OPTO-ELECTRONIC INTERCONNECT SOLUTIONS

S M A L L FORM -FACT OR
OPTO-ELECTRONIC
INTERCONNECT SOLUTIONS
F O R H A R S H - E N V I R O N M E N T E T H E R N E T, V I D E O , H I G H - S P E E D DATA , A N D S I G N A L AG G R E G AT I O N
MAY 2014
ETHERNET, VIDEO,
AND HIGH-SPEED
DATA NETWORKING
OPTO-ELECTRONIC
INTERCONNECT SOLUTIONS
For size and weight savings in avionics,
naval, ground tactical equipment, oil and gas,
industrial, mining, in-flight entertainment, and
other harsh application environments
T
he need for reduced weight and small form-factor components,
particularly in airframe and other high-performance
environments, has led Glenair to develop a revolutionary new
opto-electronic product series that incorporates transmitter
and receiver functions, fiber-to-copper media conversion, and
signal aggregation directly into interconnect wiring systems.
These harsh-environment interconnect technologies reduce size
and weight, and improve the performance of Ethernet, Video and High-Speed
Digital applications—by leveraging the strengths of both electrical and optical
media. Glenair offers both standard catalog solutions, as well as the integration
of electronics or opto-electronics into rugged custom packages and cable
assemblies per customer and application requirements.
Glenair, Inc.
1211 Air Way
Glendale, CA
91201-2497
818-247-6000
[email protected]
www.glenair.com
SMALL FORM-FACTOR • HARSH-ENVIRONMENT
Opto-Electronic Interconnect Solutions for Ethernet,
Video, High-Speed Data, and Signal Aggregation
Digital Opto-Electronic Transceivers, Transmitters and Receivers
Size #8 Cavity Opto-Electronic Transmitter and Receiver Contacts
1.25 mm ARINC 801, 2.5 mm ELIO®, and 1.25 mm LuxCis® integrated solutions
(patent pending)
Board-Mount Transceivers, Transmitters and Receivers
Surface-mount opto-electronic interconnect/board assemblies for rugged vibration and shock
applications
Opto-Electronic Connectors and Modules
Series 80 Mighty Mouse and MIL-DTL-38999 type connectors and accessories with integrated
transmitters and receivers
(patent pending)
Copper-to-Fiber Media Converters
Ethernet Media Converters
Electrical/fiber optic Ethernet Media Converters
Video Media Converters
Electrical/fiber optic Video Media Converters
Signal Aggregator Systems
Multiple signal type aggregation to high datarate fiber optics
Ethernet Switches
Ethernet Switches
5- and 7-Port Unmanaged Ethernet Switches and breakout cables
1
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
HARSH-ENVIRONMENT
Opto-Electronic
Interconnect Solutions
Unlock the huge bandwidth of optical fiber
and dramatically reduce the size and weight of
interconnect systems
Glenair leverages its extensive portfolio of military and aerospace interconnect
products to bring you ruggedized opto-electronic solutions, converting signals
between the electrical domain and the fiber domain. These opto-electronic products
are designed for harsh military/aerospace system and subsystem environments and
will operate reliably over very wide temperature ranges and high shock and vibration
conditions; they have been optimized to minimize size, weight and power and offer
electrical-to-fiber conversion for Ethernet, video, signal aggregation and high-speed
digital signals.
Glenair also offers integration of electronics or opto-electronics into
rugged connector packages and cable assemblies per specific
customer requirements. We offer rapid response in-house
electrical/PCB design, and mechanical connector/backshell
engineering from our vertically intergrated
factory. Our product portfolio is constantly
evolving. Please contact Glenair for the
latest developments, or custom solutions.
2
Technology can be
integrated into milstandard connectors or
ruggedized packaging to
suit any application
ADVANTAGES OF GLENAIR
OPTO-ELECTRONICS
„„
Reduced size, weight, and
power consumption
„„
Leverages the virtues of
fiber optics: EMI immunity,
network security, increased
transmission distance
„„
Advanced management
and control features
„„
High shock and vibration
to support mil/aero
applications
„„
Wide operating
temperature range: -40°C
to +85°C and beyond
„„
Designed IAW military and
aviation requirements:
MIL-STD-883, MIL-STD-461,
DO-160 and others
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
SERIES 050 OVERVIEW
Harsh-Environment, Small Form-Factor
Opto-Electronic Interconnect Solutions
10Gbps at -65°C
10Gbps at +100°C
PROVEN-PERFORMANCE OPTO-ELECTRONIC INTERCONNECT SOLUTIONS
„„
Military, industry-standard and custom connector integration
„„
Custom aggregation media converters
„„
Integration of active
components into cable
assemblies
„„
Link testing and
qualification
Laboratory link test and qualification
data for harsh-environment optoelectronic solutions are available—
just contact the factory
SMPTE 3G – SDI at -40°C
Pathological Case 3
3
SMPTE 3G – SDI at +90°C
Pathological Case 3
For more information
contact Glenair at
818-247-6000 or
visit our website at
www.glenair.com
U.S. CAGE code 06324
SIZE 8 CAVITY
Opto-Electronic Contacts
Size 8 Cavity Opto-electronic contacts transmit and receive differential CML or LVPECL
electrical signals over Multimode fiber optic cable. Transmitters consist of a laser driver
or LED driver with a temperature compensation circuit to maintain optical power over
the entire operating temperature range, and a 850nm VCSEL laser or a 1300nm LED.
