Multi-Deck Rotary Switches SERIES 42, 43, 44 and 54

Multi-Deck Rotary Switches
SERIES 42, 43, 44 and 54
1" Diameter, 1 Amp, Standard,
Military SR04
Features
•Rugged Construction Ensures Switch Operation for the Life of Your Equipment
•Many Circuitry Options
•MIL Qualified Versions MIL-S-3786/04
•Features Choice Include: Shaft/
Panel Seal, Adjustable Stops, PC Termination, UL Recognized
DIMENSIONS in inches (and millimeters)
Standard, UL Recognized and
Military Qualified Solder Lug Styles
Rear Views
Series 42
1.015±.015
(25,78±0,38)DIA.
OVERTERMINALS
#1THREAD
.064(1,63)MIN.DIA.
HOLEAFTERPLATING
Series 44
.250+.001–.002
(6,35+0,03–0,05)
DIA.
1.170±.015
(29,72±0,38)DIA.
OVERTERMINALS
GRAyHILL
6
1
7
15°
5
3/8-32UNEF-2ATHREAD
(MTG.HOLE=3/8DIA.MIN.)
9
10
12
11
8
BUSHINGKEyWAy
.066±.002(1,68±0,05)WIDEBy
.036±.003(0,91±0,08)DEEP
FROMA.375(9,53)DIA.
NON-TURNTAB
.125±.003(3,18±0,08)WIDEBy
.031±.003(0,79±0,08)THICK
3
INTEGRALASSEMBLyNUT,
DONOTREMOVE
C
L OFBUSHING
KEyWAy
SEENOTE
4
DIM.C
±.015(0,38)
GRAyHILL
10
1
36°
2
DIM.BREF.
STUD
PROJECTION
3
DIM.F±.015(0,38)
7
8
9
4
2
Rotary Switches
.250
±.020
(6,35
±0,51)
DIM.A+.046–.020
(+0,05–0,51)
5
.437
±.020
(11,10
±0,51)
DIM.E
±.010(0,25)
.219
±.005
(5,56
±0,13)
.437
±.020
(11,10
±0,51)
6
DIM.D
±.010(0,25)DIA.
OFNON-TURN
C
L
.375 TAB
±.015
(9,53
±0,38)
30°
Note: Common location for a single pole per
deck switch. For common location on
multi-pole switches, see circuit diagrams.
.064(1,63)MIN.DIA.
HOLEAFTERPLATING
For rear view of 45°, 60° and 90°,
see circuit diagram.
No.
of
Decks
1
2
3
4
5
6
Dimension
A
1.025 (26,04)
1.371 (34,82)
1.717 (43,61)
2.063 (52,40)
2.409 (61,19)
3.005 (76,33)
Dimension B
Approx. Weight
No.Dimension B
Style
StyleGrams
of
Dimension
Style
Style
A
M or H
42
44
Decks
A
A
M or H
.062 (1,57)
.062 (1,57)
.062 (1,57)
.062 (1,57)
.062 (1,57)
.312 (7,92)
.030 (0,76)
.030 (0,76)
.030 (0,76)
.030 (0,76)
.030 (0,76)
.280 (7,11)
40.0
45.5
51.0
56.5
62.0
67.5
Grayhill part number and date code marked on detent cover label.
Customer part number marked on request. Military part number
marked when required. UL recognized markings as required.
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
48
7
3.351 (85,16)
55
8
3.697 (93,90)
62
9
4.043 (102,69)
69
10
4.389 (111,48)
76 11 4.735 (120,27)
83
12
5.081 (129,06)
Dimension
Series 42
Series 44
C
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
.312 (7,92)
D
.280 (7,11)
.280 (7,11)
.280 (7,11)
.280 (7,11)
.280 (7,11)
.280 (7,11)
E
Approx. Weight
Grams
42 44
73.0
78.5
84.0
89.5
95.0
100.5
90
97
104
111
118
125
F
.562 (14,27) 1.000 (25,4)
.830 (21,08) .093 (2,36)
.642 (16,31) 1.162 (29,51) 1.000 (25,4) .121 (3,07)
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
CIRCUIT DIAGRAMS: Solder Lug Terminals
Switch is Viewed From Shaft End and Shown in Position No. 1
Note: All common terminals are located above base terminals as shown.
