PCS45 Power Chip Shielded Inductors Dimensions (In.) A C PCS45 D E A .456 ± .015 B .496 ± .015 C .197 ± .02 B F D .630 Max. E .236 ± .012 F .118 ± .008 Features • Small size allows for high mounting density • Suitable for Reflow Solder • Large DC current capability with low DC resistance • Embossed carrier tape available • Polarity identification available • Custom inductances available Characteristics Operating Temp.: -30° to +100°C. External Appearance: Clean & no external defects by visual inspection Terminal Strength: After soldering, push the coils will withstand the followings without falling off. 20.0N 20 sec. Heat Endurance: Heat at 150°C for 3 minutes; then 200°C for 25 seconds. No mechanical or electrical defect after that when back at room temperature. Insulation: Over 100M ohm at 100 VDC (coil and core). Dielectric: 100VDC for one minute (coil and core). Temperature Characteristics: (0 to 2000) x 10 -6°C. Environmental Humidity: Deviate +/-5%, after 96 hours in 90-95% relative humidity at 40°C and 1 hour of drying. Vibration: Deviate +/-5%, vibration of 1 hour, three direction; 10-55-10 Hz; 1.5mm p-p amplitude. Shock: Deviate 5% after drop down 100G shock attitude of one time in each direction. Physical Packaging: 500 per 13 inch reel. Allied Part Number Inductance (µh) Tolerance (%) Test Freq. (MHz) DCR Max. (Ω) Rated Current (A) PCS45-100M 10 20 2.52 0.05 2.50 PCS45-120M 12 20 2.52 0.06 2.40 PCS45-150M 15 20 2.52 0.07 2.30 PCS45-180M 18 20 2.52 0.08 2.20 PCS45-220M 22 20 2.52 0.09 2.10 PCS45-270M 27 20 2.52 0.10 2.00 PCS45-330L 33 15 2.52 0.11 1.90 PCS45-390L 39 15 2.52 0.12 1.80 PCS45-470L 47 15 2.52 0.14 1.60 PCS45-560L 56 15 2.52 0.15 1.40 PCS45-680L 68 15 2.52 0.18 1.30 PCS45-820L 82 15 2.52 0.20 1.20 PCS45-101L 100 15 1KHz 0.28 1.10 PCS45-121L 120 15 1KHz 0.32 0.97 PCS45-151L 150 15 1KHz 0.38 0.86 PCS45-181L 180 15 1KHz 0.50 0.84 PCS45-221L 220 15 1KHz 0.58 0.72 PCS45-271L 270 15 1KHz 0.78 0.65 PCS45-331L 330 15 1KHz 0.92 0.61 PCS45-391L 390 15 1KHz 1.04 0.58 PCS45-471L 470 15 1KHz 1.18 0.50 PCS45-561L 560 15 1KHz 1.52 0.48 PCS45-681L 680 15 1KHz 1.80 0.43 PCS45-821L 820 15 1KHz 2.04 0.38 *Inductance drop no more than 10% at rated current applied or temperature rise ∆ t = 40°C. All specifications subject to change without notice. ALLIED COMPONENTS INTERNATIONAL 14712 SINCLAIR CIRCLE TUSTIN, CALIFORNIA 92780 714/665-1140 800/295-3800 FAX 714/665-1150 42