Receivers consist of a PIN Photo Detector, a Transimpedance Amplifier with automatic
gain control circuit, and a Limiting Amplifier. Differential output data signals are
LVPECL or CML compatible. The transmitter has a Tx Disable pin to turn off transmitter
output.
„„
Link distances up to 550
meters, multimode
„„
Wave-solderable
termination with RoHScompliant solders
„„
Transmit (Tx) and Receive
(Rx) Opto-electronic
contacts for use in
ARINC 600 and other
size #8 cavity equipped
connectors
4
„„
ARINC 664, 801, 803,
804 and 818 standard
compliant
„„
Single, 3.3 V power supply
(patent pending)
„„
Current offerings include
1.25mm ARINC 801 and
2.5mm ELIO® solutions
„„
Fast and Gigabit Ethernet,
DVI, HDMI video capable
transmitter and receiverequipped contacts
4.25 Gbps / +25°C
Evaluation Test Boards Available
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Size 8 Cavity Opto-Electronic Transmitter and
Receiver Contacts for Ethernet, Video and
High-Speed Data
PRODUCT SELECTION GUIDE
visit glenair.com for detailed product datasheets
TRANSMITTER AND RECEIVER CONTACTS, 850nm LASER, ARINC 801 1.25mm TERMINUS
Size 8 Cavity Opto-electronic contacts transmit
and receive differential CML electrical signals over
Multimode fiber optic cable. Transmitters consist
of
a laser driver with a temperature compensation
050-301
(patent pending) circuit to maintain optical power over the entire
operating temperature range, and a 850nm VCSEL laser. Receivers
consist of an 850nm PIN Photo Detector, a Transimpedance Amplifier
with automatic gain control circuit, and a Limiting Amplifier.
Differential output data signals are CML compatible. The transmitter
has a Tx Disable pin to turn off transmitter output and a Tx Fault pin to
signal a fault condition. Receiver includes a CMOS compatible Loss of
Signal Indicator to prevent invalid data.
Opto-Electronic
Converter
Optical Device Type
T = Optical Transmitter
R = Optical Receiver
050 - 301 - 01 - R
Opto-Electronic
Series
Signal Type
-01 = 1.25 Gbps
-03 = 3.20 Gbps
-02 = 2.50 Gbps
-04 = 4.25 Gbps
TRANSMITTER AND RECEIVER CONTACTS, 850nm LASER, ELIO® 2.5mm TERMINUS
Size 8 Cavity Opto-electronic contacts transmit
and receive differential CML electrical signals
over Multimode fiber optic cable. Transmitters
consist of a laser driver with a temperature
050-307
compensation circuit to maintain optical power
(patent pending)
over the entire operating temperature range, and a
850nm VCSEL laser. Receivers consist of an 850nm PIN Photo Detector,
a Transimpedance Amplifier with automatic gain control circuit,
and a Limiting Amplifier. Differential output data signals are CML
compatible. The transmitter has a Tx Disable pin to turn off transmitter
output and a Tx Fault pin to signal a fault condition. Receiver includes
a CMOS compatible Loss of Signal Indicator to prevent invalid data.
Opto-Electronic
Converter
Optical Device Type
T = Optical Transmitter
R = Optical Receiver
050 - 307 - 01 - R
Opto-Electronic
Series
Signal Type
-01 = 1.25 Gbps
-03 = 3.20 Gbps
-02 = 2.50 Gbps
-04 = 4.25 Gbps
TRANSMITTER AND RECEIVER CONTACTS, 1300 nm LED, ARINC 801 1.25mm TERMINUS
Size 8 Cavity Opto-electronic contacts transmit and
receive differential LVPECL electrical signals over
Multimode fiber optic cable. Transmitters consist
of an LED driver with a temperature compensation
050-308
(patent pending) circuit to maintain optical power over the entire
operating temperature range, and a 1300nm
LED. Receivers consist of a PIN Photo Detector, a Transimpedance
Amplifier with automatic gain control circuit, and a Limiting
Amplifier. Differential output data signals are LVPECL. The transmitter
has a Tx Disable pin to turn off transmitter output.