10
12
C1
1
6
4
C
L
1 C1
6
5
2
C2
C3
9
C4
10 11
7
8
C4
12
C
L
1 C1
6
5
4
3
C5
9 10
7
6
2
C3
FOUR POLE
C
L OF
BUSHING
KEyWAy
9
8
6
5
10
1
5
4
3
C2
1
2
C
L
C1
FIVE OR SIX POLE
Rear Views
C4
7
6
C2
8
4
CL
1 C1
8
4
1
2
3
7
C3 5
CL
C1
15°
2
3
C2
45°
TWO POLE THREE OR FOUR POLE 6
4
3
3
2
CL
1 C1
C2
2
15°
3
1
5
6
4
C
L
1 C1
C1
3
5
6
4
C2
4
C3
5
6
C
L OF
BUSHING
KEyWAy
2
ONE POLE
6
4
5
2
7
6
5
1
C6
2
60°
TWO POLE THREE POLE C
L OF
BUSHING
KEyWAy
4
4
C2 3
3
C
L
1 C1
C1
1
15°
3
Series 44
90° Angle
of Throw
4
GRAyHILL
ONE POLE
1
2
2
2
ONE POLE
TWO POLE
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
90°
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
C
L OF
BUSHING
KEyWAy
C1
Series 44
60° Angle
of Throw
2
C1
C1
2
TWO POLE
4
5
3
4
CL
9
3
5
1
8
4
8
3
6
10 C
L
2
7
6
7
6
5
C1
ONE POLE
Series 44
45° Angle
of Throw
C2
1
4
3
12
C2
5
11
12
C2
Series 42 & 43
36° Angle
of Throw
11
TWO POLE THREE POLE THREE POLE
Styles A, D and S
Styles M, MS, H and HS
8
7
C3
7
2
3
4
10
GRAyHILL
ONE POLE
3
12
9
GRAyHILL
5
2
3
8
11
8
4
10
7
C
L
1 C1
6
C3
9
1
5
8
11
C2 7
12
7
9
8
1
Series 44 & 54
30° Angle
of Throw
C
L OF
BUSHING
11 KEyWAy
2
8
10
3
9
Multi-Deck Rotary Switches
SERIES 42
1" Diameter, 1 Amp, PC Mount
Features
•Satisfies High Current Board Level Applications
•36° Angle of Throw Permits up to Ten Positions
•UL Recognized Versions
DIMENSIONS in inches (and millimeters)
DIM. A + .046 – .020
(+1,17 –0,00)
C
L C
L C
L
.437 ± .020
(11,10 ± 0,51)
.600 ± .031
(15,24 ± 0,79)
.174
± .010
(4,42
± 0,25)
.250 ± .020
(6,35 ± 0,51)
#1 THREAD
Termination
One-sided termination is standard for switches with 2 to 5
positions per pole. Two-sided termination is standard for
switches with 6 thru 10 positions per pole.
6 thru 10 positions
per pole and terminals from one
side of switch are
available on special
order. See Special
Options, page F-10
or contact Grayhill.
10
1
9
8
C
L OF
BUSHING
KEyWAy
2
3
C1
PC BOARD MOUNTING PATTERN
CL OFFRONTSUPPORT
PLATEMOUNTING
HOLES
.375
(9,53)
TyP.
.500
(12,7)
TyP.
.750
(19,05)
.250
TyP.
(6,35)
TyP.
6
5
2
Standard Style
CL OFBASE
TERMINAL
MOUNTING
HOLES
CL OFREAR
SUPPORT
PLATE
MOUNTING
HOLES
CL COMMON
TERMINAL
MOUNTING
HOLES
.174(4,42)
TyP.
.492
(12,50)
4
7
.110(2,79)
.174(4,42)TyP.
ONE POLE
1.470 ± .020
(37,34 ± 0,51)
TYP.
.250 ± .015
(6,35 ± 0,38) TYP.
.187 ± .015
(4,75 ± 0,38) TYP.
.735 ± .010
(18,67 ± 0,25) TYP.
Shaft And panel seal: Srs. 42 & 44
Shown for a two deck switch
SHAFTEND
Note: All common terminals are located above
base terminals as shown.
3
5
Switch is Viewed From Shaft End
and Shown in Position No. 1
3/8-32 UNEF-2A THREAD
(MTG. HOLE=3/8 DIA. MIN.)
7
The Series 42/44 Styles, which include the letter "S" with
the exception of style "HS", are watertight sealed to the
mounting panel by utilizing the panel seal kit.These switches
are built with a front plate that does not have a non-turn tab.
The panel seal kit consists of a grooved hex nut, a keyed
washer and a keyed panel seal. The grooved hex nut is
assembled to the switch bushing. The keyed washer is slid
down the bushing slot and seated into the hex nut groove.
The seal is likewise assembled to the bushing and hex nut.
The keyed washer is required to provide seal integrity in the
bushing slot. When assembled to the panel, the grooved
nut, backing washer and seal require the same space as a
normal mounting nut. Hence, the seal kit does not alter the
dimensions. Panel seal kit includes a non-turn washer to
be used into a blind hole in the back panel. For panel seal
kit part dimensions, see Accessories. Style "HS" switches
use a similar sealing method, except the integral assembly
nut retains the panel seal. All sealed style switches are
provided with a shaft to bushing internal seal.
adjustable stop switches: Series 42 and 44
5
3
4
T
RS P
FI TO
S
3
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
FI
ST RST
OP
4
6
7
5
9
11
The standard and UL recognized switches are also Equivalent Styles
For style 44M30, use 44D30 initially
available with adjustable stops. Two removable For style 42A36, use 42D36,
For style 42U36, use 42UD36
stop washers allow you to limit the number of For style 44A30, use 44D30
For style 44U30, use 44UD30
For style 42M36, use 42D36 initially
switch positions as needed. A knurled nut is
supplied to secure the washers if desired.
These switches have no bushing keyway. All other
Front Views
dimensions, ratings and characteristics are the
8
8 9 10
6
same as the standard fixed stop styles. Although
not military qualified, the adjustable styles are
useful in military equipment prototypes. However,
USEOFKNURLED
when submitting the equipment for government
NUTISOPTIONAL
approval, the fixed stop qualified style should
Series
42 Series
44
be substituted.
