LCD Switches Programmable OLED Video Switch and Display IS Series DISTINCTIVE CHARACTERISTICS t0SHBOJD-&%UFDIOPMPHZ tRangFPGDPMPSTinbiUNPEFDPMPSTinbiUmPEF tFuMMWiFXingangMFPG° t&YDFpUJPOBMDPOUraTUBOECSJHIUnFTTUimFTgrFaUFrCSJHIUnFTTUIBOprFWJPVT-$%QSPEVDUT GPVSUimFTNPSFFOIBODFErFTPMuUJPn t)JHIrFTPMuUJPOQSPWJEFTTIBSQcMFarimagFTPGWFrZTmaMMDIBSBDUFrT t0pFraUFECZDPNNBOETBOEEBUaTuppMiFEWia4PIDPNNVOJDBUJPnTQSPUPDPM t%JTUincUMPOHUraWFMPGmmTamFaT,P4FriFT) t%VTUUJHIUDPOTUrucUJPn t4PQIJTUicaUFEIPVsingbaTFEPObMacLDPMPr 7JFXJOHBSFBNNYNNIPSJ[POUBMYWFrUJDBM )JHISFMJBCJMJUZBOEMPOHMJGFPGUISFFNJMMJPO BDUVBUJPOTNJOJNVN )JHISFTPMVUJPOPG3(#YQJYFMT &QPYZ4FBMFE4USBJHIU1$TFrNJOBMT 4OBQJO4UBOEPffGPS&BTZ4FDVSF.PVOUJOHBOE"MJHONFOU 7JFXJOHBSFBNNYNNIPSJ[POUBMYWFrUJDBM )JHISFTPMVUJPOPG3(#YQJYFMT $SJNQFEUFrNJOBMTFOTVSFTFDVSF1$NPVOUJOH BOEQSFWFOUEJTMPEHJOHEVSJOHXBWFTPMEFSJOH All specifications are restricted to QA test criteria. DRW: D.L. JIN, CHK: D.F. LEE, APP: H.Z. QIU APPLICATIONS "DUVBM4J[FT 5IF0-&%4MART48*5$) 4FriFTDPNQMFmFnUT muMUipMFappMicaUJPOTincMVEJOH TM t#SPBEDBTUFquipmFnU tImagFFquipmFnU t&EVDBUJPOFquipmFnU tVFOEJOHNBDIJOFs t"VEJPFquipmFnU tPO4 t"uUPNBUJPODPOUSPMFquipmFnU [email protected] www.greatecs.com 1 LCD Switches Programmable OLED Video Switch and Display IS Series SMARTSWITCH PART NUMBER & DESCRIPTION Part Number Switch Description OLED Pixel Format ISC15ANP4 SPST Momentary ON Gold Contacts Straight PC Terminals Color OLED Display Module 65,536 Colors 64RGB x 48 Pixels Horizontal x Vertical SMARTSWITCH SPECFICATIONS Circuit SPST normally open Contact Position Leave actuator: 1 – 2 OFF Push actuator: 1 – 2 ON Electrical Capacity (Resistive Load) 100mA @ 12V DC Contact Resistance 200 milliohms maximum @ 20mV 10mA Insulation Resistance 100 megohms minimum @ 100V DC Dielectric Strength 125V AC for 1 minute minimum Mechanical Endurance 3,000,000 operations minimum Electrical Endurance 3,000,000 operations minimum Operating Force 2.0 ± 0.5 Newtons Total Travel 4.5mm (.177”) SMARTSWITCH OLED SPECFICATIONS Characteristics of Display Display Device Color OLED display module Display Mode Passive matrix Viewing Area 15.5mm x 11.6mm (horizontal x vertical) Pixel Format 64RGB x 48 pixels (horizontal x vertical) Pixel Size 0.21mm x 0.20mm (horizontal x vertical) Interface Serial (SPI) interface Number of Colors 65,536 Colors (16bit: R 5bit/G 6bit/B 5bit) or 256 Colors (8bit: R 2bit/G 3bit/B 3bit) Operating Temperature Range –20°C ~ +70°C (–4°F ~ +158°F) Storage Temperature Range –30°C ~ +80°C (–22°F ~ +176°F) Operating Life Time (Display) 30,000 hours (at 40% duty) Absolute Maximum Ratings Recommended Operating Conditions Items Symbols Supply Voltage for Logic/Interface V DD Supply Voltage for Drive Input Voltage Ratings Items DD 2.4V 2.8V 3.5V V CC 15.0V 16.0V 17.0V V IH 0.8 x V –– –– V IL –– V CC –0.3V to +19.0V Supply Voltage for Drive VI –0.3V to V Input High Level Voltage Input Low Level Voltage D D +0.3V CC DD –– 0.2V x V DD Optical Characteristics (Temperature at 25°C, Initial Value: 87 x 0F) = 16.0V) Symbols Min Typical Max Items All-Pixels-On Mode *Drive System Power Current I CC1 –– 5.5mA 7.0mA Luminosity All-Pixels-On Mode *Logic/IF System Power Current I DD1 –– 0.16mA 0.2mA White Color Coordinate Sleep Mode **Drive System Power Current I CC2 –– –– 10μA Red Color Coordinate Sleep Mode **Logic/IF System Power Current I DD2 –– –– 10μA * All pixels shall be turned on with the maximum level gray scale ** All pixels shall be turned o (while chip is operating) [email protected] Maximum V DD = 2.8V, V Items Typical –0.3V to +4.0V Current Consumption (Temperature at 25°C, V Symbols Minimum Supply Voltage for Logic/Interface Green Color Coordinate Blue Color Coordinate Contrast Ratio (x) (y) (x) (y) (x) (y) (x) (y) Min Typical Max Unit Remarks 75 100 125 cd/m 2 White (All pixels on) 0.29 0.30 0.60 0.31 0.26 0.59 0.10 0.12 100 0.31 0.35 0.64 0.35 0.30 0.63 0.14 0.18 –– 0.35 0.40 0.68 0.39 0.34 0.67 0.18 0.24 –– –– –– –– –– –– –– –– –– –– www.greatecs.com 2 LCD Switches Programmable OLED Video Switch and Display IS Series SMARTSWITCH BLOCK DIAGRAM & PIN CONFIGURATIONS Color OLED Panel 64RGB x 48 SR1,SG1,SB1......SR64, SG64,SB64 COM1....COM48 Segment Driver Common Driver OLED Driver with Controller VDD 3 VCC 9 RES 5 SEG/COM Driving Block Gray Scale Decoder SCK 7 SS 4 SDI 8 D/C 6 Oscillator Graphic Display Data RAM 96 x 64 x 16 Bit Display Timing Generator Command Decoder MCU Interface ISC15ANP4 GND 10 SW 2 1 Pin No. Symbol 1 2 SW Name Function 3 4 SW SW V DD SS Terminal of Switch Terminal of Switch Power Slave Select Normally open Normally open Power source for logic circuit Slave select for SPI. This line is active low. 5 RES Reset Reset signal input. When pin is low, initialization of chip is executed 6 D/C Data/Command Data/Command Control. When pin is pulled low, data will be interpreted as Command; when pulled high, data will be interpreted as Data. 7 8 SCK SDI VCC GND Serial Clock Serial Data In Power Ground Clock line for SPI that synchronizes command and data Data input line for SPI Power source for drive OLED Connect to ground 9 10 SMARTSWITCH TYPICAL DIMENSIONS Terminal numbers are not on the switch. See Pixel Detail (3.3) .130 (13.41) .528 (18.0) .709 Standoff 2 Standoff 1 (0.6) Typ .024 (20.59) .811 (9.57) .377 (0.21)Typ .0083 (0.02) Typ .0008 (16.0) .630 (0.4) Typ .016 See Standoff Detail (15.5) .610 (23.13) .911 Pixel Detail (23.0) .906 Pixel Detail A (0.20) .0079 (0.17) .0067 (0.02) Typ .0008 See Pixel Detail A [email protected] 9 Standoff 1 (0.3) Typ .012 (3.4) .134 Standoff Detail (8.0) .315 (7.05) .278 2x (0.9) Dia .035 (1.0)Typ .039 (1.25) .049 R G B R (2.0) Dia .079 (0.21) .0083 (0.2) Typ .008 (2.0) .079 (18.0) .709 Footprint A (7.0) .276 3 Standoff 2 (0.2) .008 R 4 1 (7.0) .276 9 3 (0.04) Typ .0016 (0.07) Typ .0028 10 (7.62) .300 (0.74) .029 (0.20) Typ .0079 (1.0)Typ .039 2 (11.6) .457 Dimension A Standoff 2 = (2.3) Standoff 1 = (2.7) .091 .106 2 10 (7.62) .300 4 1 (16.0) .630 8x (0.75) Dia .029 (2.0) .079 (7.05) .278 (8.0) .315 4x (1.3) Dia .051 Landless www.greatecs.com 3 LCD Switches Programmable OLED Video Switch and Display IS Series SMARTSWITCH PART NUMBER & DESCRIPTION Part Number Display Description OLED Pixel Format ISC01P Straight PC Terminals Color OLED Display Module 65,536 Colors 52RGB x 36 Pixels Horizontal x Vertical SMARTSWITCH LCD SPECFICATIONS Characteristics of Display Display Device Color OLED display module Display Mode Passive matrix Viewing Area 12.9mm x 9.9mm (horizontal x vertical) Pixel Format 52RGB x 36 pixels (horizontal x vertical) Pixel Size 0.21mm x 0.22mm (horizontal x vertical) Interface Serial (SPI) interface Number of Colors 65,536 Colors (16bit: B 5bit/G 6bit/R 5bit) or 256 Colors (8bit: B 3bit/G 3bit/R 2bit) Operating Temperature Range –20°C ~ +70°C (–4°F ~ +158°F) Storage Temperature Range –30°C ~ +80°C (–22°F ~ +176°F) Operating