Butt Contact Pushbutton Switches SERIES 32 SPST and SPDT, Stackable with LED •Stackable, Provides Custom Switch Arrangements •.200" Centers When Stacked •SPST–N.O., SPST–N.C. Circuitry in the Same Package •Process Compatible, Internally Sealed Plunger •Status/Reset or Press-to-Test Functions with Companion LED XXXX GRAYHILL GRAYHILL GRAYHILL GRAYHILL GRAYHILL in inches (and millimeters) E.I.A. DATE CODE Rating at 28 Vdc Resistive Operations at Rated Part LoadNumber 100,000 32-01 150 mA ActionTotal Travel .200(5,08) TYP. .120(3,05) .220(5,59) .100(2,54) .100(2,54) Momentary .050 (1,27) Approx. .084(2,13)DIA. .180 (4,57) .272(6,91) .110(2,79) .090(2,29) .050(1,27) .070(1,78) .100–.004(2,54–0,10)TYP. BTWN.PINSOFSTACKED SWITCHES .030–.002 (0,76–0,05) DIA.4PLS. .050(1,27) .100–.004 (2,54–0,10) .100–.004 (2,54–0,10)TYP. BTWN.PINSOF SAMESWITCH .100–.004 (2,54–0,10) .200(5,08) REF. .190(4,83) .400(10,16) Unless otherwise stated, linear dimension tolerances are ± .010 (0,25); diameters are ± .005 (0,13) LED DIMENSIONs SWITCH CIRCUITRY in inches (and millimeters) SPSt n.C. .220(5,59) .200(5,08)REF. .100(2,54) .118(3,0) DIA. GRAYHILL .050(1,27) .100(2,54) .110 (2,79) .180 .010 (4,57) (0,25) CATHODE .190 (4,83) Actuator SPSt n.O. .100(2,54) .230(5,84) .272 (6,91) N.C. N.C. N.O. N.O. Alternate Wiring C Actuator .020(0,51) SQ.2PLS. N.C. SPdt BreaK BeFOre C MaKe CONNECTPINS ONPCBOARD N.O. Unless otherwise stated, linear dimension tolerances are ± .010 (0,25); diameters are ± .005 (0,13) Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois E-9 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com Pushbutton Switches SWITCH Dimensions Butt Contact Pushbutton Switches Specifications Ordering Information: Individual Units Rating Criteria Contact Resistance: 25 milliohms maximum on a new switch Voltage Breakdown: 1,000 Vac between mutually insulated parts Insulation Resistance: 1,000 megohms minimum Switch and LED Operating Temperature: -40°C to +85°C Part NumberDescription 32-01 32-02 32LED-RED 32LED-GRN 32LED-YEL Switch, 10 microinches gold plating, black button, red body Switch, 30 microinches gold plating, black button, red body Red LED and holder, red body Green LED and holder, red body Yellow LED and holder, red body Grayhill or your local Distributor will assemble stacks of switches, LEDs or combinations. Materials and Finishes Switch Base, LED Base, Button and Cover: Polyester Shorting Bar: Phosphor bronze, gold-plated over nickel Switch Terminals: Brass, gold-plated over nickel LED Terminals: Steel, tin-plated Spring: Tinned Music Wire Pushbutton Switches LED Information MCD* Viewing Color Min. Max.Angle Red Green Yellow 0.8 0.8 0.8 5.0 3.2 3.2 60° 60° 60° *MCD = Millicandellas at 2 mA Assemblies of Switches or Switches and LED Combinations Example Part Number 32-01-6-AARGYA Basic switch part number (see Ordering Information) Number of ganged elements (2 thru 6) Arrangement definition (left to right, front view) A = Switch R = Red LED G = Green LED Y = Yellow LED Example part number describes a stack of 6 elements consisting of two switches, a red LED, a green LED, a switch and a yellow LED. Shorter stacks will have fewer letters in the arrangement definition. Contact Grayhill for stacks of more than six elements. Recommended Current: 2mA Current limiting resistor is not supplied. Assemblies of LEDs Only Example Part Number 32LED-3-RYG Basic identification for LEDs Number of ganged elements (2 thru 6) Arrangement definition (left to right, front view) R = Red LED G = Green LED Y = Yellow LED Example part number describes a stack of 3 LEDs, arranged red, yellow and green from left to right. Maximum number of stacked LEDs in this part numbering scheme is six. Contact Grayhill for stacks of more than six elements. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com