2
Rotary Switches
C
L OF BUSHING
KEYWAY
Grayhill part number and date code marked on detent cover label. Customer part number marked on request. UL recognized marking as required.
COMMON LUG
INTEGRAL ASSEMBLY NUT,
DO NOT REMOVE
BUSHING KEYWAY
.066 ± .002 (1,68 ± 0,05) WIDE BY
.036 ± .003 (0,91 ± 0,08) DEEP
FROM A .375 (9,53) DIA.
.500 ± .015
(12,7 ± 0,38)
TYP.
10
8
.250 + .001 –.002
(6,35 + 0,03 –0,05)
DIA.
TERMINAL DIMENSIONS AT THIS
POINT ARE .050 ± .005 (1,27 ± 0,13)
WIDE BY .020 ± .003 (0,51 ± 0,08) THICK
CIRCUIT DIAGRAM: PC Mount
1
9
.830
± .010
(21,08
± 0,25)
.750 ± .010
(19,05 ± 0,25)
TYP.
.375 ± .015
(9,53 ± 0,38) TYP.
.786 ± .010
(19,96 ± 0,25)
DIA.
GRAYHILL
.219
± .005
(5,56
± 0,13)
DIM. B REF.
STUD
PROJECTION
.174 ± .010
(4,42 ± 0,25)
4
1.000 ± .010
(25,4 ± 0,25)
DIA.
6
Standard Style
ADJUSTABLESTOP
WASHERS
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
SERIES 43
SERIES 54
1" Diameter, 1 Amp, Concentric
Shafts
Features
•Two Switches in the Panel Space
of a Single Shaft Rotary
•Military Qualified Versions
MIL-3786/04
•Choice of 10 Positions (Series 43) or 12 Positions (Series 54)
DIMENSIONS in inches (and millimeters)
Standard Style and Military Qualified
Rear Views
BUSHINGKEyWAy.066±.002(1,68±0,05)
WIDEBy.036±.003(0,91±0,08)DEEPFROM
A.375(9,53)DIA.
3/8-32UNEF-2ATHREAD
GRAyHILL
1.170±.015
(29,72±0,38)DIA.
OVERTERMINALS
.030 (0,76)
.030 (0,76)
.280 (7,11)
.030 (0,76)
.280 (7,11)
.280 (7,11)
.280 (7,11)
.280 (7,11)
.280 (7,11)
48
54
60
54
60
66
60
66
72
60
67
74
67
74
81
74
81
88
15°
10
9
GRAyHILL
.062 (1,57)
.062 (1,57)
.062 (1,57)
.062 (1,57)
.062 (1,57)
.312 (7,92)
.062 (1,57)
.312 (7,92)
.312 (7,92)
12
1.818 (46,18)
2.164 (54,97)
2.510 (63,75)
2.164 (54,97)
2.510 (63,75)
3.105 (78,87)
2.510 (63,75)
3.105 (78,87)
3.451 (87,66)
11
1
Series
54
2
Series
43
5
Style
M or H
6
Style
A
7
Style
A, M or H
3
Approx. Weight
Grams
8
1
1
1
2
2
2
3
3
3
Series 54
4
Number of
Decks
Dimension A
Dimension B
1
2
3
1
2
3
1
2
3
10
MILITARyNUMBERMARKEDONALL
QUALIFIEDSWITCHES
INTEGRALASSEMBLyNUT,DONOTREMOVE
Note: Common location for a single pole per
deck switch. For common location on
multi-pole switches, see circuit diagrams.
.064(1,63)MIN.DIA.
HOLEAFTERPLATING
30°
.064(1,63)MIN.DIA.
HOLEAFTERPLATING
Grayhill part number and date code marked on detent cover label. Customer part number
marked on request. Military part number marked when required.
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
SEENOTE
Section Section
“A”
“B”
36°
4
C
L OFBUSHING
KEyWAy
7
8
9
SECTION
SECTION
A
B
CONTROLLEDBy
.250(6,35).125(3,18)
DIA.SHAFT
NON-TURNTAB
.125±.003(3,18±0,08)WIDEBy
.031±.003(0,79±0,08)THICK
#1THREAD
.830(21,08)
SER.43
1.000(25,4)
SER.54
±.010(0,25)
.125+.001–.002
(3,18+0,03–0,05)DIA.
.250+.001–.002
(6,35+0,03–0,05)DIA.
1.015±.015
(25,78±0,38)
OVERTERMINALS
DIM.BREF.
STUD
PROJECTION
1
.093±.015(2,36±0,38)
SER.43
.121±.015(3,07±0,38)
SER.54
2
.250±.020(6,35±0,51)
Series 43
5
.642(16,31)
SER.54
.562(14,27)
SER.43
±.015(0,38)
DIM.A+.046–.020
(+0,05–0,51)
.375
±.020
(9,53
±0,51)
6
.094±.004
(2,39±0,10)
.219±.005
(5,56±0,13)
.375
±.020
(9,53
±0,51)
3
1.162(29,51)DIA.
SER.54
1.000(25,4)DIA.
