OLED Programmable Rocker Switch 1009 OLED SMARTSWITCH Rocker TM DISTINCTIVE CHARACTERISTICS • White monochrome OLED featuring sharp contrast and high resolution with 96 x 64 pixels • Wide viewing angle of 180° and large 0.92” display with exceptional contrast • Organic LED technology in display rocker (patent pending) • Multifunction programmable device: select with rocker, push for activation • All-in-one solution: replaces multiple switches and displays with one device in a small package • Easy navigation through structured menus, both forward and reverse and up and down • Waterprotected and dust tight; conforms to IP64 of IEC60529 Standards on panel surface • Displays up to 8 lines with 16 characters 5 x 7 each, or 5 lines with 12 characters 7 x 10 each • Graphics and animations • Long life OLED with 52,000 hours at 30% illumination • Panel mount with easy snap-in installation • Short 14.6mm (.575”) behind-panel depth for compact spaces • Commands and data supplied via serial communications protocol (SPI) • Stylish black housing design with matte finish complements any application • High reliability and long mechanical and electrical life of one million actuations minimum APPLICATIONS Application Specific Keyboards Medical Aerospace and Military Process Control Broadcast Panels Real Time Data Monitoring Configuration Menus Security Systems Factory Automation Simulation Lighting/Stage/Theater Controls Test Equipment Actual Size Machine Control/Robotics www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected] 2 OLED SMARTSWITCH Rocker TM PRODUCT OVERVIEW NKK provides several options for ease of prototyping. The OLED Rocker Kit IS18WWC1W-K includes all items that are needed for a quick start of any project. The IS-DEV Kit-8 is a complete kit for demonstration with preprogrammed option or to be operated with customized graphics. All items below can also be purchased separately to accomodate customers’ needs. Part Number Description OLED Rocker Kit: SP3T Switch Rocker (ON) (ON) (ON) IS18WWC1W-K Pushbutton Normally OFF Packaged with Charge Pump IS-CHPMP, AT715 Connector Cable, AT097 PCB Connector OLED Rocker Switch: SP3T Switch IS18WWC1W Rocker (ON) (ON) (ON) Pushbutton Normally OFF AT 715 Connector Cable with (2) JST 12SUR-32S Connectors (500.0) +50.0 – 0.0 19.685 IS-CHPMP Charge Pump Voltage Booster Input: 2.7~5.5V Output: 16V Meets all OLED power requirements AT 097 PCB Connector Female SMT Connector JST BM12B-SURS Plug and play Dev Kit Ready to use Pre-programmed for instant demo Easy creation, testing and display for rapid prototype designs IS-DEV Kit-8 www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected] 3 OLED SMARTSWITCH Rocker TM SWITCH SPECIFICATIONS Circuit Electrical Capacity (Resistive Load) Single Pole Three Throw (Momentary) Top Center Normal Down Normal Down OFF (ON) 9-12 OFF (ON) 10-12 3VA maximum DC Contact Resistance 200 milliohms maximum Insulation Resistance 500 megohms minimum @ 250V DC Dielectric Strength 250V AC for 1 minute minimum Electrostatic Resisting Pressure 15kV minimum Mechanical Endurance 1,000,000 operations minimum Electrical Endurance 1,000,000 operations minimum Operating Force 6.0 Newtons at center of cap Total Travel 1.4mm (.055”) at center of cap Contact Position Normal OFF Bottom Down (ON) 11-12 OLED SPECIFICATIONS Characteristics of Display Display Device Single color OLED display Display Mode Passive matrix Pixel Format 96 x 64 pixels (horizontal x vertical) Pixel Size 0.16mm x 0.177mm (horizontal x vertical) Interface Serial (SPI) interface Color White/Black (normally White) Splash & Dust Proof Conforms to IP64 of IEC60529 standards