3 i Series Detectors Intelligent Conventional Smoke Detector Series Description The System Sensor®, i3 Series smoke detectors represent a significant advancement in conventional detection. The i3 family is founded on three principles: installation ease, intelligence, and instant inspection. The i3 Series redefines installation ease with its plug-in design. This design allows an installer to pre-wire the bases included with the heads. The large wire entry port and the in-line terminals provide ample room to neatly route the wiring inside the base. The base accommodates a variety of backbox mounting methods as well as direct mounting with drywall anchors. To complete the installation, the i3 heads plug-in to the base. The i3 detectors offer a number of intelligent features to simplify testing and maintenance. Drift compensation and smoothing algorithms are standard with the i3 line, to minimize nuisance alarms. When the i3 is connected to the following, the 2-wire, i3 detectors are capable of generating a remote maintenance signal. • 2W-MOD Loop Test/Maintenance Module • i3 ready panel (MS-2 and MS-4) equipped with the i3 protocol The remote maintenance signal indicates when the i3 required cleaning and it is indicated via an LED located at the module and/or the panel. To read the sensitivity of i3 detectors, the SENS-RDR is a wireless device that displays the sensitivity in terms of percent per foot obscuration. The i3 Series provide wide angle, red and green LED indicators that allow you to instantly inspect the following detector conditions: • normal standby • alarm • out-of-sensitivity • freeze trouble condition When the i3 is connected to the 2W-MOD Loop Test/Maintenance Module or an i3 ready panel (i.e., MS-2 and MS-4) with the i3 protocol, the EZ Walk loop test feature is available on 2-wire i3 detectors. This feature verifies the initiating loop wiring by providing the LED status indication at each detector. i3 Features • Constructed of built-in remote maintenance signaling and a built-in test switch. • Provides drift compensation and smoothing algorithms. • Contains a Stop-Drop ‘N Lock attachment to the base. • Offers simplified sensitivity measurement. • Includes plug-in detector line - mounting base included. • Has a large wire entry port. • Installs with in-line terminals with SEMS screws. • Mounts to octagonal and single-gang backboxes, 4” (10.16 cm) square backboxes, or direct to ceiling. • Designed with a removable detector cover and chamber to simplify cleaning. • Equipped with a wide angle, dual color LED indication. • Uses loop testing via EZ Walk feature. SIGNALING FM APPROVED S4011 3032010 7272-1653:0152 S5512 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com CS-2513 Rev. B page 1 of 2 ©2013 by Honeywell International Inc. All rights reserved. Specifications Operating Voltage: Standby Current: Maximum Alarm Current: Alarm Contact Ratings: Operating Temperature Range: 2W-B and 4W-B: 2WT-B and 4WT-B: Operating Humidity Range: Thermal Sensor: Freeze Trouble: Sensitivity: Input Terminals: Dimensions (including base): Weight: Mounting: Ordering Information 12/24 VDC (peak) 2-wire: 50 ìA maximum average 4-wire: 50 ìA maximum average Part Number Thermal Wiring Alarm Current 2W-B No 2-wire 130 mA max. limited by control panel 2WT-B Yes 2-wire 130 mA max. limited by control panel 4W-B No 4-wire 20 mA @ 12V, 23mA @24V 4WT-B Yes 4-wire 20 mA @ 12V, 23mA @24V 2WTA-B Yes 2-wire 130 mA max. limited by control panel 2WTR-B Yes 2-wire 130 mA max. limited by control panel 4WTA-B Yes 4-wire 35 mA 4WTR-B Yes 4-wire 35 mA 4WTAR-B Yes 4-wire 50 mA 4WITAR-B Yes 4-wire 50 mA 2-wire: 130 mA limited by control panel 4-wire: 20 mA @ 12 V, 23 mA @ 24V 2-wire: n/a 4-wire: 0.5 A @ 30 V AC/DC 32°F – 120°F (0°C – 49°C) 32°F – 100°F (0°C – 37.8°C) 0% to 95% RH non-condensing 135°F (57.2°C) fixed 2WT-B and 4WT-B only: 41°F (5°C) 2.5% /ft. nominal 14 – 22 AWG Part Number 2W-MOD 5.3 inches (127 mm) diameter, 2.0 inches (51 mm) height 6.3 oz. (178 grams) 3.5-inch (8.8 cm) octagonal backbox 4-inch (10.16 cm) octagonal backbox. Single-gang back box 4-inch (10.16 cm) square backbox with plaster ring. Direct mount to ceiling. SENS-RDR RT A77-AB2 CRRS-MODA CSENS-RDRA Description 2-wire loop test/maintenance module. Removal / replacement tool Retrofit adapter bracket Reversing relay/synchronization module. Sensitivity reader GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 CS-2513 Rev. B page 2 of 2 www.gamewell-fci.com