U LTR A HA R S H-E N VI RO N M EN T GEO-MARINE ® H I G H - PR ESSUR E ENV IRONME NTAL AND HE RME TIC CONNE CTORS AN D CABL ES MAY 2014 GEO-MARINE ® SERIES 22 Geo-Marine Rugged marine bronze / stainless steel harsh-environment connectors, cables, and accessories ® G lenair Series 22 Geo-Marine® connectors, cables and accessories are designed for severe, high-pressure environment geophysical and oceanographic applications—from offshore oil drilling to seabed exploration and pipleline inspection systems. Preferred by the U.S. Navy and oil patch equipment manufacturers for decades, this third-generation product features: Marine-grade stainless steel machined shells and naval bronze plug coupling rings • High-pressure environmental and hermetic options • Power and signal insert arrangements from 2 to 128 contacts • Anti-decoupling devices on all plugs • Locksmith-keyed polarization • A full line of backshells, protective covers, and molding adapters. Glenair stocks all popular Series 22 Geo-Marine® components for immediate, same-day shipping, and can design and fabricate Geo-Marine® overmolded cable assemblies for the ultimate in high-pressure, extreme environment interconnect protection. cover photo: detail of towed array streamers by Dr. Hannes Grobe Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000 [email protected] www.glenair.com Table of Contents Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories Table of Contents SERIES 22 Geo-Marine® Connectors Specifications, Arrangements and References A Section B High-Pressure Environmental and Hermetic Class Connectors B Section C Backshells, Protective Covers and Other Accessories C Section D Special-Purpose Connector Configurations D Section A High-pressure environmental and hermetic connectors SERIES 22 Geo-Marine® High-pressure harsh-environment connectors and overmolded cables Applications Designed for use in oceanographic, geophysical and other severe industrial environments, Glenair Series 22 Geo-Marine® Connectors and Cables are the ultimate harsh-environment power and signal connector solution. Built to withstand hydrostatic pressures up to 5,000 PSI and exposure to extreme temperatures and corrosives, the Series 22 Geo-Marine® is ideally suited for applications such as US Navy towed array sonar systems, military land vehicles, submersibles and ROV’s, offshore-oil drilling equipment, seabed exploration, pipeline inspection systems, well monitoring equipment, and digital seismic streamers. Design Geo-Marine ® Anti-Galling Arctic Coupling Nuts Marine Grade 316 stainless steel machined shells and Naval Bronze coupling rings High-pressure environmental and hermetically sealed receptacles for field applications Power and signal contact arrangements from 2 to 128 contacts photo: Seismometer, geophysical observatory, Neumayer Station, Antarctica by Dr. Hannes Grobe Anti-vibration ratcheted coupling nuts with castellated knurling Available Viton® overmolded cable assemblies Range of Offerings Geo-Marine® plugs are equipped with arctic coupling nuts—made from marine-grade naval bronze—with easy-to-grip castellated knurling and a powerful ratcheted anti-decoupling mechanism which guarantees reliable mating and demating performance in even the harshest environments. Supplied as discrete connectors—or more typically in build-to-print overmolded cable assemblies—the Series 22 GeoMarine® has delivered reliable, proven performance for over four decades and represents the ultimate interconnect solution for highpressure, harsh-environment applications. A-2 One of the most valuable features of the Series 22 Geo-Marine® from the user’s perspective is the specially-designed castellated and knurled coupling nut which facilitates rapid mating and demating in field applications. Single-start, stub Acme threads reduce thread fouling and binding, and are supplied with an antivibration/anti-decoupling device which prevents accidental loosening or decoupling. Plugs contribute to high-pressure sealing, up to 5,000 PSI in the mated condition, by means of rugged and durable interfacial and peripheral seals. Series 22 Geo-Marine® connectors are supplied with either fused-glass (“H” hermetic class) or high grade thermoplastic (“E” environmental class) insulators. Both classes of connectors are supplied with rugged, corrosion-resistant materials. Lowprofile and scoop-proof cable plugs and receptacles, as well as bulkhead feed-throughs are available. Specially-designed cable sealing backshells as well as EMI/RFI shield termination backshells and environmentally-sealed protective covers complete the range of discrete prduct offerings. 35 insert arrangements (contact sizes #12, #16, #20 and #22) are tooled and fully available. © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Receptacle Configurations: High-pressure environmental (“E”) and hermetic (“H”) class receptacles are available for cable as well as box applications. Rugged o-ring piston seals located inside the receptacle barrel contribute to reliable high-pressure sealing in the mated condition. Glenair is able to supply Geo-Marine® customers with a wide range of receptacle configurations for unique requirements including low-profile and scoop-proof designs, pin and socket contact designs, solder cup and printed circuit board termination, unique flange shapes and mounting configurations, in-line cable receptacles, connector savers and gender changers. High-Pressure Environmental and Hermetic Receptacle Configurations Jam Nut A-3 © 2014 Glenair, Inc. In-Line Square Flange Solder-Mount Bulkhead Feed-Through © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-1 E-Mail: [email protected] SERIES 22 Geo-Marine Geo-Marine® ® High-pressure harsh-environment connectors and overmolded cables Applications Designed for use in oceanographic, geophysical and other severe industrial environments, Glenair Series 22 Geo-Marine® Connectors and Cables are the ultimate harsh-environment power and signal connector solution. Built to withstand hydrostatic pressures up to 5,000 PSI and exposure to extreme temperatures and corrosives, the Series 22 Geo-Marine® is ideally suited for applications such as US Navy towed array sonar systems, military land vehicles, submersibles and ROV’s, offshore-oil drilling equipment, seabed exploration, pipeline inspection systems, well monitoring equipment, and digital seismic streamers. Design Marine Grade 316 stainless steel machined shells and Naval Bronze coupling rings High-pressure environmental and hermetically sealed receptacles for field applications Power and signal contact arrangements from 2 to 128 contacts Anti-vibration ratcheted coupling nuts with castellated knurling Available Viton® overmolded cable assemblies Geo-Marine® plugs are equipped with arctic coupling nuts—made from marine-grade naval bronze—with easy-to-grip castellated knurling and a powerful ratcheted anti-decoupling mechanism which guarantees reliable mating and demating performance in even the harshest environments. Supplied as discrete connectors—or more typically in build-to-print overmolded cable assemblies—the Series 22 GeoMarine® has delivered reliable, proven performance for over four decades and represents the ultimate interconnect solution for highpressure, harsh-environment applications. A-2 © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 SERIES 22 Geo-Marine® Connectors High-pressure environmental and hermetic connectors Anti-Galling Arctic Coupling Nuts photo: Seismometer, geophysical observatory, Neumayer Station, Antarctica by Dr. Hannes Grobe One of the most valuable features of the Series 22 Geo-Marine® from the user’s perspective is the specially-designed castellated and knurled coupling nut which facilitates rapid mating and demating in field applications. Single-start, stub Acme threads reduce thread fouling and binding, and are supplied with an antivibration/anti-decoupling device which prevents accidental loosening or decoupling. Plugs contribute to high-pressure sealing, up to 5,000 PSI in the mated condition, by means of rugged and durable interfacial and peripheral seals. Range of Offerings Series 22 Geo-Marine® connectors are supplied with either fused-glass (“H” hermetic class) or high grade thermoplastic (“E” environmental class) insulators. Both classes of connectors are supplied with rugged, corrosion-resistant materials. Lowprofile and scoop-proof cable plugs and receptacles, as well as bulkhead feed-throughs are available. Specially-designed cable sealing backshells as well as EMI/RFI shield termination backshells and environmentally-sealed protective covers complete the range of discrete prduct offerings. 35 insert arrangements (contact sizes #12, #16, #20 and #22) are tooled and fully available. Receptacle Configurations: High-pressure environmental (“E”) and hermetic (“H”) class receptacles are available for cable as well as box applications. Rugged o-ring piston seals located inside the receptacle barrel contribute to reliable high-pressure sealing in the mated condition. Glenair is able to supply Geo-Marine® customers with a wide range of receptacle configurations for unique requirements including low-profile and scoop-proof designs, pin and socket contact designs, solder cup and printed circuit board termination, unique flange shapes and mounting configurations, in-line cable receptacles, connector savers and gender changers. High-Pressure Environmental and Hermetic Receptacle Configurations Jam Nut A-3 In-Line Square Flange Solder-Mount © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Bulkhead Feed-Through Geo-Marine® Introduction A Series 22 Geo-Marine® Specifications Performance Characteristics 5,000 PSI (fully mated) -65°C to +150°C 500 Cycles of mate/demate Hydrostatic Pressure Rating: Operating Temperature: Durability: Class H Hermetic Receptacles Open-Face Pressure Rating Hermeticity Current Rating Current Rating Contact Size 22 Contact Size 20 Contact Size 16 Contact Size 12 1,000 to 5,000 PSI Less than 1 X 10 -6 sccHe/second @ 1 atmosphere Environmental 5 amps 7.5 amps 13 amps 23 amps Hermetic 3 amps 5 amps 10 amps 17 amps Service Rating Service Rating Suggested Operational Voltage (Sea Level) AC(RMS) 400 300 600 900 M N I II DC 550 450 850 1250 Test Voltage (Sea Level) Test Voltage 50,000 FT. Test Voltage 70,000 FT. Test Voltage 110,000 FT. 1300 VRMS 1000 VRMS 1800 VRMS 2300 VRMS 550 VRMS 400 VRMS 550 VRMS 550 VRMS 350 VRMS 260 VRMS 400 VRMS 500 VRMS 200 VRMS 200 VRMS 200 VRMS 200 VRMS Insulation Resistance: Feet 1 10 50 100 250 500 Meters .3 3.1 15.2 30.5 76.2 152.4 P.S.I. .4 4.3 21.7 43.3 108.3 216.5 1000 Megohms minimum at 500 VDC Depth/Pressure Conversion Bar Feet Meters .0296 1,000 304.8 .2965 1,500 457.2 1.4962 2,500 762.0 2.9854 5,000 1524.0 7.4670 10,000 3048.0 14.9271 11,547 3519.35 P.S.I. 433.0 649.5 1082.5 2165.0 4330.0 5000.0 Bar 29.8543 44.7814 74.6357 149.2715 298.5430 344.7379 Cable/Wire D.C. Resistance Copper Conductors at Room Temperature AWG Ohms per 1000 feet AWG Ohms per 1000 feet 28 66.2 Max 20 10.4 Max 26 41.6 Max 18 6.5 Max 24 26.2 Max 16 4.1 Max 22 16.5 Max 14 2.6 Max 12 1.6 Max Geo-Marine® Connector Anatomy NickelAluminumBronze Coupling Ring Stainless Steel Shell Anti-Decoupling Device Quick-Coupling Thread Flat Compression Seal Piston O-ring Quick-Coupling Thread 3-Key Shell Polarization Plug Gold Plated Solder Pot Contacts © 2014 Glenair, Inc. Interfacial Seal on Pin Inserts Flange O-ring Standard Accessory Accommodation Receptacle Closed Entry Hooded Socket Contacts Red Color Band as Visual Full-Mate Indicator Castellated and Knurled Coupling Ring Series 22 Geo-Marine® U.S. CAGE Code 06324 Stainless Steel Jam Nut and Washer Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-4 E-Mail: [email protected] Geo-Marine® Introduction Series 22 Geo-Marine® Specifications Geo-Marine ® Geo-Marine® is a registered trademark of Glenair, Inc. Item Connector Shells Protective Covers Materials/Finishes Material CRS 316 SAE-AMS-QQ-S-763 CRS 316 SAE-AMS-QQ-S-763 Solder Mount Receptacle CRS 316 SAE-AMS-QQ-S-763 Plug Coupling Nut Molding Adapters and Backshells Marine Bronze SAE AMS-4640 See individual product pages Insulators, Class “E” Epiall 1908, Diallyl Phthalate or Hysol CP2-4289 Insulators, Class “H” Contacts, Pin - Class “E” Contacts, Pin - Class “H” Contacts, Socket Fused Vitreous Glass Leaded Nickel Copper, CA 7021 Nickel-Iron Alloy 52 - MIL-I-23011, Class 2 Copper Alloy, CA7021 None Gold/Ni Gold/Ni Contacts, Socket Hood CRS, SAE-AMS-QQ-S-763 AISI 305 Passivate-ASTM A967 O-Rings Interfacial and Peripherial Seals Nitrile (Buna-N) Rubber MIL-G-21569 Flourosilicone Rubber MIL-DTL-25988 None None Finish Passivate-ASTM A967 Passivate-ASTM A967 Nickel SAE-AMSQQ-N-290, Class 2 None Glenair can design and fabricate overmolded Geo-Marine® cable assemblies featuring Viton® chemical resistant materials— terminated and tested to deliver advanced levels of sealing and durability. Catalog Notes Caution Electrical safety limits must be established by the user. Peak voltages, switching surges, transients, etc., should be used to determine the safety of application. © 2014 Glenair, Inc. For all parts in this catalog: • All parts will be identified with manufacturer’s name and part number, space permitting. • Glenair 600 series backshell assembly tools are recommended for assembly and installation. • Electrical ratings are based on connectors only, not terminated to a cable or conductors, with proper cleaning and drying after hydrostatic testing. • On all length callouts, tolerance is ± .060 unless otherwise specified. • Metric dimensions appear in parentheses in diagrams and tables, based on 1 inch = 25.4 mm, for reference only. Unless otherwise specified, the following other dimensional tolerances apply: .xx = ± .03 (0.8) .xxx = ± .015 (0.4) Lengths = ± .060 (1.52) Angles = ± 5° Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-5 E-Mail: [email protected] A Geo-Marine® Introduction Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories Contact Arrangements STANDARD AND CUSTOM CONTACT ARRANGEMENTS AND KEYWAY POSITIONS (POLARIZATION) Shell Size A Series 22 Pattern 10 12 14 16 18 20 22 24 10-2 10-4 10-6 10-13 12-8 12-10 12-22 14-4 14-12 14-19 14-37 16-6 16-19 16-26 16-55 18-8 18-11 18-22 18-32 18-66 20-11 20-30 20-38 20-41 20-79 22-19 22-38 22-50 22-55 22-85 24-24 24-48 24-61 24-100 24-128 Insert Arrangements Contact Size/Quantity 22 20 16 I 2 I 4 I 6 M 13 I 8 I 10 M 22 I II 14 I 19 M 37 I II 19 I 26 M 55 I 8 II 11 II 22 I 32 M 66 I II 30 I 30 8 I 41 M 79 I II 38 M 48 I 55 M 85 I 12 I 48 I 61 M 100 M 128 Service Rating 12 3 4 N 1 2 150˚ 4 60˚ 6 FACE VIEW RECEPTACLE Alternate Keyway Positions 11 19 Shell Size Desig. N° 1° 2° 3° 4° 10 12 14 16 18 20 22 24 90 90 90 90 90 90 90 90 76 70 69 72 72 72 75 75 62 58 56 60 60 60 64 64 118 122 124 120 120 120 116 116 104 110 111 108 108 108 105 105 2 12 Custom Contact Insert Arrangements Series 22 inserts may be tooled for alternative contact insert arrangements including variably sized electrical contacts—from size 12 to 22—as well as hybrid arrangements incorporating fiber optic, Coax and other contact types. Glenair has produced hundreds of custom arrangements beyond those shown in this catalog. Please contact your local Glenair representative, or the factory, for assistance. © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-6 E-Mail: [email protected] Geo-Marine® Introduction Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories Contact Arrangements Series 22 Geo-Marine® Contact Insert Arrangements Front Face of Pin Inserts Illustrated - Service Ratings Indicated in Parentheses 12 10 10-2 (I) 10-4 (I) 10-6 (I) 10-13 (M) 12-8 (I) 12-10 (I) 12-22 (M) 16 14 14-4 (I) 14-12 (II) 14-19 (I) 14-37 (M) 16-6 (I) 16-19 (II) 16-26 (I) 16-55 (M) 18 18-8 (I) 18-11 (II) 18-22 (II) 18-32 (I) 18-66 (M) 20 P N M n c m b L K e d l Q Z J 20-11 (I) H 20-30 (II) R f A B S g P k Y C U h q T D V j X E W G F 20-38 (I) 20-41 (I) 20-79 (M) 22 16 10 17 4 11 18 5 12 1 19 6 32 2 26 13 7 39 20 33 3 8 40 27 14 21 9 34 28 41 15 22 35 29 23 36 30 42 37 24 31 43 25 48 38 49 44 45 50 22-19 (I) 22-38 (II) 46 47 22-50 (M) 22-55 (I) 22-85 (M) 24 24-24 (?) © 2014 Glenair, Inc. 24-48 (I) 24-61 (I) Series 22 Geo-Marine® 24-100 (M) U.S. CAGE Code 06324 24-128 (M) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-7 E-Mail: [email protected] A Geo-Marine® Introduction Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories PCB Footprints Geo-Marine® PCB Footprints: Size 10 PCB Footprint Insert Arrangement A CL .108 (2.74) A A CL B .108 (2.74) (HOLE TO ACCEPT .0635 (1.613) MAX CONTACT 2X) B Insert Arrangement 10-2 2 #16 Contacts Pin Connector A CL .108 (2.74) .108 (2.74) A B D D CL B C (HOLE TO ACCEPT .0635 (1.613) MAX CONTACT 4X) C Insert Arrangement 10-4 4 #16 Contacts Pin Connector CL A .113 (2.87) B F .130 (3.30) .065 (1.65) A F CL C E C E B D D (HOLE TO ACCEPT .028 (0.177) MAX CONTACT 6X) Insert Arrangement 10-6 6 #20 Contacts Pin Connector .138 (3.51) 1 10 2 9 3 11 CL 4 7 .035 (0.89) 5 .045 (1.14) 2 13 8 3 12 7 4 5 6 6 Insert Arrangement 10-13 13 #22 Contacts © 2014 Glenair, Inc. 11 9 8 .118 (3.00) 1 10 .056 (1.42) 12 13 .146 (3.71) .085 (2.16) CL (HOLE TO ACCEPT .021 (0.533) MAX CONTACT 13X) .049 (1.24) Pin Connector Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-8 E-Mail: [email protected] Geo-Marine® Introduction Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories PCB Footprints Geo-Marine® PCB Footprints: Size 12 PCB Footprint Insert Arrangement A G .174 (4.42) .078 (1.98) .160 (4.06) B F G H F E E Insert Arrangement 12-08 8 #16 Contacts .111 (2.82) (HOLE TO ACCEPT .0635 (1.613) MAX CONTACT 8X) .138 (3.50) Pin Connector A .195 (4.95) B H C D .177 (4.49) D .041 (1.04) B H C .130 (3.30) .065 (1.65) .120 (3.05) A G K A A C J B H K G C J D F F D E (HOLE TO ACCEPT .028 (0.711) MAX CONTACT 10X) Insert Arrangement 12-10 10 #20 Contacts 14 Pin Connector 1 13 2 12 21 11 15 12 4 22 5 21 15 20 11 18 7 9 2 3 16 22 10 6 8 7 4 17 5 6 (HOLE TO ACCEPT .028 (0.533) MAX CONTACT 22X) Insert Arrangement 12-22 22 #22 Contacts © 2014 Glenair, Inc. 1 19 10 8 14 13 3 9 E Pin Connector Series 22 Geo-Marine® I.D. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 U.S. CAGE Code 06324 X In. mm. .045 (1.14) .126 (3.20) .182 (4.62) .203 (5.15) .182 (4.62) .126 (3.20) .045 (1.14) -.045 (-1.14) -.126 (-3.20) -.182 (-4.62) -.203 (-5.15) -.182 (-4.62) -.126 (-3.20) -.045 (-1.14) .045 (1.14) .117 (2.97) .093 (2.36) .000 (.000) -.093 (-2.36) -.117 (-2.97) -.045 (-1.14) .000 (.000) Y In. mm. .197 (5.00) .158 (4.01) .088 (2.23) .000 (.000) -.088 (2.23) -.158 (-4.01) -.197 (-5.00) -.197 (-5.00) -.158 (-4.01) -.088 (-2.23) .000 (.000) .088 (2.23) .158 (4.01) .197 (5.00) .107 (2.72) .026 (0.660) -.075 (-1.90) -.120 (-3.05) -.075 (-1.90) .026 (0.660) .107 (2.72) -.030 (-0.762) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-9 E-Mail: [email protected] Geo-Marine® Introduction Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories PCB Footprints Geo-Marine® PCB Footprints: Size 14 PCB Footprint Insert Arrangement A C L .169 (4.29) .169 (4.29) A A B D C L B D C (HOLE TO ACCEPT .095 (2.413) MAX CONTACT 4X) C Insert Arrangement 14-4 4 #12 Contacts Pin Connector C L .143 (3.63) A J B H M H C C L L G F D G L F E .075 (1.90) Pin Connector C L 17 31 16 29 20 15 C L 14 28 30 I.D. NO. 1 18 2 19 31 32 37 34 33 25 11 21 4 22 5 6 23 26 12 3 20 36 35 27 13 10 .093 (2.36) .211 (5.35) .105 (2.66) Insert Arrangement 14-37 37 #22 Contacts .059 (1.49) .186 (4.72) E .201 (5.10) Insert Arrangement 14-12 12 #16 Contacts 1 C K M D .236 (5.99) B J .038 (.96) K .226 (5.74) A 10 24 9 7 8 (HOLE TO ACCEPT .021 (0.533) MAX CONTACT 37X) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 (HOLE TO ACCEPT .0635 (1.613) MAX DIA CONTACT 12X) X Y In. mm .045 (1.14) .123 (3.12) .211 (5.35) .254 (6.45) .266 (6.75) .247 (6.27) .200 (5.08) .130 (3.30) .045 (1.14) -.045 (-1.14) -.130 (-3.30) -.200 (-5.08) -.247 (-6.27) -.266 (-6.75) -.254 (-6.45) -.211 (-5.35) -.123 (-3.12) -.045 (-1.14) .045 (1.14) In. mm .262 (6.65) .217 (5.51) .160 (4.06) .080 (2.03) -.010 (-0.25) -.098 (-2.48) -.175 (-4.44) -.232 (-5.89) -.262 (-6.65) -.262 (-6.65) -.232 (-5.89) -.175 (-4.44) -.098 (-2.48) -.010 (-0.25) .080 (2.03) .160 (4.06) .217 (5.51) .262 (6.65) .172 (4.36) I.D. NO. 