Life Time (Display) 30,000 hours (40% pixels ON) Absolute Maximum Ratings Absolute Maximum Ratings Items Symbols Ratings Items Symbols Minimum Typical Maximum Supply Voltage for Logic/Interface V DD –0.3V to +4.0V Supply Voltage for Logic/Interface V DD 2.4V 2.8V 3.5V Supply Voltage for Drive V CC 0.3V to +19.0V Supply Voltage for Drive V CC 15.0V 16.0V 17.0V Input High Level Voltage –– –– VI –0.3V to V VIH 0.8 x V Input Voltage Input Low Level Voltage V IL –– DD +0.3V DD –– 0.2V x V DD Current Consumption (Temperature at 25°C, V DD = 2.8V, V Items All-Pixels-On Mode *Drive System Power Current All-Pixels-On Mode *Logic/IF System Power Current Sleep Mode **Drive System Power Current Sleep Mode **Logic/IF System Power Current CC Optical Characteristics (Temperature at 25°C, Initial Value: 87 x 0F) = 16.0V) Symbols Min Typical Max –– 4.5mA I CC1 I DD1 I CC2 I DD2 3.5mA –– 0.16mA –– –– –– –– 0.2mA [email protected] Luminosity Min Typical Max Unit Remarks 75 100 125 cd/m 2 White (All pixels on) White Color Coordinate (x) 0.29 0.31 0.35 –– (y) 0.30 0.35 0.40 –– Red Color Coordinate (x) 0.60 0.64 0.68 –– (y) 0.31 0.35 0.39 –– Green Color Coordinate (x) 0.26 0.30 0.34 –– (y) 0.59 0.63 0.67 –– Blue Color Coordinate (x) 0.10 0.14 0.18 –– (y) 0.12 0.18 0.24 –– 100 –– –– –– 10μA 10μA *All pixels shall be turned on with the maximum level gray scale **All pixels shall be turned o (while chip is operating) Items Contrast Ratio www.greatecs.com 4 LCD Switches Programmable OLED Video Switch and Display IS Series SMARTSWITCH BLOCK DIAGRAM & PIN CONFIGURATIONS Color OLED Panel 52RGB x 36 SR1,SG1,SB1......SR52, SG52,SB52 COM1....COM36 Segment Driver Common Driver OLED Driver with Controller VDD 1 VCC 7 RES 3 SEG/COM Driving Block Gray Scale Decoder SCK 5 SS 2 SDI 6 D/C 4 Oscillator Graphic Display Data RAM 96 x 64 x 16 Bit Display Timing Generator Command Decoder MCU Interface ISC01P GND 8 Pin No. Symbol Name Function 1 V DD Power Power source for logic circuit 2 SS Slave Select Slave select for SPI. This line is active low. 3 RES Reset 4 D/C Data/Command Reset signal input. When pin is low, initialization of chip is executed Data/Command Control. When pin is pulled low, data will be interpreted as Command; when pulled high, data will be interpreted as Data. 5 SCK Serial Clock Clock line for SPI that synchronizes command and data 6 SDI Serial Data In Data input line for SPI 7 VCC Power Power source for drive OLED 8 GND Ground Connect to ground SMARTSWITCH TYPICAL DIMENSIONS Terminal numbers are not on the switch. See Pixel Detail (12.9) .508 (9.9) .390 (17.2) .677 See Standoff Detail (0.4) Typ .016 (7.89) .311 (16.8) .661 (10.0) .394 (0.65) Typ .026 (14.7) .579 (5.25) .207 (0.75) .030 (0.7) .028 (9.9) .390 (10.89) .429 (17.8) .701 Pixel Detail (0.22) Typ .0087 Pixel Detail A (0.21)Typ .0083 (0.02) Typ .0008 (0.22) .0087 (0.19) .0075 (0.2) (2.0) .008 .079 (1.0) Typ .039 (3.0) .118 (7.0) .276 (15.0) .591 Footprint (14.7) .579 R R G B R (0.02) Typ .0008 See Pixel Detail A (16.8) .661 8 [email protected] (1.0)Typ .039 (5.25) .207 2 1 4x (0.9) Dia .035 (0.21) .0083 (2.0) .079 (15.0) .591 (10.0) .394 7 (0.04) Typ .0016 (0.07) Typ .0028 (0.4) Typ .016 (7.0) .276 (2.0) .079 3x (0.9) Dia .035 Landless 8x (.075) Dia .029 www.greatecs.com 5 LCD Switches Programmable OLED Video Switch and Display IS Series TIMING SPECIFICATIONS FOR SMARTSWITCH & SMARTDISPLAY AC Characteristics (Temperature at 25°C) , V DD = 2.4V ~ 3.5V) Items Symbols Minimum Typical Maximum Clock Cycle Time tcycle 150ns –– –– D/C Setup Time tA S 40ns –– –– D/C Hold Time tA H 40ns –– –– SS Setup Time tC SS 75ns –– –– D/C SS tAS tAH tC SS tC SH tR SS Hold Time tC SH 60ns –– –– Write Data Setup Time tD SW 40ns –– –– Write Data Hold Time tD HW 40ns –– –– tC LK L 75ns –– –– SCK High Time tC LK H 75ns –– –– SCK Rise Time tR –– –– 15ns SCK Fall Time tF –– –– 15ns tc yc le SCK tC LKL tF tD SW tD HW D7 SDI SCK Low Time tC LKH D6 D5 D4 D2 D3 D1 D0 STATE TRANSITION 7 : Initialization 1 : Power ON, 7 : Initialization State 0 Power OFF (VCC, VDD OFF) 2 : Power OFF State 1 Display OFF (Sleep Mode) 3 : Display ON 4 : Display OFF 8 : Changing the Display State Number State V CC VDD Changing the Display 0 Power OFF OFF –– OFF OFF Disable 1 Display OFF OFF ON ON ON Enable 2 Display ON ON OFF ON ON Enable Display Sleep State 2 Display ON 8 : Changing the Display Power ON/OFF Sequence Initialization Setting State 0 Power ON State 1 State 2 State Transition Transition 0V Reset low pulse width Trw (minimum 3µs) Index 1 Power ON 2 Power OFF 3 Display ON 4 Display OFF 7 Initialization Initialize Setting of Command/Data Image Rewriting Send Display Data Display Settings Dimmer, Scroll, etc. RES “L” or “Hi-z” Refer to "Power ON/OFF Sequence" “L” or “Hi-z” Minimum 3µs Minimum 0µs VCC 8 [email protected] State 0 Minimum 0µs Minimum 0µs VDD Power OFF D/C SS “L” or “Hi-z” SCK SDI VDD level (due to ESD protection circuit betweenVDD and VCC ) “H” or “L” “L” or “Hi-z” www.greatecs.com 6 LCD Switches Programmable OLED Video Switch and Display IS Series PRECAUTIONS FOR HANDLING & STORAGE ATTENTION ELECTROST AT IC SENSITIVE DEVICES Handling 1. The IS Series OLED devices are electrostatic sensitive. To avoid damage to IC, do not touch keytops unless properly isolated from static electricity. 2. Signal input under conditions not recommended may cause damage to the OLED unit or deterioration of the display. Follow directions regarding supply sequences of power and signal voltages. 3. If the OLED panel is broken, avoid contact with the contents and wash off any spills to the skin or clothing. 4. Limit operating force to switch keytop to 100.0N maximum, as excessive pressure may damage the OLED. 5. For OLED display, it is necessary for terminal of metal cover to be connected to a ground. 6. Recommended soldering time and temperature limits for OLED switch or display: 11 seconds maximum @ 270°C maximum; avoid temperatures exceeding 80°C at the OLED. 7. The IS series OLED devices are not process sealed. 8. If OLED unit is operated with the same display pattern, the difference between the operation duration of adjacent pixels may be interpreted as difference between luminosity of pixels. To minimize this difference, operate OLED unit so that each pixel may be turned on at frequency as equal as possible. 9. For switch, clean cap surface with dry cloth. If further cleaning is needed, wipe with dampened cloth using neutral cleanser and dry with clean cloth. Do not use organic solvent. For display, avoid contact with any flux or detergent. If any liquids spill on display surface, immediately wipe with soft absorbent cloth. Storage 1. Store in original container and away from direct sunlight. 2. Keep away from static electricity. 3. Avoid extreme temperatures, high humidity, gaseous substances, and all forms of chemical contamination. [email protected] www.greatecs.com 7