Opto-Electronic
Converter
Optical Device Type
T = Optical Transmitter
R = Optical Receiver
050 - 308 - 01 - R
Opto-Electronic
Series
Signal Type
-01 = 100 Mbps
OPTO-ELECTRONIC CONTACT EVALUATION BOARD
The evaluation board is designed as an interface to allow
evaluation of the size 8 transmitters or receivers. Devices
are powered through the 3.3V and GND connections.
For the transmitter fault pin can be monitored and the
050-301
transmitter disable can be controlled via an external
voltage supply. For the receiver, loss of signal (LOS) state can be monitored.
5
Test configuration options:
„„
Transmitter only
„„
Receiver only, and
„„
Both transmitter and receiver either in a single link
or two separate links.
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
HIGH-SHOCK, HIGH-VIBRATION
PCB-Mount Opto-Electronics
Connectorized, high-density, board-mount
transceivers built for rugged vibration and
shock applications up to 10Gbps
„„
Smallest footprint available
„„
Passed jet fighter and space
launch shock and vibration
testing
„„
No soldering required
Glenair PCB mount transceivers are ruggedized harsh-environment equivalents to SFP „„
CML 100 Ohm differential
transceivers but with mechanical design suited to the harsh temperature and vibration
input and output
environments found in Military and Aerospace applications. PCB mount optical
„„
-40°C to +85°C operating
transceivers support optional Digital Monitoring Interface (DMI) features in accordance
temperature range—
with SFF 8472. The Transceiver is comprised of a transmitter section and a receiver
extended temperature
section that reside on a common package and interface with a host board through a
ranges available
high-speed electrical connector.
GC fiber optic connector
retained with mounting
screws to withstand high
vibration and shock
6
PCB-mount optoDual-transceiver,
electronics feature Samtec
Quad-Transmitter and
high-speed surface-mount Quad-Receiver form factor
connectors
with ARINC 801 contacts
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Evaluation boards for all
PCB mount transceiver
configurations are
available
Harsh-Environment PCB-Mount Transceivers,
Transmitters and Receivers
PRODUCT SELECTION GUIDE
visit glenair.com for detailed product datasheets
General Purpose Applications:
High-Speed Digital balanced signals (i.e. 4B/5B, 8B/10B, 62B/64B etc)
Fast Ethernet, Gigabit Ethernet, 10G Ethernet Fiber Channel (1X, 2X, 4X, 8X), ARINC 818, AFDX, SFPDP, Serial Rapid I/O (sRIO)
Video Applications
ser
Typ
mb
e
er
Nu
o
mb f Tra
n
Nu er of smit
te
mb Re
er ceiv rs
of
e
Fib rs
Fib
er
er
Typ s
Ge
e
Vid ner
eo al P
Vid (DVI urpo
se
eo , A
Vid SMP RINC
8
eo
TE
SM HD 18)
PT
-SD
E3
G-S I
DI
Dis
tan
ce
Nu
La
(nm
)
ng
th
ps
)
Da
ta
Wa
ve
le
Ra
te
(Gb
ion
ipt
scr
De
Pa
rt
Nu
mb
e
r
DVI, ARINC 818, SMPTE (SDI, HD-SDI, 3G-SDI)
050-315
050-316
050-317
050-318
050-319
050-320
050-321
050-322
050-324
050-325
050-326
050-327
050-328
050-331
050-332
050-333
050-336
050-337
050-339
050-340
050-341
050-342
050-343
Part No.