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 X Y In. mm .123 (3.12) .170 (4.31) .170 (4.31) .123 (3.12) .045 (1.14) -.045 (-1.14) -.123 (-3.12) -.170 (-4.31) -.170 (-4.31) -.123 (-3.12) -.045 (-1.14) .045 (1.14) .090 (2.28) .045 (1.14) -.045 (-1.14) -.090 (-2.28) -.045 (-1.14) .000 (0.00) In. mm .119 (3.02) .040 (1.02) -.050 (-1.27) -.127 (-3.22) -.172 (-4.36) -.172 (-4.36) -.127 (-3.22) -.050 (-1.27) .040 (1.02) .119 (3.02) .172 (4.36) .074 (1.87) -.004 (-0.10) -.082 (-2.08) -.082 (-2.08) -.004 (-0.10) .074 (1.87) -.004 (-0.10) Pin Connector © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-10 E-Mail: [email protected] Geo-Marine® Introduction Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories PCB Footprints Geo-Marine® PCB Footprints: Size 16 PCB Footprint Insert Arrangement C L .241 (6.12) E .121 (3.07) A .209 (5.31) A E A F D B F D B CL C Insert Arrangement 16-6 6 #12 Contacts (HOLE TO ACCEPT .095 (2.413) MAX CONTACT 6X) C .241 (6.12) Pin Connector CL .297 (7.54) .257 (6.52) .149 (3.78) .109 (2.77) A M L B N U R D S .109 (2.77) E H N U K CL F G B L .040 (1.01) T J A M C P V K .040 (1.01) V D R T J Insert Arrangement 16-19 19 #16 Contacts C P S H E .297 (7.54) .257 (6.52) F G .149 (3.78) .109 (2.77) .040 (1.01) (HOLE TO ACCEPT .0635 (1.613) MAX CONTACT 19X) .040 (1.01) .109 (2.77) Pin Connector A R C L B R C P S N a M T V c Y L X F K G J M © 2014 Glenair, Inc. Y K X C U D V c L (HOLE TO ACCEPT .028 (0.711) MAX CONTACT 26X) T b Z CL H Insert Arrangement 16-26 26 #20 Contacts a N E W B S P D U b Z A E W J H F G X In. mm .000 (0.00) In. mm .321 (81.53) B .131 (3.32) .293 (7.44) C D .239 (6.07) .305 (7.74) E .319 (8.10) .214 (5.43) .099 (2.51) -.034 (-0.86) Series 22 Geo-Marine® X mm Y I.D. NO P R -.239 (-6.07) -.131 (-3.32) In. mm .214 (5.43) .293 (7.44) S -.070 (-1.77) .177 (4.49) T U .070 (1.77) .175 (4.44) .177 (4.49) .094 (2.38) In. F .278 (7.06) -.161 (-4.08) V .178 (4.52) -.036 (-0.91) G .189 (4.80) -.260 (-6.60) W -.151 (-3.83) H J .067 (1.70) -.067 (-1.70) -.314 (-7.97) -.314 (-7.97) X Y .119 (3.02) .000 (0.00) -.119 (-3.02) K L -.189 (-4.80) -.260 (-6.60) -.161 (-4.08) Z -.151 (-3.83) -.036 (-0.91) M N Pin Connector Y I.D. NO A -.278 (-7.06) -.319 (-8.10) -.305 (-7.74) -.034 (-0.86) .099 (2.51) U.S. CAGE Code 06324 a b c -.178 (-4.52) -.175 (-4.44) .000 (0.00) .000 (0.00) -.203 (-5.15) .094 (2.38) .065 (1.65) -.065 (-1.65) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-11 E-Mail: [email protected] Geo-Marine® Introduction Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories PCB Footprints Geo-Marine® PCB Footprints: Size 16 (continued) PCB Footprint Insert Arrangement 17 10 A 25 32 40 47 4 10 4 53 1 1 5 6 3 55 9 24 46 39 31 2 C L 3 52 16 I.D. NO C L 7 8 9 Insert Arrangement 16-55 55 #22 Contacts 11 12 13 14 15 16 25 17 18 19 20 21 22 23 32 26 41 34 27 42 35 28 36 29 43 37 30 49 54 55 45 24 39 5 6 7 8 9 10 11 12 13 14 53 44 50 38 31 47 48 51 52 46 (HOLE TO ACCEPT .021 (0.533) MAX CONTACT 55X) 15 16 17 18 19 Pin Connector Y X mm In. -.312 (-7.92) -.312 (-7.92) -.312 (-7.92) -.242 (-6.14) -.234 (-5.94) -.234 (-5.94) -.234 (-5.94) -.234 (-5.94) -.234 (-5.94) -.172 (-4.36) -.156 (-3.96) -.156 (-3.96) -.156 (-3.96) -.156 (-3.96) -.156 (-3.96) -.156 (-3.96) -.089 (-2.26) -.078 (-1.98) -.078 (-1.98) 1 2 3 4 40 33 In. .086 (2.18) -.004 (-0.10) -.094 (-2.38) .221 (5.61) .131 (3.32) .041 (1.04) -.049 (-1.24) -.139 (-3.53) -.229 (-5.81) .279 (7.08) .176 (4.47) .086 (2.18) -.004 (-0.10) -.094 (-2.38) -.184 (-4.67) -.274 (-6.95) .316 (8.02) .221 (5.61) .131 (3.32) In. 20 21 22 23 24 25 26 27 28 29 30 31 32 -.078 (-1.98) -.078 (-1.98) -.078 (-1.98) -.078 (-1.98) -.078 (-1.98) .000 (0.00) .000 (0.00) .000 (0.00) .000 (0.00) .000 (0.00) .000 (0.00) .000 (0.00) .089 (2.26) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) .078 (1.98) 33 34 35 36 37 38 Y X mm In. mm .041 (1.04) -.049 (-1.24) -.139 (-3.53) -.229 (-5.81) -.319 (-8.10) .329 (8.35) .176 (4.47) .086 (2.18) -.004 (-0.10) -.094 (-2.38) -.184 (-4.67) -.274 (-6.95) .316 (8.02) .221 (5.61) .131 (3.32) .041 (1.04) -.049 (-1.24) -.139 (-3.53) -.229 (-5.81) I.D. NO 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 In. X mm .078 (1.98) .172 (4.36) .156 (3.96) .156 (3.96) .156 (3.96) .156 (3.96) .156 (3.96) .156 (3.96) .242 (6.14) .234 (5.94) .234 (5.94) .234 (5.94) .234 (5.94) .234 (5.94) .312 (7.92) .312 (7.92) .312 (7.92) Y In. mm -.319 (-8.10) .279 (7.08) .176 (4.47) .086 (2.18) -.004 (-0.10) -.094 (-2.38) -.184 (-4.67) -.274 (-6.95) .221 (5.61) .131 (3.32) .041 (1.04) -.049 (-1.24) -.139 (-3.53) -.229 (-5.81) .086 (2.18) -.004 (-0.10) -.094 (-2.38) Geo-Marine® PCB Footprints: Size 18 PCB Footprint Insert Arrangement A C L .273 (6.93) G I.D. NO mm .219 (5.56) B A G B .252 (6.40) H .062 (1.57) C F H C L F C .280 (7.11) .175 (4.44) D E E Insert Arrangement 18-8 8 #12 Contacts D Pin Connector .275 (6.98) A J (HOLE TO ACCEPT .095 (2.41) MAX CONTACT 8X) .121 (3.07) C L .250 (6.35) .105 (2.66) B H .281 (7.13) K .092 (2.33) L G A J .215 (5.46) H C L B K .053 (1.34) C G L C .260 (6.60) D F .132 (3.35) E D F .105 (2.66) E Insert Arrangement 18-11 11 #16 Contacts (HOLE TO ACCEPT .0635 (1.613) MAX CONTACT 11X) .179 (4.54) Pin Connector A P N R M Y W V K T D E F H G Insert Arrangement 18-22 22 #16 Contacts © 2014 Glenair, Inc. Y W C L U J L T K J U V .267 (6.78) D .307 (7.79) .341 (8.66) .307 (7.79) .146 (3.70) .000 (0.00) P R -.077 (-1.95) .000 (0.00) E F .210 (5.33) .077 (1.95) -.146 (-3.70) -.267 (-6.78) S T U .150 (3.81) .185 (4.69) .077 (1.95) -.077 (-1.95) G H J G Pin Connector X In. mm -.307 (-7.79) -.210 (-5.33) .210 (5.33) F H In. mm .332 (8.43) B C S X X In. mm .077 (1.95) C D E B R M Y I.D. NO A I.D. NO M N A N C S X L P B C L (HOLE TO ACCEPT .028 (0.711) MAX CONTACT 22X) Series 22 Geo-Marine® K L -.332 (-8.43) -.077 (-1.95) -.332 (-8.43) -.210 (-5.33) -.267 (-6.78) -.307 (-7.79) -.146 (-3.70) -.341 (-8.66) .000 (0.00) U.S. CAGE Code 06324 V W X Y -.185 (-4.69) -.150 (-3.81) .000 (0.00) Y In. mm .146 (3.70) .267 (6.78) .332 (8.43) .190 (4.82) .120 (3.04) -.043 (-1.09) -.173 (-4.39) -.173 (-4.39) -.043 (-1.09) .120 (3.04) .000 (0.00) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-12 E-Mail: [email protected] Geo-Marine® Introduction Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories PCB Footprints Geo-Marine® PCB Footprints: Size 18 (continued) PCB Footprint Insert Arrangement T A S B R U e C V f d P j h b M E Y F Z a C L j K N h b M D X E In. mm A B C D .066 (1.67) .189 (4.80) .286 (7.26) .345 (8.76) .357 (9.06) .321 (8.15) .242 (6.14) .130 (3.30) .000 (0.00) -.130 (-3.30) -.242 (-6.14) -.321 (-8.15) .353 (8.96) .305 (7.74) .217 (5.51) .098 (2.48) -.033 (-0.83) -.160 (-4.06) -.265 (-6.73) -.335 (-8.50) -.359 (-9.11) -.335 (-8.50) -.265 (-6.73) -.160 (-4.06) E F G H J K L M G H J X In. mm F Z K Insert Arrangement 18-32 32 #20 Contacts W Y a L H J g (HOLE TO ACCEPT .0435 (1.105) MAX CONTACT 32X) Pin Connector I.D. NO 17 10 25 34 51 4 58 1 64 2 C L 24 13 7 9 16 Insert Arrangement 18-66 66 #22 Contacts 43 26 35 27 36 28 37 29 38 44 58 52 54 32 41 56 49 24 33 50 60 55 48 40 64 65 61 47 39 31 59 53 46 30 23 51 45 21 22 15 50 42 14 8 57 33 20 2 3 63 16 19 12 6 66 9 18 11 5 1 65 3 17 10 4 2534 -.357 (-9.06) -.357 (-9.06) 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 -.279 (-7.08) -.279 (-7.08) -.279 (-7.08) 66 62 63 57 42 (HOLE TO ACCEPT .021 (0.533) MAX CONTACT 66X) Pin Connector X In. mm N P R S T U V W X Y Z -.357 (-9.06) -.345 (-8.76) -.286 (-7.26) -.189 (-4.80) -.066 (-1.67) .000 (0.00) .124 (3.14) .209 (5.30) .228 (5.79) .174 (4.41) .065 (1.65) -.357 (-9.06) -.279 (-7.08) I.D. NO 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 -.090 (-2.28) .225 (5.71) .135 (3.42) .045 (1.14) -.045 (-1.14) -.135 (-3.42) -.279 (-7.08) -.225 (-5.71) -.279 (-7.08) -.201 (-5.10) -.201 (-5.10) .270 (6.85) .180 (4.57) .090 (2.28) -.201 (-5.10) -.201 (-5.10) -.201 (-5.10) .000 (0.00) -.090 (-2.28) -.180 (-4.57) -.201 (-5.10) -.201 (-5.10) -.123 (-3.12) -.123 (-3.12) -.123 (-3.12) 38 39 40 41 42 43 44 -.270 (-6.85) .315 (8.00) .225 (5.71) .135 (3.42) .045 (1.14) -.123 (-3.12) -.123 (-3.12) -.123 (-3.12) -.045 (-1.14) -.135 (-3.42) Y In. mm Y I.D. NO X In. mm In. mm a b c d -.065 (-1.65) -.174 (-4.41) -.228 (-5.79) -.209 (-5.30) -.124 (-3.14) .000 (0.00) .096 (2.43) .000 (0.00) -.096 (-2.43) -.221 (-5.61) -.151 (-3.83) -.033 (-0.83) .095 (2.41) .193 (4.90) .096 (2.43) .000 (0.00) -.096 (-2.43) .000 (0.00) -.033 (-0.83) .098 (2.48) .217 (5.51) .305 (7.74) .353 (8.96) .230 (5.84) .193 (4.90) .095 (2.41) -.033 (-0.83) e f g h j -.151 (-3.83) -.221 (-5.61) X In. mm -.123 (-3.12) -.123 (-3.12) -.045 (-1.14) -.045 (-1.14) -.045 (-1.14) -.045 (-1.14) -.045 (-1.14) -.045 (-1.14) -.045 (-1.14) -.045 (-1.14) -.045 (-1.14) .045 (1.14) .045 (1.14) .045 (1.14) .045 (1.14) .045 (1.14) Y In. mm I.D. NO -.225 (-5.71) -.315 (-8.00) 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 .360 (9.14) .270 (6.85) .180 (4.57) .090 (2.28) .000 (0.00) -.090 (-2.28) -.180 (-4.57) -.270 (-6.85) -.360 (-9.14) .360 (9.14) .270 (6.85) .180 (4.57) .090 (2.28) .000 (0.00) .045 (1.14) .045 (1.14) .045 (1.14) -.090 (-2.28) -.180 (-4.57) -.270 (-6.85) .045 (1.14) .123 (3.12) -.360 (-9.14) .123 (3.12) .225 (5.71) .315 (8.00) X In. mm .123 (3.12) .123 (3.12) .123 (3.12) .123 (3.12) .123 (3.12) .123 (3.12) Y In. mm .135 (3.42) .045 (1.14) -.045 (-1.14) -.135 (-3.42) -.225 (-5.71) -.315 (-8.00) .201 (5.10) .201 (5.10) .201 (5.10) .201 (5.10) .201 (5.10) .201 (5.10) -.090 (-2.28) -.180 (-4.57) .201 (5.10) .279 (7.08) -.270 (-6.85) .225 (5.71) .279 (7.08) .279 (7.08) .279 (7.08) .279 (7.08) .279 (7.08) .357 (9.06) .357 (9.06) .357 (9.06) .270 (6.85) .180 (4.57) .090 (2.28) .000 (0.00) .135 (3.42) .045 (1.14) -.045 (-1.14) -.135 (-3.42) -.225 (-5.71) .090 (2.28) .000 (0.00) -.090 (-2.28) Geo-Marine® PCB Footprints: Size 20 PCB Footprint Insert Arrangement A J I.D. NO Y In. mm .090 (2.28) .000 (0.00) X In. mm 1 2 3 4 C L 43 Y I.D. NO C V c G L B f d P X A U e D W g c N R C L T S C L .348 (8.83) .306 (7.77) H .121 (3.07) B J K A .353 (8.96) .270 (6.85) L G H .061 (1.54) C L F Insert Arrangement 20-11 11 #12 Contacts A b N E T d C L P E W C L X Z M H Insert Arrangement 20-30 30 #16 Contacts © 2014 Glenair, Inc. U D d e V g f W E X Z M G J a N C F Y L K b I.D. NO B T c D V f A S R U e g a .177 (4.49) (HOLE TO ACCEPT .095 (2.413) MAX CONTACT 11X) Pin Connector C P .123 (3.12) D .227 (5.76) B R c C .332 (8.43) E S L G D F B K .115 (2.92) C Y L K J Pin Connector F G H (HOLE TO ACCEPT .028 (0.711) MAX CONTACT 30X) A B C D E F G H J K X Y In. mm .000 (0.00) In. mm .152 (3.86) .282 (7.16) .369 (9.37) .400 (10.16) .369 (9.37) .282 (7.16) .152 (3.86) .000 (0.00) -.152 (-3.86) Series 22 Geo-Marine® .399 (10.13) .369 (9.37) .282 (7.16) .152 (3.86) .000 (0.00) -.152 (-3.86) -.282 (-7.16) -.369 (-9.37) -.399 (-10.13) -.369 (-9.37) I.D. NO X Y In. mm In. mm L -.282 (-7.16) -.282 (-7.16) M -.369 (-9.37) -.152 (-3.86) N -.400 (-10.16) .000 (0.00) P -.369 (-9.37) .152 (3.86) R -.282 (-7.16) .282 (7.16) S -.152 (-3.86) .369 (9.37) .000 (0.00) T .245 (6.22) U .152 (3.86) .207 (5.25) V .233 (5.91) .076 (1.93) W .233 (5.91) -.076 (-1.93) U.S. CAGE Code 06324 X I.D. NO In. mm X .152 (3.86) Y .000 (0.00) Z -.152 (-3.86) a b c d e f g Y In. mm -.207 (-5.25) -.233 (-5.91) -.233 (-5.91) -.152 (-3.86) -.076 (-1.93) .076 (1.93) .076 (1.93) -.245 (-6.22) -.207 (-5.25) -.076 (-1.93) .076 (1.93) .207 (5.25) .076 (1.93) .076 (1.93) -.076 (-1.93) -.076 (-1.93) -.076 (-1.93) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-13 E-Mail: [email protected] A Geo-Marine® Introduction Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories PCB Footprints Geo-Marine® PCB Footprints: Size 20 (continued) PCB Footprint Insert Arrangement C L .321 (8.15) .208 (5.28) .090 (2.28) A A P N R e M d L f n c m b T C h C L W X Y E .058 (1.47) F J H K .115 (2.92) k Z .173 (4.39) Insert Arrangement 20-38 8 #16 Contacts 30 #22 Contacts J (HOLE TO ACCEPT .021 (0.533) MAX CONTACT 30X) .358 (9.09) T C D V E W .128 (3.25) .302 (7.67) X Y H .230 (5.84) .288 (7.31) h j G B U q l a g p m b L S f n c D V j k Z d M U q l a K R e S g p A P N B G F (HOLE TO ACCEPT .0635 (1.613) MAX CONTACT 8X) .100 (2.54) .199 (5.05) .299 (7.59) Pin Connector C L A W C X j i T h g Z m t r S q E U a F b p c T G H P C L J N L TYP (20 CAVITIES) A j X i ed M 18° 0' W V n f R D Y k s TYP (7 CAVITIES) TYP (13 CAVITIES) B V U 51° 25' 27° 41' S R K Insert Arrangement 20-41 41 #20 Contacts q Z E a b p c M J K L G H d e N F n f P D m t r g C Y k s h B (HOLE TO ACCEPT .028 (0.711) MAX CONTACT 41X) Pin Connector 51 1 31 C L 27 28 26 I.D. NO 1 2 3 4 31 5 24 48 66 53 32 67 68 47 33 65 54 6 23 76 69 77 64 55 46 34 7 22 70 75 79 78 C 45 63 56 35 L 8 71 74 21 44 62 57 36 9 73 72 20 25 79 21 43 19 11 61 71 41 Insert Arrangement 20-79 79 #22 Contacts © 2014 Glenair, Inc. 49 18 50 29 51 61 60 30 52 42 17 41 16 37 58 38 59 39 40 15 14 13 10 11 12 Pin Connector (HOLE TO ACCEPT .021 (0.533) MAX CONTACT 79 X) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 X In. mm .053 (1.35) .146 (3.71) .232 (5.89) .306 (7.77) .365 (9.27) .406 (10.31) .427 (10.84) .427 (10.84) Y In. mm .426 (10.82) .404 (10.26) .362 (9.19) .302 (7.67) .227 (5.76) .141 (3.58) .048 (1.22) -.048 (-1.22) .406 (10.31) .365 (9.27) -.141 (-3.58) -.227 (-5.76) .306 (7.77) .232 (5.89) -.302 (-7.67) -.362 (-9.19) .146 (3.71) .053 (1.35) -.053 (-1.35) -.146 (-3.71) -.232 (-5.89) -.306 (-7.77) -.365 (-9.27) -.406 (-10.31) -.404 (-10.26) -.426 (-10.82) -.426 (-10.82) -.404 (-10.26) -.362 (-9.19) -.302 (-7.67) -.227 (-5.76) -.141 (-3.58) Series 22 Geo-Marine® I.D. NO 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 X Y In. mm -.427 (-10.84) In. mm -.048 (-1.22) -.427 (-10.84) .048 (1.22) -.406 (-10.31) .141 (3.58) .227 (5.76) .302 (7.67) -.365 (-9.27) -.306 (-7.77) -.232 (-5.89) -.146 (-3.71) -.053 (-1.35) .000 (0.00) .098 (2.48) .184 (4.67) .258 (6.55) I.D. NO .362 (9.19) .404 (10.26) .426 (10.82) .323 (8.20) .322 (8.18) .280 (7.11) .220 (5.59) .311 (7.90) .332 (8.43) .141 (3.58) .048 (1.22) .332 (8.43) .311 (7.90) .258 (6.55) -.048 (-1.22) .184 (4.67) -.141 (-3.58) -.220 (-5.59) -.280 (-7.11) .098 (2.48) .000 (0.00) -.322 (-8.18) -.347 (-8.81) U.S. CAGE Code 06324 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 X In. mm -.098 (-2.48) -.184 (-4.67) Y In. mm -.322 (-8.18) -.280 (7.11) -.220 (-5.59) -.258 (-6.55) -.311 (-7.90) -.332 (-8.43) -.141 (-3.58) -.048 (-1.22) -.332 (-8.43) .048 (1.22) -.311 (-7.90) -.258 (-6.55) .141 (3.58) .220 (5.59) .280 (7.11) -.184 (-4.67) -.098 (-2.48) -.048 (-1.22) .048 (1.22) .134 (3.40) .208 (5.28) .237 (6.02) .237 (6.02) .208 (5.28) .134 (3.40) .048 (1.22) -.048 (-1.22) .322 (8.18) .241 (6.12) .241 (6.12) .199 (5.05) .139 (3.53) .048 (1.22) -.048 (-1.22) -.139 (-3.53) -.199 (-5.05) -.241 (-6.12) I.D. NO 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 X In. mm -.134 (-3.40) -.208 (-5.28) -.237 (-6.02) -.237 (-6.02) -.208 (-5.28) -.134 (-3.40) -.048 (-1.22) .048 (1.22) .125 (3.17) .155 (3.94) .125 (3.17) .048 (1.22) -.048 (-1.22) -.125 (-3.17) -.155 (-3.94) -.125 (-3.17) .000 (0.00) .048 (1.22) -.048 (-1.22) Y In. mm -.199 (-5.05) -.139 (-3.53) -.048 (-1.22) .048 (1.22) .139 (3.53) .199 (5.05) .146 (3.71) .146 (3.71) .090 (2.28) .000 (0.00) -.090 (-2.28) -.146 (-3.71) -.146 (-3.71) -.090 (-2.28) .000 (0.00) .090 (2.28) .053 (1.35) -.029 (-0.74) -.029 (-0.74) -.241 (-6.12) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-14 E-Mail: [email protected] Geo-Marine® Introduction Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories PCB Footprints Geo-Marine® PCB Footprints: Size 24 PCB Footprint Insert Arrangement .461 (11.71) .403 (10.23) .230 (5.84) A .472 (11.99) N (HOLE TO ACCEPT .095 (2.413) MAX CONTACT 12X) M D D Z CL E a X L U T a W V F K J S Y M .062 (1.57) T W C R Z .028 (.711) V .323 (8.20) G H .151 (3.83) Insert Arrangement 24-24 12 #16 Contacts 12 #12 Contacts .134 (3.40) F J G E U K H A .100 (2.54) B N S X L A P .234 (5.94) R .298 (7.57) .172 (4.37) C Y .410 (10.41) CL B P .267 (6.78) .186 (4.72) .336 (8.53) .211 (5.36) (HOLE TO ACCEPT .0635 (1.613) MAX CONTACT 12X) .441 (11.2) .495 (12.57) .230 (5.84) .370 (9.40) .413 (10.49) Pin Connector .520 (13.21) .525 (13.33) .390 (9.90) .450 (11.43) .260 (6.60) .375 (9.52) .130 (3.30) A U .300 (.7.62) C L B T C S R X x h p q s f g b e d N M g P L r a s F b .075 (1.90) c e N H q t f E Z z u G Y p y aa C L a c n x v F D X w i R r m j Z z t C W k E y aa u P S Y n v V T W m w B U D V k j i .225 (5.71) .150 (3.81) A G J M K d H J L Insert Arrangement 24-48 48 #16 Contacts K (HOLE TO ACCEPT .0635 (1.613) MAX CONTACT 48X) Pin Connector CL a Z b A Z Y B X U W s V FF r EE q U MM p PP CC n m BB k y g F h AA G i S H CL P r U q T N M EE n S m g z k j i R L F h AA BB E f y KK LL CC D e x JJ PP C d w NN DD B c V MM p K Insert Arrangement 24-61 61 #20 Contacts FF V J R s A b GG HH t E f z j W e x KK U X D w JJ LL DD T d HH NN C c V GG t a Y G H J P N M L K (HOLE TO ACCEPT .028 (0.711) MAX CONTACT 61X) Pin Connector © 2014 Glenair, Inc. Series 22 Geo-Marine® I.D. X NO. In. mm. A B C D E F G H J K L M N P R S T U V W X Y Z - .196 (4.98) .314 (7.98) .413 (10.5) .485 (12.3) .527 (13.4) .536 (13.6) .511 (13.0) .454 (11.5) .368 (9.34) .259 (6.58) .134 (3.40) .000 (.000) .134 (-3.40) .259 (-6.58) .368 (-9.34) .454 (-11.5) .511 (-13.0) .536 (-13.6) .527 (-13.4) .485 (-12.3) .413 (-10.5) .314 (-7.98) .196 (-4.98) Y In. mm. - .500 (12.7) .435 (11.05) .343 (8.71) .230 (5.84) .101 (2.57) .030 (-.762) .164 (-4.165) .287 (-7.29) .391 (-9.93) .470 (-11.94) .519 (-13.18) .537 (-13.64) .519 (-13.18) .470 (-11.94) .391 (-9.93) .287 (-7.29) .164 (-4.16) .030 (-.762) .101 (2.56) .230 (5.84) .343 (8.71) .435 (11.05) .500 (12.7) I.D. X NO. a b c d e f g h i j k In. mm. m n p q r s t u v w x y z .068 (1.72) - .068 (-1.72) .173 (4.39) .285 (7.24) .362 (9.19) .399 (10.1) .392 (9.95) .341 (8.66) .251 (6.37) .133 (3.38) .000 (.000) - .133 (-3.38) - .251 (-6.37) - .341 (-8.66) - .392 (-9.95) - .399 (-10.1) - .362 (-9.19) - .285 (-7.24) - .173 (-4.39) .000 (.000) .147 (3.73) .237 (6.02) .267 (6.78) .228 (5.79) U.S. CAGE Code 06324 Y In. mm. .454 (11.53) .454 (11.53) .363 (9.22) .283 (7.19) .175 (4.44) .046 (1.17) - .088 (-2.24) - .213 (-5.41) - .314 (-7.97) - .379 (-9.63) - .402 (-10.21) - .379 (-9.63) - .314 (-7.97) - .213 (-5.41) - .088 (-2.24) .046 (1.17) .175 (4.44) .283 (7.19) .363 (9.22) .338 (8.58) .223 (5.66) .122 (3.099) - .010 (-.254) - .139 (-3.53) I.D. NO. AA BB CC DD EE FF GG HH JJ KK LL MM NN PP Y X In. mm. In. mm. .131 (3.33) .000 (.000) - .131 (-3.33) - .228 (-5.79) - .267 (-6.78) - .237 (-6.02) - .147 (-3.73) .000 (.000) .105 (2.67) .135 (3.43) .000 (.000) - .135 (-3.43) - .105 (-2.67) .000 (.000) - .233 (-5.92) .267 (-6.78) .233 (-5.92) .139 (-3.53) .010 (-.254) .122 (3.099) .223 (5.66) .200 (5.08) .094 (2.39) - .041 (-1.04) - .132 (-3.35) - .041 (-1.04) .094 (2.39) .000 (.000) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-15 E-Mail: [email protected] Geo-Marine® Introduction Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories PCB Footprints Geo-Marine® PCB Footprints: Size 24 PCB Footprint Insert Arrangement C L 29 10 A 19 40 51 62 73 83 92 3 4 93 94 5 1 99 6 C L 95 7 2 96 8 29 40 51 62 19 9 73 98 83 10 28 93 4 99 6 2 39 50 61 72 82 94 5 1 (HOLE TO ACCEPT .021 (0.533) MAX CONTACT 100X) 91 18 92 3 100 97 95 7 97 8 9 98 91 18 28 39 50 61 72 82 Insert Arrangement 24-100 100 #22 Contacts © 2014 Glenair, Inc. Pin Connector 100 96 I.D. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 - X Y Y In. mm. I.D. NO. X In. mm. In. mm. In. mm. .550 (-13.97) .550 (-13.97) .459 (-11.67) .523 (-13.3) .459 (-11.67) .459 (-11.67) .459 (-11.67) .509 (-12.9) .459 (-11.67) .354 (-8.99) .354 (-8.99) .354 (-8.99) .354 (-8.99) .354 (-8.99) .354 (-8.99) .354 (-8.99) .354 (-8.99) .354 (-8.99) .255 (-6.47) .255 (-6.47) .255 (-6.47) .255 (-6.47) .255 (-6.47) .255 (-6.47) .255 (-6.47) .039 (.990) - .068 (-1.73) .253 (6.42) .175 (4.44) .092 (2.34) - .014 (-.355) - .122 (-3.099) - .215 (-5.46) - .307 (-7.80) .420 (10.67) .315 (8.00) .210 (5.33) .105 (2.67) .000 (.000) - .105 (-2.67) - .210 (-5.33) - .315 (-8.00) - .420 (-10.67) .457 (11.60) .352 (8.94) .247 (6.27) .142 (3.61) .037 (.94) - .068 (-1.73) - .173 (-4.39) 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 .255 (-6.48) .255 (-6.48) .255 (-6.48) .154 (-3.91) - .154 (-3.91) - .154 (-3.91) - .154 (-3.91) - .154 (-3.91) .154 (-3.91) - .154 (-3.91) - .154 (-3.91) - .154 (-3.91) - .154 (-3.91) .154 (-3.91) .053 (-1.35) - .053 (-1.35) - .053 (-1.35) - .053 (-1.35) - .053 (-1.35) - .053 (-1.35) - .053 (-1.35) - .053 (-1.35) - .053 (-1.35) - .053 (-1.35) - .053 (-1.35) - .278 (-7.06) - .383 (-9.73) - .488 (-12.39) .525 (13.34) .420 (10.67) .315 (8.00) .210 (5.33) .105 (2.67) .000 (.000) - .105 (-2.67) - .210 (-5.33) - .315 (-8.00) - .420 (-10.67) - .525 (-13.34) .502 (12.75) .397 (10.08) .292 (7.42) .187 (4.75) .082 (2.08) - .023 (-.58) - .128 (-3.25) - .233 (-5.92) - .338 (-8.58) - .443 (-11.25) - .548 (-13.92) Series 22 Geo-Marine® I.D. NO. 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 X Y In. mm. In. mm. .053 (1.35) .053 (1.35) .053 (1.35) .053 (1.35) .053 (1.35) .053 (1.35) .053 (1.35) .053 (1.35) .053 (1.35) .053 (1.35) .053 (1.35) .154 (3.91) .154 (3.91) .154 (3.91) .154 (3.91) .154 (3.91) .154 (3.91) .154 (3.91) .154 (3.91) .154 (3.91) .154 (3.91) .154 (3.91) .255 (6.48) .255 (6.48) .255 (6.48) .502 (12.75) .397 (10.08) .292 (7.42) .187 (4.75) .082 (2.083) - .023 (-.584) - .128 (-3.25) - .233 (-5.92) - .338 (-8.58) - .443 (-11.25) - .548 (-13.92) .525 (13.34) .420 (10.67) .315 (8.00) .210 (5.33) .105 (2.67) .000 (.000) - .105 (-2.67) - .210 (-5.33) - .315 (-8.00) - .420 (-10.67) - .525 (-13.34) .457 (11.60) .352 (8.94) .247 (6.27) U.S. CAGE Code 06324 I.D. NO. X Y In. mm. In. mm. 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 .255 (6.48) .255 (6.48) .255 (6.48) .255 (6.48) .255 (6.48) .255 (6.48) .255 (6.48) .354 (8.99) .354 (8.99) .354 (8.99) .354 (8.99) .354 (8.99) .354 (8.99) .354 (8.99) .354 (8.99) .354 (8.99) .459 (11.66) .523 (13.28) .459 (11.66) .459 (11.66) .459 (11.66) .509 (12.93) .459 (11.66) .550 (13.97) .550 (13.97) .142 (3.607) .037 (.940) - .068 (-1.73) - .173 (-4.39) - .278 (-7.06) - .383 (-9.73) - .488 (-12.39) .420 (10.67) .315 (8.00) .210 (5.33) .105 (2.67) .000 (.000) - .105 (-2.67) - .210 (-5.33) - .315 (-8.00) - .420 (-10.67) .253 (6.42) .175 (4.44) .092 (2.34) - .014 (-.356) - .122 (-3.10) - .215 (-5.46) - .307 (-7.80) .039 (.991) - .068 (-1.73) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-16 E-Mail: [email protected] Geo-Marine® Introduction Series 22 Geo-Marine® Harsh-Environment Connectors, Cables and Accessories PCB Footprints Geo-Marine® PCB Footprints: Size 24 PCB Footprint Insert Arrangement CL 25 36 15 48 82 59 71 94 105 122 1 123 2 CL 3 124 4 125 126 5 6 127 7 128 14 121 24 25 59 36 82 35 47 94 15 A 115 8 58 81 70 93 104 (HOLE TO ACCEPT .021 (0.533) MAX CONTACT 100X) 114 105 8 48 115 71 1 Pin Connector 122 2 123 124 3 4 125 5 126 127 6 7 128 58 14 81 121 114 24 35 47 70 93 104 Insert Arrangement 24-128 61 #20 Contacts © 2014 Glenair, Inc. X Y In. mm. I.D. NO. In. mm. In. mm. .279 (7.09) .190 (4.82) .095 (2.41) .000 (.000) - .095 (-2.41) - .190 (-4.82) - .279 (-7.09) .357 (9.07) .190 (4.82) .095 (2.41) .000 (.000) - .095 (-2.41) - .190 (-4.82) - .357 (-9.07) .444 (11.27) .332 (8.43) .237 (6.02) .142 (3.607) .047 (1.19) - .047 (-1.19) - .142 (-3.607) - .237 (-6.02) - .332 (-8.43) - .427 (-10.84) .496 (12.6) .380 (9.65) .285 (7.24) .190 (4.82) .095 (2.41) .000 (.000) - .095 (-2.41) - .190 (-4.82) 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 - .249 (-6.32) - .249 (-6.32) - .249 (-6.32) - .160 (-4.06) - .166 (-4.21) - .166 (-4.21) - .166 (-4.21) - .166 (-4.21) - .166 (-4.21) - .166 (-4.21) - .166 (-4.21) - .166 (-4.21) - .166 (-4.21) - .166 (-4.21) - .166 (-4.21) - .083 (-2.11) - .083 (-2.11) - .083 (-2.11) - .083 (-2.11) - .083 (-2.11) - .083 (-2.11) - .083 (-2.11) - .083 (-2.11) - .083 (-2.11) - .083 (-2.11) - .083 (-2.11) .000 (.000) .000 (.000) .000 (.000) .000 (.000) .000 (.000) .000 (.000) -.285 (-7.24) - .380 (-9.65) - .475 (-12.06) .531 (13.48) .427 (10.84) .332 (8.43) .237 (6.02) .142 (3.607) .047 (1.19) - .047 (-1.19) - .142 (-3.607) - .237 (-6.02) - .332 (-8.43) - .427 (-10.84) - .522 (-13.26) .475 (12.06) .380 (9.65) .285 (7.24) .190 (4.82) .095 (2.41) .000 (.000) - .095 (-2.41) - .190 (-4.82) - .285 (-7.24) -.380 (-9.65) - .475 (-12.06) .522 (13.26) .427 (10.84) .332 (8.43) .237 (6.02) .142 (3.607) .047 (1.19) I.D. NO. X Y In. mm. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 - .479 (-12.17) - .520 (-13.21) - .546 (-13.87) - .555 (-14.1) - .546 (-13.87) - .520 (-13.2) - .479 (-12.17) - .424 (-10.77) - .415 (-10.54) - .415 (-10.54) - .415 (-10.54) - .415 (-10.54) - .415 (-10.54) - .424 (-10.77) - .332 (-8.43) - .332 (-8.43) - .332 (-8.43) - .332 (-8.43) - .332 (-8.43) - .332 (-8.43) - .332 (-8.43) - .332 (-8.43) - .332 (-8.43) - .332 (-8.43) - .249 (-6.32) - .249 (-6.32) - .249 (-6.32) - .249 (-6.32) - .249 (-6.32) - .249 (-6.32) - .249 (-6.32) - .249 (-6.32) Series 22 Geo-Marine® I.D. NO. 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 X Y Y In. mm. I.D. NO. X In. mm. In. mm. In. mm. .000 (.000) .000 (.000) .000 (.000) .000 (.000) .000 (.000) .000 (.000) .083 (2.11) .083 (2.11) .083 (2.11) .083 (2.11) .083 (2.11) .083 (2.11) .083 (2.11) .083 (2.11) .083 (2.11) .083 (2.11) .083 (2.11) .160 (4.06) .166 (4.21) .166 (4.21) .166 (4.21) .166 (4.21) .166 (4.21) .166 (4.21) .166 (4.21) .166 (4.21) .166 (4.21) .166 (4.21) .166 (4.21) .249 (6.32) .249 (6.32) .249 (6.32) - .047 (-1.19) - .142 (-3.607) - .237 (-6.02) - .332 (-8.43) - .427 (-10.84) - .555 (-14.1) .475 (12.06) .380 (9.65) .285 (7.24) .190 (4.82) .095 (2.41) .000 (.000) - .095 (-2.41) - .190 (-4.82) - .285 (-7.24) - .380 (-9.65) -.475 (-12.06) .531 (13.5) .427 (10.84) .332 (8.43) .237 (6.02) .142 (3.607) .047 (1.19) - .047 (-1.19) - .142 (-3.607) - .237 (-6.02) - .332 (-8.43) - .427 (-10.84) - .522 (-13.26) .496 (12.6) .380 (9.65) .285 (7.24) 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 .249 (6.32) .249 (6.32) .249 (6.32) .249 (6.32) .249 (6.32) .249 (6.32) .249 (6.32) .249 (6.32) .332 (8.43) .332 (8.43) .332 (8.43) .332 (8.43) .332 (8.43) .332 (8.43) .332 (8.43) .332 (8.43) .332 (8.43) .332 (8.43) .424 (10.77) .415 (10.54) .415 (10.54) .415 (10.54) .415 (10.54) .415 (10.54) .424 (10.77) .479 (12.17) .520 (13.2) .546 (13.87) .555 (14.1) .546 (13.87) .520 (13.2) .479 (12.17) .190 (4.82) .095 (2.41) .000 (.000) .095 (-2.41) .190 (-4.82) .285 (-7.24) .380 (-9.65) .475 (-12.06) .444 (11.27) .332 (8.43) .237 (6.02) .142 (3.607) .047 (1.19) .047 (-1.19) .142 (-3.607) .237 (-6.02) .332 (-8.43) .427 (-10.84) .357 (9.07) .190 (4.82) .095 (2.41) .000 (.000) .095 (2.41) .190 (-4.82) .357 (-9.07) .279 (7.08) .190 (4.82) .095 (2.41) .000 (.000) .095 (-2.41) .190 (-4.82) .279 (-7.08) U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com A-17 E-Mail: [email protected] GEO-MARINE CONNECTORS ® SERIES 22 Geo-Marine ® Standard ∙ scoop-proof ∙ highpressure environmental ∙ hermetic D esigned for use in geophysical and other harsh marine and oil-patch applications, Series 22 Geo-Marine® connectors feature specially designed castellated and knurled coupling nuts for quick connect and disconnect. Single-start, stub Acme threads reduce thread fouling and binding, and an integrated anti-vibration/anti-decoupling mechanism prevents accidental loosening or decoupling. Interfacial, peripheral and piston o-ring seals provide environmental sealing to 5,000 PSI in mated condition. Standard cable plugs (shown below) as well as special-purpose configurations including flange-mount, cable grip, and lanyard quick-disconnect are available. Standard Plug Configurations Cable Plug Flange-Mount Overmold Adapter Overmolded Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000 [email protected] www.glenair.com Geo-Marine® Connectors Series 22 Geo-Marine® Connectors Quick Selection Guide © 2014 Glenair, Inc. High-Pressure Environmental/Hermetic Jam Nut Bulkhead Receptacle, Front Mount 220-00 (Standard) and 220-10 (Scoop-Proof ) B-2 High-Pressure Environmental/Hermetic In-Line Receptacle Connector 220-01 (Standard) and 220-11 (Scoop-Proof ) B-4 High-Pressure Environmental/Hermetic Square Flange Mount Receptacle Connector 220-02 (Standard) and 220-12 (Scoop-Proof ) B-6 B Hermetic Solder-Mount Bulkhead Receptacle Connector, Front Mount 220-03 (Standard) 220-13 (Scoop-Proof ) B-8 High-Pressure Environmental/Hermetic Jam Nut Receptacle with Accessory Threads, Rear Mount 220-04 (Standard) and 220-14 (Scoop-Proof ) B-10 High-Pressure Environmental Cable Plug 220-06 (Standard) and 220-16 (Scoop-Proof ) B-12 High-Pressure Environmental/Hermetic Jam Nut Receptacle, Rear Box Mount 220-07 (Standard) and 220-17 (Scoop-Proof ) B-14 High-Pressure Environmental Box-Mount Plug 220-09 (Standard) and 220-19 (Scoop-Proof ) B-16 High-Pressure Environmental/Hermetic Jam Nut Mount Bulkhead Feed-Through 227-039 (Standard) and 227-040 (Scoop-Proof ) B-18 Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-1 E-Mail: [email protected] Geo-Marine® Connectors 220-00 and 220-10 High-Pressure Environmental/Hermetic Jam Nut Bulkhead Receptacle, Front Mount SERIES 22 RECEPTACLE IN STANDARD OR SCOOP-PROOF SHELL WITH PIN OR SOCKET CONTACTS How To Order Sample Part Number 220-00 Series and Shell Style 220-00 - Standard 220-10 - Scoop-Proof (Not Shown) Class H = Hermetic E = Environmental Shell Size - Insert Arrangement See page A-6 Contact Style P = Pins S = Sockets C = Pin PC Termination D = Socket PC Termination Polarization N, 1, 2, 3, 4 See page A-6 H 24-61 P N Prior to use, lubricate O-rings with high grade silicone lubricant (Moly-kote M55 or equivalent). B 220-00: 1.32 (33.5) Max 220-10: 1.57 (39.9) Max D Flats E Thread Master Key Indicator Red Slot Master Key .050 .75 (19.1) Ref. Piston O-Ring .50 (12.7) Max Panel A Thread Direction of Pressure C Recommended Mtg Hole Dia B Capability - Class H .125 Full Mate Indicator Band See Table I for Insert Arrangement Flange O-Ring .16 (4.1) Ref Ø P (See Table VI) Metric dimensions (mm) are indicated in parentheses © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-2 E-Mail: [email protected] Shell Size 10 12 14 16 18 20 22 24 A Thread Class 2A 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 1/18 - 16 UN 1 1/4 - 16 UN 1 3/8 - 16 UN 1 1/2 - 16 UN Table II: Dimensions C Ø B Max ±.005 ±(0.1) 1.03 (25.4) .635 (16.1) 1.16 (28.6) .760 (19.3) 1.28 (31.8) .885 (22.5) 1.41 (34.9) 1.010 (25.7) 1.66 (40.5) 1.135 (28.8) 1.78 (43.7) 1.260 (32.0) 1.91 (48.1) 1.385 (35.2) 2.03 (50.0) 1.510 (38.4) Geo-Marine® Connectors 220-00 and 220-10 High-Pressure Environmental/Hermetic Jam Nut Bulkhead Receptacle, Front Mount D Flats .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) E Thread Class 2A .750 - .1P - .1L .875 - .1P - .1L 1.000 - .1P - .1L 1.125 - .1P - .1L 1.250 - .1P - .1L 1.375 - .1P - .1L 1.500 - .1P - .1L 1.625 - .1P - .1L Table III: Recommended Jam Nut Installation Torque Values B Torque ± 5% Shell Size Inch - Lbs. Newton Meters 10 95 10.73 12 110 12.43 15.82 14 140 16 170 19.21 18 195 22.03 20 215 24.29 22 235 26.55 24 260 29.38 Table IV: Replacement O-Ring Part Numbers* Shell Size Piston O-Ring Flange O-Ring Table VI 10 2-014 2-016 12 2-016 2-018 14 2-018 2-020 16 2-020 2-023 18 2-023 2-025 20 2-024 2-027 22 2-026 2-029 24 2-028 2-030 *Parker O-Ring Part Numbers. Compound N674-70 Or Equivalent © 2014 Glenair, Inc. Contact Size 22D 20 16 12 Series 22 Geo-Marine® U.S. CAGE Code 06324 Ø P 0.021 0.018 0.024 0.028 0.0635 0.0615 0.095 0.093 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-3 E-Mail: [email protected] Geo-Marine® Connectors 220-01 and 220-11 High-Pressure Environmental/Hermetic In-Line Receptacle SERIES 22 IN-LINE RECEPTACLE IN STANDARD OR SCOOP–PROOF SHELL WITH PIN OR SOCKET CONTACTS How To Order Sample Part Number 220-01 Series and Shell Style 220-01 - Standard 220-11 - Scoop–Proof (Not Shown) Class H = Hermetic E = Environmental Shell Size - Insert Arrangement See page A-6 Contact Style P = Pins S = Sockets Polarization N, 1, 2, 3, 4 See page A-6 H 24-61 P N Prior to use, lubricate O-rings with high grade silicone lubricant (Moly-kote M55 or equivalent). B Master Key C Thread Master Key Indicator (Red Dot) 220-01: 1.19 (30.2) Max 220-11: 1.59 (40.4) Max Piston O-Ring See page A-6 for Insert Arrangement Direction of Pressure B Capability - Class H A Thread Full Mate Indicator Band © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 O-Ring Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-4 E-Mail: [email protected] Shell Size 10 12 14 16 18 20 22 24 Table II: Dimensions A Thread Ø B Max Class 2A 5/8 - 24 UNEF .906 (23.0) 3/4 - 20 UNEF 1.031 (26.2) 7/8 - 20 UNEF 1.156 (29.4) 1 - 20 UNEF 1.359 (34.5) 1 1/18 - 16 UN 1.531 (38.9) 1 1/4 - 16 UN 1.656 (42.1) 1 3/8 - 16 UN 1.781 (45.2) 1 1/2 - 16 UN 1.906 (48.4) Geo-Marine® Connectors 220-01 and 220-11 High-Pressure Environmental/Hermetic In-Line Receptacle C Thread Class 2A .750 - .1P - .1L .875 - .1P - .1L 1.000 - .1P - .1L 1.125 - .1P - .1L 1.250 - .1P - .1L 1.375 - .1P - .1L 1.500 - .1P - .1L 1.625 - .1P - .1L B Table IV: Replacement O-Ring Part Numbers* Shell Size Piston O-Ring 10 2-014 12 2-016 14 2-018 16 2-020 18 2-022 20 2-024 22 2-026 24 2-028 *Parker O-Ring Part Numbers. Compound N674-70 or Equivalent © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-5 E-Mail: [email protected] Geo-Marine® Connectors 220-02 and 220-12 High-Pressure Environmental/Hermetic Square Flange Mount Receptacle SERIES 22 SQUARE FLANGE RECEPTACLE IN STANDARD OR SCOOP-PROOF SHELL WITH PIN OR SOCKET CONTACTS How To Order Sample Part Number 220-02 Series and Shell Style 220-02 - Standard 220-12 - Scoop-Proof Class H = Hermetic E = Environmental Shell Size - Insert Arrangement See page A-6 Contact Style P = Pin S = Socket C = Pin, PC Termination D = Socket, PC Termination Polarization N, 1, 2, 3, 4 See page A-6 E 24-61 P N Prior to use, lubricate o-rings with high grade silicone lubricant (Moly-kote M55 or equivalent). B Master Key Master Key Indicator - Red Dot 220-02: 1.19 (30.2) Max 220-12: 1.30 (33.0) Max (Not Shown) .12 (3.1) Ref. Flange O-ring A Thread F (See Table IV) Recommended Panel Cutout Piston O-ring øP (See Table V) C Typ B Typ Direction of Pressure C Capability - Class H G Thread For Insert Arrangement, See page a-6 and P/N Developemt Color Band for Visual Indication of full Mate © 2014 Glenair, Inc. .125 (3.17) TYP D Tapped mounting hole - Typical (not to break through to dry side of panel). .050 (1.27) TYP Series 22 Geo-Marine® U.S. CAGE Code 06324 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-6 E-Mail: [email protected] Geo-Marine® Connectors 220-02 and 220-12 High-Pressure Environmental/Hermetic Square Flange Mount Receptacle Table II: Dimensions Shell Size A Thread Class 2A B Dim C Dim D Dia +.015 +(0.4) -.000 -(0.0) G Thread Class 2A 10 12 14 16 18 20 22 24 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 1/8 - 16 UN 1 1/4 - 16 UN 1 3/8 - 16 UN 1 1/2 - 6 UN 1.188 (30.2) 1.312 (33.3) 1.438 (36.5) 1.562 (39.7) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.125 (54.0) .938 (23.8) 1.062 (27.0) 1.188 (30.2) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) .844 (21.4) .969 (24.6) 1.078 (27.4) 1.219 (31.0) 1.359 (34.5) 1.515 (38.5) 1.640 (41.7) 1.765 (44.8) .750 - .1P - .1L .875 - .1P - .1L 1.000 - .1P - .1L 1.125 - .1P - .1L 1.250 - .1P - .1L 1.375 - .1P - .1L 1.500 - .1P - .1L 1.625 - .1P - .1L B Table VI: Replacement O-Ring Part Numbers Piston Flange Shell Size O-Ring O-Ring 10 2-014 2-021 12 2-016 2-023 14 2-018 2-025 16 2-020 2-027 18 2-022 2-029 20 2-024 2-030 22 2-026 2-031 24 2-028 2-032 *Parker o-ring part numbers Compound N674-70 or equivalent. Table IV: Mounting/Hardware Information Shell Size F Dia Mtg Screw Ref. 10 .125 (3.2) No. 4 12 .125 (3.2) No. 4 14 .125 (3.2) No. 4 16 .125 (3.2) No. 4 18 .125 (3.2) No. 4 20 .125 (3.2) No. 4 22 .125 (3.2) No. 4 24 .156 (4.0) No. 6 Table V Contact Size Ø P 0.021 0.018 0.024 0.028 0.0635 0.0615 0.095 0.093 22D 20 16 12 © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-7 E-Mail: [email protected] Geo-Marine® Connectors 220-03 and 220-13 Hermetic Solder Mount Bulkhead Receptacle Front Mount SERIES 22 RECEPTACLE IN STANDARD OR SCOOP-PROOF SHELL WITH PIN OR SOCKET CONTACTS How To Order Sample Part Number 220-13 Scoop-Proof Shell Series and Shell Style 220-03 - Standard 220-13 - Scoop-Proof Class H = Hermetic Shell Size - Insert Arrangement See page A-6 Contact Style P = Pins S = Sockets C = Pin, PC Termination D = Socket, PC Termination Polarization N, 1, 2, 3, 4 See page A-6 Master Key Indicator - Red Dot .050 TYP .125 TYP D Thread Piston O-Ring Direction of Pressure Capability - Class H For Insert Arrangement, See Table I and P/N Developemt H 24-61 P N Prior to use, lubricate O-rings with high grade silicone lubricant (Moly-kote M55 or equivalent). B Master Key 220-03 B 220-03: 0.65 (16.5) Max 220-13: 0.70 (17.8) Max Ø P See Table IV Recommended Panel Cutout A Color Band for Visual Indication of full Mate .06 (1.5) C .06 (1.5) 220-03: .65 (16.5) Max 220-13: .70 (17.8) Max © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-8 E-Mail: [email protected] Geo-Marine® Connectors 220-03 and 220-13 Hermetic Solder Mount Bulkhead Receptacle Front Mount Table II: Dimensions Shell Size A Dia Max B Dia C Dia +.010 +(0.3) -.000 -(0.0) D Thread Class 2A 10 12 14 16 18 20 22 24 .870 (22.1) .995 (25.3) 1.120 (28.4) 1.245 (31.6) 1.370 (34.8) 1.495 (38.0) 1.620 (41.1) 1.745 (44.3) 1.00 (25.4) 1.13 (28.7) 1.25 (31.8) 1.38 (35.1) 1.50 (38.1) 1.63 (41.4) 1.75 (44.5) 1.88 (47.8) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) .750 - .1P - .1L .875 - .1P - .1L 1.000 - .1P - .1L 1.125 - .1P - .1L 1.250 - .1P - .1L 1.375 - .1P - .1L 1.500 - .1P - .1L 1.625 - .1P - .1L B Table IV: Contact Dimensions Contact Size Ø P 0.021 22D 0.018 0.024 20 0.028 0.0635 16 0.0615 0.095 12 0.093 Table V: Replacement O-Ring Part Numbers * Shell Size Piston O-Ring 10 12 14 