VG95234 Qualified Bayonet-Lock Connectors

VG95234 Qualified
Bayonet-Lock Connectors
Crimp-Contact MIL-DTL-5015 Type Electrical Connectors
for Ruggedized Power and Signal Applications
United States

United Kingdom

Germany

France

Nordic

Italy

Spain

Japan
High Voltage
Electrical Power Distribution
From 0 to 60 in 3.9 Seconds
H
igh voltage electrical power distribution is
a critical component of the 100% electric
Tesla Roadster.
The reliable distribution of electrical energy
from the car’s lithium-ion energy storage system
to the vehicle’s motor, electronic control module,
HVAC system, transmission and regenerative
braking unit depends on a high-performance
wiring system made up of high-temperature
shielded conduit and ruggedized reverse-bayonet
power connectors—all made by Glenair.
Glenair is on the forefront of innovative
efforts to advance the reliability and performance
of electric vehicles. Glenair power connectors,
cables and conduit are deployed in high-voltage
power management and distribution applications
for systems as demanding as military vehicles
––and as fast as the Tesla Roadster.
EU Sales: Glenair Connectors Italia, S.r.L. Tel: +39-02-91082121 Email: [email protected]
North American Sales: Glenair Connecticut, Tel: 203-741-1115 Email: [email protected]
Factory Support: Commital S.p.a. (Italy) Tel: +39-51-7821811 Email: [email protected]
www.glenair.com
Introduction
VG95234
Connectors
VG95234
Bayonet-Lock Assemblies
Product Line Overview
VG95234 Qualified Power and Signal Connectors,
for Military Vehicles.
Harsh Application Environments
Glenair’s VG 95234 Reverse Bayonet Power and Signal Connector is ideally suited for all inter-car,
under-car, trainline and other rugged transportation applications. The connector family is also popularly
applied to industrial and military applications such as ground vehicles and electric cars. Qualified to VG
95234, the reverse bayonet coupling provides easier and faster coupling, especially when the connector
is situated in an awkward or hard to reach location. The connector’s high resistance to vibration and
shock provides reliable mating in even the most rigorous application environments. Environmental
protection to IP67 levels provides additional reliability.
Rugged Materials
Glenair’s VG 95234 connector series is fabricated in aluminum alloy with surface plating IAW QQP416 Type II Class 3. Easy-to-terminate crimp contacts are made from silver plated copper alloy. The
standard insert material is synthetic rubber which provides durable performance in temperature ranges
from -55° to +125°C..
Intermateability
Glenair’s VG 95234 Reverse Bayonet Power and Signal Connector is a reverse bayonet coupling
version of the familiar threaded coupling MIL-DTL-5015. Insert arrangements mimic the 5015 family
of configurations, including a modicum of supported contact sizes, connector types and arrangements.
Glenair’s VG 95234 Connector is interchangeable and intermateable with the wide range of industrystandard reverse bayonet connectors designed around MIL-DTL-5015 and/or qualified to VG 95234.
„
Fast, Easy Bayonet Coupling: 1/4 Turn
„
Environmental and Non-Environmental Versions
„
All Shell Styles: Plug, Square Flange, Jam-Nut, etc.
„
High Shock and Vibration Resistance
„
Contact Sizes from #16 to #0 in more than 63
Insert Arrangements
„
Audible and Visual Coupling Indicators
„
Keyed Polarization
„
Crimp Contacts
„
Intermateable with Glenair ITS Series
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
1
www.glenair.com
Introduction
VG95234
Connectors
VG95234
Bayonet-Lock Assemblies
Applications
VG95234
Glenair’s qualified VG95234 reverse bayonet-lock connector series is based on the MIL-DTL-5015
standard, and shares many of the same insert arrangements, shell dimensions, supported contacts
and electrical performance ratings as MIL-DTL-5015 and Glenair’s commercial equivalent product
line, the Series ITS. The VG95234 3-point bayonet coupling mechanism provides easy mating and
positive locking resistance to vibration, shock, and other connector decoupling forces in general duty
and environmental interconnect systems such as railway cars, locomotives, industrial controls, factory
robotics, military vehicles and other general electronic applications.
Component Materials
VG95234 connectors are available in aluminum alloy and are supplied standard with an olive green
cadmium finish IAW QQ-P-416. Supplied crimp contacts are silver plated copper alloy. Insulators are
high insulation synthetic rubber: -55°C to +125°C.
EMI and Environmental Applications
VG95234 Series connectors
are perfectly suited for use
in rugged applications where
EEC compliance directives for
electromagnetic compatibility
is required. A complete range
of EMI shield termination
accessories are available for both
overall as well as individual wire
shields.
Equipped with the appropriate
backshells and environmental
sealing, the connectors are
submersible for 48 hours up to a
depth of two meters coupled.
Connector Accessories
Many of the VG95234 connectors come already paired with selected backshell accessories for most
application requirements. See the accessory descriptions on the opposite page for more information. A
full range of additional connector accessories including dust caps and EMI gaskets are also available.
Please contact the factory for additional information or any of our worldwide sales and engineering
facilities. Glenair’s website, www.glenair.com also has complete information on these products, as well
as other ruggedized power and signal connectors.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
2
Introduction
VG95234
Connectors
VG95234
Bayonet-Lock Assemblies
Available Components
VG95234 offers a simplified ordering and part number format that combines the five standard connector shell styles with the most popular backshells and connector accessories. Available connector
shell styles, backshell types and accessories include:
VG95234 Connector Shell Styles
•
Front Panel Mount Square Flange Receptacle with Accessory Threads
•
Rear Box Mount Square Flange Receptacle with No Accessory Threads
•
Rear Box Mount Square Flange Through Bulkhead Receptacle
•
Straight and 90° Plug Connector with Accessory Threads
•
In-Line Receptacle
VG95234 Integrated Backshell Types
Type D, E, F, J1 and J2: Basic backshell with cable clamp, bushing and wire
sealing grommet.
Types E1, K, H, and L: Backshell for the termination of flexible wire protection
conduit. Includes wire sealing grommet.
Types G, T, U1 and U2 Simple Heat-Shrink Boot termination backshell. Includes
wire sealing grommet.
Types M, N1, N2, R1, S1 and S2 EMI/RFI shield termination backshell with
external lip for the attachment of for heat shrink boots. Includes wire sealing
grommet.
VG95234 Accessories
•
Plug and receptacle protective covers with various lanyard styles for panel attachment
•
Plug and receptacle covers with various lanyard styles for cable attachment
•
Conductive and non-conductive gaskets for panel mount connectors
•
Dummy stowage receptacles
•
Cable clamps and Neoprene bushing
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
3
www.glenair.com
Introduction
VG95234
Connectors
VG95234 Bayonet-Lock
General Duty Crimp Contact Connector
Cross Reference
The Glenair VG95234 reverse bayonet-lock connector series features a 3 point bayonet coupling
mating interface with stainless steel coupling pins for advanced durability. Resilient closed entry inserts
provide outstanding dielectric performance and environmental protection. Individual wire sealing
grommets elevate the environmental protection rating to IP67. Conductive metal shells and plating
provide a reliable ground plane for EMI applications when connectors are combined with appropriate
shield termination backshells. Ground springs are also available in selected plug versions to further
enhance EMC. Shells are keyed with three total alternate key positions. VG95234 consists of:
•
•
•
•
•
•
15 styles of connectors/accessory assemblies
10 shell sizes
6 contact Sizes: #16, #12, #8, #4 and #0 in standard AWG. #10, #15, #25, #100-60, #160, and
#500 in metric.
63 insert Arrangements with 1 to 61 contacts
Connector Cross Reference
Standard contacts: Crimp
Glenair
VG95234
5 Available alternate insert rotations
Connectors
Series ITS
VG95234 A
ITB 4102 A
VG95234 B1
ITB 4103 A
VG95234 B2
ITB 4103 AFP
VG95234 C1
ITB 4102 PP
VG95234 C2
ITS 4102 PPFP
VG95234 D
ITS 4106 FV
VG95234 E
ITS 4108 F
VG95234 E1
ITS 4108 R
VG95234 K
ITS G 4108 R
VG95234 F
ITB 4101 FV
VG95234 G
ITS 4106 GR
VG95234 T
ITS G 4106 GR
VG95234 H
ITS 4106 R
Glenair
Series ITS
VG95234 L
ITS G 4106 R
VG95234 J1
ITB 41030 FV
VG95234 KB
ITB 06T
VG95234 J2
ITB 41030 FP FV
VG95234 KR
ITB 02T
VG95234 M
ITS G 4106 SP
VG95234 B 0D
ITS 05
VG95234 N1
ITB 41030 SP
VG95234 KK
IT 3057
VG95234 N2
ITB 41030 SPFP
VG95234 KT
IT 3420
VG95234 R1
N.A.
VG95234 DA-1
IT 40450
VG95234 S1
N.A.
VG95234 DA-2
IT 40450 S
VG95234 S2
N.A.
VG95234 DH-1
IT 40460
VG95234 U1
ITB 41030 GR
VG95234 DH-2
IT 40460 S
VG95234 U2
ITB 41030 GR FP
The Glenair Series ITS connector family is
the company’s commercial equivalent for the VG
qualified products presented in this catalog. Series
ITS offers a much broader range of connector and
backshell assemblies as well as additional plating
options, fire-resistant inserts, optional solder-cup
contacts and other variations. Customers are advised
to select VG95234 versions of this reverse-bayonet
connector series when qualification to VG95234 is a
requirement. For non-VG applications, customers will
appreciate the broader range of options available in
the Series ITS.