050-329
050-330
050-334
050-338
050-344
PCB Mount OE Transceiver 5G, MMF
PCB Mount OE Dual-Transmitter 5G, MMF
PCB Mount OE Dual-Receiver 5G, MMF
PCB Mount OE Transceiver, 4G, SMF
PCB Mount OE Dual Transmitter, 1310nm FP, 4G, SMF
PCB Mount OE Dual Receiver, 1310nm, 4G, SMF
PCB Mount OE Transceiver, 1300nm LED, 200M, MMF
PCB mount 10Gbps XVR, 1310nm FP, 2km, SMF
PCB Mount OE Transceiver, 1310nm DFB, 4G, SMF
PCB Mount OE Dual Transmitter, 1310nm DFB, 4G, SMF
PCB Mount OE Dual Receiver, 1310nm DFB, 4G, SMF
PCB mount 10Gbps SR Serial XVR, 850nm, MMF
PCB mount 10Gbps XVR, 1310nm DFB, 10km
PCB Mount OE Dual-Transmitter SMPTE 3G-SDI
PCB Mount OE Dual-Receiver SMPTE 3G-SDI
PCB Mount OE Dual-Transceiver 5G MMF, ARINC 801
PCB Mount OE Quad-Transmitter 5G MMF, ARINC 801
PCB Mount OE Quad-Receiver 5G MMF, ARINC 801
PCB Mount OE Dual-Transceiver, 10G MMF, ARINC 801
SINGLE FIBER Bidirectional Transceiver, 2.5G, SMF
SINGLE FIBER Bidirectional Transceiver, 10G, SMF
CWDM Transceiver, 2.5G, SMF
CWDM Transceiver, 10G, SMF
0.1–5
0.1–5
0.1–5
0.1–4.25
0.1–4.25
0.1–4.25
0.05–.2
5–10.5
0.1–4.25
0.1–4.25
0.1–4.25
5–10.5
5–10.5
2.97
2.97
0.1–5
0.1–5
0.1–5
0.1–5
0.1–2.5
5–10.5
0.1–2.5
5–10.5
850
VCSEL 1
850
VCSEL 2
850
N/A
0
1310
FP
1
1310
FP
2
1310
N/A
0
1300
LED
1
1310
FP
1
1310
DFB
1
1310
DFB
2
1310
N/A
0
850
VCSEL 1
1310
DFB
1
850
VCSEL 2
850
N/A
0
850
VCSEL 2
850
VCSEL 4
850
N/A
0
850
VCSEL 2
1310/ 1550 FP/FP
1
1310/ 1550 DFB/DFB 1
CWDM
DFB
1
CWDM
DFB
1
1
0
2
1
0
2
1
1
1
0
2
1
1
0
2
2
0
4
2
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4
4
4
4
1
1
2
2
MMF
MMF
MMF
SMF
SMF
SMF
MMF
SMF
SMF
SMF
SMF
MMF
SMF
MMF
MMF
MMF
MMF
MMF
MMF
SMF
SMF
SMF
SMF
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
Y
Y
N
N
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
N
N
N
N
N
N
N
N
1m-500m
1m-500m
1m-500m
1m-10km
1m-10km
1m-10km
2km
1m-2km
1m-40km
1m-40km
1m-40km
1m-400m
1m-10km
1m-1km
1m-1km
1m-500m
1m-500m
1m-500m
1m-400m
1m-2km
1m-10km
1m-20km
1m-10km
Evaluation Boards
Description
for testing Part Number(s)
EVALUATION BOARD supporting Board Mount Transceivers, 1-10Gbps
050-315, 050-318, 050-321, 050-324
EVALUATION BOARD supporting Board Mount Dual Transmitters and
050-316, 050-317, 050-319, 050-320, 050-325, 050-326, 050-331, 050-332
Board Mount dual Receivers
EVALUATION BOARD supporting PCB Mount Dual-Transceiver 050-333+ 050-333
EVALUATION BOARD
050-336, 050-337
FMC Connectivity Card
All Glenair PCB Mount Components
Accessories
Part No.
Description
FA02454 Fiber Optic jumper cable, GC
FA03286 Fiber Optic jumper cable, ARINC 801
059-0007 PCB Threaded Insert
7
Details
Singlemode or multimode connects transceiver to mil/aero connector
Singlemode or multimode connects transceiver to mil/aero connector
Simplifies installation of PCB transceivers
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
SMALL FORM-FACTOR • HARSH-ENVIRONMENT
Opto-Electronic Connectors
Environmentally sealed, triple-start
connectors housing turnkey copper-tofiber transceiver technology
Glenair is able to offer our Opto-Electronic solutions customers turnkey multichannel
receptacle connectors housing integrated transceiver technology for fast/gigabit
Ethernet, DVI and HDMI video, as well as various high-speed data transfer protocols.
The two available connector designs incorporate Glenair small form-factor optoelectronic contacts (050-301) or an ELIO® equipped configuration that intermates with
the standard ELIO®2.5mm fiber optic terminus (050-307). Receptacles are populated
with factory-tested size #8 contacts, and are ready for immediate use as fiber-optic-toelectrical circuit board I/O connectors. Special size #8 cavity adapters are also available
to enable construction of compatible plug connectors on the cable side.