16 18 20 22 24 2-014 2-016 2-018 2-020 2-022 2-024 2-026 2-028 * Parker O-ring part numbers. Compound N674-70 or equivalent. © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-9 E-Mail: [email protected] Geo-Marine® Connectors 220-04 and 220-14 High-Pressure Environmental/Hermetic Jam Nut Receptacle with Accessory Threads, Rear Mount SERIES 22 RECEPTACLE IN STANDARD OR SCOOP-PROOF SHELL WITH PIN OR SOCKET CONTACTS How To Order Sample Part Number 220-04 E 24 -61 Series and Shell Style 220-04 - Standard 220-14 - Scoop-Proof Class H = Hermetic E = Environmental Shell SizeInsert Arrangement See page A-6 Contact Style P = Pins S = Sockets C = Pin, P.C. Term (Hermetic Only, See Table VI) D = Socket, P.C. Term (Hermetic Only, See Table VI) Polarization N, 1, 2, 3, 4 See page A-6 P N Prior to use, lubricate O-rings with high grade silicone lubricant (Moly-kote M55 or equivalent). B B Jam Nut 220-04 1.82 Max 220-14 2.07 Max Master Key Indicator Red Dot (See Note I) Flange O-Ring G Thread Polarizing Keys .50 Max Panel Accommodation .059 Max øP Hermetic Only See Table IV Piston O-Ring ØA E ØC Direction of Pressure Capability-See Note 2 .125 Typ Color Band For Visual Indication Of Full Mate For Insert Arrangement, See page A-6 & Part Number Development © 2014 Glenair, Inc. .050 Typ D Thread Recommended Panel Cutout F Thread (Modified Major) Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-10 E-Mail: [email protected] Geo-Marine® Connectors 220-04 and 220-14 High-Pressure Environmental/Hermetic Jam Nut Receptacle with Accessory Threads, Rear Mount Table II: Dimensions A Dia B Flats C Dia ±.005±(0.1) D Thread Class 2A 1.25 (31.8) 1.38 (35.1) 1.50 (38.1) 1.63 (41.4) 1.75 (44.5) 1.88 (47.8) 2.00 (50.8) 2.12 (53.8) 1.125 (28.6) 1.250 (31.8) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.125 (54.0) .885 (22.5) 1.010 (25.7) 1.135 (28.8) 1.260 (32.0) 1.385 (35.2) 1.510 (38.4) 1.635 (41.5) 1.760 (44.7) 7/8 - 20 UNEF 1 - 20 UNEF 1 1/8 - 16 UN 1 1/4 - 16 UN 1 3/8 - 16 UN 1 1/2 - 16 UN 1 5/8 - 16 UN 1 3/4 - 16 UN B Table II: Dimensions (continued) Shell Size E ±.005 ±(0.1) F Thread Class 2A G Thread Class 2A 10 12 14 16 18 20 22 24 .835 (21.2) .960 (24.4) 1.085 (27.6) 1.210 (30.7) 1.335 (33.9) 1.460 (37.1) 1.585 (40.3) 1.710 (43.4) 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 1/8 - 16 UN 1 1/4 - 16 U N 1 3/8 - 16 UN 1 1/2 - 16 UN .750 - .1P - .1L .875 - .1P - .1L 1.000 - .1P - .1L 1.125 - .1P - .1L 1.250 - .1P - .1L 1.375 - .1P - .1L 1.500 - .1P - .1L 1.625 - .1P - .1L Table IV Contact Size 22D 20 16 12 Ø P 0.021 0.018 0.024 0.028 0.0635 0.0615 0.095 0.093 Table V: Replacement O-Ring Part Numbers * Shell Size Piston O-Ring Flange O-Ring 10 2-014 2-021 12 2-016 2-023 14 2-018 2-025 16 2-020 2-027 18 2-022 2-029 20 2-024 2-030 22 2-026 2-031 24 2-028 2-032 * Parker O-ring part numbers. Compound N674-70 or equivalent. © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-11 E-Mail: [email protected] Geo-Marine® Connectors 220-06 and 220-16 High-Pressure Environmental Cable Plug SERIES 22 CABLE PLUG IN STANDARD OR SCOOP-PROOF SHELL WITH PIN OR SOCKET CONTACTS How To Order Sample Part Number 220-06 Series and Shell Style 220-06 - Standard 220-16 - Scoop-Proof Class E = High-Pressure Environmental Shell Size - Insert Arrangement See page A-6 Contact Style P = Pin S = Socket Polarization N, 1, 2, 3, 4 See page A-6 E 24-61 S N B 220-06: 1.19 (30.2) Max 220-16: 1.59 (40.4) Max Flat Compression Seal Polarizing Keyway .66 (16.8) Ref C Thread B Dia. See page A-6 for Insert Arrangement A Thread (Modified Major) Knurl Style Mfr Option Metric dimensions (mm) are indicated in parentheses © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-12 E-Mail: [email protected] Geo-Marine® Connectors 220-06 and 220-16 High-Pressure Environmental Cable Plug Shell Size 10 12 14 16 18 20 22 24 Table II: Dimensions A Thread Class 2A Ø B Max 5/8 - 24 UNEF 1.000 (25.4) 3/4 - 20 UNEF 1.125 (28.6) 7/8 - 20 UNEF 1.250 (31.8) 1 - 20 UNEF 1.375 (34.9) 1 1/18 - 16 UN 1.594 (40.5) 1 1/4 - 16 UN 1.719 (43.7) 1 3/8 - 16 UN 1.894 (48.1) 1 1/2 - 16 UN 1.969 (50.0) C Thread Class 2B .750 - .1P - .1L .875 - .1P - .1L 1.000 - .1P - .1L 1.125 - .1P - .1L 1.250 - .1P - .1L 1.375 - .1P - .1L 1.500 - .1P - .1L 1.625 - .1P - .1L Table IV: Replacement Flat Compression Seal Shell Size Glenair Part No. 10 G70653-10 12 G70653-12 14 G70653-14 16 G70653-16 18 G70653-18 20 G70653-20 22 G70653-22 24 G70653-24 B Table V: Recommended Coupling Nut Assembly Torque Values Inch - Pounds Newton - Meters Shell Size Min Max Min Max 10 20 40 2.26 4.52 12 20 40 2.26 4.52 14 30 50 3.39 5.65 16 30 50 3.39 5.65 18 40 60 4.52 6.78 20 50 70 5.65 7.91 22 60 80 6.78 9.04 24 80 100 9.04 11.30 © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-13 E-Mail: [email protected] Geo-Marine® Connectors 220-07 and 220-17 High-Pressure Environmental/Hermetic Jam Nut Receptacle, Rear Box Mount SERIES 22 JAM NUT RECEPTACLE WITH PIN, SOCKET, PIN PCB OR SOCKET PCB CONTACTS How To Order Sample Part Number 220-07 H 24-61 Series and Shell Style 220-07 - Standard 220-17 - Scoop-Proof Class H = Hermetic E = Environmental Shell SizeInsert Arrangement See page A-6 Contact Style P = Pin S = Socket C = Pin PCB D = Socket PCB Polarization N, 1, 2, 3, 4 See page A-6 P N Prior to use, lubricate O-rings with high grade silicone lubricant (Moly-kote M55 or equivalent). B 220-07: 1.32 (33.5) Max 220-17: 1.57 (39.9) Max Flange O-Ring Master Key Indicator Red Dot E Jam Nut B Thread Recommended Panel Cutout .18 (4.8) Piston O-Ring Direction of Pressure Master Key D G Capability - Class H H (See Table V) C Thread .16 (4.1) Ref .50 (12.7) Max Panel Accommodation .125 Typ F .050 Typ © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-14 E-Mail: [email protected] Shell Size 10 12 14 16 18 20 22 24 Table II: Dimensions B Thread C Thread D E Class 2A Class 2A Dia Flats .750 - .1P - .1L 7/8 - 20 UNEF 1.25 (31.8) 1.125 (28.6) .875 - .1P - .1L 1 - 20 UNEF 1.38 (35.1) 1.250 (31.8) 1.000 - .1P - .1L 1 1/8 - 16 UN 1.50 (38.1) 1.500 (38.1) 1.125 - .1P - .1L 1 1/4 - 16 UN 1.63 (41.4) 1.625 (41.3) 1.250 - .1P - .1L 1 3/8 - 16 UN 1.75 (44.5) 1.750 (44.5) 1.375 - .1P - .1L 1 1/2 - 16 UN 1.88 (47.8) 1.875 (47.6) 1.500 - .1P - .1L 1 5/8 - 16 UN 2.00 (50.8) 2.000 (50.8) 1.625 - .1P - .1L 1 3/4 - 16 UN 2.12 (53.8) 2.125 (54.0) Geo-Marine® Connectors 220-07 and 220-17 High-Pressure Environmental/Hermetic Jam Nut Receptacle, Rear Box Mount F Dia G ±.005± (0.1) ±.005± (0.1) .885 (22.5) .835 (21.2) 1.010 (25.7) .960 (24.4) 1.135 (28.8) 1.085 (27.6) 1.260 (32.0) 1.210 (30.7) 1.385 (35.2) 1.335 (33.9) 1.510 (38.4) 1.460 (37.1) 1.635 (41.5) 1.585 (40.3) 1.760 (44.7) 1.710 (43.4) Metric dimensions (mm) are indicated in parentheses. B Table IV: Replacement O-Ring Part Numbers * Shell Size Piston O-Ring Flange O-Ring 10 2-014 12 2-016 14 2-018 16 2-020 18 2-022 20 2-024 22 2-026 24 2-028 * Parker O-ring part numbers. Compound N674-70 or equivalent. Table V: Recommended Jam Nut Installation Torque Values Torque ± 5% Shell Size Inch-Pounds Newton-Meters 10 95 10.73 12 110 12.43 14 140 15.82 16 170 19.21 18 195 22.03 20 215 24.29 22 235 26.55 24 260 29.38 © 2014 Glenair, Inc. Series 22 Geo-Marine® 2-021 2-023 2-025 2-027 2-029 2-030 2-031 2-032 Table VI: Contact Diameter Contact Size H Dia 12 (2.413/2.362) 16 .0635/.0615 20 (0.711/0.610) 22D .021/.018 (0.533/0.457) U.S. CAGE Code 06324 .095/.093 (1.613/1.549) .024/.028 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-15 E-Mail: [email protected] Geo-Marine® Connectors 220-09 and 220-19 High-Pressure Environmental Box-Mount Plug SERIES 22 BOX-MOUNT PLUG WITH PIN OR SOCKET CONTACTS How To Order Sample Part Number 220-09 Series and Shell Style 220-09 - Standard 220-19 - Scoop-Proof Class E = High-Pressure Environmental Shell Size - Insert Arrangement See page A-6 Contact Style P = Pins S = Sockets Polarization N, 1, 2, 3, 4 See page A-6 E 24-61 P N B 220-09: 1.25 (31.8) Max 220-19: 1.65 (41.9) Max E Typ Master Keyway F Typ Flange O-Ring Flat Compression Seal .72 (18.3) Ref B Thread Adapter O-Ring D Typ G C .100 (2.54) © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-16 E-Mail: [email protected] Geo-Marine® Connectors 220-09 and 220-19 High-Pressure Environmental Box-Mount Plug Table II : Dimensions Shell Size B Thread Class 2B C Dia Max D Dim E Dim F Dia 10 12 14 16 18 20 22 24 .750 - .1P - .1L .875 - .1P - .1L 1.000 - .1P - .1L 1.125 - .1P - .1L 1.250 - .1P - .1L 1.375 - .1P - .1L 1.500 - .1P - .1L 1.625 - .1P - .1L 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.594 (40.5) 1.719 (43.7) 1.844 (46.8) 1.969 (50.0) 1.09 (27.7) 1.19 (30.2) 1.25 (31.8) 1.34 (34.0) 1.44 (36.6) 1.55 (39.4) 1.72 (43.7) 1.85 (47.0) .844 (21.4) .938 (23.8) 1.000 (25.4) 1.094 (27.8) 1.188 (30.2) 1.281 (32.5) 1.375 (34.9) 1.500 (38.1) .125 (3.2) .125 (3.2) .125 (3.2) .125 (3.2) .125 (3.2) .125 (3.2) .125 (3.2) .156 (4.0) Mtg Screw Ref. No. 4 No. 4 No. 4 No. 4 No. 4 No. 4 No. 4 No. 6 G Panel Cutout .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) B Table III: Recommended Coupling Nut Assembly Torque Values Inch - Pounds Newton - Meters Shell Size Min Max Min Max 10 20 40 2.26 4.52 12 20 40 2.26 4.52 14 30 50 3.39 5.65 16 30 50 3.39 5.65 18 40 60 4.52 6.78 20 50 70 5.65 7.91 22 60 80 6.78 9.04 24 80 100 9.04 11.30 Shell Size 10 12 14 16 18 20 22 24 © 2014 Glenair, Inc. Seal Replacement Part Numbers Adapter Flange O-Ring O-Ring 2-014 2-019 2-016 2-021 2-018 2-022 2-020 2-024 2-022 2-025 2-024 2-027 2-026 2-029 2-028 2-030 Series 22 Geo-Marine® Compression Flat Seal G70653-10 G70653-12 G70653-14 G70653-16 G70653-18 G70653-20 G70653-22 G70653-24 U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-17 E-Mail: [email protected] Geo-Marine® Connectors 227-039 and 227-040 High-Pressure Environmental/Hermetic Jam Nut Mount Bulkhead Feed-Through JAM NUT BULKHEAD FEED-THROUGH FOR PANEL THICKNESSES UP TO 8 INCHES How To Order Sample Part Number B 227-040 -24-61 Series and Shell Style 227-039 - Standard shell (mates with 220-06 plug) 227-040 - Scoop-Proof shell (mates with 220-016) Shell Size - Insert Arrangement See page A-6 Side A Contact Style P = Pins S = Sockets H = Hermetic Pin Side A Polarization N, 1, 2, 3, 4 See page A-6 Side B Contact Style P = Pin S = Socket H = Hermetic Pin Side B Polarization N, 1, 2, 3, 4 See page A-6 Bulkhead Thickness Dash No. See Table III Double O-Ring Option D (Omit for None) D Across Flats and Jam Nut S N P N 03 D Insert Arrangement See Note 3 Length Ref. Bulkhead Thickness (Table III) E Recommended Mtg Hole Dia C Dia Side "A" Side "B" A Thread O-Ring Insert Arrangement See Note 3 Polarizing Key Typ. B Thread Typ. Double O-Ring Option Not Available on -01 panel thickness. Color Band For Visual Identification of Full Mating (Typ. Both Sides) Direction of Pressure E Dia Ref. 32 30° E Dia See Note 2 Recommended Panel Cutout © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-18 E-Mail: [email protected] Geo-Marine® Connectors 227-039 and 227-040 High-Pressure Environmental/Hermetic Jam Nut Mount Bulkhead Feed-Through Table II: Dimensions Shell Size A Thread Class 2A B Thread Class 2A C Dia D Flat E Dia * 10 7/8-20 UNEF .750-.1P-.1L 1.41 (35.8) 1.250 (31.8) .875 (22.2) 12 1-20 UNEF .875-.1P-.1L 1.53 (38.9) 1.375 (34.9) 1.000 (25.4) 14 1 1/8-18 UNEF 1.000-.1P-.1L 1.66 (42.2) 1.500 (38.1) 1.125 (28.6) 16 1 1/4-16 UN 1.125-.1P-.1L 1.78 (45.2) 1.625 (41.3) 1.250 (31.8) 18 1 3/8-16 UN 1.250-.1P-.1L 1.91 (48.5) 1.750 (44.5) 1.375 (34.9) 20 1 1/2-16 UN 1.375-.1P-.1L 2.03 (51.6) 1.875 (47.6) 1.500 (38.1) 22 1 5/8-16 UN 1.500-.1P-.1L 2.16 (54.9) 2.000 (50.8) 1.625 (41.3) 24 1 3/4-16 UN 1.625-.1P-.1L 2.28 (57.9) 2.125 (54.0) 1.750 (44.5) * Standard Shell +.010 (.254) -.000 (.0) * Double “O” Ring Option +.002 (.05) -.000 (.0) B Table III: Panel Thickness Dash No. Panel Min Panel Max 01 02 03 04 05 06 07 08 .03 (.8) 1.00 (25.4) 2.00 (50.8) 3.00 (76.2) 4.00 (101.6) 5.00 (127.0) 6.00 (152.4) 7.00 (177.8) 1.00 (25.4) 2.00 (50.8) 3.00 (76.2) 4.00 (101.6) 5.00 (127.0) 6.00 (152.4) 7.00 (177.8) 8.00 (203.2) Length (Ref.) Standard Shell Length Scoop-Proof Shell Length 2.30 (58.4) 3.30 (83.8) 4.30 (109.2) 5.30 (134.6) 6.30 (160.0) 7.30 (185.4) 8.30 (210.8) 9.30 (236.2) 3.00 (76.2) 4.00 (101.6) 5.00 (127.0) 6.00 (152.4) 7.00 (177.8) 8.00 (203.2) 9.00 (228.6) 10.00 (254.0) Notes 1.Power to a given contact on one end will result in power to contact directly opposite, regardless of identification letter. 32 2.For standard o-ring option, √ does not apply and E dia s/b +.010 -.000 3.For pin/pin and skt/skt, symmetrical layouts only, consult factory for available insert arrangements. © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-19 E-Mail: [email protected] BACKSHELLS AND ACCESSORIES SERIES 22 Geo-Marine ® Complete harsh-environment interconnect system protection T he Glenair Series 22 Geo-Marine® full-spectrum product line includes a range of fixed or variable entry molding adapters, straight and 90° strainrelief backshells, and metal or composite covers for protection and sealing of Geo-Marine® plugs and receptacles. Glenair can also design and fabricate wired and overmolded Geo-Marine® cable assemblies for the ultimate harshenvironment sealing protection. Glenair Geo-Marine® accessories and backshells are in stock and available for immediate shipment. Contact the factory for further details to meet specific application needs. Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000 [email protected] www.glenair.com Geo-Marine® Accessories Geo-Marine® Backshells, Connector Accessories and Overmolded Cable Assemblies Accessories for front and back-end protection— plus turnkey overmolded cordsets Cable sealing backshells, strain-reliefs and protective covers extend the life of Geo-Marine® interconnect systems Glenair Geo-Marine® connector accessories are ideally suited for use in harsh environments where resistance to high temperatures, outgassing, corrosive fluids, fire, shock and vibration is required. Corrosive resistant stainless steel connector accessories (SAE-AMSQQ-S-763 AISI 300 Series) are passivated to ASTM A967. Harshenvironment overmolded cables are available in point-to-point or complex multibranch configurations, or pigtails terminated with non-hydroscopic potting compound. Product Features Protective covers effectively seal unmated connectors up to 5000 psi and provide robust mechanical protection to connector contacts and threads Turnkey overmolded cordsets for complete high-pressure, harsh-environment interconnect protection Part No. 290-011 290-012 290-003 290-004 297W-003 290-009 290-010 290-016 667-011 667-012 Quick Selection Guide Description Fixed SST moldinding adapter Variable entry SST molding adapter Straight or 90° Strain-relief backshell Straight or 90° Environmental Strain Relief backshell EMI/RFI Strain Relief Backshell Metal shell protective plug cover Metal shell protective receptacle cover Metal shell protective scoop-proof plug cover Composite shell protective plug cover Composite shell protective receptacle cover Page C-2 C-2 C-4 C-4 C-6 C-8 C-9 C-10 C-14 C-14 Passivated stainless steel, aluminum, and composite thermoplastic accessories available Environmental and strain-relief backshells in straight and 90° versions © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-1 E-Mail: [email protected] C Geo-Marine® Accessories 290-011 and 290-012 Stainless Steel Molding Adapters STAINLESS STEEL MOLDING ADAPTERS, STANDARD OR WITH OPTIONAL CABLE ENTRY DIAMETERS Tips How To Order Sample Part Number 290WS011 Basic Number 290WS011 Shell Size See Table I –18 • Select a molding adapter which will provide adequate inside working room to accept the termination envelope, especially if there are shield terminations, splices, etc. How To Order Sample Part Number 290WS012 Basic Number 290WS012 Shell Size See Table II Cable Entry Size See Table II To select the appropriate molding adapter, consider the following basic suggestions to ensure a high integrity, quality molded termination: –18 12 • If the termination is to be molded with neoprene or other material using a transfer molding process, select the molding adapter cable entry diameter close to the outside diameter of the cable or termination envelope. Notes 1.Prior to use, lubricate O-rings with high grade silicone lubricant (Molykote M55 or equivalent). 2.Material: Adapter - stainless steel. O-ring - nitrile 290WS011 STANDARD Tightening & Staking Indentations 1.28 (32.5) Max O-ring A Thread A Thread .60 (15.2) B D 290WS012 OPTIONAL CABLE ENTRY DIAMETERS 2.00 (50.8) Max O-ring C D E .60 (15.2) F G Tightening & Staking Indentations © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-2 E-Mail: [email protected] Geo-Marine® Accessories 290-011 and 290-012 Stainless Steel Molding Adapters Table I: 290WS011 Fixed Entry Dimensions A Thread Class 2B B Dia Max C Dia 5/8 - 24 UNEF .855 (21.7) .430 (10.9) 3/4 - 20 UNEF .965 (24.5) .535 (13.6) 7/8 - 20 UNEF 1.090 (27.7) .660 (16.8) 1 - 20 UNEF 1.220 (31.0) .785 (19.9) 1 1/8 - 16 UN 1.370 (34.8) .880 (22.4) 1 1/4 - 16 UN 1.525 (38.7) 1.005 (25.5) 1 3/8 - 16 UN 1.655 (42.0) 1.130 (28.7) 1 1/2 - 16 UN 1.775 (45.1) 1.255 (31.9) Shell Size 10 12 14 16 18 20 22 24 D Dia .670 (17.0) .780 (19.8) .905 (23.0) 1.020 (25.9) 1.135 (28.8) 1.250 (31.8) 1.383 (35.1) 1.510 (38.4) Table II: 290WS012 Variable Entry Dimensions Shell Size A Thread Class 2B E Dia Max 10 5/8 - 24 UNEF .855 (21.7) 12 3/4 - 20 UNEF .965 (24.5) 14 7/8 - 20 UNEF 1.090 (27.7) 16 1 - 20 UNEF 1.220 (31.0) 18 1 1/8 - 16 UN 1.370 (34.8) 20 1 1/4 - 16 UN 1.525 (38.7) 22 1 3/8 - 16 UN 1.655 (42.0) 24 1 1/2 - 16 UN 1.775 (45.1) Max Entry 12 16 20 24 Table IV: Torque Values G Dia .670 (17.0) .535 (13.6) .780 (19.8) .660 (16.8) .905 (23.0) .785 (19.9) 1.020 (25.9) .880 (22.4) 1.135 (28.8) 1.005 (25.5) 1.250 (31.8) 1.130 (28.7) 1.383 (35.1) 1.255 (31.9) 1.510 (38.4) Table V: Replacement O-Ring Part Numbers * 10 12 Torque ± 5 In. Lbs. 80 100 14 16 18 20 22 24 120 120 140 140 140 150 Entry No. F Dia .430 (10.9) Shell Size Piston O-Ring 10 12 14 16 18 20 22 24 2-014 2-016 2-018 2-020 2-022 2-024 2-026 2-028 C * Parker o-ring part numbers. Compound N674-70 or equivalent. Instructions for using cable molding adapters 1.Slide 290WS011/012 adapter over cable 2.Prepare cable and wires 3.If using shrink sleeves, slide them over wire insulation and solder terminated wires to solder cup contacts; slide shrink sleeves to correct position and apply recommended heat. 4.Slide 290WS011/012 adapter and attach hand-tight to plug connector. 