Accessory Cross Reference
VG95324
Accessories
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
4
Introduction
VG95234
Connectors
VG95234
Bayonet-Lock Crimp Contact Connector
Technical Data
Contact Information
Metric
AWG
10
Rated Current
at 20°C
Max. Contact
Resistance
MM2
Wire Size
AWG
7.5A
12.0MΩ
0.75 - 1
15S - 15
16S - 16
22.0A
6.0MΩ
1 - 1.5
16
25A - 25
12
41.0A
3.0MΩ
2.5
12
60
6
100
73.0A
1.0MΩ
10
8
160
4
500
0
8
135.0A
0.5MΩ
245.0A
0.2MΩ
16
4
50
0
Rated Current (Amp)
Service Rating
Class
Minimum
Contact
Spacing
Test Voltage
Vac RMS
1
2
0.7 mm
1.1 mm
1050 V
1600 V
3
2.8 mm
2500 V
4
4.8 mm
3000 V
Insulation Resistance:
≥ 5 x 103 MΩ
Ambient Temperature C°
Attenuation (dB)
Shield Attenuation For Connector Styles K, L, M, R1 and T
Frequency (MHz)
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
5
www.glenair.com
Introduction
VG95234
Connectors
VG95234 Bayonet-Lock
General Duty Crimp Contact (MIL-C-5015 Type)
Master How to Order
Contact
Arrangement
VG95234
Basic Part Number
A
1 - Standard AWG Contacts
(Omit for Metric)
32-6
S
1
P - Pin contacts
S - Socket contacts
P/S - For Style C1 and C2
Bulkhead Feed-Thru
N
Alternate Insert
Positions
N-X-Y
Connector Style
A - Front Panel Mount Square Flange Receptacle—No Accessory Threads
B1 - Rear Panel Mount Square Flange Receptacle—Threaded Holes
B2 - Rear Panel Mount Square Flange Receptacle—Thru Holes
CI - Bulkhead Feed-Thru Receptacle with Threaded Holes
C2 - Bulkhead Feed-Thru Receptacle with Thru Holes
D - Straight Plug with Cable Clamp and Bushing
E - 90° Plug with Cable Clamp and Bushing
E1 - 90° Plug without Clamp and Bushing
K - 90° Plug with Grounding Fingers without Cable Clamp and Bushing
F - In-Line Receptacle with Cable Clamp and Bushing
G - Straight Plug with Shrink Boot Adapter
T - Straight Plug with Shrink Boot Adapter and Grounding Fingers
H - Straight Plug without Cable Clamp and Bushing
L - Straight Plug with Grounding Fingers without Cable Clamp and Bushing
J1 - Wall Mount Receptacle with Cable Clamp, Bushing and Threaded Holes
J2 - Wall Mount Receptacle with Cable Clamp, Bushing and Thru Holes
M - Straight Plug with EMI Shrink boot Backshell and Grounding Fingers
N1 - Wall Mount Receptacle with EMI Shrink boot Backshell & Threaded Holes
N2 - Wall Mount Receptacle with EMI Shrink boot Backshell & Thru Holes
R1 - Straight Plug for use with VG95218 Wires—EMI/Shrink boot Backshell
S1 - Wall Mount Connector for VG95218 Wires—EMI/Boot Backshell; Threaded
S2 - Wall Mount Connector for VG95218 Wires—EMI/Boot Backshell; Thru Holes
U1 - Wall Mount Connector—Shrink boot Backshell; Threaded Holes
U2 - Wall Mount Connector—Shrink boot Backshell; Thru Holes
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
6
Introduction
VG95234
Connectors
Glenair Series ITS
Commercial Equivalent Product Line
Connector/Backshell Class
A - Non-Environmental
GR, SP - Environmental (Includes Wire
Sealing Grommet)
FV, F, R, RS - Environmental (Includes Wire
Sealing Grommet and Compression Ring)
Shell Size
and
Insert
Arrangement
Reverse Bayonet
Coupling Connector
ITB for the
Receptacle
Contact
Gender
Omit for
Standard
Mod
Code
Option
P - Pin
S - Socket
ITS G 41 00 A FK 20-27 P
Contact
Plug
Type
Grounding
Fingers
41 - Crimp
Accessory
Description
Code
Material Option
FK - Stainless Steel
Passivate
MB - Marine Bronze
Omit - For Standard
Aluminum
Y N0 CRA XXX
Alternate
Insert
Rotation
CRA - AWG Contact
CRM - Metric Contacts
Omit for
Normal
Connector Shell Styles
00 - Front Panel Mount Square Flange Receptacle with Accessory Threads
01 - In-Line Cylindrical Receptacle with Accessory Threads
02 - Front Panel Mount Square Flange Receptacle—No Accessory Threads
03 - Rear Panel Mount Square Flange Receptacle—No Accessory Threads
030 - Rear Panel Mount Square Flange Receptacle with Accessory Threads
038 - Rear Panel Mount Square Flange Receptacle with 90° Backshell
05 - Dummy Receptacle
06 - Straight Cylindrical Plug Connector with Accessory Threads
07 - Rear Panel Mount Jam Nut Receptacle—No Accessory Threads
070 - Rear Panel Mount Jam Nut Receptacle with Accessory Threads
078 - Rear Panel Mount Jam Nut Receptacle with 90° Backshell
08 - Cylindrical Plug Connector with 90° Backshell
26 - Square Flange Panel Mount Plug
TB - Solid Contact Bulkhead Feed Through
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
7
www.glenair.com
Introduction
VG95234
Connectors
VG95234
Pin Contact Arrangements
PIN CONTACTS
Contact
Arrangements
• 10SL - 3
• 10SL - 4
12SA - 10
14S - 2
14S - 5
• 14S - 6
14S - 7
• 16S - 1
16S - 4*
16 - 7*
16 - 9
• 16 - 10
• 16 - A11
• 16 - 12
• 18 - 1
18 - 3
18 - 6
18 - 9*
18 - 11
18 - 13*
18 - 21
• 20 - 2
20 - 3
• 20 - 8
20 - 16
20 - 18
20 - 22
20 - 23
20 - 27
20 - 29
• 20 - A9
• 20 - A48
• 22 - 2
22 - 12
• 22 - 14
22 - 15
22 - 19
• 22 - 22
22 - 23
22 - 28
• 22 - B22
• 22 - 27
24 - 9
• 24 - 10
• 24 - 11
Service
Rating
2
2
1
1
1
1
2
2
3
2
2
2
2
2
1
3
3
1
2
2
2
3
3
1
2
2
2
2
2
2
1
1
3
3
2
2
2
2
2
2
2
2
2
2
2
500
160
Contact Size
Metric Type
100-60 25-25A 15S-15 10
0
1
2
3
2
4
3
2
4
4
5
6
3
7
2
2
2
AWG Type
8
12
1
16S-16
2
1
10
2
1
1
1
2
5
3
3
3
5
1
3
2
2
3
3
2
4
7
6
3
3
3
2
14
17
9
19
3
2
5
14
3
19
1
4
8
7
4
1
3
8
2
7
3
6
3
6
* Consult factory
• VG Qualified
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
8
Introduction
VG95234
Connectors
VG95234
Contact Arrangements
and Sealing Plugs
PIN CONTACTS
Contact
Arrangements
• 24 - 12
24 - 30
24 - 22
24 - 28
28 - 09
• 28 - 11
28 - 12
• 28 - 20
• 28 - 21
• 28 - 22
• 28 - A63
• 32 - 1
• 32 - 3
• 32 - 5
• 32 - 6
• 32 - 7
32 - 17
• 32 - A55
32 - A69
• 36 - 3
• 36 - 5
• 36 - 6
• 36 - 10
Service
Rating
2
3
3
1
2
2
2
2
2
3
1
3
3
3
2
1
3
2
1
3
2
2
2
500
160
Contact Size
Metric Type
100-60 25-25A 15S-15 10
0
2
4
AWG Type
8
12
2
3
9
4
4
24
5
18
26
4
37
3
19
2
4
10
3
9
3
2
2
1
2
2
2
16S-16
3
2
7
4
5
3
3
2
16
28
2
4
3
3
2
4
2
16
4
55
20
3
4
41
3
3
4
2
3
4
48
* Consult factory
• VG Qualified
SEALING PLUGS
L1
L1
D2
D1
L2
SEALING PLUG DIMENSIONS
Part
Number
Contact Size
Metric
AWG
VG95234 B20
10
VG95234 B16 15S - 15
VG95234 B12 25A - 25
VG95234 B8 60 - 100
VG95234 B4
160
VG95234 B0
500
© 2008 Glenair, Inc.
8
4
0
D1
±0.1
D2
±0.2
L1
±0.1
L2
±0.3
Color
2.3
2.8
3.7
5.0
7.6
12.8
3.0
3.7
4.6
5.8
8.5
13.5
2.4
3.2
3.2
3.2
3.2
3.2
9.7
11.9
11.9
11.9
11.9
11.9
Red
Blue
Yellow
White
Green
Black
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
9
www.glenair.com
Introduction
VG95234
Connectors
VG95234
Contact Arrangements
Front View of Pin Insert
1 CONTACT
ARRANGEMENT :
CONTACT SIZE :
Metric
AWG
SERVICE RATING :
16-12
160
20-2
500
2
3
18-6
18-6
4160
4
D3
2 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
10SL-4
15S
Metric
AW G
SERVICE RATING :
16S-4
16S-4
1 6 - A 11
pin 25A / socket 25
16S-4
15S
15S
16
D333
2
24-9
18-3
18-3
25
12
4
2
2
3D
2 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
2 CONTACTS
SERVICE RA:TING :
ARRANGEMENT
CONTACT SIZE :
Metric
AW G
SERVICE RATING :
20-23
8
20-23
A
60
32-5
32-5
0500
D0
8
2
3
3 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
14S-7
16-7
14S-7
215S
/ 15 , 1 / 100
16
0
A
22
10SL-3
15S
Metric
AWG
SERVICE RATING :
2
C
C
16-10
25
20-3
20-3
1252
D
3
22-2
8
3
2
A
A
3 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
ARRANGEMENT :
SERVICE
RAT:ING :Metric
CONTACT
SIZE
AW G
SERVICE RATING :
B
B
16-7
16-7; 2/15
1/100
1/8,; 2/16
2/16
1/8
2A
500
© 2008 Glenair, Inc.
160
18-21
25
2
Contact Size
Metric Type
100-60 25-25A 15S-15 10
0
U.S. CAGE Code 06324
4
AWG Type
8
12
16S-16
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
10
Introduction
VG95234
Connectors
VG95234
Contact Arrangements
Front View of Pin Insert
A
D
4 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
B
C
Metric
AWG
SERVICE RATING :
16-9
2/12
16-9
1 8 - 1,3 2/16
2/25
5 , 1 / 60
A3 / ;22/15
22-22
100
22-B22
60
22
2
2
36-5
500
0
2
D
18-13*
1/8,
3/12
18-13*
A 1/60 ; 3/25
1/8 ; 3/12
2
A
4 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
C
ARRANGEMENT
SERVICE RATIN: G :
CONTACT SIZE :
Metric
AW G
SERVICE RATING :
24-22
24-22
860
8
D
3
32-17
32-17
4 160
4
D
3
14S-2
14S-2
115S
6
I
B
12SA-10
15S
1
1
5 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
18-11
25
Metric
AWG
SERVICE RATING :
2
500
© 2008 Glenair, Inc.
22-12
3 / 15 , 2 / 100
3
160
24-12
3 / 12 , 2 / 4
2
Contact Size
Metric Type
100-60 25-25A 15S-15 10
0
U.S. CAGE Code 06324
4
32-1
3 / 25 , 2 / 500
3 / 12 , 2 / 0
Balance=3
A=4;B
-E=3
AWG Type
8
12
14S-5
16
I14S-5
15S
1
16S-16
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
11
www.glenair.com
Introduction
VG95234
Connectors
VG95234
Contact Arrangements
Front View of Pin Insert
6 CONTACTS
ARRANGEMENT :
14S-6
20-8
222-15*
8-22
1
3 / 16 , 3
3D=4 ; Balance=2
5/25 ; 1/15
AW G
SERVICE RATING :
1
6 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
36-6
Metric
AW G
20-22
3/60 ; 3/15
4/4,2/0
2
SERVICE RATING :
36-3
3/500 ; 3/25
3/0 ; 3/12
3
2
28-22
3/160 ; 3/15
3/4 ; 3/16
3
7 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
Metric
AW G
SERVICE RATING :
16S-1
15S
18-9
18-9
18-9
2/12
, 5/16
2/25
5 /; 5/15
15
, 2 / 25
I
24-10
100
2
1 1
2
22-28
22-28
1252
A
2
89 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
22-23
25
Metric
AWG
SERVICE RATING :
H=4 ; Balance=2
500
© 2008 Glenair, Inc.
