SpectrAlert® Advance Indoor Notification Appliances 520 Hz Low Frequency, Selectable Output Speaker Strobes and Dual Voltage Evacuation Speakers Description The SpectrAlert® Advance Series speakers are UL® 464 Compliant for the 520 Hz low frequency signal and is compatible with the E3 Series® Voice Evacuation panels that use the AM-50 Series amplifiers. These speakers and speaker strobes are designed for ease of installation and to reduce ground faults. The plug-in construction allows the installer to prewire mounting plates and dress the wires before plugging in the speakers. The plastic cover prevents nicked wires by covering exposed speaker components. This unique design allows faster installations that provide instant feedback to ensure that the following conditions are met. • Wiring is properly connected. • Rotary switches are set to the selected voltage and power settings. • 11 field selectable candela settings are used for wall and ceiling speaker strobes. The low total harmonic distortion of the SP model speaker offers high fidelity sound output. The SP model speaker maintains a low frequency alert tone (that is compatible with the E3 Series Voice System), and is compliant with the low frequency requirements defined in the UL Standard 464, Section 24.3 SpectrAlert Advance makes installation easy 1. Attach a universal mounting plate to a 4” x 4” x 2-1/8” back box. Flush mount applications are achievable without the need for an extension ring. 2. Connect the notification appliance circuit or speaker wiring to the PEMS terminals on the mounting plate. 3. To attach the speaker or speaker strobe to the mounting plate, insert the product tabs into the mounting plate grooves. 4. Rotate the device into position to lock the product pins into the mounting plate terminals. The device will temporarily hold in place with a catch until it is secured with a captured mounting screw. SpectrAlert Advance Features • Complies with UL® Standard 464 for 520 Hz Low Frequency. • Offers a plug-in design. • Protective cover isolates speaker components, reduces ground faults. • Electrical compatibility with existing SpectrAlert products • Field selectable candela settings on wall & ceiling units: - Standard: 15, 15/75, 30, 75, 95, 110, 115 - High: 135, 150, 177, 185 • Shorting spring on mounting plate tests continuity before installation. • Rotary switch simplifies field selection of speaker voltage and power settings. • Universal mounting plate for wall- & ceiling-mount units. • Compatible with System Sensor synchronization protocol. • SP model speakers offer high fidelity sound output. • Automatic selection of 12 or 24 volt operation at 15 and 15/75 candela. • No extension ring required. • Includes a ceiling and a wall mount application. • Optional tamper resistant Torx head screw included. SIGNALING MEA Approved 10-08-E 7300-1653:201 S4048 Vol. 1, Sec. 2 SpectrAlert® and E3 Series® are registered trademarks of Honeywell International Inc. ® UL is a registered trademark of Underwriter’s Laboratories Inc. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9021-60346 Rev. B page 1 of 3 ©2014 by Honeywell International Inc. All rights reserved. Architectural/Engineering Specifications UL Maximum Strobe Current Draw (mA RMS) General SpectrAlert Advance speaker and speaker strobes shall mount to a 4” x 4” x 2-1/8” (10.16 x 10.16 x 5.5 cm) backbox. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appliance circuit and amplifier wiring shall terminate at the universal mounting plate. Indoor SpectrAlert Advance products shall operate between 32°F and 120°F from a regulated DC, or full-wave rectified, unfiltered power supply. Speaker strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95, 110, 115, 135, 150, 177, 185. Speaker The speaker shall be a System Sensor SpectrAlert Advance model dual-voltage transformer speaker capable of operating at 25.0 or 70.7 nominal VRMS. It should be listed to UL® 1480 and shall be approved for fire protective service. The speaker shall have a frequency range of 400 to 4000Hz and shall have an operating temperature between 32°F and 120°F. Speaker shall have power taps and voltage that are