Special size #8 cavity adapters
facilitate construction of
standard fiber optic plug
connectors that intermate with
the size #8 opto-electronic
transceiver contacts
„„
Catalog solutions include:
2.5mm ELIO® solution
for multimode Ethernet,
video, and high-speed
data applications
1.25mm ARINC 801
multimode fiber optic
termini solution for
Ethernet, video, and highspeed data
„„
Made-to-order
configurations with a
wide range of connector
packages including
Glenair Series 80 Mighty
Mouse
Opto-electronic receptacle
connectors are populated with
size #8 contacts, and ready for
immediate assembly in I/O to
circuit board applications
ELIO® is a registered trademark of SOURIAU
8
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Opto-Electronic Connectors for Ethernet, Video,
and High-Speed Data Applications
PRODUCT SELECTION GUIDE
visit glenair.com for detailed product datasheets
Part No.
Description
050-304
050-304 MIL-DTL-38999 Series III Type Receptacle Connectors with
Size 8 Opto-Electronic Contacts
The 050-304 series of Active Opto-electronic sealed panel mount connectors
offers customers the power to convert from electrical to fiber optic signals
within a D38999 connector to support high speed fiber optic transmission in
harsh environments. The 050-304 incorporates size 8 active contacts in one of
three standard configurations to enable optical Transmitters, optical Receivers
or Optical Transceivers, or custom configurations.
059-0001
059-0001 Size 8 cavity adapter kit for 1.25mm ARINC 801 terminus
Size 8 cavity adapter will convert D38999 size 8 cavities (Twinax, Coax, Quadrax
or power) into ARINC 801 fiber optic cavities. Kit includes the adapter and an
ARINC 801 terminus.
059-0002
059-0002 Size 8 cavity adapter for ELIO® 2.5mm terminus
Size 8 cavity adapter will convert D38999 size 8 cavities (Twinax, Coax, Quadrax
or power) into ELIO® fiber optic cavities per EN4531.
050-313
050-313 Opto-Electronic Transceiver, MIL-DTL-38999 Type 2.5mm ELIO®
Compatible, 100Mbps – 4.25Gbps
Glenair 050-313 is a D38999 Type 11-02 receptacle connector incorporating
an opto-electronic transceiver operating from 100Mbps to convert electrical
signals to multimode fiber. The Glenair optical transceiver is ideal for harshenvironment, extreme shock, vibration and temperature avionics and military
applications where copper cable link distance, bandwidth, weight or bulk make
the use of twisted pair, Twinax or Quadrax copper conductors unacceptable.
050-303
050-303 Opto-Electronic Receiver with Mighty Mouse connectors,
100Mbps – 2.5 Gbps
Glenair 050-303 optical transceiver, connectorized with Series 805 Mighty
Mouse connectors, employs state-of-the-art opto-electro-mechanical
technology to provide effective harsh environment fiber-optic interconnect
solutions for high-speed digital data.
(patent pending)
9
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Subsea Factory Floor image
© 2014 Aker Solutions
ETHERNET
Copper-to-Fiber
Media Converters
Reduced form-factors for harshenvironment applications
Glenair offers turnkey harsh-environment media converters for in-line and select panel
mount applications. The devices facilitate conversion of 10/100/1000BASE-SX/LX fiber
optic gigabit Ethernet data streams to electrical signals servicing switches, routers,
and other peripherals. Designed for use in ruggedized applications
such as geophysical, naval, commercial and military aerospace,
these reduced form-factor electrical-to-optical transceivers
deliver proven performance with significant size and
weight savings compared to conventional form-factor
technologies. Available for a wide range of fiber optic
formats, including 1.25mm, 1.57mm, 2.0mm, and 2.5mm
ferrules, in both singlemode and multimode, Glenair’s
complete range of media converters meets virtually every
fiber-optic-to-copper application requirement.
10
„„
Reduced form-factor
devices for in-line
conversion of electrical and
optical signals
„„
Active cable versions that
reduce the risk of damage
to fiber optic interfaces
„„
Weight-saving technology
that incorporates power
and signal conversion
functions
„„
Auto-negotiation
10/100/1000BASE-T to
100BASE-FX, 1000BASE-SX
and 1000BASE-LX
„„
Advanced monitor & control
functions via serial interface
to facilitate network
management and BIT
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Copper-to-Fiber Media Converters
for Ethernet Applications
PRODUCT SELECTION GUIDE
visit glenair.com for detailed product datasheets
EXAMPLE FUNCTIONAL BLOCK DIAGRAM FOR GLENAIR 050-105 ETHERNET MEDIA CONVERTER
Ø.128±.010
1.156
J1
J3
1.156
C MAX
E MAX
J2
3.000
050-105
10/100/1000BASE-T to
1000BASE-SX/LX Media
Converter
A MAX
Fiber Optic
SX or LX
Code
-SX
-LX10
11
D MAX
1.000
B MAX
Table I: Signal Protocol
Name
Medium
1000BASE-SX
Multimode Fiber
1000BASE-LX10
Singlemode Fiber
Part No.