5.Use Plug Holding Tool (P/N 600-005) along with Hand Held Torque Wrench (P/N 600-076) and Spanner Wrench (P/N 600171) to tighten to recommended torque value. © 2014 Glenair, Inc. Please note that the “tightening/staking indentations” are on the 290WS011/012Adapter, NOT on the Marine Bronze Coupling Nut. The “holes” in the coupling nut retain the spring for the anti-decoupling feature of the cable plug. The TG70 Strap Wrench and the 600-076 Torque Wrench should be utilized to properly torque the cable/plug assembly to the appropriate receptacle Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-3 E-Mail: [email protected] Geo-Marine® Accessories 290-003 and 290-004 Strain-Relief Clamps and Environmental Backshells 90°, 45° OR STRAIGHT ENVIRONMENTAL BACKSHELL AND/OR CABLE CLAMP How To Order Sample Part Number O-Ring (290-004 only) A Thread Length (Note 1) A 003 NF 16 290 Connector Designator W Angular Function A = 90° H = 45° S = Straight Basic Part Number 003 = Strain Relief 004 = Environmental Seal/Strain Relief Material/Finish B, G, M, GB, NF, Z1 See Table IV, Shell Size 10, 12, 14, 16, 18, 20, 22, 24, 28 See Table I Cable Entry Dash No. 04, 06, 08, 10, 12, 16, 18, 20, 24, 28, 32 See Table II Strain Relief Style H = Cable Clamp, Table II K = Cable Grip, Table III Length (S Only) 1/2 inch Increments, e.g. 6 = 3.0 inches; See Note 2 1.25 (31.8) Max A Thread Cable Sealing Grommet (290B 004 only) Cable Range B W Product Series O-Ring (290-004 only) F 290 E O-Ring (290-004 only) C H 6 Length (Note 1) B D Angular Function A, 90° F Cable Sealing Grommet (290-004 only) Direct-Coupling Style 1 10 Stepped Coupling Style 2 (Note 2) Cable Range E 1.25 Max H D J G Strain-Relief Style K Angular Function H, 45° © 2014 Glenair, Inc. Cable Grip Table III Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-4 E-Mail: [email protected] Geo-Marine® Accessories 290-003 and 290-004 Strain-Relief Clamps and Environmental Backshells Table I: Connector Mating Dimensions Shell A Thread B Dia Size Class 2B Max 10 5/8-24 UNEF 0.781 (19.8) 12 3/4-20 UNEF 0.906 (23.0) 14 7/8-20 UNEF 1.031 (26.2) 16 1 -20 UNEF 1.156 (29.4) 18 1 1/8-16 UN 1.281 (32.5) 20 1 1/4-16 UN 1.406 (35.7) 22 1 3/8-16 UN 1.531 (38.9) 24 1 1/2-16 UN 1.656 (42.1) 28 1 5/8-18 UNEF 1.781 (45.2) Table II: Backshell and Style H Dimension Dash No. C Max 04 06 08 10 12 16 20 24 28 32 0.94 0.98 1.03 1.09 1.12 1.25 1.41 1.41 1.60 1.60 (23.9) (24.9) (26.2) (27.7) (28.4) (31.8) (35.8) (35.8) (40.6) (40.6) Dash No 03 04 06 08 10 12 14 16 20 24 D Max 1.16 1.22 1.25 1.32 1.36 1.45 1.65 1.65 1.88 1.88 (29.5) (31.0) (31.8) (33.5) (34.5) (36.8) (41.9) (41.9) (47.8) (47.8) E Max 0.957 1.145 1.332 1.332 1.551 1.770 2.113 2.363 2.770 3.020 F Max (24.3) 0.780 (19.8) (29.1) 0.780 (19.8) (33.8) 0.780 (19.8) (33.8) 0.780 (19.8) (39.4) 0.811 (20.6) (45.0) 0.905 (23.0) (53.7) 1.092 (27.7) (60.0) 1.124 (28.5) (70.4) 1.399 (35.5) (76.7) 1.399 (35.5) Table III: Style K Dimensions Grip Range G Length Ref Min Max 2.12 (53.8) 0.180 (4.6) 0.210 (5.3) 2.75 (69.9) 0.210 (5.3) 0.310 (7.9) 4.00 (101.6) 0.310 (7.9) 0.438 (11.1) 4.12 (104.6) 0.438 (11.1) 0.500 (12.7) 4.37 (111.0) 0.500 (12.7) 0.625 (15.9) 6.00 (152.4) 0.625 (15.9) 0.750 (19.1) 5.00 (127.0) 0.750 (19.1) 0.875 (22.2) 6.00 (152.4) 0.875 (22.2) 1.000 (25.4) 6.25 (158.8) 1.000 (25.4) 1.250 (31.8) 7.25 (184.2) 1.125 (28.6) 1.375 (34.9) Notes 1. Assembly identified with manufacturer’s name and P/N, space permitting. 2. Standard minimum length for Style I is 1.50 Inch, for Style II is 2.00 Inches. For shorter length, consult factory. Note: applies to Sym S, straight, only. 3. When cable diameter exceeds inside diameter or connector shell, Style II will be supplied. © 2014 Glenair, Inc. H Max 0.74 0.76 0.78 0.80 0.82 0.87 1.14 1.14 1.27 1.27 J Max (18.8) (19.3) (19.8) (20.3) (20.8) (22.1) (29.0) (29.0) (32.3) (32.3) Sym B G M N GB NF Z1 0.95 0.98 1.00 1.03 1.05 1.09 1.35 1.35 1.43 1.43 (24.1) (24.9) (25.4) (26.2) (26.7) (27.7) (34.3) (34.3) (36.3) (36.3) Cable Entry Min Max 0.125 (3.2) 0.312 (7.9) 0.250 (6.4) 0.437 (11.1) 0.312 (7.9) 0.562 (14.3) 0.350 (8.9) 0.625 (15.9) 0.500 (12.7) 0.750 (19.1) 0.625 (15.9) 0.937 (23.8) 0.875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.437 (36.5) 1.875 (47.6) Table IV: Finish Finish Description Cadmium Plate/Olive Drab Hard Coat, Mil-A-8625 Color Gray Electroless Nickel Cadmium Plate/Olive Drab Over Nickel Plate Hard Coat, Mil-A-8625 Color Black Cad/O. D. Over Electroless Nickel (1000 Hour Salt Spray) Stainless Steel Material Passivate Per QQ-P-35 C 4. Glenair 600 series backshell assembly tools are recommended for assembly and installation. 5. Material/finish: Elbows, adapter, coupling & gland nuts, clamp - Al alloy or CRES/see Table II. Grip, hardware - CRES/passivate. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-5 E-Mail: [email protected] Geo-Marine® Accessories 297W-003 EMI/RFI Strain Relief Backshell Cable Sealing for Geo-Marine® Connectors ENVIRONMENTAL 45°, 90° AND STRAIGHT STRAIN RELIEF BACKSHELLS How To Order Sample Part Number Product Series and Connector Designator 297W S 003 16 10 D 6 297W Angular Function H = 45° J = 90° S = Straight Basic Number 003 Shell Size See Table I Cable Entry Dash No. See Table II Gland Nut D = Gland Nut Omit for Clamp, Substitute Dash Length 1/2 Inch Increments; E.G. 6 = 3 Inches See Note 2 Length “F Dim” for 90A in 1/2 Inch Increments Length “D Dim” for 45A in 1/2 Inch Increments Omit for Standard Length D & F on 45A and 90A Assembly H Typt Length see note 2 Length see note 2 J yp A Thread Typ Cable Range B Typ Syle II Knurl Style Mfr Option - Typ see note 3 Sym S - Straight 1.25 Max 1.25 Max G E see note 3 C see note 3 D see note 3 F see note 3 D Sym J - 45 ° Sym D - Gland Nut © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Sym J - 90° Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-6 E-Mail: [email protected] Geo-Marine® Accessories 297W-003 EMI/RFI Strain Relief Backshell Cable Sealing for Geo-Marine® Connectors Shell Size 10 12 14 16 18 20 22 24 A Thread Class 2B 5/8-24 UNEF 3/4-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 1/8-16 UN 1 1/4-16 UN 1 3/8-16 UN 1 1/2-16 UN B Max .781 (19.8) .906 (23.0) 1.031 (26.2) 1.156 (29.4) 1.281 (32.5) 1.406 (35.7) 1.531 (38.9) 1.656 (42.1) Table I: Dimensions C Max .688 (17.5) .705 (17.9) .732 (18.6) .748 (19.0) .773 (19.6) .800 (20.3) .823 (20.9) 1.041 (26.4) D (Standard) Max .86 (21.8) .89 (22.6) .91 (23.1) .92 (23.4) .94 (23.9) .98 (24.9) 1.01 (25.7) 1.18 (30.0) E Max .87 .97 .98 1.02 1.08 1.14 1.20 1.48 (22.1) (24.6) (24.9) (25.9) (27.4) (29.0) (30.5) (37.6) F (Standard) Max 1.04 (26.4) 1.11 (28.2) 1.17 (29.7) 1.19 (30.2) 1.25 (31.8) 1.33 (33.8) 1.40 (35.6) 1.64 (41.7) Table II: Cable Entry Dash Number Dimensions Cable Entry Dash No 03 04 06 08 10 12 16 20 24 28 32 40 Min .156 .188 .281 .344 .375 .438 .562 .750 .781 .969 1.125 1.469 G Max Max (4.0) (4.8) (7.1) (8.7) (9.5) (11.1) (14.3) (19.1) (19.8) (24.6) (28.6) (37.3) .250 .312 .4381 .5621 .6251 .750 .938 1.250 1.375 1.625 1.875 2.375 (6.4) (7.9) (11.1) (14.3) (15.9) (19.1) (23.8) (31.8) (34.9) (41.3) (47.6) (60.3) .844 .906 1.903 1.187 1.281 1.500 1.719 2.062 2.312 2.719 2.969 3.531 H Ref (21.4) (23.0) (48.3) (30.1) (32.5) (38.1) (43.7) (52.4) (58.7) (69.1) (75.4) (89.7) 1.03 1.03 1.03 1.03 1.19 1.19 1.19 1.19 1.19 1.19 1.19 1.19 J Ref (26.2) (26.2) (26.2) (26.2) (30.2) (30.2) (30.2) (30.2) (30.2) (30.2) (30.2) (30.2) .760 .760 .760 .760 .760 .760 1.073 1.323 1.323 1.572 1.572 1.572 (19.3) (19.3) (19.3) (19.3) (19.3) (19.3) (27.3) (33.6) (33.6) (39.9) (39.9) (39.9) Notes 1. Assembly identified with manufacturer’s name and P/N, space permitting. 2. Standard minimum length for Style I is 1.50 Inch, for Style II is 2.00 Inches. For shorter length, consult factory. Note: applies to Sym S, straight, only. 3. When maximum cable range exceeds inside diameter of connector shell: Sym S: Style II will be supplied. Sym H and Sym J: dimension C, D, E & F does not apply. 4. Glenair 600 series backshell assembly tools are recommended for assembly and installation. 5. Material/Finish: • Elbow, adapter, clamp, hardware, spring follower, coupling and gland nuts - CRES/pasivate • Washer - teflon/n.a. • Grommet, o-rings - silicone/n.a. © 2014 Glenair, Inc. Series 22 Geo-Marine® C U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-7 E-Mail: [email protected] Geo-Marine® Accessories 290-009 Metal Plug Protective Covers for Standard (Non-Scoop-Proof) Series 22 Connectors How To Order Plug Cover Sample Part Number 290-009 Series Shell Style 290-009 = Standard Plug Attachment Type See Table III Shell Size See Table I Dash No. See Table II or Table IV Attachment Length 5 = 5 inches S 18 03- 5 Notes: O-ring .06 1. Assembly identified with manufacturer’s name and P/N, space permitting. 2. Protective cover is capable of hydrostatic sealing pressures to 5000 PSI, when fully mated with counterpart plug. 3. Material/finish: Cover, hardware & split ring - 300 series stainless steel/passivate Wire rope - CRES, see Table III/passivate O-ring - nitrile/n.a. .820 Max A Di B Di C Thread Knurl Style Mfr Option Attachment Length ±.250 D Dia Table I: Dimensions Shell Size A Max B Max C Thread Class 2A 10 0.900 (22.9) 0.602 (15.3) .750 -.1P-.1L 12 1.025 (26.0) 0.727 (18.5) .875 -.1P-.1L 14 1.150 (29.2) 0.852 (21.6) 1.000 -.1P-.1L 16 1.275 (32.4) 0.977 (24.8) 1.125 -.1P-.1L 18 1.525 (38.7) 1.102 (28.0) 1.250 -.1P-.1L 20 1.650 (41.9) 1.227 (31.2) 1.375 -.1P-.1L 22 1.775 (45.1) 1.352 (34.3) 1.500 -.1P-.1L 24 1.900 (48.3) 1.477 (37.5) 1.625 -.1P-.1L * Reference piston o-ring P/N when purchasing replacement rings Sym B D C D E F Attachment Bead chain, brass, nickel plated, with terminal Link chain, brass, nickel plated, with clevis terminal Bead chain, CRES, passivated, with terminal Link chain, CRES, passivated, with clevis terminal Wire rope, nylon jacket w/terminal © 2014 Glenair, Inc. Table III: Attachment Type Sym Attachment Bead chain, CRES, G passivated, no terminal Wire rope, teflon jacket H w/ terminal Sym T K N Attachment omited S R Wire rope, pvc jacket w/terminal U Series 22 Geo-Marine® Piston O-Ring Size* 2-014 2-016 2-018 2-020 2-022 2-024 2-026 2-028 Attachment Wire rope, no jacket, w/terminal Nylon rope #8 Sash chain, CRES, passivate Wire rope, polyurethane jacket, with terminal U.S. CAGE Code 06324 Table II: Solid Ring Dia. Dash No D Dia 01 0.125 (31.8) 02 0.140 (3.6) 03 0.167 (4.2) 04 0.182 (4.6) 05 0.191 (4.9) 06 0.197 (5.0) Table IV: Split Ring Dia. Dash E Dash E No Dia No Dia 0.425 1.250 50 66 (10.8) (31.8) 0.485 1.350 52 68 (12.3) (34.3) 0.640 1.375 54 70 (16.3) (34.9) 0.750 1.485 56 72 (19.1) (37.7) 0.890 1.625 58 74 (22.6) (41.3) 1.015 1.750 60 76 (25.8) (44.5) 1.095 1.875 62 78 (27.8) (47.6) 1.130 1.980 64 80 (28.7) (50.3) 2.060 82 (52.3) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-8 E-Mail: [email protected] Geo-Marine® Accessories 290-010 Metal Receptacle Protective Covers for Standard (Non-Scoop-Proof) Series 22 Connectors How To Order Receptacle Cover Sample Part Number 290-010 Series Shell Style 290-010 = Scoop Proof Attachment Type See Table III Shell Size See Table I Dash No. See Table II or Table IV Attachment Length 5 = 5 inches S 18 03 -6 Notes: 1. Assembly identified with manufacturer’s name and P/N, space permitting. 2. Length tolerance for link chain (e) and sash chain (s) is ± one (1) link, for all other attachments ±.25. 3. Protective cover is capable of hydrostatic sealing pressures to 5000 PSI, when fully mated with counterpart plug. 4. Material/finish: Cover, hardware & split ring - 300 series stainless steel/passivate Attachment - see Table III/passivate O-ring - nitrile/n.a. .600 Max C Thread O-ring A Dia Attachment Length See note 2 Knurl Style Mfr Option D Dia Table I: Dimensions Shell Size A Max B Max C Thread Class 2B Piston O-Ring Size* 10 0.900 (22.9) 0.430 (10.9) .750 -.1P-.1L 2-014 12 1.025 (26.0) 0.555 (14.1) .875 -.1P-.1L 2-016 14 1.150 (29.2) 0.680 (17.3) 1.000 -.1P-.1L 2-018 16 1.275 (32.4) 0.805 (20.4) 1.125 -.1P-.1L 2-020 18 1.525 (38.7) 0.930 (23.6) 1.250 -.1P-.1L 2-022 20 1.650 (41.9) 1.055 (26.8) 1.375 -.1P-.1L 2-024 22 1.775 (45.1) 1.180 (30.0) 1.500 -.1P-.1L 2-026 24 1.900 (48.3) 1.305 (33.1) 1.625 -.1P-.1L 2-028 * Reference piston o-ring P/N when purchasing replacement rings Sym B C D E F Attachment Bead chain, brass, nickel plated, with terminal Link chain, brass, nickel plated, with clevis terminal Bead chain, CRES, passivated, with terminal Link chain, CRES, passivated, with clevis terminal Wire rope, nylon jacket w/terminal © 2014 Glenair, Inc. Table III: Attachment Type Sym Attachment Bead chain, CRES, G passivated, no terminal Wire rope, teflon jacket H w/ terminal Sym T K N Attachment omited S R Wire rope, pvc jacket w/terminal U Series 22 Geo-Marine® Table II: Solid Ring Dia. Dash No D Dia 01 0.125 (3.2) 02 0.140 (3.6) 03 0.167 (4.2) 04 0.182 (4.6) 05 0.191 (4.9) 06 0.197 (5.0) 10 0.266 (6.8) Attachment Wire rope, no jacket, w/terminal Nylon rope #8 Sash chain, CRES, passivate Wire rope, polyurethane jacket, with terminal U.S. CAGE Code 06324 Table IV: Split Ring Dia. Dash E Dash E No Dia No Dia 0.425 1.485 50 72 (10.8) (37.7) 0.485 1.625 52 74 (12.3) (41.3) 0.640 1.750 54 76 (16.3) (44.5) 0.750 1.875 56 78 (19.1) (47.6) 0.890 1.980 58 80 (22.6) (50.3) 1.015 2.060 60 82 (25.8) (52.3) 1.095 2.235 62 84 (27.8) (56.8) 2.310 64 1.130 86 (58.7) 1.250 2.475 66 88 (31.8) (62.9) 1.350 2.655 68 90 (34.3) (67.4) 1.375 2.810 70 92 (34.9) (71.4) 3.045 94 (77.3) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-9 E-Mail: [email protected] C Geo-Marine® Accessories 290-016 Metal Plug Protective Covers for Scoop-Proof Series 22 Connectors METAL SHELL SCOOP-PROOF PLUG COVER How To Order Receptacle Cover Sample Part Number 290-016 S Series Shell Style 290-016 = Scoop Proof Attachment Type See Table III Shell Size See Table I Dash No. See Table II, IV, V or VI, omit for Type SK Attachment Length In Inches; ± .25 for Rope, ± Link for Chain 18 03- 6 Notes: 1. Assembly identified with manufacturer’s name and P/N, space permitting. 2. Max. diameter mandrel over which assembled ring will rotate freely. 3. If retaining ring is desired, use Tables IV & V (solid) or Table VI (split ring). 4. For terminal lug or type “WS”, use Table II. 5. Material/finish: Cover, attachment, clevis, hardware - CRES/passivate O-ring - nitrile/n.a. 1.13 Max B Length A Thread Knurl Style Mfr Option C Dia D E Style A D Style B F (Ref) See Note 2 Style C Slip Knot Type WS © 2014 Glenair, Inc. Type Sk Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-10 E-Mail: [email protected] Geo-Marine® Accessories 290-016 Metal Plug Protective Covers for Scoop-Proof Series 22 Connectors Dash No 10 12 14 16 18 20 22 24 Table I: Dimensions A Thread B Class 2A Max 0.750 -.1P-.1L 0.900 (22.9) 0.875 -.1P-.1L 1.025 (26.0) 1.000 -.1P-.1L 1.150 (29.2) 1.125 -.1P-.1L 1.275 (32.4) 1.250 -.1P-.1L 1.525 (38.7) 1.375 -.1P-.1L 1.650 (41.9) 1.500 -.1P-.1L 1.775 (45.1) 1.625 -.1P-.1L 1.900 (48.3) Table IV: Style A Solid Ring Dimensions Dash D Dia No ±.015 095 0.312 (7.9) 100 0.391 (9.9) 101 0.516 (13.1) 102 0.583 (14.8) 103 0.641 (16.3) 104 0.708 (18.0) 105 0.766 (19.5) 205 0.788 (20.0) 106 0.896 (22.8) 206 0.907 (23.0) 107 1.016 (25.8) 207 1.025 (26.0) 108 1.141 (29.0) 308 1.188 (30.2) 208 1.203 (30.6) 109 1.266 (32.2) 209 1.312 (33.3) 110 1.391 (35.3) 210 1.438 (36.5) 111 1.521 (38.6) 211 1.536 (39.0) 112 1.641 (41.7) 113 1.766 (44.9) 213 1.812 (46.0) 114 1.891 (48.0) 214 1.938 (49.2) 115 2.078 (52.8) 116 2.406 (61.1) 117 2.510 (63.8) © 2014 Glenair, Inc. Table II: Split Ring Dimensions Dash No. C Dia. 01 0.125 (3.2) 02 0.140 (3.6) 03 0.167 (4.2) 04 0.182 (4.6) 05 0.191 (4.9) 06 0.197 (5.0) WS With Strap Table V: Style B Solid Ring Dimensions Dash E Dia No ±.015 08 0.468 (11.9) 10 0.593 (15.1) 12 0.718 )(18.2) 13 0.765 (19.4) 14 0.844 (21.4) 15 0.890 (22.6) 16 0.968 (24.6) 17 1.015 (25.8) 18 1.093 (27.8) 19 1.140 (29.0) 20 1.203 (30.6) 21 1.265 (32.1) 22 1.343 (34.1) 23 1.453 (36.9) 24 1.484 (37.7) 25 1.577 (40.1) 27 1.640 (41.7) 28 1.687 (42.8) 29 1.765 (44.8) 30 1.890 (48.0) 31 1.953 (49.6) 32 1.968 (50.0) 33 2.077 (52.8) 35 2.140 (54.4) 36 2.187 (55.5) 40 2.406 (61.1) 44 2.656 (67.5) 48 3.031 (77.0) Table Vi: Style C Ring Dimensions Dash No F Dia 50 0.425 (10.8) 52 0.485 (12.3) 54 0.640 (16.3) 56 0.750 (19.1) 58 0.890 (22.6) 60 1.015 (25.8) 62 1.095 (27.8) 64 1.130 (28.7) 66 1.250 (31.8) 68 1.350 (34.3) 70 1.375 (34.9) 72 1.485 (37.7) 74 1.625 (41.3) 76 1.750 (44.5) 78 1.875 (47.6) 80 1.980 (50.3) 82 2.060 (52.3) 84 2.235 (56.8) 86 2.310 (58.7) 88 2.475 (62.9) 90 2.655 (67.4) 92 2.810 (71.4) 94 3.045 (77.3) Series 22 Geo-Marine® Table III: Attachment Type Attachment Bead chain, brass, nickel plated, B with terminal Link chain, brass, nickel plated, C with clevis terminal Bead chain, CRES, passivated, D with terminal Link chain, CRES, passivated, E with clevis terminal Wire rope, nylon jacket w/ F terminal Wire rope, teflon jacket w/ H terminal K Nylon rope N Attachment omitted R Wire rope, PVC jacket w/terminal T Wire rope, no jacket, w/terminal S #8 Sash chain, CRES, passivated Nylon rope, (black) with slip SK knot Wire rope, polyurethane jacket U with terminal Sym U.S. CAGE Code 06324 C Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-11 E-Mail: [email protected] Geo-Marine® Accessories Custom Overmolded Geo-Marine® Cable Assemblies All Series 22 connectors can be supplied complete with molded cable terminations or open wire bundles to meet specific application requirements. Custom Overmolded Cable Assemblies, built in our tightly controlled, 100% inspection and test faciliites, are a turnkey solution to the complex requirements of harsh environment interconnect systems. Glenair offers users of Series 22 Geo-Marine® connectors a complete custom cabling service, designing and producing cable assemblies or harnesses to meet the user’s specific application requirements. Glenair has over 30 years experience and expertise in designing and producing cable assemblies to meet many unique environmental conditions, supported by test facilities to provide the user with proven reliability and performance. CABLE RECEPTACLE WITH MOLDED CABLE Potting Compound CABLE PLUG WITH MOLDED CABLE Molded connector-to-cable terminations are the common application for Series 22 connectors, with materials and compounds available to satisfy the most stringent application. Typical molding and cable jacketing materials include: BULKHEAD RECEPTACLE WITH PIGTAILS •Neoprene •Polyurethane •Viton Conductor insulation on wire is selected for compatability with the molding and jacket materials for optimum performance and cost-effectiveness. D Additional custom features include items such as EMI shielding, Kevlar stress members, multiple breakouts, as well as open wire bundles or "pigtails" which are terminated with a nonhydroscopic potting compound. Special molded shapes are available to accommodate unusual space limitations or cable routing. Contact Glenair's ABC Division for further information on complete cable assemblies using the Series 22 GeoMarine®connectors. © 2014 Glenair, Inc. Series 22 Geo-Marine® Depicted here is a typical cable assembly designed to withstand pressure to 5000 PSI. Glenair's standard molding material is solvent and oil resistant neoprene per MIL-S-6855 molded to neoprene jacketed cable containing either rubber or Teflon insulated, fine stranded, copper conductors. Special molded shapes and cable configurations are available per customer requirements. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-12 E-Mail: [email protected] Geo-Marine® Accessories Custom Overmolded Geo-Marine® Cable Assemblies Application Worksheet Glenair specializes in the manufacture of fast-turnaround cable assemblies, and our ability to rapidly respond to requests for our unique, overmolded Geo-Marine® Cables is well known throughout the industry. For a fast quote on your next point-to-point cable, just photocopy this page and fax or mail the completed form to your local Glenair representative, or directly to the Glenair factory. For multi-branch cables, or more complex assemblies, please call the factory to speak directly with an application engineer, or submit your drawing via fax or E-mail. Originator Contact Information Contact Name and Title______________________________________________________________________________________________________ Company Name/Division_____________________________________________________________________________________________________ Street Address______________________________________________________________________________________________________________ City and State/Province______________________________________________________________________________________________________ Country and Postal Code/Zip__________________________________________________________________________________________________ Telephone___________________________ Fax_________________________________________Email______________________________________ Name of Project or Program_______________________________________Description___________________________________________________ Initial Quantity______________________ Required Delivery Date_____________________ Potential Long-Term Quantity__________________ B A Length: Wire Gauge:12 16 20 22Kevlar Strength Members: Overmolding Material Type: Neoprene Yes No Viton Polyurethane Tin/Copper EMI Shielding: None Single Overall Shield Double OverallOther: Consult Factory Connector B: Connector B: Gender: Pin Socket Type: 06 16 01 11 Class: Environmental Hermetic Polarization: N 1 2 3 4 Gender: Pin Socket Type: 06 16 01 11 Class: Environmental Hermetic Polarization: N 1 2 3 4 Shell Size and Insert Arrangements: _______-_______ (See Section A) Shell Size and Insert Arrangements: _______-_______ (See Section A) Cable Exit Angle: Cable Exit Angle: Dust Cover: Straight 45° 90° Yes Dust Cover: No Marking Instructions:_________________________ © 2014 Glenair, Inc. Straight 45° 90° Yes No Marking Instructions:_________________________ Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com C-13 E-Mail: [email protected] C SERIES 22 Geo-Marine® UNIQUE APPLICATION CONNECTORS Special flange designs and custom configurations G lenair has provided solutions to the toughest environmental interconnect challenges for decades. Put Glenair’s experience to work for you—our engineers are ready to design high-pressure, harsh-environment interconnect components to fit even the most challenging and unusual applications. From space-saving special flange designs to unique coupling-nut configurations, these pages demonstrate some of Glenair’s design capabilities. Glenair, Inc. 1211 Air Way Glendale, CA 91201-2497 818-247-6000 [email protected] www.glenair.com Geo-Marine® Custom Applications Geo-Marine® Special Purpose, Custom Application Connector Capabilities Red Band Visible When Mated Quick Selection Guide © 2014 Glenair, Inc. High-Pressure Environmental Plug with Quick Disconnect Lanyard 227-015 D-2 High-Pressure Environmental Cable Plug with Wire Mesh Cable Grip 227-158 D-3 High-Pressure Environmental In-Line Gender Changer 227-152 D-5 High-Pressure Environmental Square Flange Wall-Mount Gender Changer 940-016 D-6 High-Pressure Environmental Sav-Con® Connector Saver (Non Scoop-Proof) 940-014 D-8 High-Pressure Environmental Jam Nut Mount Sav-Con® Connector Saver 940-015 D-9 High-Pressure Environmental Sav-Con® Connector Saver (Scoop-Proof) 940-025 D-10 Hermetic Receptacle With Triangular Flange Mount 227-162H D-12 High-Pressure Environmental Box Mount Plug with Circular Flange 227-163 D-13 Stainless Steel Harsh Environment Connector Receptacle Assembly 257-003 D-15 Stainless Steel Harsh Environment Receptacle Assembly with PCB Contacts 257-005 D-18 Stainless Steel Harsh Environment Connector Receptacle Assembly 257-007 D-19 Stainless Steel Harsh Environment Connector Receptacle Assembly 257-012 D-22 Flange Mount and Weld Mount Stainless Steel Connector Receptacle Assemblies 257-163 and 257-164 D-23 Stainless Steel Plug and Receptacle Assemblies 257-165 and 257-166 D-25 10KPSI Series Underwater Interconnect Assemblies D-27 Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-1 E-Mail: [email protected] D Geo-Marine® Custom Applications 227-015 High-Pressure Environmental Plug with Quick-Disconnect Lanyard How To Order Sample Part Number MATES WITH SERIES 22 227-015 -24 Series No. 227-015 Shell Size -24 Insert Arrangement 128 (See Note 3) Contact Style P = Pin, S = Socket Alternate Key Position N, 1, 2, 3 or 4 Lanyard Length In Inches; e.g. 6 = 6 inches -128 P N 6 2.70 Max Table I: Dimensions 2.00 Max A Thread ØB Max Red Band Visible When Mated NAS 1281C7 (see Note 7) .062 Approx Medium Raised Knurl-typ Insert Arrangement with Pin Or Socket Contacts (see Note 2) Lanyard Length .25± Thimble 1.95 Max Shell Size A Thread B Dia 10 12 14 16 .750-.1P-.1L .875-.1P-.1L 1.000-.1P-.1L 1.125-.1P-.1L 1.000 (25.40) 1.125 (28.58) 1.250 (31.75) 1.375 (34.93) 18 20 22 24 1.250-.1P-.1L 1.375-.1P-.1L 1.500-.1P-.1L 1.625-.1P-.1L 1.594 (40.49) 1.719 (43.66) 1.894 (48.11) 1.969 (50.01) Notes: 1.Assembly identified with manufactures name and P/N, space permitting. 2.227-015 Connector is designed to mate with Glenair 220 series connector receptacles. 3.For available insert arrangement, see Glenair Geo-Marine®catalog or consult factory. 4.Performance capabilities: Current rating: see Glenair Geo-Marine®catalog. 5.For cable or wire assemblies, consult factory. 6.Material/finish: Coupling nut, adapter, barrel, lanyard ferrule, bushing, ring, coil spring, lanyard - stainless/passivate. Contacts - copper alloy/gold plate Inner sleeve - nickel aluminum bronze/degreased Insulator - high grade rigid dielectric/N.A. Retaining springs - phos. bronze/n.a. Thimble - per NAS AN100C3 Hook - per NAS 1281C7 O-ring - nitrile/N .A. Flat seal - fluorosilicone/N.A. 7.Snap hook will accept a diameter of .19 and is included in the open position D © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-2 E-Mail: [email protected] Geo-Marine® Custom Applications 227-158 High-Pressure Environmental Cable Plug with Wire Mesh Cable Grip How To Order Sample Part Number 227-158 24 -61 S N Basic No. 227-158 Shell Size See Table II Insert Arrangement Dash No. See Table I Contact Style P = Pin, S = Socket Alternate Key Positiom N, 1, 2, 3 or 4 Cable Grip Designator Supplied with wire mesh cable grip. Omit for None Cable Entry Dash Number 03, 04, 06, 08, 10, 12, 14, 16 See Table III -CG 12 C -Typ Length Max Cable Grip (Ø B) Cable Range Typ Knurl Style Mfr Option - Typ Style I (Ø B) Knurl Style Mfr Option - Typ Notes: 1.Assembly identified with manufacturer's name and P/N, space permitting. 2.Performance capabilities: Current rating: • Size 12 contact - Environmental: 23 amps • Size 16 contact - Environmental: 13 amps • Size 20 contact - Environmental: 7.5 amps • Size 22 contact - Environmental: 5 amps Hydrostatic pressure rating: 5000 PSI, fully mated. Insulation resistance: 1000 megaohms min at 500 VDC © 2014 Glenair, Inc. D Hex Flats Typ Style II Note: electrical safety limits to be set by user. Peak voltages, switching surges, transients, etc., should be used to determine safe applications. 3.Material/finish: Barrel - 316L stainless steel/passivate Contacts - copper alloy/gold plate Coupling nut - nickel-aluminum-bronze/degrease Hardware - 300 series stainless steel/passivate Insulator - high grade rigid dielectric/n.a. Seals - fluorosilicone Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-3 E-Mail: [email protected] D Geo-Marine® Custom Applications 227-158 High-Pressure Environmental Cable Plug with Wire Mesh Cable Grip Table I: Insert Arrangements Shell Size 10 12 14 16 18 20 22 24 Insert Arrangement Dash No -2 -4 -6 -13 -8 -10 -22 -8A -12 -19 --37 -19 -26 -55 -11 -22 -32 -66 30 -41 -79 -38 -50 -55 -85 -24 -48 -61 -100 1.19 Max Table II: Dimensions Contact Size and Quantity 22 20 16 6 2 4 10 8 19 12 26 19 Shell Size 08 10 12 14 16 18 20 22 24 12 13 22 4 4 Dash No C Ref 03 04 06 08 10 12 14 16 2.12 2.75 4.00 4.12 4.37 6.00 5.00 6.00 55 11 22 41 30 B Dia Max .875 1.000 1.125 1.250 1.375 1.594 1.719 1.894 1.969 Max (Style 1) Dash Numbers 03 04 08 10 12 12 14 16 16 Length Max 3.00 3.00 3.00 3.00 3.00 3.50 3.50 3.50 3.50 Table III: Cable Entry Dash Number 37 32 A Thread Class 2A 1/2-28 UNEF 5/8-24UNEF 3/4-20UNEF 7/8-20UNEF 1 -20UNEF 1 1/8-16UN 1 1/4-16UN 1 3/8-16UN 1 1/2-16UN 66 79 Cable Range Min Max .180 .210 .210 .312 .310 .438 .438 .500 .500 .625 .530 .750 .750 .875 .875 1.000 D Flats .75 1.00 1.00 1.00 1.12 1.50 1.75 38 48 55 2 85 16 48 61 16 100 Anti-decoupling Device Polarizing Keyways Quick Coupling Thread For Insert Arrangement, See Table I & P/N Development ØB D Knurl Style Mfr Option A Thread (Modified Major) © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-4 E-Mail: [email protected] Geo-Marine® Custom Applications 227-152 High-Pressure Environmental In-Line Gender Changer Table I: Insert Arrangements How To Order Sample Part Number Series No. 227-152 Z1 16 -19 N 227 -152 Finish Sym Z1 Shell Size 10, 12, 14, 16, 18, 20, 22, 24 Insert Arrangement See Table I Alternate Key Position N, 1, 2, 3 or 4 - 4 - 6 - 13 - 8 - 10 - 22 - 12 - 19 - 37 - 19 - 26 - 55 - 22 - 32 - 66 - 30 - 38 - 41 - 79 - 38 - 55 - 85 - 48 - 61 -100 10 12 Table II: Dimensions Shell Size 10 12 14 16 18 20 22 24 A Thread .750-.1P-.1L .875-.1P-.1L 1.000-.1P-.1L 1.125-.1P-.1L 1.250-.1P-.1L 1.375-.1P-.1L 1.500-.1P-.1L 1.625-.1P-.1L B Dia .906 1.031 1.156 1.281 1.531 1.656 1.781 1.906 14 16 18 20 Notes: 1.Assembly identified with manufacturer's name and P/N, space permitting. 2.Glenair 227-152 connector receptacle is designed to mate with Glenair 220-16 series Geo-Marine®connectors. (scoop-proof ) 3.Material/Finish: Shell, lock nut - CRES/passivate. Contacts - copper alloy/gold plate. Insulators - high grade rigid dielectric/n.a. Interface seal - fluorosilicone/n.a. O-rings - nitrile/n.a. Contact Size and Quantity Insert Arrangement Dash No. Shell Size 22 24 22 20 16 4 6 13 8 10 22 12 19 37 19 26 55 22 32 66 30 8 30 41 79 38 55 85 48 61 100 MATES WITH 220-16 Master Key Indicator 2.100 Max O-ring A Thread Class 2a Both Sides ØB Max D Red Color Band For Visual Indication Of Full Mate Typ. © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-5 E-Mail: [email protected] Geo-Marine® Custom Applications 940-016 High-Pressure Environmental Square Flange Wall-Mount Gender Changer How To Order Sample Part Number 940-016 M 24 -61 S Series No. 940 -016 Finish Symbol B, J, M, N, NF, T, Z1 See Table III Shell Size 10, 12, 14, 16, 18, 20, 22, 24 See Table II Insert Arrangement See Table I Contact Style P = Pins, Panel SideS = Sockets Panel Side PP = Pin to Pin Config.SS = Socket to Socket Config. Alternate Key Position N, 1, 2, 3 or 4 N Notes 1.Assembly identified with manufacturer's name and P/N, space permitting. 2.Glenair 940-016 connector saver is designed to mate with Glenair 22 - series GeoMarine®connectors. 3.Material/Finish: Barrel, shell, coupling & jam nut - see Table II. Contacts - copper alloy/gold plate. Insulators - high grade rigid dielectric/n.a. O-ring & seals - silicone/n.a. MATES WITH SERIES 22 1.58(40.1) Max D Dia Typ O-ring O-ring Typ B Typ D A Thread Class 2A Typ Red Color Band For Visual Indication Of Full Mate - Typ C SQ © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 .156(4.0) Max .50(12.7) Max Panel Accommodation Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-6 E-Mail: [email protected] Geo-Marine® Custom Applications 940-016 High-Pressure Environmental Square Flange Wall-Mount Gender Changer Table I: Contact Arrangements Shell Size 10 12 14 16 18 20 22 24 Insert Arrangement Dash No -2 -4 -6 -13 -8 -10 -22 -12 -19 --37 -19 -26 -55 -11 -22 -32 -66 30 -41 -79 -38 -50 -55 -85 -24 -48 -61 -100 Table II: Dimensions Contact Size and Quantity 22 20 16 6 2 4 10 8 19 12 26 19 12 13 22 Shell Size 10 12 14 16 18 20 22 24 A Thread .750-.1P-.1L .875-.1P-.1L 1.000-.1P-.1L 1.125-.1P-.1L 1.250-.1P-.1L 1.375-.1P-.1L 1.500-.1P-.1L 1.625-.1P-.1L B Dim .938(23.8) 1.062(27.0) 1.188(30.2) 1.250(31.8) 1.375(34.9) 1.500(38.1) 1.625(41.3) 1.750(44.5) C Dim 1.188(30.2) 1.312(33.3) 1.438(36.5) 1.562(39.7) 1.750(44.5) 1.875(47.6) 2.000(50.8) 2.125(54.0) D .125(3.2) .125(3.2) .125(3.2) .125(3.2) .125(3.2) .125(3.2) .125(3.2) .156(4.0) E .890(22.6) 1.015(25.8) 1.140(29.0) 1.265(32.1) 1.390(32.5) 1.515(38.5) 1.640(41.7) 1.765(44.8) 37 Table III: Material and Finish 55 32 11 22 41 30 66 79 38 48 55 2 SYM B J M N NF T Z1 Finish Description Cadmium plate/olive drab Gold iridite over cadmium plate over nickel Electroless nickel Cadmium plate/olive drab over nickel CAD/O. D. over electroless nickel (500 hour salt spray) Cadmium plate/bright dip over nickel Stainless steel, passivated 85 61 16 48 16 100 B TYP E Dia Panel Cut Out D © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-7 E-Mail: [email protected] Geo-Marine® Custom Applications 940-014 High-Pressure Environemental Sav-Con® Connector Saver (Non Scoop-Proof) Notes How To Order Sample Part Number 940 -014 M -61 Series No. 940 Basic No. 014 Finish Symbol B, J, M, N, NF, T, Z1 See Table II Shell Size 10, 12, 14, 16, 18, 20, 22, 24 See Table III Insert Arrangement See Table I Contact Style P = Pins, Plug Side S = Sockets, Plug Side Alternate Key Position N, 1, 2, 3 or 4 MATES WITH Table I: Insert Arrangements Shell Size 10 12 14 16 18 20 D 24 22 24 Insert Arrangement Dash No -2 -4 -6 -13 -8 -10 -22 -12 -19 --37 -19 -26 -55 -11 -22 -32 -66 30 -41 -79 -38 -50 -55 -85 -24 -48 -61 -100 © 2014 Glenair, Inc. Contact Size and Quantity 22 20 16 6 2 4 10 8 19 12 S 1.Assembly identified with manufacturer's name and P/N, space permitting. 2.Glenair 940-014 connector saver is designed to mate with Glenair 220-06 series GeoMarine®connectors. (Non-scoop-proof ) 3.Material/finish: Barrel, shell, coupling nuts - see Table II. Contacts - copper alloy/gold plate. Insulators - high grade rigid dielectric/N.A. O-ring & seals - silicone/N.A. N 1.75(44.45) Max O-ring A Thread Class 2b 220-006 Compression Seal other end - any geomarine non scoop proof recpt 12 B 13 22 A Thread Class 2a 37 26 19 32 11 22 Knurl Style Mfr Option - Typ Red Color Band For Visual Indication Of Full Mate. 55 Table II: Dimensions 66 41 30 79 38 48 55 2 85 61 100 16 48 16 Shell Size 10 12 14 16 18 20 22 24 A Thread Table III: Material/Finish B Dia .750-.1P-.1L 1.000 (25.40) .875-.1P-.1L 1.125 (28.58) 1.000-.1P-.1L 1.250 (31.75) 1.125-.1P-.1L 1.375 (34.93) 1.250-.1P-.1L 1.594 (40.49) 1.375-.1P-.1L 1.719 (43.66) 1.500-.1P-.1L 1.894 (48.11) 1.625-.1P-.1L 1.969 (50.01) Series 22 Geo-Marine® Sym Finish Description B Aluminum/Cadmium Plate/Olive Drab Aluminum/Gold Iridite Over Cadmium Plate Over J Nickel M Aluminum/Electroless Nickel N Aluminum/Cadmium Plate/Olive Drab Over Nickel Aluminum/Cad/O. D. Over Electroless Nickel NF (500 Hour Salt Spray) T Aluminum/Cadmium Plate/Bright Dip Over Nickel Stainless Steel/Passivate Coupling Nut Nickel Z1 Aluminum - Bronze/Degrease U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-8 E-Mail: [email protected] Geo-Marine® Custom Applications 940-015 High-Pressure Environemental Jam Nut Mount Sav-Con® Connector Saver How To Order Table I: Insert Arrangements Insert Arrangement Dash No Shell Size -2 -4 -6 -13 -8 -10 -22 -12 -19 --37 -19 -26 -55 -11 -22 -32 -66 30 -41 -79 -38 -50 -55 -85 -24 -48 -61 -100 10 12 14 16 18 20 22 24 Contact Size and Quantity 22 Sample Part Number 940-015 Series No. 940-015 2 4 Finish Symbol B, J, M, N, NF, T, Z1 See Table III Shell Size 10, 12, 14, 16, 18, 20, 22, 24 See Table II 8 Insert Arrangement See Table I Contact Style P = Pin, S = Socket Alternate Key Position N, 1, 2, 3 or 4 20 16 6 10 12 13 22 19 12 26 19 32 11 22 41 30 37 79 N A Thread Class 2B 2 O-ring 85 Compression Seal O-ring 61 S 2.62 (66.55) Max 38 16 48 -61 1.Assembly identified with manufacturer's name and P/N, space permitting. 2.Glenair 940-014 connector saver is designed to mate with Glenair Series 22 Geo-Marine®connectors. 3.Material/finish: Barrel, shell, coupling & jam nut - Al alloy/see Table III. Contacts - copper alloy/gold plate. Insulators - high grade rigid dielectric/n.a. O-ring & seals - silicone/n.a. 66 55 24 Notes 55 48 M 16 100 MATES WITH SERIES 22 B Knurl Style Mfr Option - Typ A Thread Class 2A Red Color Band For Visual Indication Of Full Mate Hole For .032 Dia Safety Wire, 3 Equally Spaced .16 (4.06) D C .156 (3.96) Max .50 Max. Panel Accommodation E Dia. Table II: Dimensions Recommended Shell Size A Thread PanelBCut Dia Out 10 .750-.1P-.1L 1.000 (25.40) 12 .875-.1P-.1L 1.125 (28.58) 14 1.000-.1P-.1L 1.250 (31.75) 16 1.125-.1P-.1L 1.375 (34.93) 18 1.250-.1P-.1L 1.594 (40.49) 20 1.375-.1P-.1L 1.719 (43.66) 22 1.500-.1P-.1L 1.894 (48.11) 24 1.625-.1P-.1L 1.969 (50.01) C Dia 1.25 (31.75) 1.38 (35.05) 1.50 (38.10) 1.63 (41.40) 1.75 (44.45) 1.88 (47.75) 2.00 (50.80) 2.12 (53.85) Table III: Finishes D .835 (21.21) .960 (24.38) 1.085 (27.56) 1.210 (30.73) 1.335 (33.91) 1.460 (37.08) 1.585 (40.26) 1.710(43.43) E .885 (22.48) 1.010 (27.94) 1.135 (28.83) 1.260 (32.00) 1.385 (35.18) 1.510 (38.35) 1.635 (41.53) 1.760(44.70) Sym B J M N NF T © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Finish Description Cadmium Plate/Olive Drab Gold Iridite Over Cadmium Plate Over Nickel Electroless Nickel Cadmium Plate/Olive Drab Over Nickel Cad/O. D. Over Electroless Nickel (500 Hour Salt Spray) Cadmium Plate/Bright Dip Over Nickel Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-9 E-Mail: [email protected] D Geo-Marine® Custom Applications 940-025 High-Pressure Environmental Sav-Con® Connector Saver (Scoop-Proof) How To Order Sample Part Number 940 -025 M 16 -26 Series No. 940 Basic No. -025 Finish Symbol B, J, M, N, NF, T, Z1 See Table II Shell Size 10, 12, 14, 16, 18, 20, 22, 24 See Table I Insert Arrangement See Table I Contact Style P = Pins, Panel Side S = Sockets Panel Side Alternate Key Position N, 1, 2, 3 or 4 S N Notes: 1.Assembly identified with manufacturer's name and P/N, space permitting. 2.Glenair 940-025 connector saver is designed to mate with Glenair 220-16 series Geo-Marine®connectors. (Scoop-Proof ) 3.Material/Finish: Barrel, shell, coupling nuts - see Table II. Contacts - copper alloy/gold plate. Insulators - high grade rigid dielectric/n.a. O-ring & seals - silicone/n.a. COMPRESSION SEAL 2.50 (63.5) MAX MATES WITH O-RING A THREAD CLASS 2B MASTER KEY INDICATOR 220-16 B D A THREAD CLASS 2A © 2014 Glenair, Inc. Series 22 Geo-Marine® KNURL STYLE MFR OPTION - TYP RED COLOR BAND FOR VISUAL . MATE INDICATION OF FULL U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-10 E-Mail: [email protected] Geo-Marine® Custom Applications 940-025 High-Pressure Environmental Sav-Con® Connector Saver (Scoop-Proof) Table I: Insert Arrangements Insert Arrangement Dash No Shell Size -2 -4 -6 -13 -8 -10 -22 -12 -19 --37 -19 -26 -55 -11 -22 -32 -66 30 -41 -79 -38 -50 -55 -85 -24 -48 -61 -100 10 12 14 16 18 20 22 24 Contact Size and Quantity 22 10 12 14 16 18 20 22 24 A Thread .750-.1P-.1L .875-.1P-.1L 1.000-.1P-.1L 1.125-.1P-.1L 1.250-.1P-.1L 1.375-.1P-.1L 1.500-.1P-.1L 1.625-.1P-.1L © 2014 Glenair, Inc. B Dia 1.000 (25.40) 1.125 (28.58) 1.250 (31.75) 1.375 (34.93) 1.594 (40.49) 1.719 (43.66) 1.894 (48.11) 1.969 (50.01) 16 6 2 4 10 8 19 12 26 19 32 11 22 41 30 12 13 22 37 55 66 79 38 48 55 2 85 61 16 48 16 100 Table III: Material/Finish Table II: Dimensions Shell Size 20 SYM Finish Description B J M N Aluminum/Cadmium Plate/Olive Drab Aluminum/Gold Iridite Over Cadmium Plate Over Nickel Aluminum/Electroless Nickel Aluminum/Cadmium Plate/Olive Drab Over Nickel Aluminum/Cad/O. D. Over Electroless Nickel (500 Hour Salt Spray) Aluminum/Cadmium Plate/Bright Dip Over Nickel Stainless Steel/Passivate Coupling Nut Nickel - Aluminum Bronze/Degrease NF T Z1 Series 22 Geo-Marine® U.S. CAGE Code 06324 D Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-11 E-Mail: [email protected] Geo-Marine® Custom Applications 227-162H Hermetic Receptacle with Triangular Flange Mount RECEPTACLE CONNECTOR WITH SPECIAL TRIANGULAR FLANGE How To Order MATES WITH See note 2 .240 Sample Part Number 227166 Series Shell Style 227-162H Shell size 24 Insert Arrangement Dash No. -100 Contact Syle P = Pin Polarization N, 1, 2, 3 or 4 3.040 (77.22) P N ø 3.120 (79.25) See note 1 .03 X 15° 1.181 (30.0) .276 (7.0) See note 1 ø 3.740 (95) See note 4 1.750-.1P-.1L 2A QUICK COUPLING THREAD FULL-MATE INDICATOR Notes ø .335 (8.5) See note 4 1.Clearance for 1 inch hex socket wrench. 