIVR341N – 341 sec
APLUS
INTEGRATED CIRCUITS INC.
Address:
3 F-10, No. 32, Sec. 1, Chenggung Rd., Taipei,
Taiwan 115, R.O.C.
(115)台北市南港區成功路一段 32 號 3 樓之 10.
Sales E-mail:
[email protected]
TEL: 886-2-2782-9266
FAX: 886-2-2782-9255
WEBSITE : http: //www.aplusinc.com.tw
2
Support E-mail:
[email protected]
July 30, 2013
Integrated Circuits Inc.
aIVR341N
FEATURES
Standard CMOS process.
Embedded EPROM.
Embedded 8-bit MCU.
341sec voice duration at 6 KHz sampling with 4-bit ADPCM compression.
Combination of voice building blocks to extend playback duration.
Table entries are available for voice block combinations.
User selectable PCM or ADPCM data compress.
Voice Group Trigger Options: Edge / Level; Hold / Un-hold; Retrigger / Non-retrigger.
Programmable I/Os, Timer Interrupt and Watch Dog Timer.
Built-in oscillator with fixed Rosc, software control sampling frequency
2.4V – 3.6V single power supply and < 5uA low stand-by current.
PWM Vout1 and Vout2 drive speaker directly.
D/A COUT with ramp-up ramp-down option to drive speaker through an external BJT.
Volume control.
Maximum 9-bit resolution.
Internal Power-up reset circuit built-in; RSTB provides external controlled reset to the chip.
DESCRIPTION
Aplus’ aIVR341N is a 8-bit MCU based Voice chip. It is fabricated with Standard CMOS process
with embedded voice storage memory. It can store 341sec voice message with 4-bit ADPCM
compression at 6KHz sampling rate. 8-bit PCM is also available as user selectable option to improve
sound quality. There are upto fifteen programmable I/O pins. Key trigger and Parallel CPU trigger
mode can be configured according to different application requirement. User selectable triggering and
output signal options provide maximum flexibility to various applications. Built-in resistor controlled
oscillator, 9-bit resolution current mode D/A output and PWM direct speaker driving minimize the
number of external components. Volume control for both DAC and VOUT output is available.
3
July 30, 2013
Integrated Circuits Inc.
aIVR341N
PIN CONFIGURATION
PIN DESCRIPTIONS
Pin Names
VOUT1
VOUT2_COUT
VSS
VSSA
Description
PWM output to drive speaker directly
PWM output or COUT DAC output select by programmable option
Power Ground
Analog Power Ground
OSC
Oscillator input
VDD
Positive Power Supply
VDDA
VPP
Analog Positive Power Supply
Positive Power for EPROM programming, NC during voice playback
PB0~PB3
Programmable I/O port B
PC0~PC3
Programmable I/O port C
PD0~PD2
Programmable I/O port D
PE0~PE3
Programmable I/O port E
RSTB
Reset pin, Low active;
Note:
PB, PC, PD and PE ports are software programmable I/O pins that can be set to different
configurations such as pure input, input with pull-up, input with pull-down and output. The
programmable I/O pins set up will take effect immediately after chip RESET is applied.
Pins for memory programming are: VDD, VDDA, VSS, VSSA, VPP, PB0, PB1, OSC, VOUT2
and RSTB.
4
July 30, 2013
Integrated Circuits Inc.
aIVR341N
BLOCK DIAGRAM
OSC
VDD,
VDDA,
VPP
Oscillator
MEMORY
VSS,
VSSA
Clock
Tree
Generator
PB0 ~ 3
PC0 ~ 3
PD0 ~ 2
PE0 ~ 3
8-bit
MCU
I/O
PWM
Driver
&
DAC
VOUT1
VOUT2_
COUT
ABSOLUTE MAXIMUM RATINGS
Symbol
Rating
Unit
VDD - VSS
-0.5 ~ +4.0
V
VIN
VSS - 0.3<VIN<VDD + 0.3
V
VOUT
VSS <VOUT<VDD
V
T (Operating):
0 ~ +85
℃
T (Junction)
-40 ~ +125
℃
T (Storage)
-55 ~ +125
℃
5
July 30, 2013
Integrated Circuits Inc.
aIVR341N
DC CHARACTERISTICS ( TA = 0 to 70℃, VDD = 3.0V, VSS = 0V )
Symbol
Parameter
Min.
Typ.
Max.
Unit
VDD
Operating Voltage
2.2
3.0
3.6
V
ISB
Standby current