SER.43
OFNON-TURN
C
L
.375 TAB
.250±.020
±.015
(6,35±0,51)
(9,53
±0,25)
.250±.020
(6,35±0,51)
Multi-Deck Rotary Switches
SERIES 43 and 54
1" Diameter, 1 Amp, Add-A-Pot
Features
•Central Shaft Designed to Operate an Add-On Potentiometer
•Potentiometer Mounting Plates Provided
•Adjustable Stop Standard, Fixed Stop by Order
•Choice of 10 Positions (Series 43) or 12 Positions (Series 54)
DIMENSIONS In inches (and millimeters)
Standard Style
Rear Views
Series 43
.375
±.020
(9,53
±0,51)
DIM.A+.046–.020
(+0,05–0,51)
.375
±.020
(9,53
±0,51)
.625±.046
(15,88±1,17)
C OFNON-TURN
.375 L
TAB
±.015
(9,53
.250±.020
±0,38)
(6,35±0,51)
.250±.020
(6,35±0,51)
7
.140±.062
(3,56±1,57)
#1THREAD
8
10
5
4
T
RS
FI TOP
S
2
3
7
1
12
1
15°
2
60
67
74 3
9
4
48
54
60
10
5
.974 (24,74)
1.320 (33,53)
1.666 (42,32)
11
6
6
Approx. Weight
Grams
Dimension
A
Series 43 Series 54
7
F
ST IRST
OP 1
2
3
1.170±.015
(29,72±0,38)
OVERTERMINALS
8
11
5
Series 54
Note: Common location for a single pole per
deck switch. For common location on
multi-pole switches, see circuit diagrams.
30°
2
3
4
.642±.015
(16,31±0,38)
Two potentiometer mounting plates are
supplied. Mounting plates have .261 (6,63)
and .380 (9,65) diameter holes respectively
for mounting potentiometers with 1/4" and 3/8"
bushings. Additional nuts for the through bolts
of the switch are provided for adjustment of
mounting plate location. Tapered tongue on
1
/8" shaft provides coupling to screwdriver slots
in potentiometer shafts.
2
3/8-32UNEF-2ATHREAD
Number
of
Decks
10
4
USEOFKNURLEDNUT
OPTIONAL
NON-TURNTAB
.125±.003(3,18±0,08)WIDEBy
.031±.003(0,79±0,08)THICK
9
.064(1,63)MIN.DIA.
HOLEAFTERPLATING
STOPWASHERS
1.162±.010
(29,51±0,25)
DIA.
5
36°
SEENOTE
Series 54
6
.125+.001–.002
(3,18+0,03–0,05)DIA.
.250+.001–.002
(6,35+0,03–0,05)DIA.
7
9
.830(21,08)SER.43
1.000(25,4)SER.54
±.010(0,25)
9
Rotary Switches
.562
±.015
(14,27
±0,38)
8
1.015±.015
(25,78±0,38)
OVERTERMINALS
8
6
.094±.004
(2,39±0,10)
.219±.005
(5,56±0,13)
Series 43
.093±.015(2,36±0,38)
SER.43
.121±.015(3,07±0,38)
SER.54
.250±.020(6,35±0,51)
3
1.000±.010
(25,4±0,25)
DIA.
Plated brass spacers for ease of positioning
mounting plate driving assembly are available
on special request (sold only with switches). The
use of spacers is recommended for other than
prototype requirements. When ordering switches
with spacers, give full details regarding special
length, potentiometer being used, etc.
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
Standard style, concentric shaft, add-a-pot
switches have adjustable stops. See Adjustable
Stop description.
Grayhill part number and date code marked on detent cover
label. Customer part number marked on request. Military
part number marked when required.
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
SERIES 54
1" Diameter, 1 Amp, Add-A-Pot
Features
•Military Qualified MIL-3786/04
•Central Shaft Designed to Operate MIL Potentiometer
•Mounting Plate Options Provide Choice of Potentiometer
•Fixed Distance from Switch to Mounting Plate
DIMENSIONS In inches (and millimeters)
Military Qualified Style
DIM.A+.046–.020
(+0,05–0,51)
.250±.020
(6,35±0,51)
.121±.015
(3,07±0,38)
.575
(14,61)
REF.
.140±.062
(3,56±1,57)
#1
THREAD
1.024 (26,01)
1.370 (34,80)
1.716 (43,59)
12
1
BUSHINGKEyWAy.066±.002(1,68±0,05)
WIDEBy.036±.003(0,91±0,08)DEEPFROM
A.375(9,53)DIA.
Potentiometer Mounting
Approximate Weight
Grams
The two mounting plates shown below are supplied with
each switch.
60
67
74
27.5
±2
.245 ± .003
(6,22 ± 0,08) R.
Series 54M Add-A-Pot Switch is a concentric
shaft unit with provision for potentiometer
mounting. Outer shaft operates switch decks.
Inner shaft terminates in tapered tongue,
which allows any desired potentiometer to be
mounted.The Series 54M Add-A-Pot is qualified
to MIL-DTL-3786/4-3. Patent No. 3,297,830.
Grayhill part number and date code marked on detent
cover label. Customer part number marked on request.
Military part number marked when required.
30°
.098 ± .003
(2,49 ± 0,08) DIA. (3)
.130 ± .003
(3,30 ± 0,08)
DIA. (2)
.437 ± .003
(11,10 ± 0,08) R.
15 ± 2
.380 ± .003
(9,65 ± 0,08)
DIA. (1)
THROUGH BOLT
HOLE (2 EA.)
15
±2
1.265
(32,13)
DIA.