on panel surface Operating Temperature Range –20°C ~ +70°C (–4°F ~ +158°F) Storage Temperature Range –25°C ~ +80°C (–13°F ~ +176°F) Operating Life Time (Display) 52,000 hours (30% brightness); 15,600 hours (100% brightness) Absolute Maximum Ratings (Temperature at 25°C) Recommended Operating Conditions Items Symbols Supply Voltage for Logic/Interface VDDA Ratings Items –0.3V to +3.6V Supply Voltage for Logic/Interface Symbols Minimum Typical Maximum VDDA 2.7V 2.8V 2.9V Supply Voltage for Drive VAH –0.3V to +18.0V Supply Voltage for Drive VAH 14.5V 15.0V 15.5V Input Voltage Vin –0.3V to VDDA +0.3V Input High Level Voltage VI H 0.75 x VDDA –– VDDA Input Low Level Voltage VI L 0.0 –– 0.25V x VDDA Current Consumption (Temperature at 25°C, VDDA = 2.8V, VAH = 15.0V) Items Symbols Min Typical Optical Characteristics Max All-Pixels-On Mode *Drive System Power Current I H1 –– 11.0mA 13.2mA All-Pixels-On Mode *Logic/IF System Power Current I DD1 –– 0.58mA 0.72mA Sleep Mode **Drive System Power Current I H2 –– –– 10μA Sleep Mode **Logic/IF System Power Current I DD2 –– –– 10μA * All pixels shall be turned on with the maximum level gray scale ** All pixels shall be turned off (while chip is operating) (Temperature at 25°C, Initial Value: depends on initial setting) Items Minimum Typical Maximum 75 cd/m2 100 cd/m2 125 cd/m2 (x) *1 0.310 *1 (y) *1 0.320 *1 100 –– –– Brightness Chromaticity Contrast * Chromaticity range is the area of the ellipse. (See Chromaticity Diagram next page) The ellipse passes through points A, B, C and D and designates the center of each side of the quadrangle. www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected] 4 OLED SMARTSWITCH Rocker TM Chromaticity Diagram Chromaticity X Chromaticity Y A 0.3441 0.3663 B 0.2983 0.3384 C 0.2799 0.2881 D 0.3257 0.3160 Chromaticity Y Point TIMING SPECIFICATIONS AC Characteristics (Temperature at –20°C ~ +70°C), VDDA = 2.8V, VAH = 16V Items Symbols Minimum Typical Maximum Clock Cycle Time t c yc le 100ns –– –– A0 Setup Time t SWDS 65ns –– –– A0 Hold Time t SWDN 35ns –– –– XCS Setup Time t CWS 65ns –– –– XCS Hold Time t CWH 95ns –– t CSBH *10ns –– –– Write Data Setup Time t WDTS 10ns –– –– Write Data Hold Time t WDTH 20ns –– –– SCL Low Time t SCLL 45ns –– –– SCL High Time t SCLH 45ns –– –– SCL Rise Time tr –– –– 15ns SCL Fall Time tf –– –– 15ns A B D C 0.27 0.29 0.31 0.33 Chromaticity X 0.35 0.37 A0 –– High Level XCS Pulse Width 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.26 0.25 0.25 tSWDS t SWCH t C WS t CWH XCS tCSBH tR t S C LH t c y c le SCL tF t S C LL tW D S SI tW D T H D7 D6 D5 D4 D3 D2 D1 D0 * Requires more than 100ns after resetting software Black & White OLED Panel 96 x 64 SEG1 . . . SEG96 COM1 . . . COM64 BLOCK DIAGRAM & PIN CONFIGURATIONS Segment Driver VDDA 1 VAH 8 XRES 2 SCL XCS SI A0 5 3 6 4 Common Driver OLED Driver with Controller Light Decoder Display Control & Screen Saver Graphic Display Data RAM 128 x 64 x 1 Bit I/F Circuit Block Oscillator Timing Control Register VSS 7 IS18WWC1W Pin No. Symbol 1 2 3 4 VDDA XRES XCS 5 6 SCL SI VSS VAH SW1 SW2 SW3 SW_COM 7 8 9 10 11 12 9 SW1 10 SW2 11 SW3 SW_COM 12 A0 Name Logic Type Power Source Reset Chip Select Function Terminal to initialize IC built-in logic; initializes with low level Slave select for SPI. This line is active low. Address Terminal to input control signals of command/parameter Set low at time of command input and high level at the time of parameter input. Serial Clock Serial Data Input Ground Drive Type Power Source Switch Terminal 1 Switch Terminal 2 Switch Terminal 3 Switch Common Terminal Read command/parameter at time of SCL signal standing