Description
050-101
1000BASE-T to 1000BASE-SX/
LX Media Converter
J1
O/E
Rx
Ethernet
PHY &
SERDES
J3
Regulator
J2
10/100/1000BASE-T
Tx
Power, 28VDC
(5-36V)
Part No.
Description
050-112
10/100/1000BASE-T to SX,
LX10, or FX Fiber Optic
Ethernet, GFOCA Fiber Optic
interface
050-103
10/100/1000BASE-T to
1000BASE-SX/LX Media
Converter with Mighty Mouse
Connectors
050-113
10/100/1000BASE-T to SX,
LX10, or FX Fiber Optic
Ethernet, MIL-DTL-1560
interface
050-104
10/100/1000BASE-T to
1000BASE-SX/LX Active
Cable with Mighty Mouse
Connectors
050-115
10/100/1000BASE-T to
1000BASE CWDM Media
Converter
050-110
10/100/1000BASE-T to
1000BASE-SX/LX, GFOCA,
38999 Quadrax (signal and
BIT), 38999 (Power)
050-117
LRU Media Converter,
Single or Dual Channel,
10/100/1000BASE-T to SX/LX
Lightning Strike Protection
DO160 level 3
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
VIDEO
Copper-to-Fiber
Media Converters
Reduced form factor media converters
for harsh-environment video
applications
„„
Fiber Link 500m with MMF
„„
Fiber Link 10km with SMF
„„
38999 with MIL-STD-1560
and custom contact
arrangements—including
quadrax and coaxial
contact options
„„
Mighty Mouse electrical
and fiber optic connectors
„„
Fiber Optic connectors
including D38999,
M28876, GHD, NGCON
(M64266), HMA (M83526),
Glenair Copper-to-Fiber-Optic Video Media Converters enable extended link distances,
and GFOCA
improved EMI and security in harsh environments
and provide solutions for both MMF and SMF
applications. These media converters support
ruggedized military systems applications and are
tailored to support a variety of Video protocols
including DVI, HDMI, SMPTE (SDI, HD-SDI and
3G-SDI), ARINC 818 and more.
Many options for mil-spec and military-grade
electrical and fiber optic connectors are
available. Contact Glenair for custom configurations,
application-specific designs and engineering services.
12
„„
Power supply functions
with wide input-voltage
ranges
„„
DVI, HDMI, SMPTE,
ARINC 818
„„
Advanced monitor & control
functions via serial interface
to facilitate network
management and BIT
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Copper-to-Fiber Media Converters
for Video Applications
PRODUCT SELECTION GUIDE
visit glenair.com for detailed product datasheets
MIL-DTL-38999 SERIES III TYPE DVI VIDEO MEDIA CONVERTER
How To Order
Product
Series
Transmitter = TX
Receiver = RX
ENVIRONMENTAL
PERFORMANCE
Dash Number
050 - 201 - TX NF - 01
DVI Media Converter
(See Table)
Plating Code
Video Media Converter Selection Guide
050-201
DVI Copper-to-Fiber Media Converter
050-203
DVI Copper-to-4-Fiber, VCSEL, DO160 Lightning Strike level 3 and
“dirty” 28V power
„„
-40°C to +85°C operating
temperature range
„„
Meets MIL-STD-810
Mechanical Shock and
Vibration
050-206 DVI Copper-to-Fiber Media Converter
050-207
4 Channel SMPTE HD-SDI & 3G-SDI Transmitter or Receiver
050-204
4 Channel 3G-SDI MMF TX and 3G-SDI MMF RX, GHD Fiber,
Mighty Mouse (Coax and Power).