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
Mounting Plate A
.261 ± .003
(6,63 ± 0,08) DIA. (1)
.375 ± .003
(9,53 ± 0,08) R.
9
±2
1.265
(32,13)
DIA.
.531 ± .003
(13,49 ± 0,08) R.
Mounting Plate B
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
1
2
3
SEE
POTENTIOMETER
MOUNTING
INTEGRALASSEMBLyNUT,
DONOTREMOVE
3/8-32NEF-2ATHREAD
Note: Common locations for a single pole per
deck switch. For common location on
multiple switches, see circuit diagram.
15°
GRAyHILLORCUSTOMERPARTNUMBER
MARKEDONSWITCHCOVERUPONREQUEST.
MILITARyNUMBERMARKEDONALL
QUALIFIEDSWITCHES
NON-TURNTAB
.125±.003(3,18±0,08)WIDEBy
.031±.003(0,79±0,08)THICK
Number
of
Dimension
Decks
A
9
6
.018±.005(0,46±0,13)
.052±.005(1,32±0,13)
10
7
.642
±.015
(16,31
±0,38)
11
8
.219±.005
(5,56±0,13)
1.000
±.010
(25,4
±0,25)
2
(6,35±0,51)
.125+.001–.002
(3,18+0,03–0,05)DIA.
.250+.001–.002
(6,35+0,03–0,05)DIA.
1.170±.015
(29,72±0,38)
OVERTERMINALS
3
.375
±.020
(9,53
±0,51)
4
.375
±.020
(9,53
±0,51)
5
1.162±.010
(29,51±0,25)
DIA.
C
L OFNON-TURN
TAB
.375
±.015
(9,53
±0,38)
.250±.020
Multi-Deck Rotary Switches
Military Qualified
Single Shaft Switches
The military styles of the single shaft Series
42 and 44 rotary switches are qualified to MILDTL-3786/4, specifically SR04-1. Qualification
includes two temperature ranges. Unsealed
styles M, MB, MG and MBG are qualified for -65
to 85°C. Unsealed styles H, HB, HG and HBG,
plus sealed styles HS, HBS, HGS and HBGS
are qualified for -65°C to 125°C. Qualification
includes low level switching and shaft grounding
as specified in MIL-DTL-3786. Qualification
includes 30°, 36°, 45°, 60° and 90° angles of throw
with solder lug terminals. The military styles are
dimensionally the same as the standard styles
with two exceptions. The location of the common
for the 3-pole switch differs (see circuit diagrams)
and the non-turn tab for styles HS, HBS, HGS
and HBGS differs per the Shaft and Panel Seal
description following.
Two Switches, Concentric Shafts
The M style of the concentric shaft Series 43
and 54 switches is qualified to MIL-DTL-3786/4,
specifically SR04-2. Unsealed switches are
qualified for -65°C to 85°C in 30°, 36°, 45°,
60° and 90° throws. The standard and military
styles of the concentric switches have the same
dimensions with the exception of the location of
the 3 pole common (see circuit diagrams). The
30° and 36° throws are described in the ordering
information. If the 45°, 60° and 90° throws are
required, they can be provided in Section A of
the Series 54 Rotary Switches; see Standard
Options, page J-9.
Add-A-Pot Switches
The military style of the add-a-pot Series 54
switch is qualified to MIL-DTL-3786/4, specifically
SR04-3. These unsealed switches are qualified
for -65°C to 85°C in 30°, 45°, 60° and 90° throws.
The dimensions of the military style add-a-pot
switches are not the same as the standard adda-pot switches; see drawings.
All Qualified Switches
Complete electrical ratings and characteristics
for all of these qualified switches are listed on
the following pages. Standard variations such
as terminals, shaft and/or bushing length etc.,
which do not affect performance, can be marked
as qualified product. Adjustable stops cannot
be qualified. Contact Grayhill for details about
variations.
Military qualified switches may be ordered by the
military M number listed in MIL-DTL-3786/4 or
by the Grayhill part number. They will be marked
to specifications.
Military Qualified Shaft and
Panel Seal:
Styles HS, HBS, HGS and HBGS
The shaft is sealed to the bushing by an internal
O-ring per MIL-P-5516B. The bushing is sealed
to the panel with a silicone rubber washer and
a stainless steel backing washer. The combined
uncompressed thickness is 0.055" (1,40). Since
this switch has a flat cover, a non-turn washer is
supplied (see Panel Seal Kit). If using it, mount
it in front of the panel.
Specifications:
Electrical Ratings
Rotary Switches
115 Vac resistive
6-28 Vdc resistive
115 Vac inductive
115 Vdc inductive
6-28 Vdc inductive
115 Vdc resistive
30° or 36°
1 amp
1 amp
0.25 amp
0.02 amp
0.10 amp
0.10 amp
Angle of Throw
45° or 60°
90°
5 amps 5 amps
1 amp
2 amps
2 amps 2 amps
—
—
—
—
—
—
To carry 10 amps continuously.
Contact Resistance: 50 milliohms maximum
Insulation Resistance: 1,000 megaohms
minimum
Voltage Breakdown: 1,000 Vac initially (500
Vac or better after most environmental tests)
Life Expectancy: 100,000 mechanical cycles
of operation. Note: Actual life is determined
by a number of factors, including electrical
loading, rate of rotation and environment, as
well as maximum voltage breakdown required
at the end of life.