160
Contact Size
Metric Type
100-60 25-25A 15S-15 10
0
U.S. CAGE Code 06324
4
AWG Type
8
12
16S-16
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
12
Introduction
VG95234
Connectors
VG95234
Contact Arrangements
Front View of Pin Insert
9 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
Metric
AWG
SERVICE RATING :
20-A9
25
22-27
8 / 15 , 1 / 60
A
=1;J=3
J=3- H
; Balance=1
A
-H
=2;J=3
J=3
; Balance=2
24-11
6 / 25 , 3 / 100
6 / 12 , 3 / 8
2
32-3
4 / 16 , 2 / 12 , 2 / 4 , 1 / 0
3
9 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
Metric
AWG
SERVICE RATING :
20-16
2/25 ; 7/15
20-18
3/25 ; 6/15
28-09
4/160 ; 5/15
4/4 ; 5/16
2
2
2
11 CONTACTS
10 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
Metric
AWG
SERVICE RATING :
18-1
15
ARRANGEMENT :
CONTACT SIZE :
A,D,E,H,I,J=1;
B,C,F,G=2
SERVICE RATING :
14 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
Metric
AWG
24-20
2/25 ; 9/15
3
17 CONTACTS
Metric
AWG
SERVICE RATING :
500
© 2008 Glenair, Inc.
28-20
4 / 15 , 10 / 25
20-27
15
22-19
15
ARRANGEMENT :
CONTACT SIZE :
2
2
2
SERVICE RATING :
160
Contact Size
Metric Type
100-60 25-25A 15S-15 10
0
U.S. CAGE Code 06324
4
AWG Type
8
12
Metric
AWG
20-29
15
2
16S-16
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
13
www.glenair.com
Introduction
VG95234
Connectors
VG95234
Contact Arrangements
Front View of Pin Insert
19 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
Metric
AW G
SERVICE RATING :
20-A48
15
22-14
15
1
2
22 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
23 CONTACTS
2 8 - 11
18 / 15 , 4 / 25
Metric
AW G
SERVICE RATING :
2
24 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
32-6
16 / 15 , 2 / 25 , 3 / 60 , 2 / 160
16 / 16 , 2 / 12 , 3 / 8 , 2 / 4
2
26 CONTACTS
Metric
AW G
SERVICE RATING :
24-28
24 / 15
ARRANGEMENT :
CONTACT SIZE :
1
SERVICE RATING :
Metric
AWG
28-12
15 19
2
28 CONTACTS
28-A63
19 / 15 , 9 / 25
E = 2; Balance=1
; Bal. = 1
E=2
500
© 2008 Glenair, Inc.
160
Contact Size
Metric Type
100-60 25-25A 15S-15 10
0
U.S. CAGE Code 06324
4
AWG Type
8
12
16S-16
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
14
Introduction
VG95234
Connectors
VG95234
Contact Arrangements
Front View of Pin Insert
35 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
37 CONTACTS
Metric
AWG
SERVICE RATING :
32-7
28 / 15 , 7 / 25
28-21
15
A,
A ,B,
B ,H,
H J=1
, J =;1Balance=2
; Bal. = 2
2
48 CONTACTS
ARRANGEMENT :
CONTACT SIZE :
61
55CONTACTS
CONTACTS
Metric
AWG
SERVICE RATING :
36-10
15
ARRANGEMENT :
CONTACT SIZE :
2
SERVICE RATING :
Metric
AWG
32-A55 °
32-A69
4115/ 10 , 20 / 15
12
61 CONTACTS
32-A69 °
41 / 10 , 20 / 15
1
° Not for connectors style C1 and C2
500
© 2008 Glenair, Inc.
160
Contact Size
Metric Type
100-60 25-25A 15S-15 10
0
U.S. CAGE Code 06324
4
AWG Type
8
12
16S-16
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
15
www.glenair.com
Introduction
VG95234
Connectors
VG95234
Pin Contacts
Pin Contact
D1
L2
L3
D3
D2
D4
D5 D6
L4
L1
PIN CONTACTS
Contact Size
VG Part Number
Part Number
VG95234P10-002
VG95234P10-001
VG95234P15S-003
VG95234P15S-001
VG95234P15S-002
VG95234P15-003
VG95234P15-001
VG95234P15-002
VG95234P25-002
VG95234P25-001
VG95234P25A-001
VG95234P60-002
VG95234P60-001
VG95234P100-001
VG95234P8-001
VG95234P160-002
VG95234P160-001
VG95234P4-001
VG95234P500-003
VG95234P500-001
VG95234P500-002
VG95234P0-001
10-234-10P
10-234-10P-001
10-234-15SP
10-234-15SP-001
10-234-15SP-002
10-234-15P
10-234-15P-001
10-234-15P-002
10-234-25P
10-234-25P-001
10-234-25AP
10-234-60P
10-234-60P-001
10-234-100P
10-234-8P
10-234-160P
10-234-160P-001
10-234-4P
10-234-500P
10-234-500P-001
10-234-500P-002
10-234-0P
© 2008 Glenair, Inc.
D1
Color
Code Metric AWG +0
-0.2
Blue
10
D2
D3
D4
D5
+0
+0 +0.15 +0
-0.5 -0.15 -0
-0.1
2.00 1.04 1.50
Blue
Red
15S
16S
3.20 1.60 1.75
Blue
Red
15
16
3.20 1.60 1.75
25
12
4.80 2.40 3.30
Black
Yellow
Green
25
4.80 2.40 3.30
60
7.60 3.60 6.25
100
8
Brown
160
11.20 5.75 9.55
4
White
Grey
7.60 3.60 6.25
7.60 3.60 6.25
500
11.20 5.75 9.55
15.15 9.10 13.55
0
15.15 9.10 13.55
U.S. CAGE Code 06324
1.50
0.90
1.75
0.90
1.20
1.75
0.90
1.20
2.50
1.75
2.50
3.50
2.50
4.80
4.55
6.20
5.70
7.10
10.70
7.60
9.10
11.50
D6
L1
L2
L3
L4
+0
±0.2 ±0.15 ±0.1 Min.
-0.2
2.40 2.60 28.4
11.3
4.75
4.6
2.75 3.20 27.4 13.9
3.85
6.8
2.75 3.20 31.4 13.9
7.90
6.8
3.80
4.80 37.0 18.3
3.40
3.80 4.80 33.9 15.2
7.90
6.8
7.90
6.8
6.80 7.60 39.6 20.0
6.35 12.0
6.80 7.60 39.6 20.0
6.80 7.60 39.6 20.0
6.35 12.0
6.35 12.0
9.55 11.20 39.6 20.0
6.35 12.0
9.55 11.20 39.6 20.0
6.35 12.0
14.35 15.15 41.0 20.0
6.35 14.0
14.35 15.15 41.0 20.0
6.35 14.0
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
16
Introduction
VG95234
Connectors
VG95234
Socket Contacts
Socket Contact
D1
L2
L3
D2
D4
D3
D5 D6
L4
L1
SOCKET CONTACTS
Contact Size
VG Part Number
Part Number
VG95234S10-002
VG95234S10-001
VG95234S15S-003
VG95234S15S-001
VG95234S15S-002
VG95234S15-003
VG95234S15-001
VG95234S15-002
VG95234S25-002
VG95234S25-001
VG95234S60-002
VG95234S60-001
VG95234S100-001
VG95234S8-001
VG95234S160-002
VG95234S160-001
VG95234S4-001
VG95234S500-003
VG95234S500-001
VG95234S500-002
VG95234S0-001
10-234-10S
10-234-10S-001
10-234-15SS
10-234-15SS-001
10-234-15SS-002
10-234-15S
10-234-15S-001
10-234-15S-002
10-234-25S
10-234-25S-001
10-234-60S
10-234-60S-001
10-234-100S
10-234-8S
10-234-160S
10-234-160S-001
10-234-4S
10-234-500S
10-234-500S-001
10-234-500S-002
10-234-0S
© 2008 Glenair, Inc.
D1
Color
Code Metric AWG +0
-0.2
Blue
10
D2
D3
D4
D5
+0
+0 +0.15 +0
-0.5 -0.15 -0
-0.1
2.00 1.04 1.50
Blue
Red
15S
16S
3.20 1.60 1.75
Blue
Red
15
16
3.20 1.60 1.75
25
12
4.80 2.40 3.30
Black
Yellow
Green
60
7.60 3.60 6.25
100
8
Brown
160
11.20 5.75 9.55
4
White
Grey
7.60 3.60 6.25
7.60 3.60 6.25
500
11.20 5.75 9.55
15.15 9.10 13.55
0
15.15 9.10 13.55
U.S. CAGE Code 06324
1.50
0.90
1.75
0.90
1.20
1.75
0.90
1.20
2.50
1.75
3.50
2.50
4.80
4.55
6.20
5.70
7.10
10.70
7.60
9.10
11.50
D6
L1
L2
L3
L4
+0
±0.2 ±0.15 ±0.1 Min.
