CTX-95 City Tie Expander g2282ph1.jpg The Gamewell-FCI City Tie Expander (CTX-95) is a singlecircuit, reverse-polarity transmitter that provides the interface between the Fire Alarm Control Panel (FACP) and a municipal system or central station. The CTX-95 connects to the panel via a three-wire SLC circuit. Use the CTX-95 to transmit the following: • supervisory signals and their faults on a separate city tie from the main system • alarms to a central station to indicate a building alarm or an unauthorized entrance to the building The CTX-95 is either surface or flush mounted and has an integral LED that lights at device activation. Operation CS-2042ph2.wmf Description CTX-95 CTX-95 Features The CTX-95 is a programmable reverse polarity city tie circuit. The module contains the XP-95 protocol to communicate with the Gamewell-FCI 600 Series of analog addressable control panels. The module provides the power and supervision for the reverse polarity city tie. Programming CTX-95 selected circuits ensures that only their alarms and troubles are transmitted to the central station. Programming To program the CTX-95, set a single DIP switch so that it is easily accessible on the device’s printed circuit board. The DIP switch is used to set the address of the CTX-95. All other programming is accomplished using any of the following: • Fire Alarm Control Panel • Laptop computer • Control Panel Operator’s Display • Compatible with all Gamewell-FCI 600 Series analog addressable FACPs • Connects to addressable SLC • Provides one reverse polarity circuit • Contains an over-voltage built-in protector • Has LED annunciates activation • Is fully supervised • Offers surface or flush mounting • Field programmable • Style 4, 6, or 7 wiring • Includes screw terminals for field-wiring connections Mounting The CTX-95 mounts in a standard 4.688" (11.908 cm) electrical backbox. The CTX-95 should be mounted in an easily accessible location so that you can identify the LED for quick indication of proper connection and activation. SIGNALING S521 7300-1703:0135 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com CS-2042 Rev. B page 1 of 2 ©2013 Honeywell International Inc. All rights reserved. Ordering Information Engineer’s Specifications The Contractor shall furnish and install an electronic addressable reverse polarity transmitter. It shall connect to the FACP via a three-wire SLC circuit. It shall be fully programmable and supervised with a LED to indicate activation. It shall be Gamewell-FCI CTX-95. Model Description CTX-95 City tie expander provides one reverse polarity city connection for addressable loop. XP95 protocol compatible. Trim ring for flush-mounting CTX-95. 70839 Specifications Input Power: Quiescent Current: Alarm Current: Operating Temperature: Relative Humidity: Housing Requirements: Output Rating: 24 VDC from three-wire analog circuit. 0.002 A 0.02 A 0° C to 49° C (32° F to 120° F) 85% non-condensing 4.6888” (11.908 cm) backbox 0.015 A maximum GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 CS-2042 Rev. B page 2 of 2 www.gamewell-fci.com