050-205
DVI Copper-to-Fiber Media Converter, Inline
„„
Meets MIL-STD-1344
immersion resistance
VIDEO MEDIA CONVERTER FUNCTIONAL BLOCK DIAGRAM
Graphics
TMDS - Red
Card
Source TMDS - Green
TMDS - Blue
TMDS - Data/Clock
18-36V
TRANSMITTER
RECEIVER
Lasers x 4
PIN/TIA x 4
TMDS - Red
Laser
Drivers
Limiting
Amplifiers
Regulation
Regulation
TMDS - Green
Monitor
TMDS - Blue
TMDS - Data/Clock
18-36V
Fiber optic Cable
R,G,B, Clock
R,G,B, Clock
up to 500m MMF
up to 10km SMF
Power
Power
050-201-TX
13
050-201-RX
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Rev. 10.24.14
SIGNAL AGGREGATION
Copper-to-Fiber
Media Converters
Low data-rate signal multiplexing
copper-to-fiber media conversion
Glenair signal aggregation media converters integrate a set
of compact opto-electronic modules to digitize and/
or aggregate multiple common signal types, and
combine them onto high-data-rate serial optical
fiber channels. Silicon field-programmable gate
array (FPGA) technology provides a flexible way to
accommodate many signal I/O types.
Signal Aggregation Media Converter Selection Guide
050-501 12-Channel RS422 Copper-to-Fiber Media Converter
050-502 6x RS-422 and 6x ARINC 429 Copper-to-Fiber Media Converter
050-503 DVI/HDMI (Dual fiber) + USB(HID) interface (KVM) Copper-to-Fiber Media Converter
CAN Bus “bridge”(ARINC 825), ARINC 429, ARINC 664 (AFDX ethernet) DO-160 compliant
050-504
Copper-to-Fiber Media Covnerter
2x Ethernet, 2xRS-422 or 2xRS-232 (422 & 232 not simultaneously)
050-505
Copper-to-Fiber Media Converter
14
„„
Dramatically reduce size,
weight, wire count, and
shielding of copper cables
„„
Leverage the high
bandwidth of optical fiber
by multiplexing many lowerdata-rate signals onto a few
fibers
„„
One high-speed optoelectronic interface can serve
practically all signal types
„„
Ideal soluion to enable
optical rotary joints
„„
-40°C to +85°C operating
temperature range
„„
Meets MIL-STD-810
Mechanical Shock and
Vibration
„„
Meets MIL-STD-1344
immersion resistance
„„
Advanced monitor &
control functions via serial
interface to facilitate network
management and BIT
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Copper-to-Fiber Media Converters
Multiplexing Signal Aggregator
PRODUCT SELECTION GUIDE
visit glenair.com for detailed product datasheets
SIGNAL AGGREGATOR FUNCTIONAL DIAGRAMS
„„
One compact LRU
digitizes or aggregates
multiple electrical signals
on copper using an FPGA
„„
FPGA digitizes and
serializes the signals onto
a high-speed data stream
I/O 1
I/O signal:
Digital, analog,
video, data
„„
Opto-electronic
converters get the
serialized signals on and
off the optical fiber
•
•
•
1 - 10 GB/sec
fiber-optic
single link
Serialize/
DeSerialize
FO
Rx
A/D
I/O N
Power
Signal Aggregation
Media Converter
FO
Tx
FPGA
Aggregate,
Packetize
I/O 2
Bonded links
up to 40Gbps
Or bi-di single-fiber
link for slip-ring
applications
Regulator
Signal Aggregation
Media Converter
2 Fiber Optical Solution
FO Tx
FO Rx
FO Rx
FO Tx
many signals
on copper
many signals
on copper
Single Optical Fiber Solution
Signal Aggregation
Media Converter
Signal Aggregation
Media Converter
1310 nm
Tx
Tx
1550 nm
Rx
many signals
on copper
Enables single-port
optical rotary joint
Rx
many signals
on copper
FPGA MAIN BOARD AND DAUGHTER CARD ARCHITECTURE CAN HANDLE MANY SIGNAL TYPES
FPGA Main Board
Unique signal-type
Daughter Card
15
SERIAL
„„
RS422/RS485
„„
RS232
„„
USB
„„
MIL-STD-1553
„„
CAN Bus
„„
ARINC 429
„„
SMBus
„„
I2C
„„
SPI
„„
Ethernet 10/100/1000
VIDEO
ANALOG
„„
DVI
„„
RF/IF Sampling
„„
HDMI
„„
Analog Sensor Data
„„
SMPTE SDI
„„
SMPTE HD-SDI
„„
SMPTE 3G-SDI
„„
ARINC 818
„„
VGA
Contact the factory for other signal formats
and custom configurations
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
SMALL FORM-FACTOR
Ethernet Switches
and Breakout
Cables
Glenair unmanaged Ethernet switches are layer 2 switches with Auto negotiation and
Auto MDI / MDIX circuitry that enables port expansion with IEEE-802.3U
10/100/1000Base-T Ethernet ports. Developed for use in
harsh environment applications, the electronics
are incorporated into a panel-mountable
housing that is sealed against liquid and
solid contaminants and designed for shock
and vibration resistance. Standard connector
interfaces include high-performance size- and
weight-saving Glenair Series 805 Mighty Mouse
jam nut receptacles and M28876 type fiberoptic connectors.