-0.2
2.40 2.60 28.4
11.3
4.75
4.6
2.75 3.20 27.4 13.9
3.85
6.8
2.75 3.20 31.4 13.9
7.90
6.8
3.80
4.80 37.0 18.3
3.40
7.90
6.8
6.80 7.60 39.6 20.0
6.35 12.0
6.80 7.60 39.6 20.0
6.80 7.60 39.6 20.0
6.35 12.0
6.35 12.0
9.55 11.20 39.6 20.0
6.35 12.0
9.55 11.20 39.6 20.0
6.35 12.0
14.35 15.15 41.0 20.0
6.35 14.0
14.35 15.15 41.0 20.0
6.35 14.0
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
17
www.glenair.com
Introduction
VG95234
Connectors
VG95234
Contact Arrangements
and Alternate Key Position
Contact Arrangements Table
Contact
Arrangments
10SL - 3
10SL - 4
12SA - 10
14S - 2
14S - 5
14S - 6
14S - 7
16S - 1
16S - 4 *
16 - 7 *
16 - 9
16 - 10
16 - A11
16 - 12
18 - 1
18 - 3
18 - 6
18 - 9 *
18 - 11
18 - 13 *
18 - 21
20 - 2
20 - 3
20 - 8
20 - 16
20 - 18
20 - 23
20 - 27
20 - 29
20 - A9
20 - A48
22 - 2
22 - 12
22 - 14
Degrees
W
X
120
110
Y
240
90
90
80
180
270
35
110
110
110
180
110
250
250
250
270
250
35
80
70
80
35
35
35
80
80
Z
280
145
110
180
110
170
110
325
250
325
250
265
250
280
145
110
110
110
110
110
215
250
250
250
250
250
290
110
80
145
110
110
250
280
215
250
250
280
325
325
325
280
280
Tolerance
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 1° 30'
± 1° 30'
± 2°
Contact
Arrangments
22 - 15
22 - 19
22 - 22
22 - 23
22 - 28
22 -B22
22 - 27
24 - 9
24 - 10
24 - 11
24 - 12
24 - 20
24 - 22
24 - 28
28 - 09
28 - 11
28 - 12
28 - 20
28 - 21
28 - 22
28 - A63
32 - 1
32 - 3
32 - 5
32 - 6
32 - 7
32 - 17
32 - A55
32 - A69
36 - 3
36 - 5
36 - 6
36 - 10
Degrees
W
80
80
X
110
110
110
Y
250
250
250
250
110
110
250
250
250
110
110
110
110
110
110
110
180
110
110
145
100
110
110
110
110
125
110
110
110
145
120
110
125
250
250
250
250
250
250
250
270
250
250
215
260
250
250
250
250
235
250
250
250
215
240
250
235
35
80
35
80
80
45
80
80
80
90
70
35
45
80
70
Z
280
280
280
325
280
280
280
280
280
290
325
280
290
Tolerance
± 2°
± 2°
± 1° 30'
± 2°
± 2°
± 1° 30'
± 1° 30'
± 1° 30'
± 1° 30'
± 1° 30'
± 1° 30'
± 2°
± 2°
± 1° 30'
± 2°
± 1° 30'
± 2°
± 1° 30'
± 1° 30'
± 1° 30'
± 1° 30'
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 2°
± 1° 30'
± 1° 30'
± 1° 30'
± 1° 30'
± 1° 30'
* Consult the Factory
Normal position
© 2008 Glenair, Inc.
Alternate position
with socket contacts
U.S. CAGE Code 06324
Alternate position
with pin contacts
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
18
VG95234
Connectors
VG95234
Bayonet Lock Assemblies
Maximum Panel Thickness and Panel Cut-Out Mounting Data
Maximum Panel Thickness
%&
Panel
Connectors
for Rear
Pa ne lThickness
thickne ssfor
fo rType
typ eA00,
02 co nne(Used
cto rs use
d fo rMounting)
re a r mo unting
G us c io
16S
18
24
28
14S
20
22
10S L
S he ll s ize
16
3,70
3,70
3,70
3,70
3,70
3,70
5,25
5,25
A
Sp e sso re p a nne llo p e r co nne tto ri tip o 02PP, 03, 030, e 038 (co n fo ri file tta ti)
Panel
C, J, N,
U Connectors
forrsRear
Pa ne Thickness
l thickne ssfor
fo rType
typ eB,02PP,
03,S,030
a nd 038 co(Used
nne cto
(withMounting)
thre a d e d ho le s)
G us c io
16S
14S
18
20
22
24
28
10S L
S he ll s ize
16
7,20
7,20
7,20
7,50
7,50
7,50
7,50
7,50
A
32
36
40
6,10
6,10
6,00
32
36
40
7,50
7,50
7,50
32
36
40
48,5
44,5
4,5
55,0
49,2
4,5
61,0
55,5
4,5
32
36
40
54,3
44,5
5,5
60,5
49,2
5,5
66,4
55,5
5,5
OT
OC
=
=
qR
Dimensioni di foratura per connettori tipo 00, 02 e 26 (montaggio fronte pannello)
Panel
fortype
Type00,
A Connectors
(Front Panel
PanelCut-Out
cutout for
02, 26 connectors
(frontMounting)
panel mounting)
Guscio
16S
18
20
24
28
14S
22
10SL
Shell size
16
ØC
17,0
20,0
23,0
26,5
30,0
33,0
36,0
42,0
R ±0,1
18,2
23,0
24,6
27,0
29,4
31,8
34,9
39,7
ØT
3,4
3,4
3,4
3,4
3,4
3,4
3,9
3,9
Dimensioni di foratura per connettori tipo 02 PP, 03 e 030 (montaggio retro pannello)
Panel
fortype
Type02PP,
B, C, J,
N,030
S, Uconnectors
Connectors(rear
(Rearpanel
Panelmounting)
Mounting)
PanelCut-Out
cutout for
03,
Guscio
16S
14S
18
20
22
24
28
10SL
Shell size
16
ØC
19,1
25,5
28,3
31,7
35,0
38,3
41,8
47,6
R ±0,1
18,2
23,0
24,6
27,0
29,4
31,8
34,9
39,7
ØT
4,5
4,5
4,5
4,5
4,5
4,5
4,5
5,5
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
19
www.glenair.com
VG95234
Connectors
VG95234 A
Front Panel Wall Mount Receptacle
Contact
Arrangement
Basic Part Number
VG95234
A
32-6
A - Front
Panel Mount
Receptacle
L2
1 - Standard AWG Contacts
(Omit for Metric)
S
1
Alternate Insert
Positions
N-X-Y
P - Pin contacts
S - Socket contacts
L3
D2
N
E
D1
ØA
L1
L4
APPLICATION NOTES
1.
Front panel mount square flange receptacle—no accessory
threads. Through mounting holes.
4.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
6.
All dimensions are metric unless otherwise noted.
3.
Insert arrangements IAW VG95234. Please see pages 10-15.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
20
VG95234
Connectors
VG95234 A
Front Panel Wall Mount Receptacle
DIMENSIONS
Shell
Size
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
ØA
+0
-0.15
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
D1
Max
D2
H13
E
±0.1
L1
±0.3
16.2
19.2
22.4
22.4
25.6
29.0
32.2
35.3
41.4
47.8
54.1
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.7
3.7
4.3
4.3
18.2
23.0
24.6
24.6
27.0
29.4
31.8
35.9
39.7
44.5
49.2
24.7
24.7
24.7
33.8
33.8
33.8
33.8
33.8
33.8
33.8
33.8
L2
+0.4
-0
14.2
14.2
14.2
19.0
19.0
19.0
19.0
20.6
20.6
22.2
22.2
MATERIALS
L3
±0.2
L4
±0.3
Weight
gr.
Max
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
12
17
19
22
28
33
38
46
52
64
80
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
CRIMP CONTACTS
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Copper Alloy with Silver Plating Over Nickel
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
21
www.glenair.com
VG95234
Connectors
VG95234 B1 and VG95234 B2
Rear Panel Wall Mount Receptacle
with Threaded (B1) and Thru-Holes (B2)
1 - Standard AWG Contacts
(Omit for Metric)
Contact
Arrangement
Basic Part Number
VG95234
B1
32-6
Rear Panel Mount
Receptacle with...
B1 - Threaded Holes
B2 - Thru Holes
L2
S
1
Alternate Insert
Positions
N-X-Y
P - Pin contacts
S - Socket contacts
L3
D2
N
E
D1
ØA
L1
L4
VG95234 B2
D2
APPLICATION NOTES
1.
Rear panel mount square flange receptacle—no accessory
threads. Threaded or through mounting holes.
4.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
6.
All dimensions are metric unless otherwise noted.
3.
Insert arrangements IAW VG95234. Please see pages 10-15.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
22
VG95234
Connectors
VG95234 B1 and VG95234 B2
Rear Panel Wall Mount Receptacle
with Threaded (B1) and Thru-Holes (B2)
DIMENSIONS
D2
Shell
Size
ØA
+0
-0.15
D1
Max
B1
B2
H13
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
16.2
19.2
22.4
22.4
25.6
29.0
32.2
35.3
41.4
47.8
54.1
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.7
3.7
4.3
4.3
E
±0.1
L1
±0.3
L2
+0.4
-0
L3
±0.2
L4
±0.3
Weight
gr.
Max
18.2
23.0
24.6
24.6
27.0
29.4
31.8
35.9
39.7
44.5
49.2
24.7
24.7
24.7
33.8
33.8
33.8
33.8
33.8
33.8
33.8
33.8
18.2
18.2
18.2
23.05
23.05
23.05
23.05
23.05
24.05
24.05
24.05
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
14
21
22
27
33
37
42
48
58
72
84
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
CRIMP CONTACTS
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Copper Alloy with Silver Plating Over Nickel
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
23
www.glenair.com
VG95234
Connectors
VG95234 C1 and VG95234 C2
Bulkhead Feed-Thru Receptacle
with Threaded (C1) and Thru-Holes (C2)
Basic Part Number
VG95234
1 - Standard AWG Contacts
(Omit for Metric)
Contact
Arrangement
C1
32-6
Bulkhead Feed-Thru with...
C1 - Threaded Holes
C2 - Thru Holes
L2
P/S
1
Alternate Insert
Positions
N-X-Y
P/S - Pin/Socket
Solid Contacts
L3
D2
N
E
O-ring
ØA
L1
L4
VG95234 C2
D2
APPLICATION NOTES
1.
Bulkhead feed-thru receptacle with threaded or through
mounting holes.
4.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
2.
Solid contact material consists of copper alloy with silver
plating. Please see pages 16-17 for additional contact
information.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
6.
All dimensions are metric unless otherwise noted.
3.
Insert arrangements IAW VG95234. Please see pages 10-15.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
24
VG95234
Connectors
VG95234 C1 and VG95234 C2
Bulkhead Feed-Thru Receptacle
with Threaded (C1) and Thru-Holes (C2)
DIMENSIONS
D2
Shell
Size
ØA
+0
-0.15
B1
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
B2
H13
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.7
3.7
4.3
4.3
E
±0.1
L1
±0.3
L2
+0.4
-0
L3
±0.2
L4
±0.3
Weight
gr.
Max
18.2
23.0
24.6
24.6
27.0
29.4
31.8
35.9
39.7
44.5
49.2
37.5
37.5
37.5
51.4
51.4
51.4
51.4
51.4
51.4
51.4
51.4
14.2
14.2
14.2
19.0
19.0
19.0
19.0
20.6
20.6
22.2
22.2
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
17
29
34
41
49
56
61
65
76
92
103
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
CRIMP CONTACTS
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Copper Alloy with Silver Plating Over Nickel
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
25
www.glenair.com
VG95234
Connectors
VG95234 D
Straight Plug with Cable Clamp,
Bushing and Wire Sealing Grommet
Contact
Arrangement
Basic Part Number
VG95234
D
1 - Standard AWG Contacts
(Omit for Metric)
32-6
P
1
P - Pin contacts
S - Socket contacts
D - Straight Plug
with Cable Clamp
and Bushing
D2
L2
N
Alternate Insert
Positions
N-X-Y
L3
D1
L1
APPLICATION NOTES
1.
Straight plug connector complete with wire sealing grommet,
cable clamp and bushing.
4.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
6.
All dimensions are metric unless otherwise noted.
3.