up Terminal to input command/parameter by SPI N/O N/O N/O www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected] 5 OLED SMARTSWITCH Rocker TM SMARTSWITCH TYPICAL DIMENSIONS (21.8) .858 See Pixel Detail (35.4) 1.394 (19.16) .754 (38.8) 1.528 (13.22) .520 (15.3) .602 (50.7) 1.996 NKK P/N This Side (30.6) 1.205 (46.7) 1.839 (35.1) 1.382 (2.0) .079 (37.9) 1.492 (0.8) .031 (5.6) .220 (14.6) .575 (34.9) 1.374 12 11 10 (0.04) Typ .0016 (0.16) Typ .0063 Panel Thickness Range (0.177) Typ .0070 (0.03) Typ .0012 3 2 1 Pixel Detail (48.6) 1.913 .039 ~ .157" (1.0mm ~ 4.0mm) Terminal Connector Detail (35.4) 1.394 STATE TRANSITION Power ON/OFF Sequence State 0 Power OFF (VAH, VDDA OFF) State 0 2 : Power OFF 8 : Initialization 7 : Power OFF Initialization Setting State 1 ( State 3) State 2 Power ON 1 : Power ON, Initialization Power OFF 2.5V 6 : VAH ON State 3 Power Saver Mode State 1 Display OFF (Sleep Mode) 5 : VAH OFF 3 : Display ON State 2 Display ON VDDA 4 : Display OFF XRES 9 : Changing the Display State Number State 9 : Changing the Display Display Sleep VAH 9 : Changing the Display VDDA Changing the Display 2.5V Waiting time for oscillation stability (about 1.1ms) 0V Reset low pulse width Trw (minimum 3µs) “L” (VDDA x 0.75)V Completion time of reset Tr (minimum 0.1µs) Waiting time to stabilize VAH Level VAH voltage: 1s (reference) Minimum 0µs Maximum 100ms Maximum 100ms “L” “L” 0 Power OFF OFF –– OFF OFF Disable 1 Display OFF OFF ON ON ON Enable A0 2 Display ON ON OFF ON ON Enable SCL/SI 3 Power Saver OFF ON OFF ON Enable Reset low pulse width Trw (minimum 1µs) (VDDA x 0.25)V Minimum 0µs Waiting time to stabilize VAH voltage: 1ms (reference) VAH 0V XCS State 0 “Hi-z” “H” or “L” “H” or “L” “H” or “L” www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected] 6 OLED SMARTSWITCH Rocker TM STATE TRANSITION (CONTINUED) State Transition Transition Reference or Setting Procedure 1 Power ON Refer to "Power ON/OFF Sequence" Refer to "Initialization Setting" Display ON/OFF Sequence 2 Power OFF Refer to "Power ON/OFF Sequence" State 2 Display State 1 VAH OFF State 3 VAH ON State 1 Display State 2 OFF ON 3 Display ON 4 Display OFF 5 VAH OFF 6 VAH ON 7 Power OFF Refer to "Power ON/OFF Sequence" 8 Initialization Refer to "Initialization Setting" 9 Display Change Refer to "Display ON/OFF Sequence" VDDA Display Wait until VAH becomes stable Standby 2.85V ON OFF Minimum 10ms ON OFF Minimum 0µs Waiting time to stabilize VAH voltage: 1ms (Reference) Minimum 0µs Image Rewriting 96 x 64 Image Data Sending Display Settings Dimmer/Screen Saver/Indication 180° Reversal VAH Minimum 0µs 15V 0V INITIALIZITION SETTING Command Name Command Parameter Remarks Address (1 or 2Byte) Software Reset 01 Dot Matrix Display ON/OFF 02 00 Read/Write Operation Wetting 07 Display Direction Set Command Command Name Command Parameter Remarks Address (1 or 2Byte) X Axis Reading Start Address 38 00 Note 1 Note 1 Y Axis Reading Start Address 39 00 Note 1 00 Note 1 Reserved 9 48 03 Note 2 09 00 Note 1 Reserved 1 10 03 Note 2 Screen Saver Event Timer Setting Command C3 00 Note 1 Reserved 2 12 63 Note 2 C4 00 Note 1 Reserved 3 13 00 Note 2 Screen Saver Event Timer Setting Command Dot Matrix Display Standby ON/OFF 14 00 One Time, Repeat or Direction Setting for Screen Saver CC 00 Note 1 Reserved 4 16 00 Note 2 Start/Stop Setting for Screen Saver CD 00 Note 1 Reserved 5 17 00 Notes 1 & 2 System Clock Division Ratio Setting D0 80 Note 2 Reserved 6 18 09 Note 2 Reserved 7 1A 04 Notes 1 & 2 Setting the STBY Pin D2 00 Notes 1 & 2 Reserved 8 1C 00 Notes 1 & 2 DACA Setting D4 00 Notes 1 & 2 Graphic Memory Writing Direction 1D 00 Note 1 DACB