Pushbutton Switches SPST Sealed Round Pushbutton Switches PB16 Series FEATURES : 1m > Sealed Protection Degree IP67 > Snap-in and threaded bushing > Compact and light weight > Tactile feeling > Plating gold over silver > Vapor phase solderable Sealed Type 1: IP67 for Panel Surface 1m IP67 Sealed Type 2: IP67 for Whole Body Protected against the effects of immersion up to 1 m water(30mn) .472 12.00 .078 2.00 .047 1.20 .197 5.00 .472 12.00 .197 5.00 .047 1.20 .138 3.50 .508 12.9 RUBBER WASHER .078 2.00 .343 8.70 M12x0.75SI .087 2.20 .015 0.40 .016 0.40 .110 2.80 EPOXY .200 5.08 PB161B1TS1... PB161D1TS1... OFF-MOM Flat Top Actuator Snap-in Bushing Solder Lug Terminals IP67 for Panel Surface OFF-MOM Flat Top Actuator Square Threaded Bushing Solder Lug Terminals IP67 for Panel Surface .689 17.50 .078 2.00 .047 1.20 .287 7.30 RUBBER WASHER PB161RB3TS1... PB161B2TS1... OFF-MOM Spherical Top Actuator Snap-in Bushing Solder Lug Terminals IP67 for Panel Surface All specifications are restricted to QA test criteria. DRW: D.L. JIN, CHK: D.F. LEE, APP: H.Z. QIU OFF-MOM Flat Top Actuator Threaded Bushing Solder Lug Terminals IP67 for Panel Surface How to order: 1 2 3 4 5 6 7 8 PB16 1 1 2 3 CIRCUITS: OFF-MOM ON-MOM (without LED) OFF-ON (only with Bushing B2) 2 ACTUATOR: blank Flat Top R Spherical Top (only without LED) 3 B1 B2 B3 D1... D2... 4 TS W1 W2 [email protected] BUSHING: Snap-in Threaded Bushing Snap-in Square Threaded Bushing (die-casting, see page 2) Threaded Bushing (die-casting, see page 2) TERMINALS: Solder Lug Wire Type 1 (See Drawing) Wire Type 2 (See Drawing) 5 1 2 SEAL O-Ring & Epoxy (IP67 for Panel Surface) O-Ring & Wire Type 2 Terminals (IP67 for whole body) 6 A C E G ACTUATOR COLOR: Black B White Red D Orange Yellow F Green Blue 7 LED COLOR: N C F No LED Red Green 8 ADDITIONAL CAP: B E G White Yellow Blue blank No Cap W With Cap www.greatecs.com 1 Pushbutton Switches SPST Sealed Round Pushbutton Switches X=LED Color .197 5.00 .078 2.00 .047 1.20 PB16 Series .197 5.00 RUBBER WASHER .287 7.30 .594 15.10 .015 0.40 .020 0.50 .134 3.40 .196 5.00 .110 2.80 .200 5.08 6.4 1 .252 .370 9.40 Heat Shrink Tube 3.94 100 5 .008 0.20 PB161B2TS1...X PB161B2W11... OFF-MOM Flat Top Actuator Threaded Bushing Solder Lug Terminals Illuminated with LED IP67 for Panel Surface OFF-MOM Flat Top Actuator Threaded Bushing Wire Terminals Type 1 IP67 for Panel Surface X=LED Color .285 7.22 .315 8.00 .484 12.30 .130 3.30 PB161B2W22... PB163B2TS1...X OFF-MOM Flat Top Actuator Threaded Bushing Wire Terminals Type 2 IP67 for Whole Body OFF-ON Flat Top Actuator Threaded Bushing Solder Lug Terminals Illuminated with LED IP67 for Panel Surface BUSHING PLATING BUSHING D1 D2 PLATING A Chromium B Tin-nickel Alloy C Stain-chromium D Stain-nickel LED ELECTRO-OPTICAL DATA PB161 (OFF-MOM) PB163 (OFF-ON) Chromium Tin-nickel Alloy Stain-chromium Stain-nickel [email protected] 2.0 2.2 2.1 2.6 2.6 2.6 3.5 3.5 3.5 60 www.greatecs.com 2 Pushbutton Switches SPST Sealed Round Pushbutton Switches PB16 Series SWITCH FUNCTION PB161 SP PB162 SP PB163 ON OFF OFF(MOM) ON 1-3 OPEN GENERAL SPECIFICATIONS RATING: PB16 1 / 2 400mA 32VAC-100mA 50VDC-125mA 125VAC PB16 3 100mA 24VDC-life expectancy 200,000 cycles 2A 125VAC-life expectancy 10,000 cycles INITIAL CONTACT RESISTANCE: PB16 1 / 2 PB16 3 50m max. 100m max. INSULATION RESISTANCE: 1G min.at 500VDC. DIELECTRIC STRENGTH:1,000 VAC rms. ELECTRICAL LIFE AT FULL LOAD: 500,000 cycles. OPERATING TEMPERATURE: -30°C to 85°C. PANEL THICKNESS: - B1 bushing : 0.8 mm (.031) min. -1.8 mm (.071) max. - B2 bushing : 1.5 mm (.059) min. -4 mm (.157) max. PB16 1 / 2 - B3 bushing : 3.0±0.25 mm (.118) PB16 3 - B2 bushing : 1.5 mm (.059) min. -5.5 mm (.217) max. OPERATING FORCE: TOTAL TRAVEL: PB16 1 / 2 PB16 3 1.5 mm(.59) 2.5 mm(.98) 2N~5N 5.5N+/-1.5N. PB16 1 / 2 PB16 3 CONTACT BOUNCE:10 ms. MECHANICAL LIFE:1,000,000 cycles. TORQUE:1.5 Nm max.applied to nut. HARDWARE M12 PA Nuts Rubber Washer [email protected] Locking Washer Cap www.greatecs.com 3 Pushbutton Switches SPST Sealed Round Pushbutton Switches PB16 Series GENERAL SPECIFICATIONS 1. Style This specification describes “Snap-Acting Pushbutton Switches”,mainly used as signal switch of electric devices, with the general requirements of mechanical and electrical characteristic. Operating Temperature Range -30 ~+85 . 