22 GHz Datasheet

10458F 22 GHz High Power
PIN Photodiode Receiver
DATASHEET | NOVEMBER 2013
MICROWAVE
The 10458 PIN microwave photodiode receiver incorporates a
high-speed planar PIN photodiode with low-noise bias and monitor
electronics. The unit installs in EMCORE’s System 10000 3 RU equipment rack providing a highly reliable, high power photodiode
receiver. The receiver is well matched over the operating frequency
band, thereby simplifying high-speed integration.
Performance Highlights
Applications
„„ Antenna Remoting
„„ Military Communications
„„ Phased Array Antennas
„„ Electronic Warefare (EW) Systems
„„ Delay Lines for Radar Calibration
Parameter
Min
Typ
Max
Units
Storage Temperature
Operating Temperature
-40
-
+85
°C
-10
25
+50
°C
Responsivity
0.7
-
-
A/W
Receiver Gain (1 GHz)
-9.1
-
-
dB (A/W)
Dark Current (25°C)
-
-
5
nA
Max Current
-
-
10
mA
Optical Input
-
-
11
dBm
RF Return Loss
8
12
-
dB
1280
-
1580
nm
Optical Return Loss
-
-
-40
dB
Module DC Current (Pin 1)
-
-
200
mA
Optical Wavelength Range
Features
„„ Highly Reliable Planar Photodiode Technology
„„ High Power Capability
„„ Bandwidth Up to 22 GHz
„„ Good RF Matching, 12 dB Typical
RF Characteristics
Parameter
Symbol
Condition
Min
Bandwidth
Impedence
S21 Flatness
Typ
Max
f3dB
10458F
Z
Resistively Matched SMA Connector
-
50 MHz - 22 GHz
Units
0.05
-
22
GHz
-
50
-
Ohm
-
5
6
dB p-p
Specified characteristics apply for the recommended operating conditions at beginning of life, 25°C unless noted
otherwise.
Typical S21 Data
© 2013 EMCORE Corporation | REV 2013.11
+1 626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
10458F 22 GHz High Power
PIN Photodiode Receiver
DATASHEET | NOVEMBER 2013
MICROWAVE
Pinout
Pin Number
Description
1
+15 VDC
2
No Connection
3
No Connection
4
Ground
5
Ground
1
6
Photodiode Current Monitor 1 V / 1mA
71,2
Received Optical Power Alarm
8
1
No Connection
91
No Connection
1
1. Pins 5-9 can be monitored at the rear of the System 10000 chassis
2. Open collector alarm, external 1K pull-up required. Capable of sinking 20 mA
Outline Information
Ordering Information
Model Number
Description
10458F-SA
Receiver 22 GHz, SMA, AC Coupled, SC/APC
10458F-FA
Receiver 22 GHz, SMA, AC Coupled, FC/APC
10990A
System 10000 Equipment Chassis, 3 RU
10901G-NA
System 10000 Power Supply, US Power Cord
10901G-UK
System 10000 Power Supply, UK Power Cord
10901G-EU
System 10000 Power Supply, EU Power Cord
© 2013 EMCORE Corporation | REV 2013.11
+1 626-293-3400
[email protected]
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.