Technical Data Glenair Series ITS and ITS-RG MIL-DTL-5015 Type Reverse Bayonet Connectors Panel Cut-Out Mounting Data A A max Maximum Panel Thickness Panel thickness for type 00, 02 connectors used for rear mounting 16S 14S 18 20 22 24 Shell size 10SL 16 A 3.7 3.7 3.7 3.7 3.7 3.7 5.25 28 32 36 40 5.25 6.1 6.1 6 Panel 02 connectors for rear mounting Panel thickness thickness for for type type 00, 02PP, 03, 030 and used 038 connectors (with threaded holes) 16S 16S 14S 18 20 22 24 28 32 14S 18 20 22 24 28 32 Shell 10SL 16 Shell size size 10SL 16 A 3.7 3.7 3.7 3.7 3.7 3.7 5.25 5.25 6.1 A 7.2 7.2 7.2 7.5 7.5 7.5 7.5 7.5 7.5 36 36 6.1 7.5 40 40 6 7.5 To be threaded used for plugs with recovered coupling nuts Panel thickness for type 02PP, 03, 030 and 038 connectors. (with holes) 16S 14S 18 20 22 24 28 32 36 40 Shell size 10SL 16 3.2 A 3.2 3.2 3.2 3.2 3.2 3.2 2,5 2,5 2,5 3.2 Platings In accordance with RoHS Requirements F2 F6 F7 F11 Not In accordance with RoHS MT F8 G3 Electrolytic Nickel Black non conductive Black conductive Electroless Nickel Nickel PTFE Zinc Cobalt with Olive drab passivation Cadmium with Olive drab passivation Thermal shock -40°C to 100°C -55°C to 125°C -55°C + 125°C -55°C to 125°C -65°C to 175°C -40°C to 100°C -55°C to 125°C Salt spray after thermal shock 24 h 500 h 500 h 48 h 1000 h 200 h YES NO YES YES YES YES Electrical conductivity © 2010 Glenair, Inc. U.S. CAGE Code 06324 96 h YES Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-26 Technical Data Glenair Series ITS and ITS-RG MIL-DTL-5015 Type Reverse Bayonet Connectors Panel Cut-Out Mounting Data Panel Cutout OT B Ø OC Ø = = qR R A OA ØA Panel cutout for type 00, 02, 26 connectors (front panel mounting) 16S 14S 18 20 22 24 Shell size 10SL 16 ØC 17 20 23 26.5 30.0 33 36 R ±0.1 18.2 23 24.6 27 29.4 31.8 34.9 ØT 3.4 3.4 3.4 3.4 3.4 3.4 3.9 Panel cutout for type 02PP, 03, 030 connectors (rear panel mounting) 16S 14S 18 20 22 24 Shell size 10SL 16 ØC 19.1 25.5 28.3 31.7 35.0 38.3 41.8 R ±0.1 18.2 23 24.6 27 29.4 31.8 34.9 ØT 4.5 4.5 4.5 4.5 4.5 4.5 4.5 Panel cutout for type 07, 070, 078 connectors (jam nut receptacles) 16S 14S 18 20 22 24 Shell size 10SL 16 ØA +0.25 22.4 28.75 31.95 35.1 38.30 41.45 44.65 B -0.35 21 27.4 30.95 33.75 36.85 40.05 43.35 © 2010 Glenair, Inc. U.S. CAGE Code 06324 28 32 36 40 42 39.7 3.9 48.5 44.5 4.5 55 49.2 4.5 61 55.5 4.5 28 32 36 40 47.6 39.7 5.5 54.3 44.5 5.5 60.5 49.2 5.5 66.4 55.5 5.5 28 32 36 40 51 49.55 57.35 55.95 63.7 62.35 70.05 68.55 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] A-27 www.glenair.com