InnovairFlex™ Series Duct Smoke Detector Accessories Notification and Test Accessories Description The InnovairFlex Series Duct Smoke Detector accessories add functionality to the Duct Detection System. These accessories are designed to provide quick and convenient, accessibility for visual inspections and they offer effective audible and visible notification options. All Gamewell-FCI duct detectors and accessories are UL® Listed. The following duct smoke detector accessories are available. • APA151 Piezo Annunciator • MHR Mini-Horn, Red • MHW Mini-Horn, White • RA100Z/RA100ZA Remote Annunciator • RTS151 Remote Test Station • RTS151KEY Remote Test Station with Key • RTS2 Multi-Signaling Accessory • AOS Add-On Strobe • RTS2-AOS Multi-Signaling Accessory InnovairFlex-Series Accessories Features The APA151 piezo annunciator replaces the APA451 with a new and improved look. It provides the following: • An audible alarm signal. • A red LED to indicate alarm status. • A green LED to indicate power status. It is intended for use with the Gamewell-FCI 4-wire conventional duct smoke detector applications without a system control panel, to comply with NFPA 90A. The MHR and MHW SpectrAlert® Advance mini-horns feature temporal or continuous tones that provide high and low volume settings. Their small footprint allows mounting to single-gang backboxes and are used for applications where a small device is desired. The RA100Z and RA100ZA remote annunciators are designed for both conventional and intelligent applications. The red LED provides visual indication of an alarm condition. The RTS151 and RTS151KEY remote test stations are automatic fire detector accessories designed to test duct smoke detectors from a convenient location. For 4-wire detectors, the RTS151KEY test station features a multicolored LED that alternates between steady green and red. For 2-wire detectors, the LED illuminates red for alarm. • APA151 piezo annunciator offers a new style and provides enhanced audible alarm signals. • MRH and MHW SpectrAlert Advance mini-horns feature temporal and continuous tones for both high and low volume settings. • RA100Z and RA100ZA remote annunciators flexible versatility are used for both conventional and intelligent applications. • RTS151 and RTS151KEY remote test stations are designed to test duct detectors from remote locations. • RTS2 and RTS2-AOS multi-signaling accessories are used with the InnovairFlex 4-wire conventional duct smoke detectors. SIGNALING ® InnovairFlex™and Sync•Circuit™ are trademarks and SpectraAlert is a registered trademark of Honeywell International Inc. ® UL is a registered trademark of Underwriters Laboratories Inc. FM APPROVED URRQ.S2522 7300-1653:0212 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9021-60532 Rev. B page 1 of 3 ©2013 by Honeywell International Inc. All rights reserved. Description (Continued) Specifications, Duct Smoke Detector Accessories (Continued) The RTS2 and RTS2-AOS multi-signaling accessories are designed to operate with the InnovairFlex 4-wire conventional duct smoke detectors. These accessories include a key switch that can be used to select one of two connected sensors to be tested, reset, or both by pressing a push button switch. They also enable sensitivity measurements using the SENS-RDR sensitivity reader (sold separately). The AOS (Add-On Strobe) is an optional accessory included with the RTS2-AOS model. Specifications, Duct Smoke Detector