UL Recognition–
Styles UA, UD, UM, UP, US and USP
Grayhill styles A and M and their variations (D, P,
S and SP) of the Series 42, 43, 44 and 54 rotary
switches have been tested by Underwriters
Laboratories. The letter U in the style indicates
proper marking as required by Underwriters
Laboratories. These switches are recognized
under file number E35289. The UL rating for the
Series 42, 43, 44 and 54 is as follows:
Electrical Parameters: style UA = 1.0 ampere
at 125 Vac. Style UM = 1.0 ampere at 125 Vac
and also .5 ampere at 125 Vac, inductive load,
0.75 to 0.8 power factor.
Rating based on the following criteria:
Overload: 50 operations at 150% rated AC
load
Endurance: 6000 operations at the rated load
with 1000 Vac dielectric strength before and
after test
Temperature Rise: Not to exceed 30°C when
carrying rated AC load after test.
Note: all dimensional drawings for the standard
style Series 42, 43, 44 and 54 also apply to these
switches, with the exception that switches are
marked per specifications.
Electrical Ratings
Military Style
General Rating: This rating is based on standard
Grayhill tests of the Military style switch done at
ambient conditions. It is provided for comparison
to the Standard Style switch.
Charts shown for non-shorting contacts (break
before make)
7
CURRENT(AMPS)
Rated: To make and break the following
loads:
6
5
VOLTAGE115VAC
RESISTIVE
4
3
2
1
0
0
10
25
50
CyCLESx1,000
1.7
CURRENT(AMPS)
Standard Style
1.5
VOLTAGE30VDC
RESISTIVE
1.2
1.0
.75
INDUCTIVE
(2.8HENRIES)
.50
.20
0
0
10
25
50
CyCLESx1,000
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
Voltage and Load: As listed in the chart
One cycle is 360° rotation and a return through
all switch positions to the starting position. The
data for the curves was measured at sea level,
25°C and 68% relative humidity.
The Series 42, 43, 44 and 54, style M, H and
HS switches are made to meet requirements
of MIL-DTL-3786, style SR04. Diallyl phthalate
molded parts and the design of internal
switching elements provide exceptional
performance.
Curves shown are typical load-life curves for
Series 42, 43, 44 and 54, style M, H and HS
switches with 30° or 36° angles of throw. They
show the numbers of cycles of rotational life
expectancy for the types of loads shown. Thus,
with a 5 amp, 115 Vac resistive load, 10,000
cycles of life is expected. If the load is reduced
to 3 amps, life is increased to 25,000 cycles.The
larger angles of throw (45°, 60° or 90°) switch
larger currents for a like number of cycles.
Life limiting or failure criteria for these curves
are:
C o n t a c t R e s i s t a n c e : 5 0 milliohms
maximum
Insulation Resistance: 1,000 megaohms
minimum between mutually insulated parts
Voltage Breakdown: 1,000 Vac minimum
between mutually insulated parts. These
switches will carry 10 amps with maximum
contact temperature rise of 20°C. Life can
be predicted by Grayhill if less critical life
characteristics, elevated temperature or
reduced pressure is involved.
MIL-S-3786 Electrical Values
Military Style
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
specifications:
Style M switches, at 85°C, approximately 68%
humidity and sea level pressure and style H
and HS at 125°C have been tested to make
and break the following loads as stated in
MIL-DTL-3786/SR04; 250 milliamperes at
28 Vdc resistive, 100 milliamperes at 28 Vdc
inductive (2.8 henries); 75 milliamperes at 115
Vac resistive.
These switches have also been tested at
reduced barometric pressure (70,000 feet),
25°C at approximately 68% relative humidity to
make and break the following loads as stated
in MIL-DTL-3786/SR04; 200 milliamperes,
28 Vdc resistive; 25 milliamperes, 28 Vdc
inductive (2.8 henries); 20 milliamperes, 115
Vac resistive. When tested to these loads and
conditions the style M, H and HS switches
meet the following life limiting or failure criteria
after 25,000 cycles in accordance with MILS-3786.
Contact Resistance: 50 milliohms
maximum
Insulation Resistance: 1,000 megaohms
minimum between terminals and shafts
Dielectric Strength: 1,000 Vac (atmospheric
pressure) and 450 Vac (reduced pressure)
minimum between mutually insulated parts.
Bases: Melamine per (MIL-M-14) ASTM-D5948
Cover, Deck Separators, End Plate and Rotor
Mounting Plate: Phenolic per (MIL-M-14)
ASTM-D-5948
Mounting Bushings: Brass, tin/zinc-plated.
Shaft, Cover Plate, Retaining Rings,Through
Bolts, Shaft Extensions, Stop Arm, Thrust
Washers Stop Washers and Rear Support
Plate: Stainless Steel
Detent Balls: Steel, nickel-plated
Detent Springs: Tinned music wire
Rotor Contact, Stator (Base) Contacts:
Silver alloy
Terminals (Except Common): Brass, tin
plated
Common Plate, Including Solder Lug: Brass,
silver-plated .0003" minimum
Mounting Hardware: Two mounting nuts .094"
(2,39) thick by .562" (14,27) across flats and
one internal tooth lockwasher are supplied with
each switch.