16
„„
Unmanaged—plug and
play operation—no
configuration required
„„
Jumbo frame support in
all speeds (10/100/1000
Mbps)
„„
Operating temperature
range: -40°C to +85°C
„„
Standard ultraminiature
Mighty Mouse electrical
and M28876 type fiber
optic connector interfaces
„„
Experienced optoelectronic engineering
services available for
special connector and
form-factor configurations
„„
Breakout cables with
industry-standard
connector interfaces
available
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Small Form-Factor Ethernet Switches
and Breakout Cables
PRODUCT SELECTION GUIDE
visit glenair.com for detailed product datasheets
052-101 7-PORT UNMANAGED ETHERNET SWITCH
„„
7 copper (10/100/1000 Mbps) Ethernet ports per IEEE
802.3:2005
„„
Non-Blocking switch fabric allows 1000 Mbps data rate on
all 7 ports simultaneously
„„
Cable link distances up to 100 Meters (EIA/TIA Cat-5E)
„„
Full duplex flow control per IEEE Std 802.3X and half duplex
back pressure, symmetric and asymmetric
Form 1 (no flanges)
Form 2 (with flanges)
„„
Shock, vibration and immersion resistant per MIL-STD-810F
„„
Auto sensing of half or full duplex operation
„„
Mighty Mouse Series 805 shell is water-tight to MILSTD-810 when mated
„„
3 form-factors available
Form 3 (heat sink)
050-118 5-PORT UNMANAGED ETHERNET SWITCH
„„
1 PORT : 10/100/1000 BASE-T consistent with IEEE 802.3
„„
4 PORTS: 1000BASE-LX (IEEE 802.3)
„„
Non-blocking switch fabric allows 1000 Mbps on all ports
„„
Material/Plating: Aluminum with Cadmium Olive Drab over
electroless Nickel (500 hours salt spray plating)
„„
6 Status LEDs to Denote: (Power, Ethernet activity with one
LED for each of the 5 ports)
„„
4 M28876 type fiber-optic connectors
„„
Mighty Mouse ultraminiature electrical connector interface
„„
IP67 in mated condition
BREAKOUT CABLES FOR 7-PORT ETHERNET SWITCH
How To Order
Active Product
Code
Material/Finish
(see Table I)
8071 - 3089 - M
3089 = L-Com Cable
3667 = PIC Cable
17
© 2014 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Length
(in Inches)
A - 48
Key Polarization
(see Table II)
Out of This World
INTERCONNECT
SOLUTIONS
Glenair, Inc.
1211 Air Way • Glendale, California • 91201-2497
Telephone: 818-247-6000 • Fax: 818-500-9912 • [email protected]
www.glenair.com
Glenair Power
Products Group
860 N. Main Street Extension
Wallingford, CT
06492
Glenair Microway Systems
7000 North Lawndale Avenue
Lincolnwood, IL
60712
Glenair Electric GmbH
Schaberweg 28
61348 Bad Homburg
Germany
Glenair Italia S.p.A.
Via Del Lavoro, 7
40057 Quarto Inferiore –
Granarolo dell’Emilia
Bologna, Italy
© 2014 Glenair, Inc.
Telephone:
203-741-1115
Facsimile:
203-741-0053
[email protected]
Glenair UK Ltd
40 Lower Oakham Way
Oakham Business Park
P.O. Box 37, Mansfield
Notts, NG18 5BY England
Telephone:
+44-1623-638100
Facsimile:
+44-1623-638111
[email protected]
Telephone:
847-679-8833
Facsimile:
847-679-8849
Glenair Nordic AB
Gustav III : S Boulevard 46
S - 169 27 Solna
Sweden
Telephone:
+46-8-50550000
Facsimile:
+46-8-50550001
[email protected]
Telephone:
06172 / 68 16 0
Facsimile:
06172 / 68 16 90
[email protected]
Telephone:
+39-051-782811
Facsimile:
+39-051-782259
[email protected]
Printed in U.S.A.
Glenair Iberica
C/ La Vega, 16
45612 Velada
Spain
Glenair France SARL
7, Avenue Parmentier
Immeuble Central Parc #2
31200 Toulouse
France
Telephone:
+34-925-89-29-88
Facsimile:
+34-925-89-29-87
[email protected]
Telephone:
+33-5-34-40-97-40
Facsimile:
+33-5-61-47-86-10
[email protected]