Features Introduction ● Support 2-channel stereo audio without compression ● Data formats: left justified, 12S ● Optional S/PDIF transmit ● Audio resolution: 16/24 bits ● Sampling rate 44.1/ 48/ 96/ 192KHz ● High SNR and THD+N ● Short audio latency (TX to RX = 15ms~2S ) ● Configurable delay time ● Support multicast or multiple unicast ● IR blaster ● Multiple pairs of TX to RX ● L-ch & R-ch synchronization control Averlogic audio board supports Ethernet interface, core chip uses AL9M80x solution for Ethernet or Power Line real-time streaming of no-compress stereo audio. The AL9M80x chip, supports 16/24 bits with 44.1K/ 48K/ 96K/ 192KHz sample rate, I2S, and MII interface. Audio data formats support Left Justified, I2S with external SDRM as data buffer. This demo board has Ethernet Port interface that enables audio transmission by direct Ethernet connection, by external PLC adapters (Ethernet interface), or by Home PNA. The EVB Kit includes a pair of external PLC adapters (Ethernet to Powerline), which users can optionally test audio quality through PLC. Specifications I/O of TX Module I/O of RX module Analog Audio Mode System Input Output Input Output Audio Input Audio Channel Sampling Rate Resolution Analog Signal Level Frequency Response SNR Dynamic Range THD+N Channel Separation TX Analog Input Impedance RX Analog Output Impedance S/PDIF Audio Mode System PCM Mode Data Mode Sampling Rate Data Format S/ PDIF Connector Network Transmission Transmission Media PLC-to-Ethernet Bridge Power Power Consumption Environment Physical Dimensions Video QoS Latency Time Multicast Power adapter TX module RX module Temperature Transmitter Receiver Audio: two channels L/R-RCA; one channel S/PDIF Ethernet: one port Ethernet: one port Audio: two channels L/R-RCA; one channel S/PDIF L/R stereo input (RCA connector) Two channels 48KHz or 96KHz selectable 16-bit or 24-bit selectable TX input maximum 3Vpp; RX output maximum 3Vpp 20Hz ~ 22KHz ±0.2dB(fs=48KHz); 20Hz ~ 40KHz±0.2dB (fs=96KHz) 105dB (typical)* 105dB (typical)* 96dB (typical)* 48KHz sampling 102dB at 1KHz, -1dB full scale* 15KOhm (typical)* 10KOhm (typical)* * Note: Reference data provided by AK5381 ADC and WM8728 DAC. Two channels AC3/ dts/ other compressed data 32KHz, 44.1KHz, 48KHz, 96KHz or 192KHz 24-bit I2S, 16-bit I2S, 24-bit left justified or 16-bit left justified TX: 75Ohm coaxial cable RX: 75Ohm coaxial cable Ethernet (optional external PLC adapter) Compatible PLC bridge: HomePlug 1.0, Turbo, HomePlug AV, DS2, Panasonic-HD-PLC Hard-wired latency TX to RX =15ms~2S Support one TX to (Max) 4 RX DC- 6 ~ 7.5V/ 1A DC- 7.5V ~ 6.0V/ 500mA (typical) DC- 7.5V ~ 6.0V/ 510mA (typical) Operating: 10~55(°C); storage : -20~ -70(°C) 102(W) x 100(L) x 15(H) mm 102(W) x 100(L) x 15(H) mm Block Diagram TX Board: AL9M802B-EVB-A-210N RX Board: AL9M802B-EVB-A-211N Application Scenario Scenario 1: One-to-One Transmission Audio Amplifier Scenario 2: One-to-Two Embedded Transmission Application Ordering Information ● User manual EVB: ● A pair of Ethernet to Powerline adapters AL9M802B-EVB-A-210N (TX module) AL9M802B-EVB-A-211N (RX module) *A pair of Audio EVB(TX + RX modules) Design Kits: AL9M802B-SDK-A-21 ● Free one pair of Audio TX + RX (including PLC adapters) ● Application notes of SW and HW ● Schematic (DSN), Layout guide, Gerber file ● BOM list ● Brief AL9M802 datasheets ● Free sample 12pcs of AL9M802 chip