Stud Nuts, Mounting Nuts, Lock Washers:
Tin/zinc-plated or stainless steel.
Materials and Finishes
Military Qualified
Bases: Diallyl per (MIL-M-14) ASTM-D-5948
Cover, Deck Separators, End Plate and
Rotor Mounting Plate: Diallyl per (MIL-M-14)
ASTM-D-5948
These switches also meet MIL-DTL-3786/
SR04 for moisture resistance, medium and
high shock, vibration (10 to 2000 cps), thermal
shock (-65°C to 125°C), salt spray, explosion
and terminal pull. Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
Mounting Bushings: Brass, tin/zinc-plated.
Shaft, Cover Plate, Retaining Rings,
Through Bolts, Shaft Extensions, Stop Arm,
Stop Washers, Thrust Washers and Rear
Support Plate: Stainless steel
Detent Balls: Steel, nickel-plated
Detent Springs: Tinned music wire
Rotor Contact: Silver alloy
Terminals, Common Plate including Solder
Lug: Brass, silver-plated .0003" minimum
Mounting Hardware: Two mounting nuts .094"
thick by .562" across flats and one internal tooth
lockwasher are supplied with each switch.
Stud Nuts, Mounting Nuts, Lock Washers:
Tin/zinc-plated or stainless steel.
Additional Characteristics
Standard Style and Military Qualified
Contact: Shorting or non-shorting wiping
contacts with over 150 grams of contact
force
Rotational Torque: 8-115 ounce-inches
depending upon the number of poles per deck,
number of decks and angle of throw
Mechanical Life Expectancy: 100,000 cycles
of operation
Shaft Flat Orientation: Flat opposite
contacting position of pole number one (See
circuit diagram).
Stop Strength: For Standard style: 15 poundinches minimum. For Adjustable stop styles:
12 pound-inches
Extended Stud: Single shaft switches of six or
more decks and concentric shaft switches of a
combination of five or more decks (Standard
style) or four or more decks (Military style)
have longer studs with extra mounting nuts for
recommended double end mount.
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
When tested at sea level 25°C and 68% relative
humidity with failure criteria of 50 milliohms
max. and 750 Vac breakdown voltage, these
switches will make and break the following
loads: 250 mA at 28 Vdc, inductive (2.8 henries);
1.25 amps at 28 Vdc resistive; 2.0 amps at 115
Vac, 60 Hz resistive, for 10,000 cycles.
Materials and Finishes
Standard Style
Multi-Deck Rotary Switches
Choices and limitations: Series 42, 43, 44 and 54
A = Standard, Solder Lugs
P = Standard, PC Mount Terminals
D = Standard, Adjustable Stops
H = Military Qualified, 125°C
B = Military, Grounded Shaft
G = Military, Low Level Rating
S = Shaft and Panel Seal
U = UL Recognized
M = Military Qualified 85°C4
Single Shaft Switches
Style Choices
Angle of
SeriesUnsealed Shaft/Panel SealThrow
Number of
Decks
36°
42
Poles
Per Deck
Positions
Per Pole1,3
Shorting or
Non-Shorting
01 thru 12
01 thru 12
1
2
02 thru 103
02 thru 05
N or S
N or S
30°
01 thru 12
01 thru 12
01 thru 08
01 thru 06
01 thru 04
01 thru 04
1
2
3
4
5
6
02 thru 123
02 thru 06
02 thru 04
02 or 03
02
02
N or S
N or S
N or S
N or S
N or S
N or S
45°
01 thru 12
01 thru 06
01 thru 04
01 thru 03
1
2
3
4
02 thru 083
02 thru 04
02
02
N or S
N or S
N
N
60°
01 thru 12
01 thru 06
01 thru 04
1
2
3
02 thru 063
02 or 03
02
N
N
N
90°
01 thru 12
01 thru 06
1
2
02 thru 043
02
N
N
30°
01 thru 12
01 thru 12
01 thru 08
01 thru 06
1
2
3
4
AJ (2 thru 12)1
AJ (2 thru 6)1
AJ (2 thru 4)1
AJ (2 or 3)1
N or S
N or S
N or S
N or S
36°
01 thru 12
01 thru 12
1
2
AJ (2 thru 10)1
AJ (2 thru 5)1
N or S
N or S
36°
01 thru 12
1
02 thru 103
N or S
A UA UM5
M MB
MG
MBG
H HB HG
HBG
44
S
US
—
MS4
MBS4
MGS4
MBGS4
HS
HBS
HGS
HBGS
Rotary Switches
44
D UD —
—
42
P UP 42
SP
USP
Concentric Shaft Switches
Series
Style Angle ofSection A (Front)Section B (Rear)
ChoicesThrow
Decks
Poles Position
N or S Decks Poles
Position
N or S
CONCENTRIC SHAFT, 2 SWITCHES
54
A2
UA2
M2
43
30°
01 thru 03
01 thru 03
1
2
36°
01 thru 03
1
30°
01 thru 03
01 thru 03
36°
30°
02 thru 123
02 thru 06
N or S
N or S
01 thru 03
01 thru 03
01 or 02
01
01
01
1
2
3
4
5
6
02 thru 123
02 thru 06
02 thru 04
02 or 03
02
02
N or S
N or S
N or S
N or S
N or S
N or S
02 thru 105
N or S
01 thru 03
01 thru 03
1
2
02 thru 103
02 thru 05
N or S
N or S
1
2
AJ (2-12)1
AJ (2-6)1
N or S
N or S
01 thru 03
1
AJ (2-10)1
N or S
01 thru 03
01 thru 03
1
2
02 thru 125
02 thru 06
N or S
N or S
ADD-A-POT
SWITCHES
54
43
54
D
UD
M
For Adjustable Stop (with the letter D), use AJ
instead of number of positions when ordering.
