PCIT40 Power Chip Shielded Inductors Dimensions (In.) A F C 1st E 2nd B 3rd D I G Features H A B C D E F G H I PCIT40 .510 Max. .370 Max. .200 Max. .100 .100 .300 .290 .115 .110 Allied Part Number Inductance @0Adc(µh) DCR Max. (Ω) SRF Typical (MHz) PCIT40-1R0M 1.0 .025 60 .50 5.0 9 1 PCIT40-1R5M 1.5 .030 55 .70 5.0 12 1 PCIT40-2R2M 2.2 .035 55 1.0 5.0 15 1 PCIT40-3R3M 3.3 .040 50 1.5 5.0 16 1 PCIT40-4R7M 4.7 .045 45 2.0 3.0 10 1 PCIT40-6R8M 6.8 .050 40 4.0 2.5 14 1 PCIT40-100M 10 .055 35 5.0 2.0 11 1 PCIT40-150M 15 .060 25 6.0 1.8 12 1 inductance range. PCIT40-220M 22 .084 22 10 1.5 11 1 Test Frequency : Inductance measured PCIT40-330M 33 .090 18 12 1.3 13 1 PCIT40-470M 47 .11 16 27 1.0 13 1 PCIT40-680M 68 .15 12 40 .90 17 1 PCIT40-101M 100 .29 9 50 .80 15 1 Physical PCIT40-151M 150 .36 8 80 .60 15 .5 Marking: Color Code using standard EIA PCIT40-221M 220 .39 6 90 .50 10 .5 PCIT40-331M 330 .73 5 150 .40 13 .5 PCIT40-471M 470 .88 4 200 .35 13 .5 PCIT40-681M 680 1.15 3 300 .30 13 .5 PCIT40-102M 1000 1.45 2.5 420 .25 13 .5 • Shielded which allows for high mounting density • Cost effective design Max. Inductance* Rated Max. Energy Switching Current** Storage (µh) (A) (µJoules) Freq. (MHz) • Flat top for pick and place assembly • Wide inductance range • Designed for reflow solder mounting Electrical Inductance Range: 1.0µh 10 1000µh. Tolerance: ± 20% over the entire at 100KHz, 0 amps dc. Operating Temp. Range: i-40° to +85°C.ll 0 to 2000) x 10 -6°C. three dot system. Packaging: 1000 pieces per 13 inch reel. *Measured at the rated current. Refer to curves on page 35 for more detail. **Average maximum allowable current. PCIT Series inductors are designed for current spikes as high as 2x the current rating. All specifications subject to change without notice. ALLIED COMPONENTS INTERNATIONAL 14712 SINCLAIR CIRCLE TUSTIN, CALIFORNIA 92780 714/665-1140 800/295-3800 FAX 714/665-1150 34