2.Prepot with epoxy. 3.Mates with glenair 227-166 plug connector. 4.Dimensions per V0GEE0017A, Rev. B. 5.Assembly to be identified with manufacturer's name, part number and date code. 6.Performance capabilities: Current rating: • 4 power contacts - 2.0 Amps @ 660 vac, continuous • 96 Signal contacts- 1.5 Amps @ 200VDC max., continuous DWV and IR: • DWV- 1500 vac between pin to pin and pins to shell. • Insulation resistance- 100 megohms min @ 1000/250VDC pin to pin and pins to shell Pressure and hermeticity: © 2014 Glenair, Inc. -100 MASTER KEY INDICATOR (ROTATES W/ KEY FOR ALTERNATE POSITIONS) ø1.748 1.747 D 24 .595 .590 .30 TYP 2-030 O-RING 227-162H • Hydrostatic pressure rating: - 5800 PSI, open face, in both directions. • hermeticity - 1x10-6 ccHe/sec @ 1 atm. diff. NOTE: electrical safety limits to be set by user. Peak voltages, switching surges, transients, etc. Should be used to determine safe application of product. Glenair is not liable if the voltage and current exceed the limit set forth. 7.Material/finish: • Shell- 316L/passivate • Contacts- 52 ni alloy/gold plated • Insulator- full glass with epoxy backfill/n.a. • Interfacial and o-ring seals- nitrile/n.a. NOTE: unless otherwise stated Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-12 E-Mail: [email protected] Geo-Marine® Custom Applications 227-163 High-Pressure Environmental Box Mount Plug with Circular Flange PLUG CONNECTOR WITH SPECIAL CIRCULAR FLANGE How To Order Sample Part Number 227-163 24 Series Shell Style 227-163 Shell size 10,12, 14, 16, 18, 20, 22, 24 See Table II Insert Arrangement Dash No. See Table I Contact Syle P = Pin, S = Socket Polarization N, 1, 2, 3 or 4 Polarization Keyways -61 S N Ø.219 (5.6) 6 X 60° Typ See Note 1 C Dia Bolt Circle Quick Coupling Thread Anti-decoupling Device 1.25 Max Table I: Contact Arrangements Shell Size 10 12 14 16 18 20 22 24 Insert Arrangement Dash No. - 4 - 6 - 13 - 8 - 10 - 22 - 12 - 19 - 37 - 19 - 26 - 55 - 22 - 32 - 66 - 30 - 38 - 41 - 79 - 38 - 55 - 85 - 48 - 61 -100 © 2014 Glenair, Inc. Contact Size and Quantity 22 20 O-rings A 16 4 6 13 B 8 10 22 12 19 37 19 26 Knurl Style Mfr Option FOR INSERT ARRANGEMENT, SEE TABLE I & PART NUMBER DEVELOPMENT Table II: Dimensions Shell Size 10 12 14 16 A Dia Max B Dim C Dim 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.78 (45.2) 1.91 (48.5) 2.03 (51.6) 2.16 (54.9) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) Shell Size 18 20 22 24 A Dia Max 1.594 (40.5) 1.719 (43.7) 1.844 (46.8) 1.969 (50.0) B Dim C Dim 2.38 (60.5) 2.50 (63.5) 2.63 (66.8) 2.75 (69.9) 1.969 (50.0) 2.094 (53.2) 2.219 (56.4) 2.344 (59.5) 55 22 32 66 30 8 30 41 79 38 55 85 48 61 Notes 1.Assembly identified with manufacturer's name and P/N, space permitting. 2.Performance capabilities: • Current rating: size 16 contact - 750 VDC, 10 amps size 20 contact - 500 VDC, 5 amp size 22 contact- 500 VDC, 3 amp • Hydrostatic pressure rating: 5000 PSI, fully mated • insulation resistance: 1000 megaohms @ 500 VDC 100 Series 22 Geo-Marine® Note: electrical safety limits to be set by user peak voltages switching surges, transients, etc. should be used to determine safe applications. Position from keyway will vary. 3.Material/finish: • Barrel - 316 stainless steel/passivate • Hardware - 300 series stainless steel/ passivate coupling nut - nickelaluminum-bronze/degrease • Contacts - copper alloy/gold plate • Insulator - high grade rigid dielectric/ na o-rings - nitrile/na U.S. CAGE Code 06324 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-13 E-Mail: [email protected] D Geo-Marine® Custom Applications Geo-Marine® MIL-DTL-5015 Type Connectors 257-003, 257-005, 257-007 and 257-012 Insert Arrangements and Specifications (Face View of Pin Insert Shown) Insert Arrangement Contact Size & Quantity MS Service Rating Alternative Position 10SL-4 2 - #16 A N/A 10SL-3 3 - #16 A N/A 12-10 10 - #20 INST N/A 14S-2 4 - #16 INST X&Y 14S-5 5 - #16 INST X 14S-6 6 - #16 INST N/A 14S-7 7 - #16 INST N/A (Face View of Pin Insert Shown) Insert Arrangement Contact Size & Quantity MS Service Rating Alternative Position 16S-1 7 - #16 A W&Z 18-1 10 - #16 4A 6 INST W, X, Y & Z 20-29 17 - #16 A W&Z 22-1 2 - #8 D N/A 24-11 6 - #12, 3 - #8 A W,X,Y & Z Connector Specifications Barrel and Rear Accessory Hardware Coupling Nut Insulator, O-Ring, Grommet Contacts Contact Current Rating Rated Operating Voltage Dielectric Withstanding Voltage (Hi-Pot) D Insulation Resistance Temperature Range © 2014 Glenair, Inc. Passivated Stainless Steel Nickel/Aluminum/Bronze Nitrile/Neoprene Gold Plated Copper Alloy with Solder Pots #20-7.5 Amps #16-13 Amps #12-23 Amps #8-43 Amps Service Rating INST - 250 VDC Service Rating A - 700 VDC Service Rating INST - 1000 VRMS Service Rating A - 2000 VRMS 5000 Megohms minimum at 500 VDC and +25°C -55°C to +125°C Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-14 E-Mail: [email protected] Geo-Marine® Custom Applications 257-003 Connector Receptacle Assembly Stainless Steel Harsh Environment UNEF Threads How To Order Sample Part Number 257 Series No. 257 Basic No. -003 Class H = Hermetic – = Standard Connector Style 2 = Receptacle Shell Size See Table I Insert Arrangement Dash No. See page D-14 -003 H 2 Contact Style P = Pin S = Socket (Non-Hermetic) Alternate Insert Position See page D-14 Molding Adapter M = Molding Adapter Omit for none B Thread -14S O-Ring .156 (4.0) Max Panel .030 (0.8) Min Panel Polarizing Key -5 P W M RECOMMENDED PANEL CUT-OUT A Thread G C Dia .540 (13.7) F E D Insert Arrangement with Solder Pot Contacts (Page D-14) 1.620 (41.1) Max Table I Shell Size A Thread Class 2A B Thread Class 2A C Max 10SL 12 14S 18 20 24 28 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 1/8 - 18 UNEF 1 1/4 - 18 UNEF 1 1/2 - 18 UNEF 1 3/4 - 18 UNEF 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 1/8 - 16 UN 1 1/4 - 16 UN 1 1/2 - 16 UN 1 3/4 - 16 UN 1.030 (26.2) 1.160 (29.5) 1.280 (32.5) 1.660 (42.2) 1.780 (45.2) 2.030 (51.6) 2.280 (57.9) D +.010 (0.3) -.000 .653 (16.6) .760 (19.3) .885 (22.5) 1.135 (28.8) 1.260 (32.0) 1.510 (38.4) 1.760 (44.7) E +.010 (0.3) -.000 .585 (14.9) .710 (18.0) .835 (21.2) 1.085 (27.6) 1.210 (30.7) 1.460 (37.1) 1.710 (43.4) F Max G Max .812 (20.6) .938 (23.8) 1.125 (28.6) 1.500 (31.8) 1.625 (41.3) 1.875 (47.6) 2.125 (54.0) .940 (23.9) 1.090 (27.7) 1.250 (31.8) 1.690 (42.9) 1.820 (46.2) 2.120 (53.8) 2.420 (61.5) Notes: 1.Metric dimensions (mm) are indicated in parentheses. 2.Electrical safety limits must be established by the user. Peak voltages, switching surges, etc., should be used to determine the safety of the application. © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-15 E-Mail: [email protected] D Geo-Marine® Custom Applications 257-003 Connector Plug Assembly Stainless Steel Harsh Environment How To Order Sample Part Number 257 Series No. 257 Basic No. -003 Connector Style 6 = Plug Shell Size See Table I Insert Arrangement Dash No. See page D-14 -003 -6 -14S -5 Contact Style P = Pin S = Socket (Non-Hermetic) Alternate Insert Position See page D-14 Molding Adapter M = Molding Adapter N = No Adapter (Connector Only) Omit = Connector with Wire Mesh Cable Grip Optional Entry See Table II. Omit for Standard P W M 08 STYLE I Length C Cable Grip A Dia Cable Range Knurl Style Mfr Option .125 (3.2) Sand Blast O-Ring B Hex Flats D STYLE II © 2014 Glenair, Inc. STYLE M MOLDING ADAPTER OPTION Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-16 E-Mail: [email protected] Geo-Marine® Custom Applications 257-003 Connector Plug Assembly Stainless Steel Harsh Environment Table I Shell Size A Max B Flats 10SL 12 14S 18 20 24 28 1.031 (26.2) 1.125 (28.6) 1.219 (31.0) 1.406 (35.7) 1.531 (38.9) 1.781 (45.2) 2.031 (51.6) 1.000 (25.4) 1.380 (35.1) 1.000 (25.4) 1.220 (31.0) 1.500 (38.1) 1.500 (38.1) 1.500 (38.1) Standard Cable Range Min Max .210 (5.3) .312 (7.9) .500 (12.7) .625 (15.9) .210 (5.3) .312 (7.9) .310 (7.9) .438 (11.1) .530 (13.5) .750 (19.1) .530 (13.5) .750 (19.1) .530 (13.5) .750 (19.1) Config Style Max Cable Entry (Table II) Length Max I II I I I I I 04 08 10 12 14 16 16 3.000 (76.2) 3.000 (76.2) 3.000 (76.2) 3.000 (76.2) 3.500 (88.9) 3.500 (88.9) 3.500 (88.9) Table II Dash No. C Ref 03 04 06 08 10 12 14 16 5.120 (130.0) 5.750 (146.1) 7.000 (177.8) 7.120 (180.8) 7.370 (184.3) 9.000 (228.6) 8.000 (203.2) 9.000 (228.6) Cable Range Min Max .180 (4.6) .210 (5.3) .210 (5.3) .312 (7.9) .310 (7.9) .438 (11.1) .438 (11.1) .500 (12.7) .500 (12.7) .625 (15.9) .530 (13.5) .750 (19.1) .750 (19.1) .875 (22.2) .875 (22.2) 1.000 (25.4) D Notes: 1.Metric dimensions (mm) are indicated in parentheses. 2.Electrical safety limits must be established by the user. Peak voltages, switching surges, etc., should be used to determine the safety of the application. © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-17 E-Mail: [email protected] Geo-Marine® Custom Applications 257-005 Connector Receptacle Assembly Stainless Steel Harsh Environment with Printed Circuit Board Contacts How To Order Sample Part Number 257 Series No. 257 Basic No. -005 Class H = Hermetic – = Standard Connector Style 2 = Receptacle Shell Size See Table I Insert Arrangement Dash No. See page D-14 -005 H Contact Style P = Pin S = Socket (Non-Hermetic) Alternate Insert Position See page D-14. Omit for Normal Molding Adapter M = Molding Adapter Omit = None .170 (4.3) (See Note 3) .065/.060 (1.7/1.5) Dia (See Note 3) 2 -14S -5 P W M Polarizing Key E .500 (12.7) Max panel RECOMMENDED PANEL CUT-OUT A Thread F B Dia D C .450 (11.4) Insert Arrangement with Solder Pot Contacts (Page D-14) 1.820 (46.2) Max Table I Shell Size D 10SL 12 14S 18 20 24 28 A Thread Class 2A 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 1/8 - 18 UNEF 1 1/4 - 18 UNEF 1 1/2 - 18 UNEF 1 3/4 - 18 UNEF B Dia Max 1.030 (26.2) 1.160 (29.5) 1.280 (32.5) 1.660 (42.2) 1.780 (45.2) 2.030 (51.6) 2.280 (57.9) C Dia D +.010 (0.3) -.000 +.010 (0.3) -.000 .653 (16.6) .585 (14.9) .760 (19.3) .710 (18.0) .885 (22.5) .835 (21.2) 1.135 (28.8) 1.085 (27.6) 1.260 (32.0) 1.210 (30.7) 1.510 (38.4) 1.460 (37.1) 1.760 (44.7) 1.710 (43.4) E Flats F Ref .870 (22.1) .995 (25.3) 1.120 (28.4) 1.495 (38.0) 1.620 (41.1) 1.870 (47.5) 2.120 (53.8) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.730 (43.9) 1.870 (47.5) 2.165 (55.0) 2.448 (62.2) Notes: 1.Metric dimensions (mm) are indicated in parentheses. 2.Electrical safety limits must be established by the user. Peak voltages, switching surges, etc., should be used to determine the safety of the application. 3.Applies to size 16 contacts only. Consult factory for other sizes © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-18 E-Mail: [email protected] Geo-Marine® Custom Applications 257-007 Connector Receptacle Assembly Stainless Steel Harsh Environment Special Threads How To Order Sample Part Number 257 Series No. 257 Basic No. -007 Class H = Hermetic – = Standard Connector Style 2 = Receptacle Shell Size See Table I Insert Arrangement Dash No. See page D-14 -007 H Contact Style P = Pin S = Socket (Non-Hermetic) Alternate Insert Position See page D-14. Omit for Normal Molding Adapter M = Molding Adapter Omit = None 2 -14S -5 P W M Polarizing Key O-Ring C Thread RECOMMENDED PANEL CUT-OUT .156 (4.0) Max .030 (0.8) Min Panel B Thread A Thread H D Dia .540 (13.7) F G E 1.620 (41.1) Max Insert Arrangement with Solder Pot Contacts (Page D-14) Table I Shell Size A Thread Class 2A B Thread Class 2A C Thread Class 2A D Dia Max 10SL 12 14S 18 20 24 28 .625 - .1P-1L .750 - .1P-1L .875 - .1P-1L 1.125 - .1P-1L 1.250 - .1P-1L 1.500 - .1P-1L 1.750 - .1P-1L 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 1/4 - 18 UNEF 1 1/2 - 18 UNEF 1 3/4 - 18 UNEF 2 - 18 UNEF 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 1/8 - 16 UN 1 1/4 - 16 UN 1 1/2 - 16 UN 1 3/4 - 16 UN 1.100 (27.9) 1.250 (31.8) 1.450 (36.8) 1.750 (44.5) 2.030 (51.6) 2.340 (59.4) 2.550 (64.8) E Dia + .010 (0.3) -.000 (0) .760 (19.3) .885 (22.5) 1.010 (25.7) 1.260 (32.0) 1.510 (38.4) 1.760 (44.7) 2.010 (51.1) F + .010 (0.3) -.000 (0) .710 (18.0) .835 (21.2) .965 (24.5) 1.210 (30.7) 1.460 (37.1) 1.710 (43.4) 1.960 (49.8) G Flats H Max .938 (23.8) 1.062 (27.0) 1.250 (31.8) 1.500 (38.1) 1.750 (44.5) 2.000 (50.8) 2.187 (55.5) 1.090 (27.7) 1.230 (31.2) 1.440 (36.6) 1.730 (43.9) 2.020 (51.3) 2.320 (58.9) 2.530 (64.3) Notes: 1.Metric dimensions (mm) are indicated in parentheses. 2.Electrical safety limits must be established by the user. Peak voltages, switching surges, etc., should be used to determine the safety of the application. © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-19 E-Mail: [email protected] D Geo-Marine® Custom Applications 257-007 Connector Plug Assembly Stainless Steel Harsh Environment How To Order Sample Part Number 257 Series No. 257 Basic No. -003 Connector Style 6 = Plug Shell Size See Table I Insert Arrangement Dash No. See page D-14 -007 -6 -14S -5 P Contact Style P = Pin S = Socket Alternate Insert Position See page D-14. Omit for Normal Molding Adapter M = Molding Adapter N = No Adapter (Connector Only) Omit = Connector with Wire Mesh Cable Grip Optional Entry See Table II. Omit for Standard W M 08 STYLE I Length Polarizing Keyway C Cable Grip A Dia Cable Range .125 (3.2) Knurl Style Mfr Option Sand Blast O-Ring B Hex Flats STYLE II D © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-20 E-Mail: [email protected] Geo-Marine® Custom Applications 257-007 Connector Plug Assembly Stainless Steel Harsh Environment Table I Shell Size A Max B Flats 10SL 12 14S 18 20 24 28 1.031 (26.2) 1.125 (28.6) 1.219 (31.0) 1.406 (35.7) 1.531 (38.9) 1.781 (45.2) 2.031 (51.6) .870 (22.1) 1.250 (31.8) .870 (22.1) 1.000 (25.4) 1.380 (35.1) 1.380 (35.1) 1.380 (35.1) Standard Cable Range Min Max .210 (5.3) .312 (7.9) .500 (12.7) .625 (15.9) .210 (5.3) .312 (7.9) .310 (7.9) .438 (11.1) .530 (13.5) .750 (19.1) .530 (13.5) .750 (19.1) .530 (13.5) .750 (19.1) Config Style Max Cable Entry (Table II) Length Max I II I I I I I 04 08 10 12 14 16 16 3.000 (76.2) 3.000 (76.2) 3.000 (76.2) 3.000 (76.2) 3.500 (88.9) 3.500 (88.9) 3.500 (88.9) Table II Dash No. C Ref 03 04 06 08 10 12 14 16 5.120 (130.0) 5.750 (146.1) 7.000 (177.8) 7.120 (180.8) 7.370 (184.3) 9.000 (228.6) 8.000 (203.2) 9.000 (228.6) Cable Range Min Max .180 (4.6) .210 (5.3) .210 (5.3) .312 (7.9) .310 (7.9) .438 (11.1) .438 (11.1) .500 (12.7) .500 (12.7) .625 (15.9) .530 (13.5) .750 (19.1) .750 (19.1) .875 (22.2) .875 (22.2) 1.000 (25.4) D Notes: 1.Metric dimensions (mm) are indicated in parentheses. 2.Electrical safety limits must be established by the user. Peak voltages, switching surges, etc., should be used to determine the safety of the application. © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-21 E-Mail: [email protected] Geo-Marine® Custom Applications 257-012 Test Connector Receptacle Assembly Stainless Steel Harsh Environment How To Order Sample Part Number 257 -012 H 2 Series No. 257 Basic No. -005 Class H = Hermetic – = Standard Connector Style 2 = Receptacle Shell Size See Table I Insert Arrangement Dash No. See page D-14 Contact Style P = Pin S = Socket (Non-Hermetic) Alternate Insert Position See page D-14. Omit for Normal Molding Adapter M = Molding Adapter Omit = None -14S -5 P W M Sand Blast REF: GLENAIR 290WS018 (P) B Thread REF: GLENAIR 290WS011 (M) Polarizing Key .156 Max. Panel .030 Min. Panel A Thread Typ. C Dia G E .54 F D Insert Arrangement With Solder Pot Contacts, See Face Views & P/N Development 1.62 Max Recommended Panel Cutout Table I D Shell Size A Thread Class 2A B Thread Class 2A C Max 10SL 12 14S 16S 18 20 24 28 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 1/8 - 18 UNEF 1 1/4 - 18 UNEF 1 1/2 - 18 UNEF 1 3/4 - 18 UNEF 5/8 - 24 UNEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1 1/8 - 16 UN 1 1/4 - 16 UN 1 1/2 - 16 UN 1 3/4 - 16 UN 1.030 (26.2) 1.160 (29.5) 1.280 (32.5) 1.420 (36.1) 1.660 (42.2) 1.780 (45.2) 1.030 (26.2) 2.280 (57.9) D + .010 (0.3) -.000 (0) .653 (16.6) .760 (19.3) .885 (22.5) 1.010 (25.7) 1.135 (28.8) 1.260 (32.0) 1.510 (38.4) 1.760 (44.7) E + .010 (0.3) -.000 (0) .585 (14.9) .710 (18.0) .835 (21.2) .960 (24.4) 1.085 (27.6) 1.210 (30.7) 1.460 (37.1) 1.710 (18.4) F Max G Max .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.500 (38.1) 1.625 (41.3) 1.875 (47.6) 2.125 (54.0) .940 (23.9) 1.090 (27.7) 1.250 (31.8) 1.390 (35.3) 1.690 (42.9) 1.820 (46.2) 2.120 (53.8) 2.420 (61.5) Notes: 1.Metric dimensions (mm) are indicated in parentheses. 2.Electrical safety limits must be established by the user. Peak voltages, switching surges, etc., should be used to determine the safety of the application. © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Rev 7-11-14 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-22 E-Mail: [email protected] Geo-Marine® Custom Applications 257-163 Flange Mount and 257-164 Weld Mount Connector Receptacle Assemblies Stainless Steel How To Order Sample Part Number 257 -163 H -14S Series No. 257 Basic No. -005 Class H = Hermetic – = Standard Shell Size See Table I Insert Arrangement Dash No. See page D-14 Contact Style P = Pin S = Socket (Non-Hermetic) Alternate Insert Position See page D-14. Omit for Normal -5 P C Typ 257-163 Flange Mount W M Polarizing Key D Thread A Dia B Typ E Hole Thru Typ. H F Insert Arrangements (See Page D-14) .915 (23.2) Max .045 (1.1) ± .006 (.2) 257-164 Weld Mount J Dia Polarizing Key K Dia A Dia L Dia M Dia .058 (1.5) ± .002 (.1) Insert Arrangements (See Below) D Thread .035 (.9) Max H F D © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-23 E-Mail: [email protected] Geo-Marine® Custom Applications 257-163 Flange Mount and 257-164 Weld Mount Connector Receptacle Assemblies Stainless Steel Table I Shell Size A Max B Sq.