2
For 45°, 60° or 90° throws in Series 54 switches
of these styles, see Standard Options.
3
For single pole switches with the maximum
positions per pole, continuous rotation is possible.
Specify fixed stop or continuous rotation when
ordering single shaft switches. Concentric shaft
switches have continuous rotation.
1
Second shaft operates a potentiometer
supplied by the customer.
Rear mounting plates are provided.
Styles which include both M and S are not
qualified but are made of the same materials
and construction as qualified types. For qualified
switches with shaft and panel seal, use equivalent
HS style.
5
UM switches are made of the same materials and
construction as the M style switches. For military
switch UM is not required; use M style.
4
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Multi-Deck Rotary Switches
Accessories
Internal Tooth Lockwasher–Figure A
For a 3/8" bushing. Approximately 0.500" (12,7)
outside diameter, .022" (0,56) thickness.
Material is cadmium-plated steel. Part No.
12Q1272-1
For a 1/4" bushing. Approximately
0.400" (10,16) outside diameter,
.018" (0,46) thickness. Material is
FIGuRE A
steel, tin/zinc plated.
Non-Turn Washer–Figure B
Can be ordered as extra hardware for the Series
5000, 24, 42, 43, 44, 54, 71B, 53, 57 and 59
rotary switches. The internal key of the washer
slides into the bushing keyway. The right angle
tab locks into a predrilled hole on the back side
of the mounting panel. Material is brass, tin/zinc
plated. Part No. 12C1087-1
bushing to the panel. The kit consists of four
items: a grooved hex nut, a keyed washer, a
keyed seal and a non-turn washer. Assembly is
described on Page J-53. Dimensions of panel seal
kit items are shown in Figure C. This kit seals the
bushing to the panel; it does not seal the shaft
to the bushing. Not usable with adjustable stop
switches. Part No. 42-24
.625±.010
(15,88±0,25)DIA.
.375+.004–.000
(9,53+0,10)DIA.
.375±.005
(9,53±0,13)
CL
Panel Seal Kit–Figure C
.125±.003
(3,18±0,08)
Non-turn Washer
Sold as a separate item to seal the switch
.060±.002
(1,52±0,05)
.154
+.004
–.000
(3,91
+0,10
–0,00)
DIA.
.625±.010
(15,88±0,25)
DIA.
.376+.003–.000
(9,55+0,08–0,00)
DIA.
.437±.010
(11,10±0,25)
.032±.002
(0,81±0,05)
.125±.010
(3,18±0,25)
.120±.003
(3,18±0,08)
FIGuRE B
.032
±.002
(0,81
±0,05)
.045±.003
(1,14±0,08)
.562(14,27)
ACROSS
FLATS
.010±.002
(0,25±0,05)
.187±.010
(4,75±0,25)
.088(2,24)/
.093(2,36)
Seal
FIGuRE C
Keyed Washer
Hex Nut
ORDERING INFORMATION: Single Shaft Switches, Add-A-Pot Switches
44M30–02–1–12N–F
Stop Arrangement: Add letter F to a one pole per deck switch with the maximum number of positions for a
stop between position 1 and the last position. Leave blank for continuous rotation
Type of Contacts: N = Non-shorting; S = Shorting
Positions Per Pole: Requires 02 positions as a minimum to maximum allowable dependent on the angle of
throw and poles per deck. Use AJ for adjustable stops (Styles D and UD).
Poles Per Deck: As limited by angle of throw, switch series and style
* All rotary switches that are required to have military designated markings and testing adhering to MIL-3786 are to be ordered by specifying
the military part number identified on the appropriate slash sheet.
ORDERING INFORMATION: Concentric Shaft Rotary Switches
Series: Determined by the angle of throw, applicable to both sections
Style*:
Letter(s)
from the Choices and Limitations chart
Section A (front)
Number of Decks: As limited by the number of poles per deck
Poles Per Deck: As limited by the angle of throw
Positions Per Pole: Requires 02 positions as a minimum to the maximum allowable dependent on the
angle of throw and the poles per deck
Type of Contacts: N=Non-shorting, S=Shorting. All one pole per deck switches with the maximum number
of positions are continuous rotation
43M02110N–M03203S
Section B (rear)
The limitations listed for Section A apply to Section B
Type of Contacts
Positions Per Pole
Poles Per Deck
Number of Decks
Style
* All rotary switches that are required to have military designated markings and testing adhering to MIL-3786 are to be ordered by specifying the military part number identified on the appropriate slash sheet.
Available from your local Grayhill Distributor
For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill.
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois
60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Rotary Switches
Series: Determined by the type of switch and
the angle of throw
Style*: Letter(s) from the Choices and Limitations chart
Angle of Throw: Must agree with Series Number
Number of Decks: As limited by the angle of throw, the poles per deck, switch style and type of contacts