Insert arrangements IAW VG95234. Please see pages 10-15.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
26
VG95234
Connectors
VG95234 D
Straight Plug with Cable Clamp,
Bushing and Wire Sealing Grommet
DIMENSIONS
Shell
Size
D1
Max
D2
Max
L1
Max
L2
Max
L3
Max
Weight
gr.
Max
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
22.8
29.2
32.0
32.0
36.5
39.9
43.1
46.6
53.4
60.1
66.3
6.5
9.0
11.0
11.0
14.2
15.8
15.8
21.4
21.4
26.7
31.7
115
115
115
120
120
120
120
120
120
120
130
58
60
60
70
75
75
75
90
90
90
100
22.7
27.5
30.0
30.0
33.0
37.5
37.5
43.3
48.0
55.0
58.0
30
44
54
62
70
85
92
127
154
199
260
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Silver Plating Over Nickel
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
27
www.glenair.com
VG95234
Connectors
VG95234 E
90° Plug with Cable Clamp,
Bushing and Wire Sealing Grommet
VG95234
1 - Standard AWG Contacts
(Omit for Metric)
Contact
Arrangement
Basic Part Number
E
32-6
P
1
P - Pin contacts
S - Socket contacts
E - 90° Plug
with Cable Clamp
and Bushing
L1
N
Alternate Insert
Positions
N-X-Y
D1
L2
L3
L4
D2
APPLICATION NOTES
1.
90° Plug connector with wire sealing grommet, cable clamp
and bushing.
4.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
6.
All dimensions are metric unless otherwise noted.
3.
Insert arrangements IAW VG95234. Please see pages 10-15.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
28
VG95234
Connectors
VG95234 E
90° Plug with Cable Clamp,
Bushing and Wire Sealing Grommet
DIMENSIONS
Shell
Size
D1
Max
D2
Max
L1
Max
L2
Max
L3
Max
L4
Max
Weight
gr.
Max
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
22.8
29.2
32.0
32.0
36.5
39.9
43.1
46.6
53.4
60.1
66.3
6.5
9.0
11.0
11.0
14.2
15.8
15.8
21.4
21.4
26.7
31.7
45
47
48
57
58
61
61
66
66
72
75
42
42
45
45
53
53
58
58
58
66
69
100
100
100
100
100
100
100
100
100
100
100
22.7
27.5
30.0
30.0
33.0
37.5
37.5
43.3
48.0
55.0
58
37
58
68
78
90
109
113
159
181
245
300
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Silver Plating Over Nickel
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
29
www.glenair.com
VG95234
Connectors
VG95234 E1 and VG95234 K
90° Plug with Conduit Adapter (E1)
and Grounding Fingers (K)
VG95234
1 - Standard AWG Contacts
(Omit for Metric)
Contact
Arrangement
Basic Part Number
E1
32-6
E1 - 90° Plug
without Grounding
Fingers, Cable Clamp and
Bushing.
K - 90° Plug with
Grounding
Fingers without Cable
Clamp and Bushing.
P
1
Alternate Insert
Positions
N-X-Y
P - Pin contacts
S - Socket contacts
L1
N
D1
L2
L5
D3
APPLICATION NOTES
1.
90° Plug connector without cable clamp and bushing.
4.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
Insert arrangements IAW VG95234. Please see pages 10-15.
6.
All dimensions are metric unless otherwise noted.
3.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
30
VG95234
Connectors
VG95234 E1 and VG95234 K
90° Plug with Conduit Adapter (E1)
and Grounding Fingers (K)
DIMENSIONS
Shell
Size
D1
Max
D3
L1
Max
L2
Max
L5
Min
Weight
gr.
Max
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
22.8
29.2
32.0
32.0
36.5
39.9
43.1
46.6
53.4
60.1
66.3
0.6250 - 24UNEF
0.7500 - 20UNEF
0.8750 - 20UNEF
0.8750 - 20UNEF
1.0000 - 20UNEF
1.1875 - 18NEF
1.1875 - 18NEF
1.4375 - 18NEF
1.4375 - 18NEF
1.7500 - 18NS
2.0000 - 18NS
45
47
48
57
58
61
61
66
66
72
75
30
30
30
35
35
35
40
40
40
45
50
9.4
9.4
9.4
9.4
9.4
9.4
9.4
9.4
9.4
11.0
12.6
27
43
48
58
58
74
78
104
126
160
190
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Silver Plating Over Nickel
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Copper Alloy Grounding Finger
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
31
www.glenair.com
VG95234
Connectors
VG95234 F
In Line Receptacle with Cable Clamp,
Bushing and Wire Sealing Grommet
VG95234
F
32-6
F - In-Line
Receptacle with
Cable Clamp and
Bushing
L2
1 - Standard AWG Contacts
(Omit for Metric)
Contact
Arrangement
Basic Part Number
S
1
P - Pin contacts
S - Socket contacts
N
Alternate Insert
Positions
N-X-Y
L3
D1
ØA
D2
L7
L5
L1
L4
APPLICATION NOTES
1.
90° Plug connector without cable clamp and bushing.
4.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
Insert arrangements IAW VG95234. Please see pages 10-15.
6.
All dimensions are metric unless otherwise noted.
3.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
32
VG95234
Connectors
VG95234 F
In Line Receptacle with Cable Clamp,
Bushing and Wire Sealing Grommet
DIMENSIONS
Shell
Size
ØA
+0
-0.15
D1
Max
D2
Max
L1
Max
L2
±0.4
-0
L3
±0.2
L4
Max
L5
±0.2
L7
Max
Weight
gr.
Max
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
25.2
29.8
32.3
32.3
34.8
37.8
41.1
44.6
50.9
57.1
63.6
6.5
9.0
11.0
11.0
14.2
15.8
15.8
21.4
21.4
26.7
31.7
60
62
70
70
77
77
77
85
85
85
105
14.2
14.2
14.2
19.0
19.0
19.0
19.0
20.6
20.6
22.2
22.2
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
120
120
120
125
125
125
125
125
125
125
135
20.6
25.4
28.6
28.6
31.7
34.9
38.1
41.3
47.6
54.0
60.6
22.7
27.5
30.0
30.0
33.0
37.5
37.5
43.3
48.0
55.0
58.0
35
50
60
65
80
95
105
140
160
205
270
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Silver Plating Over Nickel
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
33
www.glenair.com
VG95234
Connectors
VG95234 G and VG95234 T
Straight Plug with Heat Shrink Boot Adapter (G),
Grounding Fingers (T), and Wire Sealing Grommet
Basic Part Number
VG95234
1 - Standard AWG Contacts
(Omit for Metric)
Contact
Arrangement
G
32-6
G - Straight Plug
with Heat Shrink
Boot Adapter
T - Add Grounding
Fingers
P
P - Pin contacts
S - Socket contacts
1
N
Alternate Insert
Positions
N-X-Y
L5
D6 D5
K
D4
D3
3.5 ±0.2
D1
L1
APPLICATION NOTES
1.
Straight plug connector with wire sealing grommet and shrink
boot adapter.
4.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
6.
All dimensions are metric unless otherwise noted.
3.
Insert arrangements IAW VG95234. Please see pages 10-15.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
34
VG95234
Connectors
VG95234 G and VG95234 T
Straight Plug with Heat Shrink Boot Adapter (G),
Grounding Fingers (T), and Wire Sealing Grommet
DIMENSIONS
Shell
Size
D1
Max
D3
±0.2
D4
±0.2
D5
Max
D6
Min
K
Key
L1
Max
L5
±0.5
Weight
gr.
Max
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
22.8
29.2
32.0
32.0
36.5
39.9
43.1
46.6
53,4
60.1
66.3
17.0
20.1
23.5
23.5
26.5
30.2
33.6
36.1
41.4
48.6
54.8
15.5
19.1
23.9
23.9
23.9
29.6
29.6
37.8
37.8
47.8
47.8
13.3
17.0
21.9
21.9
21.9
26.2
26.2
34.5
34.5
43.6
43.6
7.7
10.6
13.5
13.5
14.6
18.7
20.8
24.6
27.0
33.3
38.5
20
23
26
26
28
32
36
39
46
52
58
50
50
50
60
60
65
65
65
65
70
80
11.7
11.7
11.7
11.5
11.5
12.7
12.7
12.7
12.7
15.2
15.2
26
43
53
60
67
77
82
97
122
167
182
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Silver Plating Over Nickel
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
35
www.glenair.com
VG95234
Connectors
VG95234 H and VG95234 L
Straight Plug with Conduit Adapter (H)
and Grounding Fingers (L)
1 - Standard AWG Contacts
(Omit for Metric)
Contact
Arrangement
Basic Part Number
VG95234
H
32-6
H - Includes Wire
Sealing Grommet;
without Grounding
Fingers
L - With Grounding
Fingers and Wire
Sealing Grommet
P
1
N
Alternate Insert
Positions
N-X-Y
P - Pin contacts
S - Socket contacts
L2
D2
D3
L1
D1
APPLICATION NOTES
1.
Straight Plug connector.
4.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
3.
Insert arrangements IAW VG95234. Please see pages 10-15.
6.
All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
36
VG95234
Connectors
VG95234 H and VG95234 L
Straight Plug with Conduit Adapter (H)
and Grounding Fingers (L)
DIMENSIONS
Shell
Size
D1
Max
D2
Min
D3
L1
Max
L2
Min
Weight
gr.
Max
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
22.8
29.2
32.0
32.0
36.5
39.9
43.1
46.6
53.4
60.1
66.3
8.2
11.1
14.3
14.3
16.7
19.8
19.8
25.4
27.0
32.5
35.7
0.6250 - 24UNEF
0.7500 - 20UNEF
0.8750 - 20UNEF
0.8750 - 20UNEF
1.0000 - 20UNEF
1.1875 - 18NEF
1.1875 - 18NEF
1.4375 - 18NEF
1.4375 - 18NEF
1.7500 - 18NS
2.0000 - 18NS
50
50
50
60
60
60
60
65
65
65
80
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
9.5
11.0
11.8
21
33
42
51
59
58
62
84
100
116
142
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Silver Plating Over Nickel
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
37
www.glenair.com
VG95234
Connectors
VG95234 J1 and VG95234 J2
Wall Mount Receptacle
with Cable Clamp, Bushing and Wire Sealing Grommet
With Threaded (J1) and Thru-Holes (J2)
Basic Part Number
VG95234
Contact
Arrangement
J1
32-6
S
1
L3
N
Alternate Insert
Positions
N-X-Y
P - Pin contacts
S - Socket contacts
Wall Mount
Receptacle with
Cable Clamp and
Bushing and...
J1 - Threaded
Holes
J2 - Thru-Holes
L2
1 - Standard AWG Contacts
(Omit for Metric)
D2
E
D3 L6
ØA
L4
L1
L5
VG95234 J2
D2
APPLICATION NOTES
1.
Rear mount receptacle with wire sealing grommet, cable clamp 4.
and bushing.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
6.