±.031 (.8) C ±.005 (.1) D Thread Class 2A UNEF 10SL 12 14S 18 20 22 24 .609 (15.5) .650 (16.5) .733 (18.6) .975 (24.8) 1.105 (28.1) 1.328 (33.7) 1.350 (34.3) 1.000 (25.4) 1.094 (27.8) 1.188 (30.2) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) .719 (18.3) .812 (20.6) .906 (23.0) 1.062 (27.0) 1.156 (29.4) 1.250 (31.8) 1.375 (34.9) .625 -24 .750 -20 .875 -20 1.125 -18 1.250 -18 1.375 -18 1.500 -18 E +.010 (.1) -.005 (1.3) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .120 (3.0) .147 (3.7) .147 (3.7) F Max 1.000 (25.4) 1.000 (25.4) 1.000 (25.4) 1.200 (30.5) 1.200 (30.5) 1.200 (30.5) 1.200 (30.5) Table II Shell Size 10SL 12 14S 18 20 22 24 H +.031 (.8) -.000 (.0) .562 (14.3) .562 (14.3) .562 (14.3) .724 (18.4) .724 (18.4) .724 (18.4) .724 (18.4) J Dia K Dia L Dia M Dia .750 (19.1) .906 (23.0) 1.016 (25.8) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) .825 (21.0) .950 (24.1) 1.075 (27.3) 1.275 (32.4) 1.450 (36.8) 1.575 (40.0) 1.700 (43.2) 1.061 (26.9) 1.187 (30.1) 1.279 (32.5) 1.479 (37.6) 1.654 (42.0) 1.744 (44.3) 1.879 (47.7) 1.132 (28.8) 1.258 (32.0) 1.345 (34.2) 1.550 (39.4) 1.725 (43.8) 1.815 (46.1) 1.950 (49.5) Table III: Material/Finish Shell Insulator O-Ring, Grommet Contacts Contact Current Rating Rated Operating Voltage D Dielectric Withstanding Voltage (Hi-Pot) Insulation Resistance Temperature Range © 2014 Glenair, Inc. Non-Hermetic Receptacles Passivated Stainless Steel Nitrile/Neoprene Nitrile/Neoprene Gold Plated Copper Alloy With Solder Pots #20-7.5 Amps #16-13 Amps #12-23 Amps #8-43 Amps Service Rating INST - 250 VDC Service Rating A - 700 VDC Service Rating D - 1250 VDC Service Rating INST - 1000 VRMS Service Rating A - 2000 VRMS Service Rating D - 2800 VRMS 5000 Megohms minimum at 500 VDC and +25°C -55°C to +125°C Series 22 Geo-Marine® Hermetic Receptacles Passivated Stainless Steel Full Glass Nitrile/Neoprene Alloy 52/Gold Plate #20-5 Amps #16-10 Amps #12-17 Amps #8-35 Amps 250 VDC 1000 VRMS 5000 Megohms minimum at 500 VDC and +25°C -55°C to +125°C U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-24 E-Mail: [email protected] Geo-Marine® Custom Applications 257-165 Stainless Steel Plug Assembly and 257-166 Stainless Steel Receptacle Assembly How To Order Sample Part Number 257 Series No. 257 Basic No. -165 = Plug -166 = Receptacle Shell Size/Insert Arrangement See page D-14 -165 -14S Contact Style P = Pin S = Socket (Non-Hermetic) Alternate Insert Position See page D-14. N for Normal Molding Adapter M = Molding Adapter N = No Adapter, Connector Only Omit for Standard Optional Entry See Table II P X M Length Typ. D Thread 08 C Typ. O-Ring Cable Grip A Dia Typ 257-165 Plug Style II H Knurl Style Mfr. Option - Typ. D Thread 257-165 Plug Style I Sand Blast 257-166 Receptacle B Hex Flats Cable Range Typ. .135 (3.4) ± .005 (.1) Molding Adapter Option D © 2014 Glenair, Inc. Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-25 E-Mail: [email protected] Geo-Marine® Custom Applications 257-165 Stainless Steel Plug Assembly and 257-166 Stainless Steel Receptacle Assembly Table I Shell Size Config. Style A Max B Flats D Thread Class 2A UNEF 10SL 12 14S 18 20 22 24 I II I I I I I 1.031 (26.2) 1.125 (28.6) 1.219 (31.0) 1.406 (35.7) 1.531 (38.9) 1.645 (41.8) 1.781 (45.2) 1.00 (25.4) 1.35 (34.3) 1.00 (25.4) 1.12 (28.4) 1.50 (38.1) 1.50 (38.1) 1.50 (38.1) .625 -24 .750 -20 .875 -20 1.125 -18 1.250 -18 1.375 -18 1.500 -18 H +.031 (.8) -.000 (0) .562 (14.3) .562 (14.3) .562 (14.3) .724 (18.4) .724 (18.4) .724 (18.4) .724 (18.4) Table I (continued) Shell Size 10SL 12 14S 18 20 22 24 Cable Range Min .210 (5.3) .500 (12.7) .210 (5.3) .310 (7.9) .530 (13.5) .530 (13.5) .530 (13.5) Max .312 (7.9) .625 (15.9) .312 (7.9) .438 (11.1) .750 (19.1) .750 (19.1) .750 (19.1) Length Max 3.00 (76.2) 3.00 (76.2) 3.00 (76.2) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) Table II (Optional Entries) Max Dash No. Style I Dash No. 04 08 10 12 14 14 16 03 04 06 08 10 12 14 16 Cable Range Min Max .180 (4.6) .210 (5.3) .210 (5.3) .312 (7.9) .310 (7.9) .438 (11.1) .438 (11.1) .500 (12.7) .500 (12.7) .625 (15.9) .530 (13.5) .750 (19.1) .750 (19.1) .875 (22.2) .875 (22.2) 1.000 (25.4) C Ref 5.12 (130.0) 5.75 (146.1) 7.00 (177.8) 7.12 (180.8) 7.37 (187.2) 9.00 (228.6) 8.00 (203.2) 9.00 (228.6) Table III: Material/Finish Barrel and Rear Accessory Hardware Coupling Nut Insulator, O-Ring, Grommet Contacts Contact Current Rating Rated Operating Voltage D Dielectric Withstanding Voltage (Hi-Pot) Insulation Resistance Temperature Range © 2014 Glenair, Inc. Passivated Stainless Steel Nickel/Aluminum/Bronze Nitrile/Neoprene Gold Plated Copper Alloy With Solder Pots #20-7.5 Amps #16-13 Amps #12-23 Amps #8-43 Amps Service Rating INST - 250 VDC Service Rating A - 700 VDC Service Rating D - 1250 VDC Service Rating INST - 1000 VRMS Service Rating A - 2000 VRMS Service Rating D - 2800 VRMS 5000 Megohms minimum at 500 VDC and +25°C -55°C to +125°C Series 22 Geo-Marine® U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com D-26 E-Mail: [email protected] SERIES 10KPSI Underwater Interconnect Assemblies 7.5 Amps to 200 Amps One to Eight Contacts 10,000 PSI (Mated) Pressure Rating G Catalog and Custom Cable Options lenair 10 KPSI Underwater Interconnects provide a cost-effective solution for high pressure underwater applications. Ideal for any harsh environment application, these molded neoprene cables and epoxy bulkhead connectors are impervious to most chemicals. Gold-Plated Pins Neoprene Jacket Neoprene Body Chemically Resistant Molded O-Ring Neoprene Body Neoprene Jacket Gold-Plated Socket Contacts Male Cable Assembly Glass-Filled Epoxy Body Female Cable Assembly O-Ring Gold-Plated Pins Male Bulkhead Connector D-27 © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Stainless Steel Nut and Washer Solder Cup Pins SERIES 10KPSI Underwater Interconnect Assemblies How-to-order MALE CABLE ASSEMBLIES Number of Contacts A Dia B C GL20G1P-M GL20K1P-M GL20G2P-M GL20G3P-M GL20G4P-M GL20K4P-M .75 (19.1) 1.06 (26.9) .75 (19.1) .75 (19.1) .75 (19.1) 1.06 (26.9) 2.65 (67.3) 3.25 (82.6) 2.65 (67.3) 2.65 (67.3) 2.65 (67.3) 3.25 (82.6) 2.00 (50.8) 2.62 (66.5) 2.00 (50.8) 2.00 (50.8) 2.00 (50.8) 2.62 (66.5) 5 GL20K5P-M 1.06 (26.9) 6 1 #12, 5 #16 2 feet GL20K6P-M 1.06 (26.9) 8 1 #12, 7 #16 2 feet GL20K8P-M 1.06 (26.9) *For other lengths, add overall length in feet to the part number. Example: GL20G1P-M-6 specifies a cable assembly 6 feet in length 3.25 (82.6) 3.25 (82.6) 3.25 (82.6) 2.62 (66.5) 2.62 (66.5) 2.62 (66.5) 2 3 B Cable Length* 2 feet 2 feet 2 feet 2 feet 2 feet 2 feet 2 feet Part Number 1 C Contact Quantity/Size 1 #10 1 #0 1 #10, 1#12 1 #10, 2 #12 1 #12, 3 #16 1 #10, 3 #12 1 #10, 4 #16 4 A FEMALE CABLE ASSEMBLIES A Number of Contacts Contact Cable Part Number A Dia Quantity/Size Length* 1 #10 2 feet GL20G1S-F .75 (19.1) 1 1 #0 2 feet GL20K1S-F 1.06 (26.9) 2 1 #10, 1#12 2 feet GL20G2S-F .75 (19.1) 3 1 #10, 2 #12 2 feet GL20G3S-F .75 (19.1) 1 #12, 3 #16 2 feet GL20G4S-F .75 (19.1) 4 1 #10, 3 #12 2 feet GL20K4S-F 1.06 (26.9) 5 1 #10, 4 #16 2 feet GL20K5S-F 1.06 (26.9) 6 1 #12, 5 #16 2 feet GL20K6S-F 1.06 (26.9) 8 1 #12, 7 #16 2 feet GL20K8S-F 1.06 (26.9) *For other lengths, add overall length in feet to the part number. Example: GL20G1S-F-6 specifies a cable assembly 6 feet in length B B 2.65 (67.3) 3.50 (88.9) 2.65 (67.3) 2.65 (67.3) 2.65 (67.3) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) 3.50 (88.9) MALE BULKHEAD CONNECTORS C B A .560 (14.2) D D-28 Number of Contact Part Number Contacts Quantity/Size 1 #10 GL30G1P-BC 1 1 #0 GL30K1P-BC 2 1 #10, 1#12 GL30G2P-BC 3 1 #10, 2 #12 GL30G3P-BC 1 #12, 3 #16 GL30G4P-BC 4 1 #10, 3 #12 GL30K4P-BC 5 1 #10, 4 #16 GL30K5P-BC 6 1 #12, 5 #16 GL30K6P-BC 8 1 #12, 7 #16 GL30K8P-BC A B C Max D Hex E Thread 2.625 (66.7) 3.625 (92.1) 2.625 (66.7) 2.625 (66.7) 2.625 (66.7) 3.625 (92.1) 3.625 (92.1) 3.625 (92.1) 3.625 (92.1) .625 (15.9) 1.375 (34.9) .625 (15.9) .625 (15.9) .625 (15.9) 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.58 (40.1) 1.89 (48.0) 1.58 (40.1) 1.58 (40.1) 1.58 (40.1) 1.89 (48.0) 1.89 (48.0) 1.89 (48.0) 1.89 (48.0) 1.375 (34.9) 1.625 (41.3) 1.375 (34.9) 1.375 (34.9) 1.375 (34.9) 1.625 (41.3) 1.625 (41.3) 1.625 (41.3) 1.625 (41.3) 3/4 - 16 1 - 14 3/4 - 16 3/4 - 16 3/4 - 16 1 - 14 1 - 14 1 - 14 1 - 14 © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 SERIES 10KPSI Underwater Interconnect Assemblies Specifications, contact arrangements and accessories Specifications Male Bulkhead Connector Contacts O-Rings Nut, Washer Cable Bulkhead Connector Body Voltage Rating Current Rating Temperature Rating Copper Alloy, Gold-Plated Nitrile Stainless Steel Neoprene insulation, Stranded Copper Conductor Glass-Filled Epoxy 600 VDC See Contact Arrangements -55o C to +105o C Contact Arrangements and Current Rating 1 Contact 1 #10 Contact 20 Amps G1 1 #0 Contact 200 Amps K1 4 contacts 1 #12 Contact 3 #16 Contacts 7.5 Amps G4 1 #10 Contact 3 #12 Contacts 7.5 Amps K4 2 contacts 3 contacts 1 #10 Contact 1 #12 Contact 10 Amps G2 1 #10 Contact 2 #12 Contact 10 Amps G3 5 contacts 6 contacts 8 contacts 1 #10 Contact 4 #16 Contacts 7.5 Amps K5 1 #10 Contact 5 #16 Contacts 7.5 Amps K5 1 #10 Contact 7 #16 Contacts 6 Amps K8 ACCESSORIES Locking Sleeves O-Rings Locking Sleeves enable a mated pair of cable assemblies to be locked together, preventing accidental unmating. Material: Delrin. Male Cable Part No. GL20G*P GL20K*P GL20G*S GL20K*S D-29 Replacement O-Rings for bulkhead connectors. Material: Nitrile Female Type Male Male Female Female Sleeve Part No. GL20G401 GL20K403 GL20G402 GL20K404 Cable Part No. GL30G GL30K © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 O-Ring 2-213 2-217 QUALIFIED MIL-DTL-28840 Connectors and Accessories High Density, Scoop Proof Contact Arrangements Flange Mount, Box Mount, Jam-Nut and In-Line Receptacles Straight, 45° and 90° Strain Reliefs and Backshell Assemblies Sav-Con® Connector Savers MIL-DTL-28840 Qualified MIL-DTL-28840 qualified connectors in-stock and ready for immediate, same-day shipment Additional Glenair Commercial Part Numbers with Features Not Available in the Mil-Spec Qualified military standard electrical connectors and accessories for shipboard—and all rugged environmental applications QPL Performance Specifications Current Rating (Maximum) Test Voltage (DWV) Insulation Resistance Contact Resistance Operating Temperature Immersion Shock Vibration Magnetic Permeability Shell Size 11 7 Contacts Shell Size 23 64 Contacts D-30 Size #20 Contact; 20AWG 7.5A, 22AWG 5.0A, 28AWG 1.5A, 30AWG 1.0A 1000 VAC RMS at sea level. Test per EIA-364-20 5000 megohms minimum (at ambient temperature) per EIA-364-21 Per SAE-AS39029 -55° C. to +200° C. per test method EIA-364-09 in accordance with MIL-S-901 grade A per EIA-364-28 test procedure 2.0 µ (Aluminum), 5.0 µ (Stainless Steel) maximum; ASTM-A342/A342M Shell Size 13 12 Contacts Shell Size 25 92 Contacts Shell Size 15 21 Contacts Splined MIL-DTL-28840 connector-to-backshell interface is ideally suited for heavy backshells and cables Shell Size 17 31 Contacts Shell Size 29 121 Contacts © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Shell Size 19 42 Contacts Shell Size 33 155 Contacts QUALIFIED MIL-DTL-28840 Connectors and Accessories STANDARD PIN CRIMP CONTACT FOR MIL-DTL-28840 CONNECTORS Mating End Wire Size Accomodation 20 20 20 28-32 AWG 22-26 AWG 20-24 AWG Military Part Number Glenair Part Number M39029/83-451 M39029/83-450 M39029/83-508 850-004-20-451 850-004-20-450 850-004-20-508 STANDARD SOCKET CRIMP CONTACT FOR MIL-DTL-28840 CONNECTORS Mating End Wire Size Accomodation 20 20 20 Crimping Tools 28-32 AWG 22-26 AWG 20-24 AWG Military Part Number Glenair Part Number M39029/84-453 M39029/84-452 M39029/84-509 850-005-20-453 850-005-20-452 850-005-20-509 Insertion & Removal Tools M22520/34-01 Basic Crimp Tool M22520/34-02 Positioner M22520/35 Gage M81969/33-01 Straight Insertion Tool M81969/33-02 Offset Insertion Tool M81969/34-01 Removal Tool Pin Contact Socket Contact M39029/83 Standard Duty Electrical Pin Contact Strain Reliefs “E” Nuts Environmental Backshells M28840/6 B Straight M28840/9 B 45° M28840/8 B 90° Dummy Stowage Receptacles M28840/7 D-31 EMI/RFI Environmental Backshells M28840/6 A Straight M28840/8 A 90° M28840/9 A 45° Protective Plug Covers M28840/15 Connector Sockets 600G005 Protective Receptacle Covers M28840/13 Jam Nuts MS3186 Non-Self-Locking Non-Self-Locking M28840/1 Straight M28840/3 45° M28840/2 90° M28840/23 MIL-PRF-24758A Conduit Fittings Mounting Flanges and Gaskets M28840/24 Gasket M39029/84 Standard Duty Electrical Socket Contact M24758-14 Straight (M24758/14 Straight.) M28840/5 Straight • M28840/25 90° • M28840/27 45° • M28840/30 Coupling © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 MARINE BRONZE Seacrow Connectors for harsh-environment applications G lenair manufactures connectors qualified to V96929, VG95234 and VG95328 standards. These connectors are mostly used in harsh-environment military applications for ground vehicles and ground systems. Our new Marine Bronze version increases the level of robustness of these connectors to be succesfully used in all severe environment navy installations, as well as off-shore platforms, sea ports, geological and oceanographic applications. Marine bronze alloy for superior corrosion resistance in seawater and other harsh environments Ideal for shipboard and offshore drilling applications Available in Series ITS, Series IPT, Series IGE and Series IT IP67 standard environmental sealing, IP68 available Harsh-environment shipboard application D-32 © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 MARINE BRONZE Seacrow Connectors ITS-MB REVERSE-BAYONET CONNECTORS VG95234 Compliant Marine Bronze Series ITS-MB connectors are compliant with VG95234, using all the same insert arrangements available in the standard ITS Reverse Bayonet Connectors catalogue. Typically they are used for power and signal transmission, with wires from 32 AWG to 4/0. A wide variety of backshells allow the ITS-MB to accept jacketed cables, single or multi-poles, with or without RFI/EMI shielding, conduits with PG or metric thread. IP67 protection is the standard performance. IP68 on request. IPT-MB MIL-C-26482 HIGH DENSITY CONNECTORS VG95328 Compliant Marine Bronze Series IPT-MB connectors are the choice for reliability when 20-16 AWG signal cables are used. The insert arrangements as well as the electrical characteristics are detailed in the IPT IPT-SE Catalogue. Backshells suitable for EMI shield terminations and heat shrink boots are also available. The receptacle is also available with PCB contacts. IP67 protection is the standard performance. IP68 on request. IGE-MB REVERSE-BAYONET SINGLE-POLE CONNECTORS VG96929 Compliant Marine Bronze Series IGE-MB High Power Single Pole Connectors are used with cables from 16 to 240 mmq. These connectors achieve high-performance working current and peak current, and are ideal for engines, power supplies, and power distribution boxes. Several backshells are available, either straight or 90° elbows for the most reliable cable accomodation. See the VG96929 Catalogue for detailed electrical characteristics. IP67 protection is the standard performance. IP68 on request. IT-MB MIL-C-5015G THREADED CONNECTORS VG95234 Compliant Marine Bronze Series IT-MB is a threaded connector compliant with the MIL-DTL-5015 standard. All the electrical characteristics are available in the IT standard catalogue. IT-MB family is a threaded version mostly used for power and signal, frequently utilized with high-performance IP68 sealing. IP67 is considered standard performance. D-33 © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 RADGRIP™ COUPLING NUTS For fast, easy mating of ITS Series bayonet connectors plus improved coupling nut mechanical protection Better grip, improved durability Glenair ITS-RG Series connector plugs with RadGrip™ rubber coupling nut covers was developed for harsh environmental field applications. RadGrip™ covers feature wide, easy-to-grip castellations as well as a raised thumb tab. Built for maximum durability and mechanical protection of plug coupling nuts, RadGrip™ is the perfect solution for advanced protection against shock and other forms of mechanical damage. In addition, RadGrip™ facilitates rapid mating and demating of connectors, even when surfaces are contaminated with oil, dust, water and other fluids. The highly durable rubber compound may be specified in seven different colors for improved connector and cable identification. Colors available: Black, Yellow, Red, Blue, Light Green, Orange and Grey. RadGrip™ material specifications IAW UNI-CEI 11170 - AFNOR NF-F 16101 - BSS 7239 - ASTME - 162, ASTM E-662 RadGrip™ covers adhere easily to Aluminum alloy, Stainless steel and Marine bronze. D-34 Fast, easy 1/4 turn bayonet coupling Ergonomically designed for use with arctic gloves High Shock and Vibration Resistant Compatible with all Series ITS 5015 type connector shell sizes Durable chemical-resistant material Colored materials facilitate connector and cable identification and/or connector phases © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 SERIES ITS-RG RadGrip™ Easy-Mate Rubber Covered Coupling Nut Connectors Straight and 90° Plugs How To Order ITS Sample Part Number Product Series Grounding Fingers Contact Type 90° right-angle plug with RGG cable gland G 31 06 RGG 20-27 P Y BK Reverse-Bayonet Coupling Connector G = Grounding Fingers Omit for Standard 31 = Solder 41 = Crimp Shell Style Connector/Backshell Class Shell Size/Insert Arrangement Contact Gender Alternate Insert Rotation Color Code 06 = Straight Plug with Accessory Threads 08 = Plug with 90° Backshell RGG = Plug, environmental with rubber-covered coupling nut and cable gland RRG = Plug, environmental with rubber-covered coupling nut and rubber-covered EMI/RFI cable sealing backshell See Catalog P = Pin S = Socket Omit for Normal BK = Black RD = Red YL = Yellow BL = Blue OR = Orange LG = Light Green GY = Grey Straight plug with optional strain relief clamp. Consult factory for additional backshell options in the ITS-RG series Fil. F Q1 ØB OQ O Q1 L L ITS-RGG (06) Straight Plug O Q1 OQ L Q ITS-RRG (06) Straight Plug with EMI/RFI Cable Sealing Backshell Q1 Q U L U Fil. F ITS-RGG (08) 90° Right-Angle Plug ØB ITS-RRG (08) 90° Right-Angle Plug with EMI/RFI Cable Sealing Backshell D-35 © 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Geo-Marine® Custom Applications Why Choose GLENAIR? O Custuo tstandin mer S g ervice ! rials! w Mate ty of Ra Plen sembly! In-House As Abundant Machining Capacity! D Huge “ © 2014 Glenair, Inc. Same- Day” In Series 22 Geo-Marine® ventoU.S. ry!CAGE Code 06324 GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • www.glenair.com D-36 One oPrinted f NoinrtU.S.A. h America's a n d Machining FAX 818-500-9912 E-Mail: [email protected] State-of-the-A rt Plating Cap Injection n o i t c u d o High-Pring Equipment Mold abilities xperienced The Industry's Most Eng Specialists eldi EMI/RFI Braided Shi Largest CNC Installations Milling d Printed n a y a r r A r e s for Filt Clean Room cuit Board Assembly Cir Out of This World INTERCONNECT SOLUTIONS Glenair, Inc. 1211 Air Way • Glendale, California • 91201-2497 Telephone: 818-247-6000 • Fax: 818-500-9912 • [email protected] www.glenair.com Glenair Power Products Group 860 N. Main Street Extension Wallingford, CT 06492 Glenair Microway Systems 7000 North Lawndale Avenue Lincolnwood, IL 60712 Glenair Electric GmbH Schaberweg 28 61348 Bad Homburg Germany Glenair Italia S.p.A. Via Del Lavoro, 7 40057 Quarto Inferiore – Granarolo dell’Emilia Bologna, Italy © 2014 Glenair, Inc. Telephone: 203-741-1115 Facsimile: 203-741-0053 [email protected] Glenair UK Ltd 40 Lower Oakham Way Oakham Business Park P.O. Box 37, Mansfield Notts, NG18 5BY England Telephone: +44-1623-638100 Facsimile: +44-1623-638111 [email protected] Telephone: 847-679-8833 Facsimile: 847-679-8849 Glenair Nordic AB Gustav III : S Boulevard 46 S - 169 27 Solna Sweden Telephone: +46-8-50550000 Facsimile: +46-8-50550001 [email protected] Telephone: 06172 / 68 16 0 Facsimile: 06172 / 68 16 90 [email protected] Telephone: +39-051-782811 Facsimile: +39-051-782259 [email protected] Printed in U.S.A. Glenair Iberica C/ La Vega, 16 45612 Velada Spain Glenair France SARL 7, Avenue Parmentier Immeuble Central Parc #2 31200 Toulouse France Telephone: +34-925-89-29-88 Facsimile: +34-925-89-29-87 [email protected] Telephone: +33-5-34-40-97-40 Facsimile: +33-5-61-47-86-10 [email protected] SERIES 2 2 GEO -MARINE ® CONNECTOR S AND CABL ES