Accessories APA151 Piezo Annunciator Voltage: Regulated 24 VDC Operating Voltage: 16 to 33 VDC Maximum Alarm Current: 30 mA Temperature Range: 0°C to 49°C (32°F to 120°F) Relative Humidity: 10 to 93% non-condensing Wire Gauge: 12 to 18 AWG Dimensions: 4.6” H × 2.9” W × .45” D (11.6 H x 7.3 W x 1.1 D cm) MHR/MHW SpectrAlert® Advance Mini-Horns Voltage: Regulated 12 DC or FWR (Full Wave Rectified) or Regulated 24 VDC or FWR Operating Voltage: 8 to 33 VDC (9 to 33 VDC with Sync•Circuit™ Module) Sounder Current Draw: 22 mA RMS max. at 8 to 17.5 Volts DC 17 mA RMS max. at 8 to 17.5 Volts FWR 29 mA RMS max. at 16 to 33 Volts DC 25 mA RMS max. at 16 to 33 Volts FWR Temperature Range: 0°C to 49°C (32°F to 120°F) Humidity Range 10 to 93% non-condensing Nominal Sounder Frequency: 3 kHz Wire Gauge: 12 to 18 AWG Dimensions 4.6” H × 2.9” W × 0.45” D (11.6 H x 7.3 W x 1.1 D cm) RA100Z/RA100ZA Remote Annunciator Voltage Range: Conventional System: 3.1 to 32 VDC Intelligent System: 18 to 32 VDC Maximum Alarm Current: 12 mA Dimensions: 4.6” H × 2.8” W × 1.3” D (11.6 H x 7.1 W x 3.3 D cm) RTS151 Remote Test Station Power Requirements: Alarm LED: 2.8 to 32 VDC, 12 mA max. Total Current: 105 mA max. Test Switch: 10 VA @ 32 VDC Reset Switch: 10 VA @ 32 VDC Alarm Response Time: 40 seconds max. Temperature Range: –10°C to 60°C (14°F to 140°F) Relative Humidity: 95% non-condensing Wire Gauge: 14 to 18 AWG Dimensions: 4.8” H x 2.90” W x 1.4” D (12.1 H x 7.3 W x 3.5 D cm) RTS151KEY Remote Test Station with Key Power Requirements: Power LED (Green): 14 to 35 VDC, 12 mA max. Alarm LED (Red): 2.8 to 32 VDC, 12 mA max. Total Current: 105 mA max. Alarm Response Time: 40 seconds max. Temperature Range: –10°C to 60°C (14°F to 140°F) Relative Humidity: 95% non-condensing Wire Gauge: 14 to 18 AWG Dimensions 4.6” H × 2.75” W × 1.8” D (11.6 H x 6.9 W x 4.5 D cm) RTS2 and RTS2-AOS Multi-signaling Accessory Voltage: 20 to 29 VDC Power Requirements: Standby: 3.0 mA max. Trouble: 16.0 mA max. Alarm without strobe: 30 mA max. Alarm with strobe: 55 mA max. Sounder: 85 dBA at ten feet Temperature Range: –10°C to 60°C (14°F to 140°F) Relative Humidity: 95% non-condensing Wire Gauge: 14 to 22 AWG Dimensions: 4.8” W x 5.3” H x 1.6” D (12.1 W x 13.4 H x 4.0 D cm) For information on the most recent product specifications and listing information, prefer to the Gamewell-FCI Web site at www.gamewell-fci.com. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9021-60532 Rev. B page 2 of 3 www.gamewell-fci.com Accessories Gamewell-FCI provides system flexibility with a variety of accessories, including two remote test stations and several different means of visible and audible system annunciation. As with our duct smoke detectors, all duct smoke detector accessories are UL Listed. Figure 1 RTS151 UL S2522 Figure 2 RTS151KEY UL S2522 Figure 3 APA151 UL S4011 Figure 4 RTS2-AOS UL S2522 Figure 5 RA100Z UL S2522 Figure 6 MHW UL S4011 Figure 7 MHR UL S4011 Figure 8 RTS2-AOS with PS24LOW Strobe and PS12/24 LENSW lens Ordering Information Accessories Part Number Description APA151 Piezo Annunciator MHR Mini Horn, Red MHW Mini Horn, White RA100Z/RA100ZA Remote annunciator alarm LED RTS151 Remote test station Part Number Description RTS151KEY RTS2 AOS RTS2-AOS Remote test station with key lock Multi-signaling accessory Add-On Strobe Multi-signaling accessory GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 www.gamewell-fci.com 9021-60532 Rev. B page 3 of 3