All dimensions are metric unless otherwise noted.
3.
Insert arrangements IAW VG95234. Please see pages 10-15.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
38
VG95234
Connectors
VG95234 J1 and VG95234 J2
Wall Mount Receptacle
with Cable Clamp, Bushing and Wire Sealing Grommet
With Threaded (J1) and Thru-Holes (J2)
DIMENSIONS
D2
Shell
Size
ØA
+0
-0.15
J1
J2
H13
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.7
3.7
4.3
4.3
D3
Max
E
±0.1
L1
±0.3
L2
+0.4
-0
L3
±0.2
L4
±0.3
L5
Max
L6
Max
Weight
gr.
Max
6.5
9.0
11.0
11.0
14.2
15.8
15.8
21.4
21.4
26.7
31.7
18.2
23.0
24.6
24.6
27.0
29.4
31.8
35.9
39.7
44.5
49.2
60
62
70
70
77
77
77
85
85
85
105
18.2
18.2
18.2
21.5
23.05
23.05
23.05
23.05
24.05
24.05
24.05
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
120
120
120
125
125
125
125
125
125
125
135
22.7
27.5
30.0
30.0
33.0
37.5
37.5
43.3
48.0
55.0
58.0
35
50
60
65
80
95
105
140
160
205
270
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
CRIMP CONTACTS
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Copper Alloy with Silver Plating Over Nickel
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
39
www.glenair.com
VG95234
Connectors
VG95234 M
Straight Plug with EMI/RFI Backshell,
Grounding Fingers, Wire Sealing Grommet
and Heat Shrink Boot Lip
1 - Standard AWG Contacts
(Omit for Metric)
Contact
Arrangement
Basic Part Number
VG95234
M
32-6
1
P - Pin contacts
S - Socket contacts
M - Straight
Plug with EMI
Backshell/Shrink
Boot Adapter and
Grounding Fingers
1
P
N
Alternate Insert
Positions
N-X-Y
L6
L5
D4
K
D6
D5
D7
3.5 ±0.2
D3
D1
L7
L1
APPLICATION NOTES
1.
Straight plug connector with EMI backshell and boot adapter.
4.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
Insert arrangements IAW VG95234. Please see pages 10-15.
6.
All dimensions are metric unless otherwise noted.
3.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
40
VG95234
Connectors
VG95234 M
Straight Plug with Grounding Fingers,
EMI/RFI Backshell, Wire Sealing Grommet
and Heat Shrink Boot Lip
DIMENSIONS
Shell
Size
D1
Max
D3
Max
D4
Min
D5
D6
Max
D7
±0.5
K
Key
L1
Max
L5
Min
L6
+1
-0
L7
+1
-0
Weight
gr.
Max
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
22.8
29.2
32.0
32.0
36.5
39.9
43.1
46.6
53,4
60.1
66.3
22
25
28
28
31
35
38
41
48
54
61
8.6
10.6
13.5
13.5
14.6
18.5
20.8
24.6
27.0
33.3
38.5
M16+1
M20+1
M23+1
M23+1
M26+1
M30+1
M32+1
M36+1
M39+1
M45+1
M52+1
16.3
20.0
23.0
23.0
24.5
28.5
30.5
34.5
37.5
44.0
51.0
18.5
22.0
25.0
25.0
28.0
32.0
34.0
38.0
41.0
48.0
55.0
20
23
26
26
38
32
36
39
46
52
58
55
57
60
70
70
70
70
70
70
70
80
4.5
5.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
7
7
8
8
10
10
10
10
10
10
10
17
17
18
18
18
18
18
18
18
18
18
40
45
55
65
75
85
100
115
130
170
190
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Silver Plating Over Nickel
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
41
www.glenair.com
VG95234
Connectors
VG95234 N1 and VG95234 N2
Wall Mount Receptacle
with EMI/RFI Backshell and Heat Shrink Boot Lip,
Sealing Grommet and Grounding Fingers
VG95234
N1
32-6
Rear Mount
Receptacle with EMI
Backshell/Shrink
Boot Adapter and...
N1 - Threaded Holes
N2 - Thru-Holes
1
L2
L3
S
1
P - Pin contacts
S - Socket contacts
N
Alternate Insert
Positions
N-X-Y
L6
D2
L5
D4
ØA
K
1 - Standard AWG Contacts
(Omit for Metric)
Contact
Arrangement
Basic Part Number
D6 D5
D7
E
D3
3.5 ±0.2
L4
L7
VG95234 N2
L1
D2
APPLICATION NOTES
1.
Rear wall mount receptacle with EMI backshell and shrink boot 4.
adapter.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
6.
All dimensions are metric unless otherwise noted.
3.
Insert arrangements IAW VG95234. Please see pages 10-15.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
42
VG95234
Connectors
VG95234 N1 and VG95234 N2
Wall Mount Receptacle
with EMI/RFI Backshell and Heat Shrink Boot Lip,
Sealing Grommet and Grounding Fingers
DIMENSIONS
D2
Shell
Size
ØA
+0
-0.15
N1
N2
H13
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.7
3.7
4.3
4.3
E
±0.1
L1
Max
L2
+0.4
-0
L3
±0.2
L4
±0.3
Weight
gr.
Max
18.2
23.0
24.6
24.6
27.0
29.4
31.8
35.9
39.7
44.5
49.2
55
58
70
70
70
70
70
70
70
75
85
18.2
18.2
18.2
21.5
23.05
23.05
23.05
23.05
24.05
24.05
24.05
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
45
55
65
75
85
95
105
120
150
190
220
Please refer to VG95234M for dimensions D3, D4, D5, D6, D7, K, L5, L6 and L7.
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
CRIMP CONTACTS
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Copper Alloy with Silver Plating Over Nickel
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
43
www.glenair.com
VG95234
Connectors
VG95234 R1
Straight Plug with Grounding Fingers,
EMI / RFI Backshell and Shrink Boot Adapter
Basic Part Number
VG95234
R1
32-6
P
1
P - Pin contacts
S - Socket contacts
R1 - Straight Plug
with EMI Backshell/
Shrink Boot Adapter
and Grounding
Fingers
N
Alternate Insert
Positions
N-X-Y
L6
3.5 ±0.2
L5
D3
K
1 - Standard AWG Contacts
(Omit for Metric)
Contact
Arrangement
1 ±0.2
D4
D6
18 max
D5
D7
D1
L1
APPLICATION NOTES
1.
Straight plug connector with grounding finger EMI/RFI
backshell and wire sealing grommet.
4.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
6.
All dimensions are metric unless otherwise noted.
3.
Insert arrangements IAW VG95234. Please see pages 10-15.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
44
VG95234
Connectors
VG95234 R1
Straight Plug with Grounding Fingers,
EMI / RFI Backshell and Shrink Boot Adapter
DIMENSIONS
Shell
Size
Useable
Inserts
D1
Max
D3
+0.2
-0
D4
+0.4
-0
D5
D6
±0.3
D7
±0.3
K
Key
L1
Max
L5
Max
L6
+0.2
-0
Weight
gr.
Max
14 S
16 S
18
20
28
32
14S-6
16S-1
18-1
20-A48
28-21
32-A69
29.2
32.0
36.5
39.9
53.4
60.1
10.0
10.0
12.2
13.4
19.0
21.0
14.0
14.0
16.0
18.0
26.5
26.5
M20x1
M20x1
M22x1
M27x1
M35x1
M35x1
21.0
21.0
23.0
26.6
37.5
37.5
23.5
23.5
25.5
30.5
41.5
41.5
23
26
38
32
46
52
57
57
66
68
75
79
21
21
21
21
26
26
1.1
1.1
1.1
1.1
1.9
1.9
50
60
80
90
135
175
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
Stainless Steel
Coupling Pins
CRIMP CONTACTS
Stainless Steel Spring
Copper Alloy with Silver Plating Over Nickel
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
45
www.glenair.com
VG95234
Connectors
VG95234 S1 and VG95234 S2
Rear Wall Mount Receptacle with EMI / RFI Backshell,
Dual-Lip Heat Shrink Boot Adapter
Basic Part Number
VG95234
S1
32-6
Rear Wall Mount
Receptacle with EMI
Backshell/Shrink
Boot Adapter
S1 - Threaded Holes
S2 - Thru-Holes
L2
L3
S
1
N
Alternate Insert
Positions
N-X-Y
P - Pin contacts
S - Socket contacts
L6
3.5 ±0.2
L5
ØA
1 ±0.2
D4
D3
K
1 - Standard AWG Contacts
(Omit for Metric)
Contact
Arrangement
D6 D5
D2
E
D7
18 max
L4
L1
VG95234 S2
D2
APPLICATION NOTES
1.
Rear wall mount receptacle with EMI backshell.
4.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
Insert arrangements IAW VG95234. Please see pages 10-15.
6.
All dimensions are metric unless otherwise noted.
3.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
46
VG95234
Connectors
VG95234 S1 and VG95234 S2
Rear Wall Mount Receptacle with EMI / RFI Backshell,
Dual-Lip Heat Shrink Boot Adapter
DIMENSIONS
D2
Shell
Size
Useable
Inserts
ØA
+0
-0.15
S1
S2
H13
14 S
16 S
18
20
28
32
14S-6
16S-1
18-1
20-A48
28-21
32-A69
24.6
27.4
30.8
34.2
46.7
53.4
M4
M4
M4
M4
M4
M4
3.2
3.2
3.2
3.2
3.7
4.3
E
±0.1
L1
Max
L2
+0.4
-0
L3
±0.2
L4
±0.3
Weight
gr.
Max
23.0
23.0
24.6
24.6
27.0
29.4
61
61
70
72
78
81
18.2
18.2
23.05
23.05
24.05
24.05
3.2
3.2
4.0
4.0
4.0
4.0
30.0
32.6
35.0
38.0
50.8
57.0
60
70
80
90
155
195
Please refer to VG95234R1 for dimensions D3, D4, D5, D6, D7, K, l5, and l6.
MATERIALS
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
Requirements
CRIMP CONTACTS
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Copper Alloy with Silver Plating Over Nickel
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
47
www.glenair.com
VG95234
Connectors
VG95234 U1 and VG95234 U2
Rear Wall Mount Receptacle
with Heat Shrink Boot Adapter and Sealing Grommet
VG95234
U1
32-6
Rear Wall Mount
Receptacle with Heat
Shrink Boot Adapter
U1 - Threaded Holes
U2 - Thru-Holes
L2
1 - Standard AWG Contacts
(Omit for Metric)
Contact
Arrangement
Basic Part Number
1
P - Pin contacts
S - Socket contacts
L3
D2
L5
ØA
D6 D5
K
S
D4
N
Alternate Insert
Positions
N-X-Y
E
D3
3.5 ±0.2
L4
L1
VG95234 U2
D2
APPLICATION NOTES
1.
Rear wall mount receptacle with heat shrink boot adapter.
4.
2.