Setting D5 00 Notes 1 & 2 Setting Column Output Range 30 005F Note 1 DACC Setting D6 00 Notes 1 & 2 Setting Row Output Range 32 003F Note 1 DACD Setting D7 00 Notes 1 & 2 X Axis Reading/Writing Start Point 34 00 Note 1 Reserved 10 D9 00 Notes 1 & 2 X Axis Reading/Writing End Point 35 0F Note 1 Dimmer Setting DB 0F Note 1 Y Axis Reading/WritingStart Point 36 00 Note 1 Reserved 11 DD 88 Note 2 Y Axis Reading/Writing End Point 37 3F Note 1 Image Writing 08 Image data Notes: 1. Same as default value 2. Do not change setting value Notes: 1. Same as default value 2. Do not change setting value www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected] 7 OLED SMARTSWITCH Rocker TM DEVELOPMENT TOOLS NKK Switches offers a variety of development tools. These tools include software that may be downloaded from www.nkksmartswitch.com. In addition to standard configurations, NKK can provide custom solutions for the most complex design challenges. Contact factory for information and support regarding your custom applications. Development Kits provide a full set of tools for designs. The Dev Kits enable rapid prototype designs so that feedback is easily obtained. NKK’s Development Kits have been designed to facilitate the creation, testing and displaying of images with software downloaded from www.nkksmartswitch.com. Click on “Download Software.” PRECAUTIONS FOR HANDLING & STORAGE ATTENTION Handling ELECTROSTATIC SENSITIVE DEVICES 1. OLED devices are electrostatic sensitive. 2. Signal input under conditions not recommended may cause damage to the OLED unit or deterioration of the display. Follow directions regarding supply sequences of power and signal voltages. 3. If the OLED panel is broken, avoid touching the contents. Wash off in case of contact to the skin or clothing. 4. Limit operating force to 100.0N maximum, as excessive pressure may damage the display. 5. Under certain actuation conditions, one side of the rocker and the center switch can both send actuation signals. 6. Pixels acquire diminished brightness over time and use, and those most frequently habituated have greater reduction of brightness than those less used. To minimize this difference, operate OLED unit so that all pixels are used as consistently as possible. 7. Clean actuator surface with dry cloth. If further cleaning is needed, wipe with dampened cloth using neutral cleanser and dry with clean cloth. Do not use organic solvent. Storage 1. Store in original container and away from direct sunlight. 2. Keep away from static electricity. 3. Avoid extreme temperatures, high humidity, gaseous substances, and all forms of chemical contamination. Panel Mounting Incorrect Correct Gasket position must be even with no gaps beneath bezel Gasket secure and flush against bezel • Before snapping a switch into the panel, align the gasket evenly under the bezel of the switch. • When mounting into a panel, apply equal pressure to sides of bezel and insert parallel to the panel. • After mounting, be sure there are no gaps between switch and panel. Lightly push into panel. • After installing into panel, do not apply excessive force. • After panel installation and wiring is completed, do not apply force horizontally or vertically from behind panel. • Behind the panel, cut area should be squared. If front of panel is painted, do not allow any paint to collect in corners of cutout to prevent level mounting. • Avoid reinstalling a switch once it has been mounted into panel. This may cause deterioration of panel sealability. Clean Edges www.nkksmartswitch.com • Toll Free: 1.877.2BUYNKK • Tel: 480.991.0942 • Fax: 480.998.1435 • Email: [email protected] 8