1
5
µA
I/O properly terminated
IOP
Operating current

7

mA
I/O properly terminated
VIH
"H" Input Voltage
2.5
3.0
3.5
V
VDD=3.0V
VIL
"L" Input Voltage
-0.3
0
0.5
V
VDD=3.0V
IVOUTL_N
VOUT low O/P Current
(Normal Volume)

130

mA
Vout=1.0V
IVOUTL_H
VOUT low O/P Current
(High Volume)

200

mA
Vout=1.0V
IVOUTH_N
VOUT high O/P Current
(Normal Volume)

-130

mA
Vout=2.0V
IVOUTH_H
VOUT high O/P Current
(High Volume)

-200

mA
Vout=2.0V
ICO
COUT O/P Current

-2

mA
Data = 80h
IOH
O/P High Current

-10

mA
VOH=2.5V
IOL
O/P Low Current

17

mA
VOL=0.3V
RNVOUT
VOUT pull-down
resistance

100K

Ω
VOUT pin set to internal
pull-down
RNPIO
Programmable IO pin
pull-down resistance

1M

Ω
PBx, PCx, PDx set to
internal pull-down
RUPIO
Programmable IO pin
pull-up resistance
3.3K
4.7K

Ω
PBx, PCx, PDx set to
internal pull-up
∆Fs/Fs
Frequency stability
-3

+3
%
∆Fc/Fc
Chip to chip Frequency
Variation
-5

6
+5
%
Conditions
VDD = 3V +/- 0.4V
Also apply to lot to lot
variation
July 30, 2013
Integrated Circuits Inc.
aIVR341N
TYPICAL APPLICATIONS
Rp=1ohm
R1
1M
C2, 0.1uF
VDDA
VDD
ROSC=220K
C1, 0.1uF
OSC
VOUT1
PB0
PB1
PB2
3.3V
SP
VOUT2_
COUT
PB3
Rrst = 4.7K
RSTB
VSS, VSSA
Crst = 0.1uF
Note:
1. PB0 to PB2 are set to input; PB3 is set to output
2. C1 and C2 must be connected directly on the VDD, VDDA and VSS, VSSA pins of the chip
3. R1 is optional for fast discharge of C1, C2 and Crst when power off.
Using 3.3V Battery Direct Drive Speaker
Rp=1ohm
ACE507A33
C2, 0.1uF
ROSC=220K
VDDA
VDD
8Ω 1/4W
Speaker
C1, 0.1uF
OSC
4.5V
VOUT2_
COUT
PB0
PB1
PB2
Tr
Rb
4.7K
RSTB
VSS, VSSA
0.1uF
Note :
PB0 to PB2 are set to input
C1 and C2 must be connected directly on the VDD/VDDA and
VSS/VSSA pins
Output driving of ACE LDO:
ACE507A33 (300mA, 3.3V)
Using 4.5V Battery with COUT speaker drive
7
July 30, 2013
Integrated Circuits Inc.
aIVR341N
VIN=+5V
Rp=1ohm
VOUT=+3.5V
ACE507A33
C1, 0.1uF
C2, 0.1uF
8Ω 1/4W
Speaker
VDDA
VDD
4.7K
ROSC
220K
OSC
MCU
Addr[0]
Addr[1]
Addr[2]
PB0
PB1
PB2
PB3
IO0
VOUT2_
COUT
Tr
Rb
RSTB
0.1uF
VSS, VSSA
Note :
PB0 to PB2 set to internal pull-up
Addr[0] to [2] are open drain output drive
5V CPU Control with COUT
Note for COUT speaker drive:
1. C1 and C2 must be connected as close to the VDD/VDDA and VSS/VSSA pins as possible.
2. Rb is base resistor from 120 Ohm to 390 Ohm depends on value of VDD and transistor gain.
3. Tr is an NPN transistor with beta larger than 150, e.g. 8050D.
4. Rosc = 220K Ohm with Vdd=3.0V can support sampling rate up to 14KHz.
8
July 30, 2013
Integrated Circuits Inc.
aIVR341N
Bonding Diagrams
Note: Substrate must be connected to VSS
9
July 30, 2013
Integrated Circuits Inc.
aIVR341N
Packages Dimension Outlines
20PIN 300mil DIP Package
20PIN 300mil SOP Package
10
July 30, 2013
Integrated Circuits Inc.
aIVR341N
24PIN 300mil DIP Package
24PIN 300mil SOP Package
11
July 30, 2013