Standard crimp contact material consists of copper alloy with
silver plating. Please see pages 16-17 for additional contact
information.
Standard insert is synthetic rubber, oil and low temperature
resistant (-55°C to +125°C) IAW MIL-R-3065.
5.
Stainless steel and marine bronze shells are available in Series
ITS products. Please consult factory.
Insert arrangements IAW VG95234. Please see pages 10-15.
6.
All dimensions are metric unless otherwise noted.
3.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
48
VG95234
Connectors
VG95234 U1 and VG95234 U2
Rear Wall Mount Receptacle
with Heat Shrink Boot Adapter and Sealing Grommet
DIMENSIONS
D2
Shell
Size
ØA
+0
-0.15
B1
B2
H13
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
M4
M4
M4
M4
M4
M4
M4
M4
M5
M5
M5
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.7
3.7
4.3
4.3
E
±0.1
L1
Max
L2
+0.4
-0
L3
±0.2
L4
±0.3
Weight
gr.
Max
18.2
23.0
24.6
24.6
27.0
29.4
31.8
35.9
39.7
44.5
49.2
55
70
70
70
70
70
70
70
70
75
85
18.2
18.2
18.2
21.5
23.05
23.05
23.05
23.05
24.05
24.05
24.05
2.8
3.2
3.2
3.2
4.0
4.0
4.0
4.0
4.0
4.0
4.0
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
45
53
63
73
83
93
103
118
148
188
218
Please refer to VG95234G for dimensions D3, D4, D5, D6, D7, K and L5.
MATERIALS
SHELLS
INSERTS (Temperature Range)
Aluminum Alloy
IAW QQ-A-591 Shells
High Insulation Synthetic Rubber
-55°C/+125°C
CRIMP CONTACTS
Copper Alloy with Silver Plating Over Nickel
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
49
www.glenair.com
VG95234
Accessories
VG95234 KB
Plug Protective Cover
With Stainless Steel Chain
Shell size
KB - 14 S
VG95234
Bayonet Compatible
Plug Cover with
Stainless Steel Chain
Basic Part Number
L2
DIMENSIONS
D1
L1
D2
Connector
Size
D1
Max
D2
+0.6
-0
L1
Min
L2
Max
Weight
gr.
Max
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
21.0
27.5
30.0
30.0
33.5
37.0
40.0
43.5
49.5
56.0
62.5
4.3
4.3
4.3
4.3
4.3
4.7
4.7
4.7
4.7
5.5
5.5
90
100
100
115
115
130
130
130
190
190
190
29
29
29
37
37
37
37
37
37
37
37
19
26
28
33
36
43
47
53
63
75
88
APPLICATION NOTES
1.
Metal protective cover for bayonet plug connectors with
stainless steel chain.
2.
Standard materials configuration consists of aluminum alloy
with cadmium olive drab passivation IAW QQ-P-416.
© 2008 Glenair, Inc.
3.
Other types of front and rear connector accessories are available.
See our website and/or contact the factory for complete
information.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
50
VG95234
Accessories
VG95234 KC
Plug Protective Cover
With Polyamide Black Rope
Shell size
VG95234
KC - 14 S
Basic Part Number
Rope Lanyard
End Termination for
Plug Cover
L2
2L
DIMENSIONS
0.8
7
+3
Ø4
D1
5.5 ±0.3
3
L1 = 400 +20
19
2 +0.2
Connector
Size
D1
Max
L1
Min
L2
Max
Weight
gr.
Max
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
21.0
27.5
30.0
30.0
33.5
37.0
40.0
43.5
49.5
56.0
62.5
400
400
400
400
400
400
400
400
400
400
400
29
29
29
37
37
37
37
37
37
37
37
19
26
28
33
36
43
47
53
63
75
88
4.1 +0.5
7
+2
APPLICATION NOTES
1.
Metal protective cover for bayonet plug connectors with
polyamide black rope.
2.
Standard materials configuration consists of aluminum alloy
with cadmium olive drab passivation IAW QQ-P-416.
© 2008 Glenair, Inc.
3.
Other types of front and rear connector accessories are available.
See our website and/or contact the factory for complete
information.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
51
www.glenair.com
VG95234
Accessories
VG95234 KR
Receptacle Protective Cover
With Stainless Steel Chain
Shell size
KR - 14 S
VG95234
Bayonet Compatible
Receptacle Cover
with Stainless Steel Chain
Basic Part Number
L2
DIMENSIONS
D1
Connector
Size
D1
Max
D2
+0.6
-0
L1
Min
L2
Max
Weight
gr.
Max
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
23.5
30.5
33.0
33.0
37.5
41.0
44.0
47.5
54.5
61.0
67.5
4.3
4.3
4.3
4.3
4.3
4.7
4.7
4.7
4.7
5.5
5.5
90
90
90
100
100
115
115
115
160
160
160
15.5
15.5
15.5
21.2
21.2
21.2
21.2
21.2
21.2
21.2
21.2
16
18
19
23
27
30
33
37
42
48
55
L1
D2
APPLICATION NOTES
1.
Metal protective cover for bayonet receptacle connectors with
stainless steel chain.
2.
Standard materials configuration consists of aluminum alloy
with cadmium olive drab passivation IAW QQ-P-416.
© 2008 Glenair, Inc.
3.
Other types of front and rear connector accessories are available.
See our website and/or contact the factory for complete
information.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
52
VG95234
Connectors
VG95234 KA
Receptacle Protective Cover
With Polyamide Black Rope
Shell size
KA - 14 S
VG95234
Rope Lanyard
End Termination for
Receptacle Cover
Basic Part Number
L2
2L
0.8
7
+3
DIMENSIONS
Ø4
D1
5.5 ±0.3
3
L1 +20
400
19
2 +0.2
4.1 +0.5
7
Connector
Size
D1
Max
L1
Min
L2
Max
Weight
gr.
Max
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
23.5
30.5
33.0
33.0
37.5
41.0
44.0
47.5
54.5
61.0
67.5
400
400
400
400
400
400
400
400
400
400
400
15.5
15.5
15.5
21.2
21.2
21.2
21.2
21.2
21.2
21.2
21.2
16
18
19
23
27
30
33
37
42
48
55
+2
APPLICATION NOTES
1.
Metal protective cover for bayonet receptacle connectors with
polyamide black rope.
2.
Standard materials configuration consists of aluminum alloy
with cadmium olive drab passivation IAW QQ-P-416.
© 2008 Glenair, Inc.
3.
Other types of front and rear connector accessories are available.
See our website and/or contact the factory for complete
information.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
53
www.glenair.com
VG95234
Accessories
VG95234 B0D
Dummy Plug Stowage Receptacle
with Open Back for Front Panel Mount Connectors
Shell size
B0D - 14 S
VG95234
Dummy Plug Stowage
Receptacle with Open back for Front
Panel Mount Connectors
Basic Part Number
DUMMY STOWAGE RECEPTACLE
D2
L3
L2
D1
L1
APPLICATION NOTES
1.
Dummy receptacle stowage fitting protects the plug connector
when not in use.
2.
Standard materials configuration consists of aluminum alloy
with cadmium olive drab passivation IAW QQ-P-416.
© 2008 Glenair, Inc.
3.
Other types of front and rear connector accessories are available.
See our website and/or contact the factory for complete
information.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
54
VG95234
Accessories
VG95234 B0D
Dummy Plug Stowage Receptacle
with Open Back for Front Panel Mount Connectors
DIMENSIONS
© 2008 Glenair, Inc.
Shell
Size
D1
+0
-0.15
D2
H13
L1
±0.3
L2
±0.1
L3
Max
Weight
gr.
Max
10 SL
14 S
16 S
16
18
20
22
24
28
32
36
18.2
24.6
27.4
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
3.2
3.2
3.2
3.2
3.2
3.2
3.2
3.7
3.7
4.3
4.3
25.4
30.0
32.5
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
18.2
23.0
24.6
24.6
27.0
29.4
31.8
34.9
39.7
44.5
49.2
17.5
18.0
18.0
23.5
23.5
23.5
23.5
25.5
25.5
27.0
27.0
14
16
18
23
26
32
36
41
52
66
80
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
55
www.glenair.com
VG95234
Accessories
VG95234 KK
General Duty Class A Cable Clamp
Shell size
KK - 6 A
VG95234
MIL-DTL-5015 Compatible
General Duty Cable Clamp
Basic Part Number
GENERAL DUTY CLASS A CABLE CLAMP
L3
D2
D3
D1
L1
L2
APPLICATION NOTES
1.
General duty Class A cable clamp suitable for jacketed or
multipolar cable or wires protected by tubing.
2.
Standard materials configuration consists of aluminum alloy
with cadmium olive drab passivation IAW QQ-P-416.
© 2008 Glenair, Inc.
3.
Other types of front and rear connector accessories are available.
See our website and/or contact the factory for complete
information.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
56
VG95234
Accessories
VG95234 KK
General Duty Class A Cable Clamp
DIMENSIONS
Part Number
Connector
Size
Sleeve
D1
±0.8
D2
D3
Max
L1
±0.8
L2
±0.8
L3
Weight
gr.
Max
VG95234 KK - 4A
VG95234 KK - 6A
VG95234 KK - 8A
VG95234 KK - 10A
VG95234 KK - 12A
VG95234 KK- 16A
VG95234 KK - 20A
VG95234 KK - 24A
10SL
14S
16 - 16S
18
20 - 22
24 - 28
32
36
VG95234 KT 10SL
VG95234 KT 14S
IT 3420 - 8
IT 3420 - 10
IT 3420 - 12
VG95234 KT 24
VG95234 KT 34
IT 3420 - 24
20.63
24.61
27.79
30.18
34.93
42.06
51.59
56.36
0.6250-24UNEF
0.7500-20UNEF
0.8750-20UNEF
1.0000-20UNEF
1.1875-18NEF
1.4375-18NEF
1.7500 - 18UNS
2.000 - 18UNS
8.0
11.2
14.3
15.9
19.1
23.9
31.8
35.0
22.23
26.98
29.36
31.75
37.31
42.88
51.59.5
57.94
20.63
22.23
23.83
23.83
23.83
26.19
27.79
29.36
10.3
10.3
10.3
10.3
10.3
10.3
11.9
13.5
15
20
25
25
35
45
55
75
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
57
www.glenair.com
VG95234
Accessories
VG95234 KT
Neoprene Bushing for Cable
Used with General Duty Class A Cable Clamps
Shell size
KK - 6 A
VG95234
MIL-DTL-5015 Compatible
General Duty Cable Clamp
Basic Part Number
NEOPRENE BUSHING
D1
D2
D3
L
APPLICATION NOTES
1.
Neoprene bushing for protection and reduction, used with
Class A cable clamps.
© 2008 Glenair, Inc.
2.
Other types of front and rear connector accessories are available.
See our website and/or contact the factory for complete
information.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
58
VG95234
Accessories
VG95234 KT
Neoprene Bushing for Cable
Used with General Duty Class A Cable Clamps
DIMENSIONS
© 2008 Glenair, Inc.