selected by rotary switches. Speaker Strobe Combination The speaker strobe shall be a System Sensor SpectrAlert Advance model Listed to UL 1480 and UL 1971 and be approved for fire protective signaling systems. Speaker shall be capable of operating at 25.0 or 70.7 nominal VRMS selected via rotary switch, and shall have a frequency range of 400 to 4000Hz. Speaker shall have power taps which are selected by rotary switch. The strobe shall comply with the NFPA 72 requirements for visible signaling appliances, flashing at 1Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system. Standard Candela Range High Candela Range Candela 8 to 17.5 Volts 16 to 33 Volts DC FWR DC FWR 15 123 128 66 71 15/75 142 148 77 81 30 NA NA 94 96 75 NA NA 158 153 95 NA NA 181 176 110 NA NA 202 195 115 NA NA 210 205 135 NA NA 228 207 150 NA NA 246 220 177 NA NA 281 251 185 NA NA 286 258 Table 1: UL Maximum Strobe Current Draw (mA RMS) Sound Output UL Reverberant (dBA@10 ft) 2 W 1 W 1/2 W 1/4 W Wall Mount SP Series 86 83 80 77 Ceiling Mount SPC Series 86 83 80 77 Wall Mount SPS Series 85 82 79 76 Ceiling Mount SPSC Series 85 82 79 76 Table 2: Sound Output Synchronization Module The module shall be a System Sensor Sync Circuit model MDL listed to UL 464 and shall be approved for fire protective service. The module shall synchronize SpectrAlert strobes at 1Hz. The module shall mount to a 4-11/16” x 411/16” x 2-1/8” (10.4 x 10.4 x 5.5 cm) backbox. The module shall also control two Style Y (Class B) circuits or one Style Z (Class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones they control. The module shall not operate on a coded power supply. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9021-60346 Rev. B page 2 of 3 www.gamewell-fci.com Specifications Ordering Information Physical Specifications Wall Mount Part Number Operating Temperature: 32°F to 120°F (0°C to 49°C) Humidity Range: 10 to 93% non-condensing Wall-Mount Dimensions: SP Speaker: 6.0”L x 5.0”W x 2.8”D SPS Speaker/Strobe: 6.0”L x 5.0”W x 4.7”D Ceiling-Mount Dimensions: SPC Speaker: 6.8”Dia x 2.8”D SPSC Speaker/Strobe: 6.8”Dia x 4.7”D Electrical/Operating Specifications: Nominal Voltage (speakers): Maximum Supervisory Voltage (speakers): Strobe Flash Rate: Nominal Voltage (Strobes): Operating Voltage Range (includes fire panels with built-in sync): Operating Voltage with MDL Sync Module: Frequency Range: Power: 25 Volts or 70.7 Volts (nominal) 50VDC 1 flash per second Regulated 12VDC/FWR or regulated 24VDC/FWR Description NOTE1: Add -P to model number for plain housing (no ‘FIRE’ marking on the cover), e.g. SPSW-P. NOTE2: (W) indicates white coloring; (R), red. SP(W)(R): Speaker only (white/red) SPS(W)(R)*: Speaker strobe, selectable candela (15, 15/75, 30, 75, 95, 100, 115) SPS(W)(R)H*: Speaker strobe, selectable candela, high cd (135, 150, 177, 185) SPSR-P: High fidelity speaker strobe (red) SPSRH-P: Speaker strobe, high candela (red) SPSW-ALERT: Speaker strobe, amber lens, ALERT, (white) SPSW-CLR-ALERT: Speaker strobe, clear lens, ALERT, (white) SPSW-P: Speaker strobe, plain, (red) SPSWH: Speaker strobe, high candela, (white) SPSWH-P: Speaker strobe, high candela, plain (red) Ceiling Mount 8 to 17.5V (12V nominal) or 16 to 33V (24 nominal) 9 to 17.5V (12V nominal) or 17 to 33V (24V nominal) 400 to 4000Hz ¼, ½, 1, 2 watts Part Number SPC(W)(R): SPSC(W*)(R): Description Speaker only Speaker strobe, selectable candela (15, 15/75, 30, 50, 75, 95, 110, 115) SPSC(W*)(R)H: Speaker strobe, selectable candela, high cd (135, 150, 177, 185) SPSCW-CLR-ALERT: Speaker strobe, clear lens, ALERT, (white) SPSCW-P: Speaker strobe plain, (white) SPSCWH-P: Speaker strobe, high candela, plain (white) Accessories Part Number RFP: RFPW: SPBBSC: SPBBSCW: SPBBS: SPBBSW: TR: TRW: TRC: TRCW: Description Retrofit plate, red Retrofit plate, white Ceiling mount backbox skirt, red Ceiling mount backbox skirt, white Wall mount backbox skirt, red Wall mount backbox skirt, white Wall mount trim ring, red Wall mount trim ring, white Ceiling mount trim ring, red Ceiling mount trim ring, white GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 www.gamewell-fci.com 9021-60346 Rev. B page 3 of 3