2. Current Range 2.1 Silver Plating Standard Plating Gold over silver Rating Fixed Terminal Copper alloy with silver plated over gold plate. Movable contact Copper alloy with silver plated over gold plate. 3. Type of Actuation Snap-Acting Pushbutton Switches. 4. Test Sequence ELECTRIC PERFORMANCE ITEM DESCRIPTION TEST CONDITIONS 3Amps @120VAC or 28VDC. REQUIREMENTS 1 There shall be no defects By Visual Examination check without that affect the Visual Examination and out pressure & testing. serviceability of the product. 2 @2-4VDC 100mA. For silver plated Contact Resistance contacts. [email protected] 50mΩ Max. www.greatecs.com 4 Pushbutton Switches SPST Sealed Round Pushbutton Switches ELECTRIC PERFORMANCE ITEM DESCRIPTION TEST CONDITIONS PB16 Series REQUIREMENTS 3 Insulation Resistance Measurements shall be made following application of 1000 V/DC 100mA potential across terminals and cover. 1000MΩ min/1000V. 4 Dielectric Withstanding Voltage 1500 VAC(50Hz or 60Hz) shall be applied across terminals and cover for 1 minute. There shall be no breakdown or flashover. MECHANICAL PERFPRMANCE Through Hole Type Wave Soldering Soldering Temperature 260±5 . Duration of Solder Immersion 5 ±1 5 Solder Heat Resistance seconds. PCB is 1.6mm in thickness Manual Soldering Soldering Temperature 350±5 . Duration of Solder Heated 5±1 Shall be free from pronounced backlash and falling-off or breakage terminals. As shown in item 2~4. seconds. 6 Actuation Force MODEL-1305N MECHANICAL TEST 500gram 1000gram 2000gram. OFF TO ON Total Travel At for test the force. Force 2N~5N. Total Travel 1.5 ±0.25 Measurements shall be made following the test forth below OPERATING LIFE 3A,120VAC resistive load silver plated. 7 Operating Life Electronics Life Test: 5,000 cycles. 200mA,50VDC resistive load gold plated. Electronics Life Test: 500,000 cycles. Rate of Operation: 6-8 operation cycles Electronics Life Test As shown in item 3~4. Mechanical Life Test As shown in item 2~4. per minute. 4 Mechanical Life Test: 1,000,000 cycles. [email protected] www.greatecs.com 5 Pushbutton Switches SPST Sealed Round Pushbutton Switches ITEM DESCRIPTION TEST CONDITIONS PB16 Series REQUIREMENTS HUMIDITY RESISTANCE 8 Following the test set forth below the sample shall be left in normal temperature Resistance Low and humidity conditions for 1 hour before As shown in item 2~4. Temperature the measurements are made: Temperature -40±3 . Time 96 hours. 9 Following the test set forth below the sample shall be left in normal temperature Resistance and humidity conditions for an hour As shown in item High before the measurements are made: 2~4. Temperature Temperature 85±3 . Time 96 hours. 10 11 Resistance Humidity Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before the measurements are made: Temperature 40±2 . Relative Humidity 90~95%. Time 96 hours. Contact Resistance 10mΩ Max. Insulation Resistance 1000MΩ min. The Salt Testing Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before the measurements are made Temperature 35±2 . The ratio of salt-water 5%. The spray amout of salt- water 1~2 ml/h. 4 Time 48 hours. The testing standard based on bubble,crack, And magnifying glass with gauge. [email protected] www.greatecs.com 6 Pushbutton Switches SPST Sealed Round Pushbutton Switches ITEM DESCRIPTION TEST CONDITIONS Refer RoHS Standard 12 HSF HUMIDITY RESISTANCE The electronic electrical machinery product limits with six big chemical materials. Upper side 13 Test of IP 67 Protected against the effects of temporary immersion in water. (1m below the surface of the water for a duration of 30 min) 14 WITH LED ELECTRO OPTICAL PB16 Series REQUIREMENTS Cd 100ppm Pb 1000ppm Hg 1000ppm Cr6+ 1000ppm PBB PBDE 1000ppm IP67 According to EN 60529 1991 A1 2000 IEC 60529 2001 2.6 Vf(V) Max. 5. WAVE SOLDERING CONDITIONS [email protected] www.greatecs.com 7 Pushbutton Switches SPST Sealed Round Pushbutton Switches PB16 Series Manual Soldering Soldering Temperature Continuous Soldering Time Max.350 Max.5 seconds Precautions in Handling Care should be exercised so that flux from the upper part of the printed circuit board does not adhere to the switch. [email protected] www.greatecs.com 8