Connector
Size
Part Number
D1
±0.1
D2
±0.1
D3
±0.1
L
±0.1
Weight
gr.
Max
10SL
14S
16 - 16S
18
20 - 22
24 - 28
32
36
10-234 KT 10SL
10-234 KT 14S
IT 3420 - 8
IT 3420 - 10
IT 3420 -12
10-234 KT 24
10-234 KT 32
IT 3420 - 24
8.00
10.90
14.02
15.62
18.79
23.60
31.49
34.67
6.60
9.10
11.09
14.27
15.87
21.50
26.80
31.75
10.0
12.7
18.8
22.6
27.5
33.3
40.4
46.9
69.8
66.8
63.5
60.3
57.1
53.9
50.8
47.6
3
5
6
4
7
13
26
30
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
59
www.glenair.com
VG95234
Accessories
VG95234 DA1 and VG95234 DA2
Front Panel Mount Receptacle Gasket
Non-Conductive (DA ... 1) and Conductive (DA ... 2)
Shell size
VG95234
18 -
DA
Basic Part Number
1
Mounting Gaskets
for Front-Mounted Square Flange
Receptacles
DA ... - 1 = Non-Conductive
DA ... - 2 = Conductive
FRONT PANEL MOUNT RECEPTACLE GASKET
DA2 Conductive
DA1 Non-Conductive
S
S
E
D1
E
D1
D2
L
D2
L
APPLICATION NOTES
1.
Conductive and non-conductive gaskets for front-mount square 2.
flange receptacles.
© 2008 Glenair, Inc.
Other types of front and rear connector accessories are available.
See our website and/or contact the factory for complete
information.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
60
VG95234
Accessories
VG95234 DA1 and VG95234 DA2
Front Panel Mount Receptacle Gasket
Non-Conductive (DA ... 1) and Conductive (DA ... 2)
DIMENSIONS
S
Part Number
Shell
Size
D1
+1
-0
D2
+0.5
-0
E
±0.2
L
±0.5
1
±0.4
2
±0.2
Weight
gr.
Max
VG95234 DA 10SL
VG95234 DA 14S
VG95234 DA 16
VG95234 DA 18
VG95234 DA 20
VG95234 DA 22
VG95234 DA 28
VG95234 DA 32
VG95234 DA 36
10SL
14S
16S - 16
18
20
22
28
32
36
15.7
22.1
25.3
28.4
31.6
34.8
44.3
50.7
57.0
4.2
4.2
4.2
4.2
4.2
4.2
5.1
5.1
5.1
18.2
23.0
24.6
27.0
29.4
31.8
39.7
44.5
49.2
24.4
30.0
32.5
35.0
38.0
41.0
50.8
57.0
63.5
1.0
1.0
1.0
1.0
1,0
1.0
1.0
1.0
1.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
2
2
2
2
2
2
2
2
2
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
61
www.glenair.com
VG95234
Accessories
VG95234 DH1 and VG95234 DH2
Rear Panel Mount Receptacle Gasket
Non-Conductive (DH ... 1) and Conductive (DH ... 2)
Shell size
VG95234
18 -
DH
Basic Part Number
1
Mounting Gaskets
for Front-Mounted Square Flange
Receptacles
DH ... - 1 = Non-Conductive
DH ... - 2 = Conductive
REAR PANEL MOUNT RECEPTACLE GASKET
DH2 Conductive
DH1 Non-Conductive
S
S
E
D1
E
D1
D2
L
D2
L
APPLICATION NOTES
1.
Conductive and non-conductive gaskets for rear panel-mount
square flange receptacles.
© 2008 Glenair, Inc.
2.
Other types of front and rear connector accessories are available.
See our website and/or contact the factory for complete
information.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
62
VG95234
Accessories
VG95234 DH1 and VG95234 DH2
Rear Panel Mount Receptacle Gasket
Non-Conductive (DH ... 1) and Conductive (DH ... 2)
DIMENSIONS
S
Part Number
Shell
Size
D1
+0.3
-0
D2
+0.5
-0
E
±0.2
L
±0.5
1
±0.4
2
±0.2
g
Max
VG95234 DH 10SL
VG95234 DH 14S
VG95234 DH 16
VG95234 DH 18
VG95234 DH 20
VG95234 DH 22
VG95234 DH 24
VG95234 DH 28
VG95234 DH 32
VG95234 DH 36
10SL
14S
16S - 16
18
20
22
24
28
32
36
18.2
24.6
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
4.2
4.2
4.2
4.2
4.2
4.2
4.2
5.1
5.1
5.1
18.2
23.0
24.6
27.0
29.4
31.8
34.9
39.7
44.5
49.2
24.4
30.0
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
1.0
1.0
1.0
1.0
1,0
1.0
1.0
1.0
1.0
1.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
2
2
2
2
2
2
2
2
2
2
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
63
www.glenair.com
Index
VG95234 Bayonet-Lock Connectors
Index
Product Line Overview..........................................1
Applications....................................................2
Available Components..........................................3
Crimp Contact Connector Cross Reference.........4
Crimp Contact Connector Technical Data.............5
Master How to Order.............................................6
Commercial Equivalent Product Line....................7
Pin Contact Arrangements....................................8
Contact Arrangements and Alternate Keyway
Positions......................................................9
Contact Arrangements Front View......................10
Pin Contacts........................................................14
Socket Contacts.................................................15
VG95234 A Front Panel Wall Mount
Receptacle.................................................16
VG95234 B1 and B2 Rear Panel
Wall Mount Receptacle................................18
VG95234 C1 and C2 Bulkhead
Feed-Thru Receptacle.................................20
VG95234 D Straight Plug with Cable Clamp,
Bushing and Wire Sealing Grommet...........22
VG95234 E 90° Plug with Cable Clamp,
Bushing and Wire Sealing Grommet...........24
VG95234 E1 and K 90° Plug with Conduit
Adapter (E1) and Grounding Fingers (K).......26
VG95234 F In-Line Receptacle with Cable Clamp,
Bushing and Wire Sealing Grommet............28
VG94234 G and T Straight Plug with Heat Shrink
Boot Adapter (G), Grounding Fingers (T), and
Wire Sealing Grommet.................................30
VG95234 M Straight Plug with EMI/RFI Backshell,
Grounding Fingers, Wire Sealing Grommet
and Heat Shrink Boot Lip.............................36
VG95234 N1 and N2 Wall Mount Receptacle with
EMI/RFI Backshell and Heat Shrink Boot Lip,
Sealing Grommet & Grounding Fingers..........38
VG95234 R1 Straight Plug w/ EMI/RFI Backshell,
Grounding Fingers, Wire Sealing Grommet
and Dual-Lip Shrink Boot Adapter................40
VG95234 S1 and S2 Wall Mount Receptacle with
EMI/RFI Backshell, Dual-Lip Heat Shrink
Boot Adapter, Sealing Grommet and
Grounding Fingers.......................................42
VG95234 U1 and U2 Wall Mount Receptacle
with Heat Shrink Boot Adapter and
Sealing Grommet.........................................44
VG95234 KB Protective Plug Cover with
Stainless Steel Chain...................................46
VG95234 KC Rope Lanyard End Termination
for KB PLug Cover.......................................47
VG95234 KR Protective Receptacle Cover
with Stainless Steel Chain...........................48
VG95234 KA Rope Lanyard End Termination
for KR Receptacle Cover.............................49
VG95234 B0D Dummy Plug Stowage
Receptacle with Open Back for Front Panel
Mount Connectors........................................50
VG95234 KK General Duty
Class A Cable Clamp...................................52
VG95234 KT Neoprene Bushing for Cable used
with General Duty Class A Cable Clamps.......54
VG95234 H and VG95234 L
Straight Plug with Conduit Adapter (H)
and Grounding Fingers (L)...........................32
VG95234 DA1 and DA2Front Panel Mount
Receptacle Gasket, Non-Conductive (DA1),
Conductive (DA2)........................................56
VG95234 J1 and J2 Wall Mount Receptacle with
Cable Clamp, Bushing & Wire Sealing Grommet,
Threaded (J1) and Thru-Holes (J2).............34
VG95234 DH1 and DH2 Rear Panel Mount
Receptacle Gasket, Non-Conductive (DH1),
Conductive (DH2)........................................58
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
64
More Options Than Ever Before!
Glenair Commercial Series ITS
Reverse Bayonet Connectors
Ruggedized Env
ironmental
Power and Sign
al Connectors
Over 200 MIL-C
-5015 In
sert Arrangemen
ts • Improved
t Coupling • Now
VG 95234 Qualifi
ed!
Reverse Bayone
United S
tates
„
United K
ingdom
„
Germany
„
France
„
Nordic
„
Italy
„
Spain
„
Japan
EU Sales: Glenair Connectors Italia, S.r.L. Tel: +39-02-91082121 Email: [email protected]
North American Sales: Glenair Connecticut, Tel: 203-741-1115 Email: [email protected]
Factory Support: Commital S.p.a. (Italy) Tel: +39-51-7821811 Email: [email protected]
www.glenair.com
A World of Interconnect Solutions
A World of
Interconnect
Solutions
Glenair, Inc.
1211 Air Way • Glendale, California • 91201-2497
Telephone: 818-247-6000 • Fax: 818-500-9912 • [email protected]
www.glenair.com
Telephone:
Glenair Industrial Power and
203-741-1115
Signal Connector Group
Facsimile:
25 Village Lane
203-741-0053
Wallingford, CT
[email protected]
06492
Glenair UK Ltd
40 Lower Oakham Way
Oakham Business Park
P.O. Box 37, Mansfield
Notts, NG18 5BY England
Glenair Microway Systems
7000 North Lawndale Avenue
Lincolnwood, IL
60712
Glenair Nordic AB
Gustav III : S Boulevard 46
S - 169 27 Solna
Sweden
Telephone:
847-679-8833
Facsimile:
847-679-8849
Telephone:
44-1623-638100
Facsimile:
44-1623-638111
[email protected]
Telephone:
46-8-50550000
Facsimile:
46-8-50550001
[email protected]
Glenair Electric GmbH
Siemensstrasse 9
D-61449 Steinbach
Germany
Telephone:
49-6171-5905-0
Facsimile:
49-6171-5905-90
Glenair Iberica
C/ La Vega, 16
45612 Velada
Spain
[email protected]
Glenair Italia S.R.L.
Via Santi, 1
20037 Paderno Dugnano
Milano, Italy
Telephone:
39-02-91082121
Facsimile:
39-02-99043565
[email protected]
© 2008 Glenair, Inc.
Printed in U.S.A.
Telephone:
34-925-89-29-88
Facsimile:
34-925-89-29-87
[email protected]
Glenair France SARL
7, Avenue Parmentier
Immeuble Central Parc #2
31200 Toulouse
France
Telephone:
33-5-34-40-97-40
Facsimile:
33-5-61-47-86-10
[email protected]